[v14,1/5] PCI/ERR: Update error status after reset_link()
diff mbox series

Message ID 813bc63708dd8b7b2bb916a2c436486835013be5.1581119844.git.sathyanarayanan.kuppuswamy@linux.intel.com
State New
Headers show
Series
  • [v14,1/5] PCI/ERR: Update error status after reset_link()
Related show

Commit Message

Kuppuswamy Sathyanarayanan Feb. 8, 2020, 12:03 a.m. UTC
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses
reset_link() to recover from fatal errors. But during fatal error
recovery, if the initial value of error status is
PCI_ERS_RESULT_DISCONNECT or PCI_ERS_RESULT_NO_AER_DRIVER then
even after successful recovery (using reset_link()) pcie_do_recovery()
will report the recovery result as failure. So update the status of
error after reset_link().

Fixes: bdb5ac85777d ("PCI/ERR: Handle fatal error recovery")
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Keith Busch <keith.busch@intel.com>
---
 drivers/pci/pcie/err.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

Patch
diff mbox series

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index b0e6048a9208..71639055511e 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -204,9 +204,11 @@  void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
 	else
 		pci_walk_bus(bus, report_normal_detected, &status);
 
-	if (state == pci_channel_io_frozen &&
-	    reset_link(dev, service) != PCI_ERS_RESULT_RECOVERED)
-		goto failed;
+	if (state == pci_channel_io_frozen) {
+		status = reset_link(dev, service);
+		if (status != PCI_ERS_RESULT_RECOVERED)
+			goto failed;
+	}
 
 	if (status == PCI_ERS_RESULT_CAN_RECOVER) {
 		status = PCI_ERS_RESULT_RECOVERED;