Patchwork [U-Boot] Please pull u-boot-ti/master

login
register
mail settings
Submitter Sandeep Paulraj
Date Nov. 3, 2011, 4:54 p.m.
Message ID <1320339284-8145-1-git-send-email-s-paulraj@ti.com>
Download mbox
Permalink /patch/123469/
State Superseded
Headers show

Pull-request

git://git.denx.de/u-boot-ti.git master

Comments

Sandeep Paulraj - Nov. 3, 2011, 4:54 p.m.
Albert,
	Please pull u-boot-ti/master

Regards,
Sandeep


The following changes since commit ce5207e191c59b3135303fd03b98dd2ac3701ba2:
  Kyle Moffett (1):
        e1000: Allow direct access to the E1000 SPI EEPROM device

are available in the git repository at:

  git://git.denx.de/u-boot-ti.git master

Bastian Ruppert (4):
      Davinci: ea20: set console on UART0
      Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch for console
      Davinci: ea20: add gpio for keeping power on in board_late_init
      Davinci: ea20: add gpios for LCD backlight control

Christian Riesch (1):
      arm, davinci: Add function lpsc_syncreset()

Heiko Schocher (13):
      arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD
      arm, arm926: fix missing symbols in NAND_SPL mode
      usb, davinci: add enable_vbus() weak function
      arm, usb, davinci: make USBPHY_CTL register configurable
      net, davinci_emac: make clock divider in MDIO control register configurable
      spl: add option for adding post memory test to the SPL framework
      arm, davinci: add support for new spl framework
      spl, nand: add 4bit HW ecc oob first nand_read_page function
      arm, davinci: add header files for dm365
      arm, davinci: add lowlevel function for dm365 soc
      arm926ejs, davinci: add cpuinfo for dm365
      arm926ejs, davinci: add missing spi defines for dm365
      arm, davinci: add cam_enc_4xx support

Ilya Yanok (2):
      davinci_emac: compilation fix, phy is array now
      omap/spl: actually enable the console

Sanjeev Premi (7):
      omap3evm: Set environment variable 'ethaddr'
      omap3evm: Reorder related config options
      omap3evm: Prepare to split configuration
      omap3evm: move common config options to new file
      omap3evm: Add (quick) configuration for MMC/SD only
      omap3evm: Add (quick) configuration for NAND only
      omap3evm: fix errors caused by multiple definitions

Stefano Babic (8):
      Davinci: ea20: Add NAND support
      Davinci: ea20: Add early init to get early output from console
      Davinci: ea20: Add default U-Boot environment
      ARM: Davinci: added missing registers to hardware.h
      VIDEO: davinci: add framebuffer to da8xx
      Davinci: ea20: added video support
      Davinci: ea20: added I2C support
      Davinci: ea20: added PREBOOT to configuration

 MAINTAINERS                                        |    1 +
 Makefile                                           |    8 +-
 README                                             |    5 +
 arch/arm/cpu/arm926ejs/davinci/Makefile            |    5 +
 arch/arm/cpu/arm926ejs/davinci/cpu.c               |   27 +-
 arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c    |  439 ++++++++++
 arch/arm/cpu/arm926ejs/davinci/psc.c               |   20 +-
 arch/arm/cpu/arm926ejs/davinci/spl.c               |   63 ++
 arch/arm/cpu/arm926ejs/start.S                     |   31 +-
 arch/arm/cpu/armv7/omap-common/spl.c               |    2 +
 arch/arm/include/asm/arch-davinci/aintc_defs.h     |   50 ++
 arch/arm/include/asm/arch-davinci/da8xx-fb.h       |  126 +++
 arch/arm/include/asm/arch-davinci/dm365_lowlevel.h |   41 +
 arch/arm/include/asm/arch-davinci/hardware.h       |   27 +-
 arch/arm/include/asm/arch-davinci/pll_defs.h       |   84 ++
 arch/arm/include/asm/arch-davinci/psc_defs.h       |   86 ++
 arch/arm/include/asm/arch-davinci/syscfg_defs.h    |   66 ++
 board/ait/cam_enc_4xx/Makefile                     |   46 ++
 board/ait/cam_enc_4xx/cam_enc_4xx.c                |  446 +++++++++++
 board/ait/cam_enc_4xx/config.mk                    |   15 +
 board/ait/cam_enc_4xx/u-boot-spl.lds               |   73 ++
 board/ait/cam_enc_4xx/ublimage.cfg                 |   48 ++
 board/davinci/common/misc.c                        |    2 +-
 board/davinci/ea20/ea20.c                          |  205 ++++-
 board/ti/evm/evm.c                                 |   15 +
 boards.cfg                                         |    3 +
 doc/README.SPL                                     |    2 +
 doc/README.davinci.nand_spl                        |  141 ++++
 drivers/mtd/nand/Makefile                          |    3 +
 drivers/mtd/nand/nand_spl_load.c                   |   56 ++
 drivers/mtd/nand/nand_spl_simple.c                 |   43 +-
 drivers/net/davinci_emac.c                         |   11 +-
 drivers/usb/musb/davinci.c                         |   20 +-
 drivers/video/Makefile                             |    1 +
 drivers/video/da8xx-fb.c                           |  846 ++++++++++++++++++++
 include/configs/cam_enc_4xx.h                      |  453 +++++++++++
 include/configs/ea20.h                             |  126 +++-
 include/configs/omap3_evm.h                        |  331 ++-------
 include/configs/omap3_evm_common.h                 |  292 +++++++
 include/configs/omap3_evm_quick_mmc.h              |   91 +++
 include/configs/omap3_evm_quick_nand.h             |   79 ++
 spl/Makefile                                       |    1 +
 tools/ublimage.h                                   |    2 +-
 43 files changed, 4098 insertions(+), 334 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
 create mode 100644 arch/arm/cpu/arm926ejs/davinci/spl.c
 create mode 100644 arch/arm/include/asm/arch-davinci/aintc_defs.h
 create mode 100644 arch/arm/include/asm/arch-davinci/da8xx-fb.h
 create mode 100644 arch/arm/include/asm/arch-davinci/dm365_lowlevel.h
 create mode 100644 arch/arm/include/asm/arch-davinci/pll_defs.h
 create mode 100644 arch/arm/include/asm/arch-davinci/psc_defs.h
 create mode 100644 arch/arm/include/asm/arch-davinci/syscfg_defs.h
 create mode 100644 board/ait/cam_enc_4xx/Makefile
 create mode 100644 board/ait/cam_enc_4xx/cam_enc_4xx.c
 create mode 100644 board/ait/cam_enc_4xx/config.mk
 create mode 100644 board/ait/cam_enc_4xx/u-boot-spl.lds
 create mode 100644 board/ait/cam_enc_4xx/ublimage.cfg
 create mode 100644 doc/README.davinci.nand_spl
 create mode 100644 drivers/mtd/nand/nand_spl_load.c
 create mode 100644 drivers/video/da8xx-fb.c
 create mode 100644 include/configs/cam_enc_4xx.h
 create mode 100644 include/configs/omap3_evm_common.h
 create mode 100644 include/configs/omap3_evm_quick_mmc.h
 create mode 100644 include/configs/omap3_evm_quick_nand.h
Luca Ceresoli - Nov. 3, 2011, 5:24 p.m.
s-paulraj@ti.com wrote:
> Albert,
> 	Please pull u-boot-ti/master
>
> Regards,
> Sandeep
>
>
> The following changes since commit ce5207e191c59b3135303fd03b98dd2ac3701ba2:
>    Kyle Moffett (1):
>          e1000: Allow direct access to the E1000 SPI EEPROM device
>
> are available in the git repository at:
>
>    git://git.denx.de/u-boot-ti.git master
>

Hi Sandeep,
yesterday I sent two patches to make the dig297 board compile again
after the mach-types sync. Did you receive them?

http://lists.denx.de/pipermail/u-boot/2011-November/108000.html
http://lists.denx.de/pipermail/u-boot/2011-November/108001.html

Thanks,
Luca
Sandeep Paulraj - Nov. 3, 2011, 5:52 p.m.
> Subject: Re: [U-Boot] Please pull u-boot-ti/master
> 
> s-paulraj@ti.com wrote:
> > Albert,
> > 	Please pull u-boot-ti/master
> >
> > Regards,
> > Sandeep
> >
> >
> > The following changes since commit
> ce5207e191c59b3135303fd03b98dd2ac3701ba2:
> >    Kyle Moffett (1):
> >          e1000: Allow direct access to the E1000 SPI EEPROM device
> >
> > are available in the git repository at:
> >
> >    git://git.denx.de/u-boot-ti.git master
> >
> 
> Hi Sandeep,
> yesterday I sent two patches to make the dig297 board compile again
> after the mach-types sync. Did you receive them?
> 
> http://lists.denx.de/pipermail/u-boot/2011-November/108000.html
> http://lists.denx.de/pipermail/u-boot/2011-November/108001.html

Hi Luca,

Pushed to u-boot-ti master

Hi Albert,

Can you please pick up these 2 as well from my master.

Regards,
Sandeep
Wolfgang Denk - Nov. 3, 2011, 6:05 p.m.
Dear Sandeep,

In message <BE04C0A3BEC7354A8BCE3DB869F4D4930A0A36@DLEE08.ent.ti.com> you wrote:
> 
> Pushed to u-boot-ti master
> 
> Hi Albert,
> 
> Can you please pick up these 2 as well from my master.

Umm, no.  Can you please send a formal pull request?

Also, what about all the other TI related patches that have been
queued for a long time?

Is there hope you will find time to resume processing this backlog?

Best regards,

Wolfgang Denk
Albert ARIBAUD - Nov. 3, 2011, 6:17 p.m.
Hi Sandeep,

Le 03/11/2011 18:52, Paulraj, Sandeep a écrit :
>
>
>> Subject: Re: [U-Boot] Please pull u-boot-ti/master
>>
>> s-paulraj@ti.com wrote:
>>> Albert,
>>> 	Please pull u-boot-ti/master
>>>
>>> Regards,
>>> Sandeep
>>>
>>>
>>> The following changes since commit
>> ce5207e191c59b3135303fd03b98dd2ac3701ba2:
>>>     Kyle Moffett (1):
>>>           e1000: Allow direct access to the E1000 SPI EEPROM device
>>>
>>> are available in the git repository at:
>>>
>>>     git://git.denx.de/u-boot-ti.git master
>>>
>>
>> Hi Sandeep,
>> yesterday I sent two patches to make the dig297 board compile again
>> after the mach-types sync. Did you receive them?
>>
>> http://lists.denx.de/pipermail/u-boot/2011-November/108000.html
>> http://lists.denx.de/pipermail/u-boot/2011-November/108001.html
>
> Hi Luca,
>
> Pushed to u-boot-ti master
>
> Hi Albert,
>
> Can you please pick up these 2 as well from my master.

Branch u-boot-ti/master is based on u-boot/master whereas it should be 
based on u-boot-arm/master. Please rebase and as Wolfgang asks, submit a 
formal pull req based on u-boot-arm/master. Currently, that would be 
commit 6d66073614539d94dabff1f63ebd962840c44b81 ("arm/km: portl2 
environment address update to P1B").

> Regards,
> Sandeep

Amicalement,
Tom Rini - Nov. 3, 2011, 6:23 p.m.
On Thu, Nov 3, 2011 at 11:17 AM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hi Sandeep,
>
> Le 03/11/2011 18:52, Paulraj, Sandeep a écrit :
>>
>>
>>> Subject: Re: [U-Boot] Please pull u-boot-ti/master
>>>
>>> s-paulraj@ti.com wrote:
>>>> Albert,
>>>>     Please pull u-boot-ti/master
>>>>
>>>> Regards,
>>>> Sandeep
>>>>
>>>>
>>>> The following changes since commit
>>> ce5207e191c59b3135303fd03b98dd2ac3701ba2:
>>>>     Kyle Moffett (1):
>>>>           e1000: Allow direct access to the E1000 SPI EEPROM device
>>>>
>>>> are available in the git repository at:
>>>>
>>>>     git://git.denx.de/u-boot-ti.git master
>>>>
>>>
>>> Hi Sandeep,
>>> yesterday I sent two patches to make the dig297 board compile again
>>> after the mach-types sync. Did you receive them?
>>>
>>> http://lists.denx.de/pipermail/u-boot/2011-November/108000.html
>>> http://lists.denx.de/pipermail/u-boot/2011-November/108001.html
>>
>> Hi Luca,
>>
>> Pushed to u-boot-ti master
>>
>> Hi Albert,
>>
>> Can you please pick up these 2 as well from my master.
>
> Branch u-boot-ti/master is based on u-boot/master whereas it should be
> based on u-boot-arm/master. Please rebase and as Wolfgang asks, submit a
> formal pull req based on u-boot-arm/master. Currently, that would be
> commit 6d66073614539d94dabff1f63ebd962840c44b81 ("arm/km: portl2
> environment address update to P1B").

Sorry, my fault there.  It looks like it'll be a real easy rebase at least.
Tom Rini - Nov. 3, 2011, 6:26 p.m.
On Thu, Nov 3, 2011 at 10:24 AM, Luca Ceresoli <luca.ceresoli@comelit.it> wrote:
> s-paulraj@ti.com wrote:
>> Albert,
>>       Please pull u-boot-ti/master
>>
>> Regards,
>> Sandeep
>>
>>
>> The following changes since commit ce5207e191c59b3135303fd03b98dd2ac3701ba2:
>>    Kyle Moffett (1):
>>          e1000: Allow direct access to the E1000 SPI EEPROM device
>>
>> are available in the git repository at:
>>
>>    git://git.denx.de/u-boot-ti.git master
>>
>
> Hi Sandeep,
> yesterday I sent two patches to make the dig297 board compile again
> after the mach-types sync. Did you receive them?
>
> http://lists.denx.de/pipermail/u-boot/2011-November/108000.html
> http://lists.denx.de/pipermail/u-boot/2011-November/108001.html

Sorry, for some reason I had thought Albert was collecting all of the
MACH_TYPE fixups that had gone past.
Albert ARIBAUD - Nov. 3, 2011, 7:46 p.m.
Le 03/11/2011 19:26, Tom Rini a écrit :
> On Thu, Nov 3, 2011 at 10:24 AM, Luca Ceresoli<luca.ceresoli@comelit.it>  wrote:
>> s-paulraj@ti.com wrote:
>>> Albert,
>>>        Please pull u-boot-ti/master
>>>
>>> Regards,
>>> Sandeep
>>>
>>>
>>> The following changes since commit ce5207e191c59b3135303fd03b98dd2ac3701ba2:
>>>     Kyle Moffett (1):
>>>           e1000: Allow direct access to the E1000 SPI EEPROM device
>>>
>>> are available in the git repository at:
>>>
>>>     git://git.denx.de/u-boot-ti.git master
>>>
>>
>> Hi Sandeep,
>> yesterday I sent two patches to make the dig297 board compile again
>> after the mach-types sync. Did you receive them?
>>
>> http://lists.denx.de/pipermail/u-boot/2011-November/108000.html
>> http://lists.denx.de/pipermail/u-boot/2011-November/108001.html
>
> Sorry, for some reason I had thought Albert was collecting all of the
> MACH_TYPE fixups that had gone past.

I am, or will, but if you have picked some up already then I'll just 
apply these via your pull request and get on with the rest.

Amicalement,
Tom Rini - Nov. 3, 2011, 8:04 p.m.
On Thu, Nov 3, 2011 at 10:24 AM, Luca Ceresoli <luca.ceresoli@comelit.it> wrote:
> s-paulraj@ti.com wrote:
>> Albert,
>>       Please pull u-boot-ti/master
>>
>> Regards,
>> Sandeep
>>
>>
>> The following changes since commit ce5207e191c59b3135303fd03b98dd2ac3701ba2:
>>    Kyle Moffett (1):
>>          e1000: Allow direct access to the E1000 SPI EEPROM device
>>
>> are available in the git repository at:
>>
>>    git://git.denx.de/u-boot-ti.git master
>>
>
> Hi Sandeep,
> yesterday I sent two patches to make the dig297 board compile again
> after the mach-types sync. Did you receive them?
>
> http://lists.denx.de/pipermail/u-boot/2011-November/108000.html
> http://lists.denx.de/pipermail/u-boot/2011-November/108001.html

Can you condense these into a single patch please?  Thanks.
Sandeep Paulraj - Nov. 3, 2011, 8:13 p.m.
> 
> Branch u-boot-ti/master is based on u-boot/master whereas it should be
> based on u-boot-arm/master. Please rebase and as Wolfgang asks, submit a
> formal pull req based on u-boot-arm/master. Currently, that would be
> commit 6d66073614539d94dabff1f63ebd962840c44b81 ("arm/km: portl2
> environment address update to P1B").
> 

Did just that!
Can you please pull

Regards,
Sandeep
Albert ARIBAUD - Nov. 3, 2011, 9:06 p.m.
Hi Sandeep,

Le 03/11/2011 21:13, Paulraj, Sandeep a écrit :
>
>
>>
>> Branch u-boot-ti/master is based on u-boot/master whereas it should be
>> based on u-boot-arm/master. Please rebase and as Wolfgang asks, submit a
>> formal pull req based on u-boot-arm/master. Currently, that would be
>> commit 6d66073614539d94dabff1f63ebd962840c44b81 ("arm/km: portl2
>> environment address update to P1B").
>>
>
> Did just that!
> Can you please pull

I will gladly do, as soon as you send out a formal pull request.

> Regards,
> Sandeep


Amicalement,
Sandeep Paulraj - Nov. 3, 2011, 9:11 p.m.
> 
> I will gladly do, as soon as you send out a formal pull request.
> 

The mail server seems to be suffering from some delays

--Sandeep
Albert ARIBAUD - Nov. 3, 2011, 9:15 p.m.
Le 03/11/2011 22:11, Paulraj, Sandeep a écrit :
>
>>
>> I will gladly do, as soon as you send out a formal pull request.
>>
>
> The mail server seems to be suffering from some delays

Got it, and apologies.

> --Sandeep

Amicalement,