@@ -1,6 +1,6 @@
-====================
-I2C Device Interface
-====================
+============================================
+Implementing I2C device drivers in userspace
+============================================
Usually, I2C devices are controlled by a kernel driver. But it is also
possible to access all devices on an adapter from userspace, through
@@ -1,6 +1,6 @@
-============
-I2C Protocol
-============
+================
+The I2C Protocol
+================
This document describes the I2C protocol. Or will, when it is finished :-)
@@ -1,6 +1,6 @@
-============
-I2C topology
-============
+================================
+I2C muxes and complex topologies
+================================
There are a couple of reasons for building more complex I2C topologies
than a straight-forward I2C bus with one adapter and one or more devices.
@@ -1,6 +1,6 @@
-=================================================
-I2C device driver binding control from user-space
-=================================================
+================================================================
+I2C device driver binding control from user-space in old kernels
+================================================================
.. NOTE::
Note: this section is only relevant if you are handling some old code
@@ -1,6 +1,6 @@
-======================
-SMBus Protocol Summary
-======================
+==================
+The SMBus Protocol
+==================
The following is a summary of the SMBus protocol. It applies to
all revisions of the protocol (1.0, 1.1, and 2.0).
@@ -1,6 +1,6 @@
-=============
-I2C and SMBus
-=============
+=============================
+Introduction to I2C and SMBus
+=============================
I²C (pronounce: I squared C and written I2C in the kernel documentation) is
a protocol developed by Philips. It is a slow two-wire protocol (variable
@@ -1,6 +1,6 @@
-===================
-Writing I2C Clients
-===================
+===============================
+Implementing I2C device drivers
+===============================
This is a small guide for those who want to write kernel drivers for I2C
or SMBus devices, using Linux as the protocol host/master (not slave).