[v2,2/4] Add the NetBSD Virtual Machine Monitor accelerator.

diff --git a/configure b/configure
index 0ce2c0354a..eb456a271e 100755
--- a/configure
+++ b/configure
@@ -241,6 +241,17 @@  supported_whpx_target() {
     return 1
 }

+supported_nvmm_target() {
+    test "$nvmm" = "yes" || return 1
+    glob "$1" "*-softmmu" || return 1
+    case "${1%-softmmu}" in
+        i386|x86_64)
+            return 0
+        ;;
+    esac
+    return 1
+}
+
 supported_target() {
     case "$1" in
         *-softmmu)
@@ -268,6 +279,7 @@  supported_target() {
     supported_hax_target "$1" && return 0
     supported_hvf_target "$1" && return 0
     supported_whpx_target "$1" && return 0
+    supported_nvmm_target "$1" && return 0
     print_error "TCG disabled, but hardware accelerator not available for '$target'"
     return 1
 }
@@ -387,6 +399,7 @@  kvm="no"
 hax="no"
 hvf="no"
 whpx="no"
+nvmm="no"
 rdma=""
 pvrdma=""
 gprof="no"
@@ -1168,6 +1181,10 @@  for opt do
   ;;
   --enable-whpx) whpx="yes"
   ;;
+  --disable-nvmm) nvmm="no"
+  ;;
+  --enable-nvmm) nvmm="yes"
+  ;;
   --disable-tcg-interpreter) tcg_interpreter="no"
   ;;
   --enable-tcg-interpreter) tcg_interpreter="yes"
@@ -1768,6 +1785,7 @@  disabled with --disable-FEATURE, default is enabled if available:
   hax             HAX acceleration support
   hvf             Hypervisor.framework acceleration support
   whpx            Windows Hypervisor Platform acceleration support
+  nvmm            NetBSD Virtual Machine Monitor acceleration support
   rdma            Enable RDMA-based migration
   pvrdma          Enable PVRDMA support
   vde             support for vde network
@@ -2757,6 +2775,20 @@  if test "$whpx" != "no" ; then
     fi
 fi

+##########################################
+# NetBSD Virtual Machine Monitor (NVMM) accelerator check
+if test "$nvmm" != "no" ; then
+    if check_include "nvmm.h" ; then
+        nvmm="yes"
+	LIBS="-lnvmm $LIBS"
+    else
+        if test "$nvmm" = "yes"; then
+            feature_not_found "NVMM" "NVMM is not available"
+        fi
+        nvmm="no"
+    fi
+fi
+
 ##########################################
 # Sparse probe
 if test "$sparse" != "no" ; then
@@ -6495,6 +6527,7 @@  echo "KVM support       $kvm"
 echo "HAX support       $hax"
 echo "HVF support       $hvf"
 echo "WHPX support      $whpx"
+echo "NVMM support      $nvmm"
 echo "TCG support       $tcg"
 if test "$tcg" = "yes" ; then
     echo "TCG debug enabled $debug_tcg"
@@ -7771,6 +7804,9 @@  fi
 if test "$target_aligned_only" = "yes" ; then
   echo "TARGET_ALIGNED_ONLY=y" >> $config_target_mak
 fi
+if supported_nvmm_target $target; then
+    echo "CONFIG_NVMM=y" >> $config_target_mak
+fi
 if test "$target_bigendian" = "yes" ; then
   echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
 fi
diff --git a/qemu-options.hx b/qemu-options.hx
index e9d6231438..4ddf7c91a0 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -31,7 +31,7 @@  DEF("machine", HAS_ARG, QEMU_OPTION_machine, \
     "-machine [type=]name[,prop[=value][,...]]\n"
     "                selects emulated machine ('-machine help' for list)\n"
     "                property accel=accel1[:accel2[:...]] selects accelerator\n"
-    "                supported accelerators are kvm, xen, hax, hvf, whpx or tcg (default: tcg)\n"
+    "                supported accelerators are kvm, xen, hax, hvf, nvmm, whpx or tcg (default: tcg)\n"
     "                vmport=on|off|auto controls emulation of vmport (default: auto)\n"
     "                dump-guest-core=on|off include guest memory in a core dump (default=on)\n"
     "                mem-merge=on|off controls memory merge support (default: on)\n"
@@ -63,9 +63,9 @@  Supported machine properties are:
 @table @option
 @item accel=@var{accels1}[:@var{accels2}[:...]]
 This is used to enable an accelerator. Depending on the target architecture,
-kvm, xen, hax, hvf, whpx or tcg can be available. By default, tcg is used. If there is
-more than one accelerator specified, the next one is used if the previous one
-fails to initialize.
+kvm, xen, hax, hvf, nvmm, whpx or tcg can be available. By default, tcg is used.
+If there is more than one accelerator specified, the next one is used if the
+previous one fails to initialize.
 @item vmport=on|off|auto
 Enables emulation of VMWare IO port, for vmmouse etc. auto says to select the
 value based on accel. For accel=xen the default is off otherwise the default
@@ -110,7 +110,7 @@  ETEXI

 DEF("accel", HAS_ARG, QEMU_OPTION_accel,
     "-accel [accel=]accelerator[,prop[=value][,...]]\n"
-    "                select accelerator (kvm, xen, hax, hvf, whpx or tcg; use 'help' for a list)\n"
+    "                select accelerator (kvm, xen, hax, hvf, nvmm, whpx or tcg; use 'help' for a list)\n"
     "                igd-passthru=on|off (enable Xen integrated Intel graphics passthrough, default=off)\n"
     "                kernel-irqchip=on|off|split controls accelerated irqchip support (default=on)\n"
     "                kvm-shadow-mem=size of KVM shadow MMU in bytes\n"
@@ -120,9 +120,9 @@  STEXI
 @item -accel @var{name}[,prop=@var{value}[,...]]
 @findex -accel
 This is used to enable an accelerator. Depending on the target architecture,
-kvm, xen, hax, hvf, whpx or tcg can be available. By default, tcg is used. If there is
-more than one accelerator specified, the next one is used if the previous one
-fails to initialize.
+kvm, xen, hax, hvf, nvmm, whpx or tcg can be available. By default, tcg is used.
+If there is more than one accelerator specified, the next one is used if the
+previous one fails to initialize.
 @table @option
 @item igd-passthru=on|off
 When Xen is in use, this option controls whether Intel integrated graphics