diff mbox series

[net,4/9] net/mlx5: E-Switch, Prevent ingress rate configuration of uplink rep

Message ID 20200124202033.13421-5-saeedm@mellanox.com
State Accepted
Delegated to: David Miller
Headers show
Series [net,1/9] net/mlx5: Fix lowest FDB pool size | expand

Commit Message

Saeed Mahameed Jan. 24, 2020, 8:20 p.m. UTC 
From: Eli Cohen <eli@mellanox.com>

Since the implementation relies on limiting the VF transmit rate to
simulate ingress rate limiting, and since either uplink representor or
ecpf are not associated with a VF, we limit the rate limit configuration
for those ports.

Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 024e1cddfd0e..7e32b9e3667c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -4036,6 +4036,13 @@  static int apply_police_params(struct mlx5e_priv *priv, u32 rate,
 	u32 rate_mbps;
 	int err;
 
+	vport_num = rpriv->rep->vport;
+	if (vport_num >= MLX5_VPORT_ECPF) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Ingress rate limit is supported only for Eswitch ports connected to VFs");
+		return -EOPNOTSUPP;
+	}
+
 	esw = priv->mdev->priv.eswitch;
 	/* rate is given in bytes/sec.
 	 * First convert to bits/sec and then round to the nearest mbit/secs.
@@ -4044,8 +4051,6 @@  static int apply_police_params(struct mlx5e_priv *priv, u32 rate,
 	 * 1 mbit/sec.
 	 */
 	rate_mbps = rate ? max_t(u32, (rate * 8 + 500000) / 1000000, 1) : 0;
-	vport_num = rpriv->rep->vport;
-
 	err = mlx5_esw_modify_vport_rate(esw, vport_num, rate_mbps);
 	if (err)
 		NL_SET_ERR_MSG_MOD(extack, "failed applying action to hardware");