| Message ID | 1579795970-22319-6-git-send-email-alain.volmat@st.com |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | i2c: i2c-stm32f7: enhance FastModePlus support | expand |
Ok pour la serie -----Original Message----- From: Alain VOLMAT <alain.volmat@st.com> Sent: jeudi 23 janvier 2020 17:13 To: wsa@the-dreams.de; robh+dt@kernel.org Cc: mark.rutland@arm.com; Pierre Yves MORDRET <pierre-yves.mordret@st.com>; mcoquelin.stm32@gmail.com; Alexandre TORGUE <alexandre.torgue@st.com>; linux-i2c@vger.kernel.org; devicetree@vger.kernel.org; linux-stm32@st-md-mailman.stormreply.com; linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Fabrice GASNIER <fabrice.gasnier@st.com>; Alain VOLMAT <alain.volmat@st.com> Subject: [PATCH 5/5] ARM: dts: stm32: add Fast Mode Plus info in I2C nodes of stm32mp151 Add the syscfg-fmp property in each i2c node in order to allow Fast Mode Plus speed if clock-frequency >= 1MHz is indicated. Signed-off-by: Alain Volmat <alain.volmat@st.com> --- arch/arm/boot/dts/stm32mp151.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 2dbf32ca9b36..ecd0a932aa78 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -483,6 +483,7 @@ resets = <&rcc I2C1_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x1>; wakeup-source; status = "disabled"; }; @@ -497,6 +498,7 @@ resets = <&rcc I2C2_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; wakeup-source; status = "disabled"; }; @@ -511,6 +513,7 @@ resets = <&rcc I2C3_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x4>; wakeup-source; status = "disabled"; }; @@ -525,6 +528,7 @@ resets = <&rcc I2C5_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x10>; wakeup-source; status = "disabled"; }; @@ -1477,6 +1481,7 @@ resets = <&rcc I2C4_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x8>; wakeup-source; status = "disabled"; }; @@ -1513,6 +1518,7 @@ resets = <&rcc I2C6_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x20>; wakeup-source; status = "disabled"; }; -- 2.7.4
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 2dbf32ca9b36..ecd0a932aa78 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -483,6 +483,7 @@ resets = <&rcc I2C1_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x1>; wakeup-source; status = "disabled"; }; @@ -497,6 +498,7 @@ resets = <&rcc I2C2_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; wakeup-source; status = "disabled"; }; @@ -511,6 +513,7 @@ resets = <&rcc I2C3_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x4>; wakeup-source; status = "disabled"; }; @@ -525,6 +528,7 @@ resets = <&rcc I2C5_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x10>; wakeup-source; status = "disabled"; }; @@ -1477,6 +1481,7 @@ resets = <&rcc I2C4_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x8>; wakeup-source; status = "disabled"; }; @@ -1513,6 +1518,7 @@ resets = <&rcc I2C6_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x20>; wakeup-source; status = "disabled"; };
Add the syscfg-fmp property in each i2c node in order to allow Fast Mode Plus speed if clock-frequency >= 1MHz is indicated. Signed-off-by: Alain Volmat <alain.volmat@st.com> --- arch/arm/boot/dts/stm32mp151.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)