diff mbox series

[v2,12/28] docs: i2c: smbus-protocol: properly name start and stop conditions

Message ID 20200123135103.20540-13-luca@lucaceresoli.net
State Superseded
Headers show
Series docs: i2c: rework I2C documentation, part I | expand

Commit Message

Luca Ceresoli Jan. 23, 2020, 1:50 p.m. UTC 
In I2C there is no such thing as a "start bit" or a "stop bit". Use the
proper naming: "start condition" and "stop condition".

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
---
 Documentation/i2c/smbus-protocol.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index 1600b09ec0be..8510eeda1dd0 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -35,8 +35,8 @@  Key to symbols
 ==============
 
 =============== =============================================================
-S     (1 bit) : Start bit
-P     (1 bit) : Stop bit
+S             : Start condition
+P             : Stop condition
 Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
 A, NA (1 bit) : Accept and reverse accept bit.
 Addr  (7 bits): I2C 7 bit address. Note that this can be expanded as usual to