diff mbox series

[v3] net/mlx5e: Don't allow forwarding between uplink

Message ID 1579691703-56363-1-git-send-email-xiangxia.m.yue@gmail.com
State Changes Requested
Delegated to: David Miller
Headers show
Series [v3] net/mlx5e: Don't allow forwarding between uplink | expand

Commit Message

Tonghao Zhang Jan. 22, 2020, 11:15 a.m. UTC
From: Tonghao Zhang <xiangxia.m.yue@gmail.com>

We can install forwarding packets rule between uplink
in switchdev mode, as show below. But the hardware does
not do that as expected (mlnx_perf -i $PF1, we can't get
the counter of the PF1). By the way, if we add the uplink
PF0, PF1 to Open vSwitch and enable hw-offload, the rules
can be offloaded but not work fine too. This patch add a
check and if so return -EOPNOTSUPP.

$ tc filter add dev $PF0 protocol all parent ffff: prio 1 handle 1 \
    flower skip_sw action mirred egress redirect dev $PF1

$ tc -d -s filter show dev $PF0 ingress
    skip_sw
    in_hw in_hw_count 1
    action order 1: mirred (Egress Redirect to device enp130s0f1) stolen
    ...
    Sent hardware 408954 bytes 4173 pkt
    ...

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c |  5 +++++
 drivers/net/ethernet/mellanox/mlx5/core/en_rep.h |  1 +
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c  | 19 +++++++++++++++++++
 3 files changed, 25 insertions(+)

Comments

Jiri Pirko Jan. 22, 2020, 1:33 p.m. UTC | #1
Wed, Jan 22, 2020 at 12:15:03PM CET, xiangxia.m.yue@gmail.com wrote:
>From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
>
>We can install forwarding packets rule between uplink
>in switchdev mode, as show below. But the hardware does
>not do that as expected (mlnx_perf -i $PF1, we can't get
>the counter of the PF1). By the way, if we add the uplink
>PF0, PF1 to Open vSwitch and enable hw-offload, the rules
>can be offloaded but not work fine too. This patch add a
>check and if so return -EOPNOTSUPP.
>
>$ tc filter add dev $PF0 protocol all parent ffff: prio 1 handle 1 \
>    flower skip_sw action mirred egress redirect dev $PF1
>
>$ tc -d -s filter show dev $PF0 ingress
>    skip_sw
>    in_hw in_hw_count 1
>    action order 1: mirred (Egress Redirect to device enp130s0f1) stolen
>    ...
>    Sent hardware 408954 bytes 4173 pkt
>    ...
>
>Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
>---
> drivers/net/ethernet/mellanox/mlx5/core/en_rep.c |  5 +++++
> drivers/net/ethernet/mellanox/mlx5/core/en_rep.h |  1 +
> drivers/net/ethernet/mellanox/mlx5/core/en_tc.c  | 19 +++++++++++++++++++
> 3 files changed, 25 insertions(+)
>
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
>index f175cb2..ac2a035 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
>@@ -1434,6 +1434,11 @@ static struct devlink_port *mlx5e_get_devlink_port(struct net_device *dev)
> 	.ndo_set_features        = mlx5e_set_features,
> };
> 
>+bool mlx5e_eswitch_uplink_rep(struct net_device *netdev)
>+{
>+	return netdev->netdev_ops == &mlx5e_netdev_ops_uplink_rep;
>+}
>+
> bool mlx5e_eswitch_rep(struct net_device *netdev)
> {
> 	if (netdev->netdev_ops == &mlx5e_netdev_ops_rep ||
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
>index 31f83c8..5211819 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
>@@ -199,6 +199,7 @@ void mlx5e_rep_encap_entry_detach(struct mlx5e_priv *priv,
> void mlx5e_rep_queue_neigh_stats_work(struct mlx5e_priv *priv);
> 
> bool mlx5e_eswitch_rep(struct net_device *netdev);
>+bool mlx5e_eswitch_uplink_rep(struct net_device *netdev);
> 
> #else /* CONFIG_MLX5_ESWITCH */
> static inline bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv) { return false; }
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
>index db614bd..35f68e4 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
>@@ -3361,6 +3361,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
> 				struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
> 				struct net_device *uplink_dev = mlx5_eswitch_uplink_get_proto_dev(esw, REP_ETH);
> 				struct net_device *uplink_upper;
>+				struct mlx5e_rep_priv *rep_priv;
> 
> 				if (is_duplicated_output_device(priv->netdev,
> 								out_dev,
>@@ -3396,6 +3397,24 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
> 						return err;
> 				}
> 
>+				/* Don't allow forwarding between uplink.
>+				 *
>+				 * Input vport was stored esw_attr->in_rep.
>+				 * In LAG case, *priv* is the private data of
>+				 * uplink which may be not the input vport.
>+				 */
>+				rep_priv = mlx5e_rep_to_rep_priv(attr->in_rep);
>+				if (mlx5e_eswitch_uplink_rep(rep_priv->netdev) &&
>+				    mlx5e_eswitch_uplink_rep(out_dev)) {
>+					NL_SET_ERR_MSG_MOD(extack,
>+							   "devices are both uplink, "

Never break error messages.


>+							   "can't offload forwarding");
>+					pr_err("devices %s %s are both uplink, "

Here as well.


>+					       "can't offload forwarding\n",
>+					       priv->netdev->name, out_dev->name);
>+					return -EOPNOTSUPP;
>+				}
>+
> 				if (!mlx5e_is_valid_eswitch_fwd_dev(priv, out_dev)) {
> 					NL_SET_ERR_MSG_MOD(extack,
> 							   "devices are not on same switch HW, can't offload forwarding");
>-- 
>1.8.3.1
>
Roi Dayan Jan. 29, 2020, 11:42 a.m. UTC | #2
On 2020-01-22 3:33 PM, Jiri Pirko wrote:
> Wed, Jan 22, 2020 at 12:15:03PM CET, xiangxia.m.yue@gmail.com wrote:
>> From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
>>
>> We can install forwarding packets rule between uplink
>> in switchdev mode, as show below. But the hardware does
>> not do that as expected (mlnx_perf -i $PF1, we can't get
>> the counter of the PF1). By the way, if we add the uplink
>> PF0, PF1 to Open vSwitch and enable hw-offload, the rules
>> can be offloaded but not work fine too. This patch add a
>> check and if so return -EOPNOTSUPP.
>>
>> $ tc filter add dev $PF0 protocol all parent ffff: prio 1 handle 1 \
>>    flower skip_sw action mirred egress redirect dev $PF1
>>
>> $ tc -d -s filter show dev $PF0 ingress
>>    skip_sw
>>    in_hw in_hw_count 1
>>    action order 1: mirred (Egress Redirect to device enp130s0f1) stolen
>>    ...
>>    Sent hardware 408954 bytes 4173 pkt
>>    ...
>>
>> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
>> ---
>> drivers/net/ethernet/mellanox/mlx5/core/en_rep.c |  5 +++++
>> drivers/net/ethernet/mellanox/mlx5/core/en_rep.h |  1 +
>> drivers/net/ethernet/mellanox/mlx5/core/en_tc.c  | 19 +++++++++++++++++++
>> 3 files changed, 25 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
>> index f175cb2..ac2a035 100644
>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
>> @@ -1434,6 +1434,11 @@ static struct devlink_port *mlx5e_get_devlink_port(struct net_device *dev)
>> 	.ndo_set_features        = mlx5e_set_features,
>> };
>>
>> +bool mlx5e_eswitch_uplink_rep(struct net_device *netdev)
>> +{
>> +	return netdev->netdev_ops == &mlx5e_netdev_ops_uplink_rep;
>> +}
>> +
>> bool mlx5e_eswitch_rep(struct net_device *netdev)
>> {
>> 	if (netdev->netdev_ops == &mlx5e_netdev_ops_rep ||
>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
>> index 31f83c8..5211819 100644
>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
>> @@ -199,6 +199,7 @@ void mlx5e_rep_encap_entry_detach(struct mlx5e_priv *priv,
>> void mlx5e_rep_queue_neigh_stats_work(struct mlx5e_priv *priv);
>>
>> bool mlx5e_eswitch_rep(struct net_device *netdev);
>> +bool mlx5e_eswitch_uplink_rep(struct net_device *netdev);
>>
>> #else /* CONFIG_MLX5_ESWITCH */
>> static inline bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv) { return false; }
>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
>> index db614bd..35f68e4 100644
>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
>> @@ -3361,6 +3361,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
>> 				struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
>> 				struct net_device *uplink_dev = mlx5_eswitch_uplink_get_proto_dev(esw, REP_ETH);
>> 				struct net_device *uplink_upper;
>> +				struct mlx5e_rep_priv *rep_priv;
>>
>> 				if (is_duplicated_output_device(priv->netdev,
>> 								out_dev,
>> @@ -3396,6 +3397,24 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
>> 						return err;
>> 				}
>>
>> +				/* Don't allow forwarding between uplink.
>> +				 *
>> +				 * Input vport was stored esw_attr->in_rep.
>> +				 * In LAG case, *priv* is the private data of
>> +				 * uplink which may be not the input vport.
>> +				 */
>> +				rep_priv = mlx5e_rep_to_rep_priv(attr->in_rep);
>> +				if (mlx5e_eswitch_uplink_rep(rep_priv->netdev) &&
>> +				    mlx5e_eswitch_uplink_rep(out_dev)) {
>> +					NL_SET_ERR_MSG_MOD(extack,
>> +							   "devices are both uplink, "
> 
> Never break error messages.
> 
> 
>> +							   "can't offload forwarding");
>> +					pr_err("devices %s %s are both uplink, "
> 
> Here as well.
> 
> 
>> +					       "can't offload forwarding\n",
>> +					       priv->netdev->name, out_dev->name);
>> +					return -EOPNOTSUPP;
>> +				}
>> +
>> 				if (!mlx5e_is_valid_eswitch_fwd_dev(priv, out_dev)) {
>> 					NL_SET_ERR_MSG_MOD(extack,
>> 							   "devices are not on same switch HW, can't offload forwarding");
>> -- 
>> 1.8.3.1
>>

beside what Jiri commented, the rest looks fine to me.
Roi Dayan Feb. 10, 2020, 8:15 a.m. UTC | #3
On 2020-01-29 1:42 PM, Roi Dayan wrote:
> 
> 
> On 2020-01-22 3:33 PM, Jiri Pirko wrote:
>> Wed, Jan 22, 2020 at 12:15:03PM CET, xiangxia.m.yue@gmail.com wrote:
>>> From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
>>>
>>> We can install forwarding packets rule between uplink
>>> in switchdev mode, as show below. But the hardware does
>>> not do that as expected (mlnx_perf -i $PF1, we can't get
>>> the counter of the PF1). By the way, if we add the uplink
>>> PF0, PF1 to Open vSwitch and enable hw-offload, the rules
>>> can be offloaded but not work fine too. This patch add a
>>> check and if so return -EOPNOTSUPP.
>>>
>>> $ tc filter add dev $PF0 protocol all parent ffff: prio 1 handle 1 \
>>>    flower skip_sw action mirred egress redirect dev $PF1
>>>
>>> $ tc -d -s filter show dev $PF0 ingress
>>>    skip_sw
>>>    in_hw in_hw_count 1
>>>    action order 1: mirred (Egress Redirect to device enp130s0f1) stolen
>>>    ...
>>>    Sent hardware 408954 bytes 4173 pkt
>>>    ...
>>>
>>> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
>>> ---
>>> drivers/net/ethernet/mellanox/mlx5/core/en_rep.c |  5 +++++
>>> drivers/net/ethernet/mellanox/mlx5/core/en_rep.h |  1 +
>>> drivers/net/ethernet/mellanox/mlx5/core/en_tc.c  | 19 +++++++++++++++++++
>>> 3 files changed, 25 insertions(+)
>>>
>>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
>>> index f175cb2..ac2a035 100644
>>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
>>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
>>> @@ -1434,6 +1434,11 @@ static struct devlink_port *mlx5e_get_devlink_port(struct net_device *dev)
>>> 	.ndo_set_features        = mlx5e_set_features,
>>> };
>>>
>>> +bool mlx5e_eswitch_uplink_rep(struct net_device *netdev)
>>> +{
>>> +	return netdev->netdev_ops == &mlx5e_netdev_ops_uplink_rep;
>>> +}
>>> +
>>> bool mlx5e_eswitch_rep(struct net_device *netdev)
>>> {
>>> 	if (netdev->netdev_ops == &mlx5e_netdev_ops_rep ||
>>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
>>> index 31f83c8..5211819 100644
>>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
>>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
>>> @@ -199,6 +199,7 @@ void mlx5e_rep_encap_entry_detach(struct mlx5e_priv *priv,
>>> void mlx5e_rep_queue_neigh_stats_work(struct mlx5e_priv *priv);
>>>
>>> bool mlx5e_eswitch_rep(struct net_device *netdev);
>>> +bool mlx5e_eswitch_uplink_rep(struct net_device *netdev);
>>>
>>> #else /* CONFIG_MLX5_ESWITCH */
>>> static inline bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv) { return false; }
>>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
>>> index db614bd..35f68e4 100644
>>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
>>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
>>> @@ -3361,6 +3361,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
>>> 				struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
>>> 				struct net_device *uplink_dev = mlx5_eswitch_uplink_get_proto_dev(esw, REP_ETH);
>>> 				struct net_device *uplink_upper;
>>> +				struct mlx5e_rep_priv *rep_priv;
>>>
>>> 				if (is_duplicated_output_device(priv->netdev,
>>> 								out_dev,
>>> @@ -3396,6 +3397,24 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
>>> 						return err;
>>> 				}
>>>
>>> +				/* Don't allow forwarding between uplink.
>>> +				 *
>>> +				 * Input vport was stored esw_attr->in_rep.
>>> +				 * In LAG case, *priv* is the private data of
>>> +				 * uplink which may be not the input vport.
>>> +				 */
>>> +				rep_priv = mlx5e_rep_to_rep_priv(attr->in_rep);
>>> +				if (mlx5e_eswitch_uplink_rep(rep_priv->netdev) &&
>>> +				    mlx5e_eswitch_uplink_rep(out_dev)) {
>>> +					NL_SET_ERR_MSG_MOD(extack,
>>> +							   "devices are both uplink, "
>>
>> Never break error messages.
>>
>>
>>> +							   "can't offload forwarding");
>>> +					pr_err("devices %s %s are both uplink, "
>>
>> Here as well.
>>
>>
>>> +					       "can't offload forwarding\n",
>>> +					       priv->netdev->name, out_dev->name);
>>> +					return -EOPNOTSUPP;
>>> +				}
>>> +
>>> 				if (!mlx5e_is_valid_eswitch_fwd_dev(priv, out_dev)) {
>>> 					NL_SET_ERR_MSG_MOD(extack,
>>> 							   "devices are not on same switch HW, can't offload forwarding");
>>> -- 
>>> 1.8.3.1
>>>
> 
> beside what Jiri commented, the rest looks fine to me.
> 

Hi Zhang,

Are you going to send v4?

Thanks,
Roi
Tonghao Zhang Feb. 17, 2020, 2:13 p.m. UTC | #4
On Mon, Feb 10, 2020 at 4:15 PM Roi Dayan <roid@mellanox.com> wrote:
>
>
>
> On 2020-01-29 1:42 PM, Roi Dayan wrote:
> >
> >
> > On 2020-01-22 3:33 PM, Jiri Pirko wrote:
> >> Wed, Jan 22, 2020 at 12:15:03PM CET, xiangxia.m.yue@gmail.com wrote:
> >>> From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
> >>>
> >>> We can install forwarding packets rule between uplink
> >>> in switchdev mode, as show below. But the hardware does
> >>> not do that as expected (mlnx_perf -i $PF1, we can't get
> >>> the counter of the PF1). By the way, if we add the uplink
> >>> PF0, PF1 to Open vSwitch and enable hw-offload, the rules
> >>> can be offloaded but not work fine too. This patch add a
> >>> check and if so return -EOPNOTSUPP.
> >>>
> >>> $ tc filter add dev $PF0 protocol all parent ffff: prio 1 handle 1 \
> >>>    flower skip_sw action mirred egress redirect dev $PF1
> >>>
> >>> $ tc -d -s filter show dev $PF0 ingress
> >>>    skip_sw
> >>>    in_hw in_hw_count 1
> >>>    action order 1: mirred (Egress Redirect to device enp130s0f1) stolen
> >>>    ...
> >>>    Sent hardware 408954 bytes 4173 pkt
> >>>    ...
> >>>
> >>> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
> >>> ---
> >>> drivers/net/ethernet/mellanox/mlx5/core/en_rep.c |  5 +++++
> >>> drivers/net/ethernet/mellanox/mlx5/core/en_rep.h |  1 +
> >>> drivers/net/ethernet/mellanox/mlx5/core/en_tc.c  | 19 +++++++++++++++++++
> >>> 3 files changed, 25 insertions(+)
> >>>
> >>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
> >>> index f175cb2..ac2a035 100644
> >>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
> >>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
> >>> @@ -1434,6 +1434,11 @@ static struct devlink_port *mlx5e_get_devlink_port(struct net_device *dev)
> >>>     .ndo_set_features        = mlx5e_set_features,
> >>> };
> >>>
> >>> +bool mlx5e_eswitch_uplink_rep(struct net_device *netdev)
> >>> +{
> >>> +   return netdev->netdev_ops == &mlx5e_netdev_ops_uplink_rep;
> >>> +}
> >>> +
> >>> bool mlx5e_eswitch_rep(struct net_device *netdev)
> >>> {
> >>>     if (netdev->netdev_ops == &mlx5e_netdev_ops_rep ||
> >>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
> >>> index 31f83c8..5211819 100644
> >>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
> >>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
> >>> @@ -199,6 +199,7 @@ void mlx5e_rep_encap_entry_detach(struct mlx5e_priv *priv,
> >>> void mlx5e_rep_queue_neigh_stats_work(struct mlx5e_priv *priv);
> >>>
> >>> bool mlx5e_eswitch_rep(struct net_device *netdev);
> >>> +bool mlx5e_eswitch_uplink_rep(struct net_device *netdev);
> >>>
> >>> #else /* CONFIG_MLX5_ESWITCH */
> >>> static inline bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv) { return false; }
> >>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
> >>> index db614bd..35f68e4 100644
> >>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
> >>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
> >>> @@ -3361,6 +3361,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
> >>>                             struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
> >>>                             struct net_device *uplink_dev = mlx5_eswitch_uplink_get_proto_dev(esw, REP_ETH);
> >>>                             struct net_device *uplink_upper;
> >>> +                           struct mlx5e_rep_priv *rep_priv;
> >>>
> >>>                             if (is_duplicated_output_device(priv->netdev,
> >>>                                                             out_dev,
> >>> @@ -3396,6 +3397,24 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
> >>>                                             return err;
> >>>                             }
> >>>
> >>> +                           /* Don't allow forwarding between uplink.
> >>> +                            *
> >>> +                            * Input vport was stored esw_attr->in_rep.
> >>> +                            * In LAG case, *priv* is the private data of
> >>> +                            * uplink which may be not the input vport.
> >>> +                            */
> >>> +                           rep_priv = mlx5e_rep_to_rep_priv(attr->in_rep);
> >>> +                           if (mlx5e_eswitch_uplink_rep(rep_priv->netdev) &&
> >>> +                               mlx5e_eswitch_uplink_rep(out_dev)) {
> >>> +                                   NL_SET_ERR_MSG_MOD(extack,
> >>> +                                                      "devices are both uplink, "
> >>
> >> Never break error messages.
> >>
> >>
> >>> +                                                      "can't offload forwarding");
> >>> +                                   pr_err("devices %s %s are both uplink, "
> >>
> >> Here as well.
> >>
> >>
> >>> +                                          "can't offload forwarding\n",
> >>> +                                          priv->netdev->name, out_dev->name);
> >>> +                                   return -EOPNOTSUPP;
> >>> +                           }
> >>> +
> >>>                             if (!mlx5e_is_valid_eswitch_fwd_dev(priv, out_dev)) {
> >>>                                     NL_SET_ERR_MSG_MOD(extack,
> >>>                                                        "devices are not on same switch HW, can't offload forwarding");
> >>> --
> >>> 1.8.3.1
> >>>
> >
> > beside what Jiri commented, the rest looks fine to me.
> >
>
> Hi Zhang,
>
> Are you going to send v4?
Hi, I am so sorry, reply too later. Holiday ends.
v4 is sent.
> Thanks,
> Roi
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
index f175cb2..ac2a035 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -1434,6 +1434,11 @@  static struct devlink_port *mlx5e_get_devlink_port(struct net_device *dev)
 	.ndo_set_features        = mlx5e_set_features,
 };
 
+bool mlx5e_eswitch_uplink_rep(struct net_device *netdev)
+{
+	return netdev->netdev_ops == &mlx5e_netdev_ops_uplink_rep;
+}
+
 bool mlx5e_eswitch_rep(struct net_device *netdev)
 {
 	if (netdev->netdev_ops == &mlx5e_netdev_ops_rep ||
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
index 31f83c8..5211819 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h
@@ -199,6 +199,7 @@  void mlx5e_rep_encap_entry_detach(struct mlx5e_priv *priv,
 void mlx5e_rep_queue_neigh_stats_work(struct mlx5e_priv *priv);
 
 bool mlx5e_eswitch_rep(struct net_device *netdev);
+bool mlx5e_eswitch_uplink_rep(struct net_device *netdev);
 
 #else /* CONFIG_MLX5_ESWITCH */
 static inline bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv) { return false; }
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index db614bd..35f68e4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -3361,6 +3361,7 @@  static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
 				struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
 				struct net_device *uplink_dev = mlx5_eswitch_uplink_get_proto_dev(esw, REP_ETH);
 				struct net_device *uplink_upper;
+				struct mlx5e_rep_priv *rep_priv;
 
 				if (is_duplicated_output_device(priv->netdev,
 								out_dev,
@@ -3396,6 +3397,24 @@  static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
 						return err;
 				}
 
+				/* Don't allow forwarding between uplink.
+				 *
+				 * Input vport was stored esw_attr->in_rep.
+				 * In LAG case, *priv* is the private data of
+				 * uplink which may be not the input vport.
+				 */
+				rep_priv = mlx5e_rep_to_rep_priv(attr->in_rep);
+				if (mlx5e_eswitch_uplink_rep(rep_priv->netdev) &&
+				    mlx5e_eswitch_uplink_rep(out_dev)) {
+					NL_SET_ERR_MSG_MOD(extack,
+							   "devices are both uplink, "
+							   "can't offload forwarding");
+					pr_err("devices %s %s are both uplink, "
+					       "can't offload forwarding\n",
+					       priv->netdev->name, out_dev->name);
+					return -EOPNOTSUPP;
+				}
+
 				if (!mlx5e_is_valid_eswitch_fwd_dev(priv, out_dev)) {
 					NL_SET_ERR_MSG_MOD(extack,
 							   "devices are not on same switch HW, can't offload forwarding");