| Message ID | 20200120235159.18510-7-f4bug@amsat.org |
|---|---|
| State | New |
| Headers | show |
| Series | hw/arm/raspi: Run U-Boot on the raspi machines | expand |
On 1/20/20 9:51 PM, Philippe Mathieu-Daudé wrote: > This test runs U-Boot on the Raspberry Pi 3. > It is very simple and fast: > > $ avocado --show=app,console run -t raspi3 -t u-boot tests/acceptance/ > JOB LOG : avocado/job-results/job-2020-01-20T23.40-2424777/job.log > (1/1) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_aarch64_raspi3_uboot: > console: MMC: mmc@7e202000: 0, sdhci@7e300000: 1 > console: Loading Environment from FAT... WARNING at drivers/mmc/bcm2835_sdhost.c:410/bcm2835_send_command()! > console: WARNING at drivers/mmc/bcm2835_sdhost.c:410/bcm2835_send_command()! > console: Card did not respond to voltage select! > console: In: serial > console: Out: vidconsole > console: Err: vidconsole > console: Net: No ethernet found. > console: starting USB... > console: Bus usb@7e980000: Port not available. > console: Hit any key to stop autoboot: 0 > console: U-Boot> > console: U-Boot> > console: U-Boot> bdinfo > console: arch_number = 0x0000000000000000 > console: boot_params = 0x0000000000000100 > console: DRAM bank = 0x0000000000000000 > console: -> start = 0x0000000000000000 > console: -> size = 0x000000003c000000 > console: baudrate = 115200 bps > console: TLB addr = 0x000000003bff0000 > console: relocaddr = 0x000000003bf57000 > console: reloc off = 0x000000003bed7000 > console: irq_sp = 0x000000003bb52dd0 > console: sp start = 0x000000003bb52dd0 > console: FB base = 0x0000000000000000 > console: Early malloc usage: 7b0 / 2000 > console: fdt_blob = 0x000000003bfbf200 > console: U-Boot> version > console: U-Boot 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000) > console: gcc (Debian 9.2.1-22) 9.2.1 20200104 > console: GNU ld (GNU Binutils for Debian) 2.33.1 > console: U-Boot> reset > console: resetting ... > PASS (1.79 s) > > U-Boot is built by the Debian project, see: > https://wiki.debian.org/InstallingDebianOn/Allwinner#Creating_a_bootable_SD_Card_with_u-boot > > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > --- > tests/acceptance/boot_linux_console.py | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> > > diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py > index 682b801b4f..22b360118d 100644 > --- a/tests/acceptance/boot_linux_console.py > +++ b/tests/acceptance/boot_linux_console.py > @@ -513,6 +513,31 @@ class BootLinuxConsole(Test): > exec_command_and_wait_for_pattern(self, 'version', 'U-Boot') > exec_command_and_wait_for_pattern(self, 'reset', 'resetting ...') > > + def test_aarch64_raspi3_uboot(self): > + """ > + :avocado: tags=arch:aarch64 > + :avocado: tags=machine:raspi3 > + :avocado: tags=u-boot > + """ > + deb_url = ('https://snapshot.debian.org/archive/debian/' > + '20200108T145233Z/pool/main/u/u-boot/' > + 'u-boot-rpi_2020.01%2Bdfsg-1_arm64.deb') > + deb_hash = 'f394386e02469d52f2eb3c07a2325b1c95aeb00b' > + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) > + uboot_path = '/usr/lib/u-boot/rpi_3/u-boot.bin' > + uboot_path = self.extract_from_deb(deb_path, uboot_path) > + > + self.vm.set_console(console_index=1) > + self.vm.add_args('-kernel', uboot_path, > + '-no-reboot') > + self.vm.launch() > + interrupt_interactive_console_until_pattern(self, > + 'Hit any key to stop autoboot:', > + 'Config file not found') > + exec_command_and_wait_for_pattern(self, 'bdinfo', 'U-Boot') > + exec_command_and_wait_for_pattern(self, 'version', 'U-Boot') > + exec_command_and_wait_for_pattern(self, 'reset', 'resetting ...') > + > def test_s390x_s390_ccw_virtio(self): > """ > :avocado: tags=arch:s390x
diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index 682b801b4f..22b360118d 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -513,6 +513,31 @@ class BootLinuxConsole(Test): exec_command_and_wait_for_pattern(self, 'version', 'U-Boot') exec_command_and_wait_for_pattern(self, 'reset', 'resetting ...') + def test_aarch64_raspi3_uboot(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:raspi3 + :avocado: tags=u-boot + """ + deb_url = ('https://snapshot.debian.org/archive/debian/' + '20200108T145233Z/pool/main/u/u-boot/' + 'u-boot-rpi_2020.01%2Bdfsg-1_arm64.deb') + deb_hash = 'f394386e02469d52f2eb3c07a2325b1c95aeb00b' + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) + uboot_path = '/usr/lib/u-boot/rpi_3/u-boot.bin' + uboot_path = self.extract_from_deb(deb_path, uboot_path) + + self.vm.set_console(console_index=1) + self.vm.add_args('-kernel', uboot_path, + '-no-reboot') + self.vm.launch() + interrupt_interactive_console_until_pattern(self, + 'Hit any key to stop autoboot:', + 'Config file not found') + exec_command_and_wait_for_pattern(self, 'bdinfo', 'U-Boot') + exec_command_and_wait_for_pattern(self, 'version', 'U-Boot') + exec_command_and_wait_for_pattern(self, 'reset', 'resetting ...') + def test_s390x_s390_ccw_virtio(self): """ :avocado: tags=arch:s390x
This test runs U-Boot on the Raspberry Pi 3. It is very simple and fast: $ avocado --show=app,console run -t raspi3 -t u-boot tests/acceptance/ JOB LOG : avocado/job-results/job-2020-01-20T23.40-2424777/job.log (1/1) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_aarch64_raspi3_uboot: console: MMC: mmc@7e202000: 0, sdhci@7e300000: 1 console: Loading Environment from FAT... WARNING at drivers/mmc/bcm2835_sdhost.c:410/bcm2835_send_command()! console: WARNING at drivers/mmc/bcm2835_sdhost.c:410/bcm2835_send_command()! console: Card did not respond to voltage select! console: In: serial console: Out: vidconsole console: Err: vidconsole console: Net: No ethernet found. console: starting USB... console: Bus usb@7e980000: Port not available. console: Hit any key to stop autoboot: 0 console: U-Boot> console: U-Boot> console: U-Boot> bdinfo console: arch_number = 0x0000000000000000 console: boot_params = 0x0000000000000100 console: DRAM bank = 0x0000000000000000 console: -> start = 0x0000000000000000 console: -> size = 0x000000003c000000 console: baudrate = 115200 bps console: TLB addr = 0x000000003bff0000 console: relocaddr = 0x000000003bf57000 console: reloc off = 0x000000003bed7000 console: irq_sp = 0x000000003bb52dd0 console: sp start = 0x000000003bb52dd0 console: FB base = 0x0000000000000000 console: Early malloc usage: 7b0 / 2000 console: fdt_blob = 0x000000003bfbf200 console: U-Boot> version console: U-Boot 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000) console: gcc (Debian 9.2.1-22) 9.2.1 20200104 console: GNU ld (GNU Binutils for Debian) 2.33.1 console: U-Boot> reset console: resetting ... PASS (1.79 s) U-Boot is built by the Debian project, see: https://wiki.debian.org/InstallingDebianOn/Allwinner#Creating_a_bootable_SD_Card_with_u-boot Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/acceptance/boot_linux_console.py | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)