[v10,08/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts
diff mbox series

Message ID def409ab024717e6cd917c488e62fe04ad66bd52.1579249511.git.matti.vaittinen@fi.rohmeurope.com
State New
Headers show
Series
  • Support ROHM BD71828 PMIC
Related show

Commit Message

Vaittinen, Matti Jan. 17, 2020, 9:38 a.m. UTC
Few ROHM PMICs allow setting the voltage states for different system states
like RUN, IDLE, SUSPEND and LPSR. States are then changed via SoC specific
mechanisms. bd718x7 driver implemented device-tree parsing functions for
these state specific voltages. The parsing functions can be re-used by
other ROHM chip drivers like bd71828. Split the generic functions from
bd718x7-regulator.c to rohm-regulator.c and export them for other modules
to use.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Mark Brown <broonie@kernel.org>
---
no changes since v9

 drivers/regulator/Kconfig             |   4 +
 drivers/regulator/Makefile            |   1 +
 drivers/regulator/bd718x7-regulator.c | 183 ++++++++------------------
 drivers/regulator/rohm-regulator.c    |  95 +++++++++++++
 include/linux/mfd/rohm-generic.h      |  66 ++++++++++
 5 files changed, 221 insertions(+), 128 deletions(-)
 create mode 100644 drivers/regulator/rohm-regulator.c

Comments

Lee Jones Jan. 17, 2020, 10:28 a.m. UTC | #1
On Fri, 17 Jan 2020, Matti Vaittinen wrote:

> Few ROHM PMICs allow setting the voltage states for different system states
> like RUN, IDLE, SUSPEND and LPSR. States are then changed via SoC specific
> mechanisms. bd718x7 driver implemented device-tree parsing functions for
> these state specific voltages. The parsing functions can be re-used by
> other ROHM chip drivers like bd71828. Split the generic functions from
> bd718x7-regulator.c to rohm-regulator.c and export them for other modules
> to use.
> 
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> Acked-by: Mark Brown <broonie@kernel.org>
> ---
> no changes since v9
> 
>  drivers/regulator/Kconfig             |   4 +
>  drivers/regulator/Makefile            |   1 +
>  drivers/regulator/bd718x7-regulator.c | 183 ++++++++------------------
>  drivers/regulator/rohm-regulator.c    |  95 +++++++++++++
>  include/linux/mfd/rohm-generic.h      |  66 ++++++++++
>  5 files changed, 221 insertions(+), 128 deletions(-)
>  create mode 100644 drivers/regulator/rohm-regulator.c

[...]

> diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
> index ff3dd7578fd3..6cc5a0819959 100644
> --- a/include/linux/mfd/rohm-generic.h
> +++ b/include/linux/mfd/rohm-generic.h
> @@ -4,6 +4,9 @@
>  #ifndef __LINUX_MFD_ROHM_H__
>  #define __LINUX_MFD_ROHM_H__
>  
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +
>  enum rohm_chip_type {
>  	ROHM_CHIP_TYPE_BD71837 = 0,
>  	ROHM_CHIP_TYPE_BD71847,
> @@ -17,4 +20,67 @@ struct rohm_regmap_dev {
>  	struct regmap *regmap;
>  };
>  
> +enum {
> +	ROHM_DVS_LEVEL_UNKNOWN,
> +	ROHM_DVS_LEVEL_RUN,
> +	ROHM_DVS_LEVEL_IDLE,
> +	ROHM_DVS_LEVEL_SUSPEND,
> +	ROHM_DVS_LEVEL_LPSR,
> +#define ROHM_DVS_LEVEL_MAX ROHM_DVS_LEVEL_LPSR

Haven't seen this before.  Is it legit?

What about:

     ROHM_DVS_LEVEL_MAX = ROHM_DVS_LEVEL_LPSR
Vaittinen, Matti Jan. 17, 2020, 10:43 a.m. UTC | #2
Hello Lee,

On Fri, 2020-01-17 at 10:28 +0000, Lee Jones wrote:
> On Fri, 17 Jan 2020, Matti Vaittinen wrote:
> 
> > Few ROHM PMICs allow setting the voltage states for different
> > system states
> > like RUN, IDLE, SUSPEND and LPSR. States are then changed via SoC
> > specific
> > mechanisms. bd718x7 driver implemented device-tree parsing
> > functions for
> > these state specific voltages. The parsing functions can be re-used 
> > by
> > other ROHM chip drivers like bd71828. Split the generic functions
> > from
> > bd718x7-regulator.c to rohm-regulator.c and export them for other
> > modules
> > to use.
> > 
> > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > Acked-by: Mark Brown <broonie@kernel.org>
> > ---
> > no changes since v9
> > 
> >  drivers/regulator/Kconfig             |   4 +
> >  drivers/regulator/Makefile            |   1 +
> >  drivers/regulator/bd718x7-regulator.c | 183 ++++++++------------
> > ------
> >  drivers/regulator/rohm-regulator.c    |  95 +++++++++++++
> >  include/linux/mfd/rohm-generic.h      |  66 ++++++++++
> >  5 files changed, 221 insertions(+), 128 deletions(-)
> >  create mode 100644 drivers/regulator/rohm-regulator.c
> 
> [...]
> 
> > diff --git a/include/linux/mfd/rohm-generic.h
> > b/include/linux/mfd/rohm-generic.h
> > index ff3dd7578fd3..6cc5a0819959 100644
> > --- a/include/linux/mfd/rohm-generic.h
> > +++ b/include/linux/mfd/rohm-generic.h
> > @@ -4,6 +4,9 @@
> >  #ifndef __LINUX_MFD_ROHM_H__
> >  #define __LINUX_MFD_ROHM_H__
> >  
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/driver.h>
> > +
> >  enum rohm_chip_type {
> >  	ROHM_CHIP_TYPE_BD71837 = 0,
> >  	ROHM_CHIP_TYPE_BD71847,
> > @@ -17,4 +20,67 @@ struct rohm_regmap_dev {
> >  	struct regmap *regmap;
> >  };
> >  
> > +enum {
> > +	ROHM_DVS_LEVEL_UNKNOWN,
> > +	ROHM_DVS_LEVEL_RUN,
> > +	ROHM_DVS_LEVEL_IDLE,
> > +	ROHM_DVS_LEVEL_SUSPEND,
> > +	ROHM_DVS_LEVEL_LPSR,
> > +#define ROHM_DVS_LEVEL_MAX ROHM_DVS_LEVEL_LPSR
> 
> Haven't seen this before.  Is it legit?
> 

I don't know why it wouldn't be :) I kind of grew used to that when I
still did some networking stuff.

It doesn't really matter in this case but for example the netlink
headers do:

enum {
   foo,
#define foo foo
   bar,
#define bar bar
...
};

https://elixir.bootlin.com/linux/v5.5-rc6/source/include/uapi/linux/rtnetlink.h

What is the good here is that this allows one to nicely exclude
unsupported stuff using preprocessor:

#include <header_with_or_without_foo_dependng_on_version.h>

#ifdef foo
use_foo(foo);
#endif

What about:
> 
>      ROHM_DVS_LEVEL_MAX = ROHM_DVS_LEVEL_LPSR

Anyways, I don't see why define wouldn't be Ok here - but sure it can
be changed if you insist ;) Just let me know if you can accept the
define or not :)


>
Lee Jones Jan. 17, 2020, 1:40 p.m. UTC | #3
On Fri, 17 Jan 2020, Vaittinen, Matti wrote:

> Hello Lee,
> 
> On Fri, 2020-01-17 at 10:28 +0000, Lee Jones wrote:
> > On Fri, 17 Jan 2020, Matti Vaittinen wrote:
> > 
> > > Few ROHM PMICs allow setting the voltage states for different
> > > system states
> > > like RUN, IDLE, SUSPEND and LPSR. States are then changed via SoC
> > > specific
> > > mechanisms. bd718x7 driver implemented device-tree parsing
> > > functions for
> > > these state specific voltages. The parsing functions can be re-used 
> > > by
> > > other ROHM chip drivers like bd71828. Split the generic functions
> > > from
> > > bd718x7-regulator.c to rohm-regulator.c and export them for other
> > > modules
> > > to use.
> > > 
> > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > > Acked-by: Mark Brown <broonie@kernel.org>
> > > ---
> > > no changes since v9
> > > 
> > >  drivers/regulator/Kconfig             |   4 +
> > >  drivers/regulator/Makefile            |   1 +
> > >  drivers/regulator/bd718x7-regulator.c | 183 ++++++++------------
> > > ------
> > >  drivers/regulator/rohm-regulator.c    |  95 +++++++++++++
> > >  include/linux/mfd/rohm-generic.h      |  66 ++++++++++
> > >  5 files changed, 221 insertions(+), 128 deletions(-)
> > >  create mode 100644 drivers/regulator/rohm-regulator.c
> > 
> > [...]
> > 
> > > diff --git a/include/linux/mfd/rohm-generic.h
> > > b/include/linux/mfd/rohm-generic.h
> > > index ff3dd7578fd3..6cc5a0819959 100644
> > > --- a/include/linux/mfd/rohm-generic.h
> > > +++ b/include/linux/mfd/rohm-generic.h
> > > @@ -4,6 +4,9 @@
> > >  #ifndef __LINUX_MFD_ROHM_H__
> > >  #define __LINUX_MFD_ROHM_H__
> > >  
> > > +#include <linux/regmap.h>
> > > +#include <linux/regulator/driver.h>
> > > +
> > >  enum rohm_chip_type {
> > >  	ROHM_CHIP_TYPE_BD71837 = 0,
> > >  	ROHM_CHIP_TYPE_BD71847,
> > > @@ -17,4 +20,67 @@ struct rohm_regmap_dev {
> > >  	struct regmap *regmap;
> > >  };
> > >  
> > > +enum {
> > > +	ROHM_DVS_LEVEL_UNKNOWN,
> > > +	ROHM_DVS_LEVEL_RUN,
> > > +	ROHM_DVS_LEVEL_IDLE,
> > > +	ROHM_DVS_LEVEL_SUSPEND,
> > > +	ROHM_DVS_LEVEL_LPSR,
> > > +#define ROHM_DVS_LEVEL_MAX ROHM_DVS_LEVEL_LPSR
> > 
> > Haven't seen this before.  Is it legit?
> > 
> 
> I don't know why it wouldn't be :) I kind of grew used to that when I
> still did some networking stuff.

Networking it not a good example.

It's full of odd little quirks to the standard styling.

> It doesn't really matter in this case but for example the netlink
> headers do:
> 
> enum {
>    foo,
> #define foo foo
>    bar,
> #define bar bar
> ...
> };
> 
> https://elixir.bootlin.com/linux/v5.5-rc6/source/include/uapi/linux/rtnetlink.h
> 
> What is the good here is that this allows one to nicely exclude
> unsupported stuff using preprocessor:
> 
> #include <header_with_or_without_foo_dependng_on_version.h>
> 
> #ifdef foo
> use_foo(foo);
> #endif
> 
> What about:
> > 
> >      ROHM_DVS_LEVEL_MAX = ROHM_DVS_LEVEL_LPSR
> 
> Anyways, I don't see why define wouldn't be Ok here - but sure it can
> be changed if you insist ;) Just let me know if you can accept the
> define or not :)

Let's go for not in this instance. :D
Vaittinen, Matti Jan. 20, 2020, 7:06 a.m. UTC | #4
Hello,

On Fri, 2020-01-17 at 13:40 +0000, Lee Jones wrote:
> On Fri, 17 Jan 2020, Vaittinen, Matti wrote:
> > > >  
> > > > +enum {
> > > > +	ROHM_DVS_LEVEL_UNKNOWN,
> > > > +	ROHM_DVS_LEVEL_RUN,
> > > > +	ROHM_DVS_LEVEL_IDLE,
> > > > +	ROHM_DVS_LEVEL_SUSPEND,
> > > > +	ROHM_DVS_LEVEL_LPSR,
> > > > +#define ROHM_DVS_LEVEL_MAX ROHM_DVS_LEVEL_LPSR
> > > 
> > > Haven't seen this before.  Is it legit?
> > > 
> > 
> > I don't know why it wouldn't be :) I kind of grew used to that when
> > I
> > still did some networking stuff.
> 
> Networking it not a good example.
> 
> It's full of odd little quirks to the standard styling.

That was quite a strong wording... Some people might disagree :)

Anyways, as far as I know the preprocessor does not care about where
the preprocessor directives are placed. It just goes through the file
sequentially and macro definitions take effect at the place you write
them. And actual compiler does not see the directive - just code which
has been replaced. So from C point of view I see no problem here. From
coding conventions or guidelines point of view - well, that's more of
your territory ;)

> > What about:
> > >      ROHM_DVS_LEVEL_MAX = ROHM_DVS_LEVEL_LPSR
> > 
> > Anyways, I don't see why define wouldn't be Ok here - but sure it
> > can
> > be changed if you insist ;) Just let me know if you can accept the
> > define or not :)
> 
> Let's go for not in this instance. :D

Ok. I sent v11 where this has been changed as you suggested :)

Br,
	--Matti

Patch
diff mbox series

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 74eb5af7295f..a4897ae52f14 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -197,6 +197,7 @@  config REGULATOR_BD70528
 config REGULATOR_BD718XX
 	tristate "ROHM BD71837 Power Regulator"
 	depends on MFD_ROHM_BD718XX
+	select REGULATOR_ROHM
 	help
 	  This driver supports voltage regulators on ROHM BD71837 PMIC.
 	  This will enable support for the software controllable buck
@@ -790,6 +791,9 @@  config REGULATOR_RN5T618
 	  Say y here to support the regulators found on Ricoh RN5T567,
 	  RN5T618 or RC5T619 PMIC.
 
+config REGULATOR_ROHM
+	tristate
+
 config REGULATOR_RT5033
 	tristate "Richtek RT5033 Regulators"
 	depends on MFD_RT5033
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 2210ba56f9bd..6bcab72c1fc7 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -99,6 +99,7 @@  obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
 obj-$(CONFIG_REGULATOR_RK808)   += rk808-regulator.o
 obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o
+obj-$(CONFIG_REGULATOR_ROHM)	+= rohm-regulator.o
 obj-$(CONFIG_REGULATOR_RT5033)	+= rt5033-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index 6beaf867d9cb..55decb58c777 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -318,6 +318,7 @@  struct reg_init {
 };
 struct bd718xx_regulator_data {
 	struct regulator_desc desc;
+	const struct rohm_dvs_config dvs;
 	const struct reg_init init;
 	const struct reg_init *additional_inits;
 	int additional_init_amnt;
@@ -349,133 +350,15 @@  static const struct reg_init bd71837_ldo6_inits[] = {
 	},
 };
 
-#define NUM_DVS_BUCKS 4
-
-struct of_dvs_setting {
-	const char *prop;
-	unsigned int reg;
-};
-
-static int set_dvs_levels(const struct of_dvs_setting *dvs,
-			  struct device_node *np,
-			  const struct regulator_desc *desc,
-			  struct regmap *regmap)
-{
-	int ret, i;
-	unsigned int uv;
-
-	ret = of_property_read_u32(np, dvs->prop, &uv);
-	if (ret) {
-		if (ret != -EINVAL)
-			return ret;
-		return 0;
-	}
-
-	for (i = 0; i < desc->n_voltages; i++) {
-		ret = regulator_desc_list_voltage_linear_range(desc, i);
-		if (ret < 0)
-			continue;
-		if (ret == uv) {
-			i <<= ffs(desc->vsel_mask) - 1;
-			ret = regmap_update_bits(regmap, dvs->reg,
-						 DVS_BUCK_RUN_MASK, i);
-			break;
-		}
-	}
-	return ret;
-}
-
-static int buck4_set_hw_dvs_levels(struct device_node *np,
+static int buck_set_hw_dvs_levels(struct device_node *np,
 			    const struct regulator_desc *desc,
 			    struct regulator_config *cfg)
 {
-	int ret, i;
-	const struct of_dvs_setting dvs[] = {
-		{
-			.prop = "rohm,dvs-run-voltage",
-			.reg = BD71837_REG_BUCK4_VOLT_RUN,
-		},
-	};
+	struct bd718xx_regulator_data *data;
 
-	for (i = 0; i < ARRAY_SIZE(dvs); i++) {
-		ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
-		if (ret)
-			break;
-	}
-	return ret;
-}
-static int buck3_set_hw_dvs_levels(struct device_node *np,
-			    const struct regulator_desc *desc,
-			    struct regulator_config *cfg)
-{
-	int ret, i;
-	const struct of_dvs_setting dvs[] = {
-		{
-			.prop = "rohm,dvs-run-voltage",
-			.reg = BD71837_REG_BUCK3_VOLT_RUN,
-		},
-	};
+	data = container_of(desc, struct bd718xx_regulator_data, desc);
 
-	for (i = 0; i < ARRAY_SIZE(dvs); i++) {
-		ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
-		if (ret)
-			break;
-	}
-	return ret;
-}
-
-static int buck2_set_hw_dvs_levels(struct device_node *np,
-			    const struct regulator_desc *desc,
-			    struct regulator_config *cfg)
-{
-	int ret, i;
-	const struct of_dvs_setting dvs[] = {
-		{
-			.prop = "rohm,dvs-run-voltage",
-			.reg = BD718XX_REG_BUCK2_VOLT_RUN,
-		},
-		{
-			.prop = "rohm,dvs-idle-voltage",
-			.reg = BD718XX_REG_BUCK2_VOLT_IDLE,
-		},
-	};
-
-
-
-	for (i = 0; i < ARRAY_SIZE(dvs); i++) {
-		ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
-		if (ret)
-			break;
-	}
-	return ret;
-}
-
-static int buck1_set_hw_dvs_levels(struct device_node *np,
-			    const struct regulator_desc *desc,
-			    struct regulator_config *cfg)
-{
-	int ret, i;
-	const struct of_dvs_setting dvs[] = {
-		{
-			.prop = "rohm,dvs-run-voltage",
-			.reg = BD718XX_REG_BUCK1_VOLT_RUN,
-		},
-		{
-			.prop = "rohm,dvs-idle-voltage",
-			.reg = BD718XX_REG_BUCK1_VOLT_IDLE,
-		},
-		{
-			.prop = "rohm,dvs-suspend-voltage",
-			.reg = BD718XX_REG_BUCK1_VOLT_SUSP,
-		},
-	};
-
-	for (i = 0; i < ARRAY_SIZE(dvs); i++) {
-		ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
-		if (ret)
-			break;
-	}
-	return ret;
+	return rohm_regulator_set_dvs_levels(&data->dvs, np, desc, cfg->regmap);
 }
 
 static const struct bd718xx_regulator_data bd71847_regulators[] = {
@@ -496,7 +379,17 @@  static const struct bd718xx_regulator_data bd71847_regulators[] = {
 			.enable_reg = BD718XX_REG_BUCK1_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
 			.owner = THIS_MODULE,
-			.of_parse_cb = buck1_set_hw_dvs_levels,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND,
+			.run_reg = BD718XX_REG_BUCK1_VOLT_RUN,
+			.run_mask = DVS_BUCK_RUN_MASK,
+			.idle_reg = BD718XX_REG_BUCK1_VOLT_IDLE,
+			.idle_mask = DVS_BUCK_RUN_MASK,
+			.suspend_reg = BD718XX_REG_BUCK1_VOLT_SUSP,
+			.suspend_mask = DVS_BUCK_RUN_MASK,
 		},
 		.init = {
 			.reg = BD718XX_REG_BUCK1_CTRL,
@@ -520,7 +413,14 @@  static const struct bd718xx_regulator_data bd71847_regulators[] = {
 			.enable_reg = BD718XX_REG_BUCK2_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
 			.owner = THIS_MODULE,
-			.of_parse_cb = buck2_set_hw_dvs_levels,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE,
+			.run_reg = BD718XX_REG_BUCK2_VOLT_RUN,
+			.run_mask = DVS_BUCK_RUN_MASK,
+			.idle_reg = BD718XX_REG_BUCK2_VOLT_IDLE,
+			.idle_mask = DVS_BUCK_RUN_MASK,
 		},
 		.init = {
 			.reg = BD718XX_REG_BUCK2_CTRL,
@@ -792,7 +692,17 @@  static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.enable_reg = BD718XX_REG_BUCK1_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
 			.owner = THIS_MODULE,
-			.of_parse_cb = buck1_set_hw_dvs_levels,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND,
+			.run_reg = BD718XX_REG_BUCK1_VOLT_RUN,
+			.run_mask = DVS_BUCK_RUN_MASK,
+			.idle_reg = BD718XX_REG_BUCK1_VOLT_IDLE,
+			.idle_mask = DVS_BUCK_RUN_MASK,
+			.suspend_reg = BD718XX_REG_BUCK1_VOLT_SUSP,
+			.suspend_mask = DVS_BUCK_RUN_MASK,
 		},
 		.init = {
 			.reg = BD718XX_REG_BUCK1_CTRL,
@@ -816,7 +726,14 @@  static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.enable_reg = BD718XX_REG_BUCK2_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
 			.owner = THIS_MODULE,
-			.of_parse_cb = buck2_set_hw_dvs_levels,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE,
+			.run_reg = BD718XX_REG_BUCK2_VOLT_RUN,
+			.run_mask = DVS_BUCK_RUN_MASK,
+			.idle_reg = BD718XX_REG_BUCK2_VOLT_IDLE,
+			.idle_mask = DVS_BUCK_RUN_MASK,
 		},
 		.init = {
 			.reg = BD718XX_REG_BUCK2_CTRL,
@@ -840,7 +757,12 @@  static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.enable_reg = BD71837_REG_BUCK3_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
 			.owner = THIS_MODULE,
-			.of_parse_cb = buck3_set_hw_dvs_levels,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			.level_map = ROHM_DVS_LEVEL_RUN,
+			.run_reg = BD71837_REG_BUCK3_VOLT_RUN,
+			.run_mask = DVS_BUCK_RUN_MASK,
 		},
 		.init = {
 			.reg = BD71837_REG_BUCK3_CTRL,
@@ -864,7 +786,12 @@  static const struct bd718xx_regulator_data bd71837_regulators[] = {
 			.enable_reg = BD71837_REG_BUCK4_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
 			.owner = THIS_MODULE,
-			.of_parse_cb = buck4_set_hw_dvs_levels,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			.level_map = ROHM_DVS_LEVEL_RUN,
+			.run_reg = BD71837_REG_BUCK4_VOLT_RUN,
+			.run_mask = DVS_BUCK_RUN_MASK,
 		},
 		.init = {
 			.reg = BD71837_REG_BUCK4_CTRL,
diff --git a/drivers/regulator/rohm-regulator.c b/drivers/regulator/rohm-regulator.c
new file mode 100644
index 000000000000..399002383b28
--- /dev/null
+++ b/drivers/regulator/rohm-regulator.c
@@ -0,0 +1,95 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2020 ROHM Semiconductors
+
+#include <linux/errno.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+static int set_dvs_level(const struct regulator_desc *desc,
+			 struct device_node *np, struct regmap *regmap,
+			 char *prop, unsigned int reg, unsigned int mask,
+			 unsigned int omask, unsigned int oreg)
+{
+	int ret, i;
+	uint32_t uv;
+
+	ret = of_property_read_u32(np, prop, &uv);
+	if (ret) {
+		if (ret != -EINVAL)
+			return ret;
+		return 0;
+	}
+
+	if (uv == 0) {
+		if (omask)
+			return regmap_update_bits(regmap, oreg, omask, 0);
+	}
+	for (i = 0; i < desc->n_voltages; i++) {
+		ret = regulator_desc_list_voltage_linear_range(desc, i);
+		if (ret < 0)
+			continue;
+		if (ret == uv) {
+			i <<= ffs(desc->vsel_mask) - 1;
+			ret = regmap_update_bits(regmap, reg, mask, i);
+			if (omask && !ret)
+				ret = regmap_update_bits(regmap, oreg, omask,
+							 omask);
+			break;
+		}
+	}
+	return ret;
+}
+
+int rohm_regulator_set_dvs_levels(const struct rohm_dvs_config *dvs,
+			  struct device_node *np,
+			  const struct regulator_desc *desc,
+			  struct regmap *regmap)
+{
+	int i, ret = 0;
+	char *prop;
+	unsigned int reg, mask, omask, oreg = desc->enable_reg;
+
+	for (i = 0; i < ROHM_DVS_LEVEL_MAX && !ret; i++) {
+		if (dvs->level_map & (1 << i)) {
+			switch (i + 1) {
+			case ROHM_DVS_LEVEL_RUN:
+				prop = "rohm,dvs-run-voltage";
+				reg = dvs->run_reg;
+				mask = dvs->run_mask;
+				omask = dvs->run_on_mask;
+				break;
+			case ROHM_DVS_LEVEL_IDLE:
+				prop = "rohm,dvs-idle-voltage";
+				reg = dvs->idle_reg;
+				mask = dvs->idle_mask;
+				omask = dvs->idle_on_mask;
+				break;
+			case ROHM_DVS_LEVEL_SUSPEND:
+				prop = "rohm,dvs-suspend-voltage";
+				reg = dvs->suspend_reg;
+				mask = dvs->suspend_mask;
+				omask = dvs->suspend_on_mask;
+				break;
+			case ROHM_DVS_LEVEL_LPSR:
+				prop = "rohm,dvs-lpsr-voltage";
+				reg = dvs->lpsr_reg;
+				mask = dvs->lpsr_mask;
+				omask = dvs->lpsr_on_mask;
+				break;
+			default:
+				return -EINVAL;
+			}
+			ret = set_dvs_level(desc, np, regmap, prop, reg, mask,
+					    omask, oreg);
+		}
+	}
+	return ret;
+}
+EXPORT_SYMBOL(rohm_regulator_set_dvs_levels);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("Generic helpers for ROHM PMIC regulator drivers");
diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
index ff3dd7578fd3..6cc5a0819959 100644
--- a/include/linux/mfd/rohm-generic.h
+++ b/include/linux/mfd/rohm-generic.h
@@ -4,6 +4,9 @@ 
 #ifndef __LINUX_MFD_ROHM_H__
 #define __LINUX_MFD_ROHM_H__
 
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
 enum rohm_chip_type {
 	ROHM_CHIP_TYPE_BD71837 = 0,
 	ROHM_CHIP_TYPE_BD71847,
@@ -17,4 +20,67 @@  struct rohm_regmap_dev {
 	struct regmap *regmap;
 };
 
+enum {
+	ROHM_DVS_LEVEL_UNKNOWN,
+	ROHM_DVS_LEVEL_RUN,
+	ROHM_DVS_LEVEL_IDLE,
+	ROHM_DVS_LEVEL_SUSPEND,
+	ROHM_DVS_LEVEL_LPSR,
+#define ROHM_DVS_LEVEL_MAX ROHM_DVS_LEVEL_LPSR
+};
+
+/**
+ * struct rohm_dvs_config - dynamic voltage scaling register descriptions
+ *
+ * @level_map:		bitmap representing supported run-levels for this
+ *			regulator
+ * @run_reg:		register address for regulator config at 'run' state
+ * @run_mask:		value mask for regulator voltages at 'run' state
+ * @run_on_mask:	enable mask for regulator at 'run' state
+ * @idle_reg:		register address for regulator config at 'idle' state
+ * @idle_mask:		value mask for regulator voltages at 'idle' state
+ * @idle_on_mask:	enable mask for regulator at 'idle' state
+ * @suspend_reg:	register address for regulator config at 'suspend' state
+ * @suspend_mask:	value mask for regulator voltages at 'suspend' state
+ * @suspend_on_mask:	enable mask for regulator at 'suspend' state
+ * @lpsr_reg:		register address for regulator config at 'lpsr' state
+ * @lpsr_mask:		value mask for regulator voltages at 'lpsr' state
+ * @lpsr_on_mask:	enable mask for regulator at 'lpsr' state
+ *
+ * Description of ROHM PMICs voltage configuration registers for different
+ * system states. This is used to correctly configure the PMIC at startup
+ * based on values read from DT.
+ */
+struct rohm_dvs_config {
+	uint64_t level_map;
+	unsigned int run_reg;
+	unsigned int run_mask;
+	unsigned int run_on_mask;
+	unsigned int idle_reg;
+	unsigned int idle_mask;
+	unsigned int idle_on_mask;
+	unsigned int suspend_reg;
+	unsigned int suspend_mask;
+	unsigned int suspend_on_mask;
+	unsigned int lpsr_reg;
+	unsigned int lpsr_mask;
+	unsigned int lpsr_on_mask;
+};
+
+#if IS_ENABLED(CONFIG_REGULATOR_ROHM)
+int rohm_regulator_set_dvs_levels(const struct rohm_dvs_config *dvs,
+				  struct device_node *np,
+				  const struct regulator_desc *desc,
+				  struct regmap *regmap);
+
+#else
+static inline int rohm_regulator_set_dvs_levels(const struct rohm_dvs_config *dvs,
+						struct device_node *np,
+						const struct regulator_desc *desc,
+						struct regmap *regmap)
+{
+	return 0;
+}
+#endif
+
 #endif