diff mbox series

[U-Boot,v2,5/6] arm: K3: Increase default SYSFW image size allocation

Message ID 20200110193523.2865-6-afd@ti.com
State Accepted, archived
Commit c0910bb3a04cf701c8d5f9258c83cc1390cc18b3
Delegated to: Lokesh Vutla
Headers show
Series J721e HS device support | expand

Commit Message

Andrew Davis Jan. 10, 2020, 7:35 p.m. UTC 
The memory allocated to store the FIT image containing SYSFW and board
configuration data is statically defined to the largest size expected.
This was 276000 bytes but now needs to be grown to 277000 to make room
for the slightly larger SYSFW image used on J721e High-Security devices.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-k3/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 5583241943..2e111bbf27 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -119,7 +119,7 @@  config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
 config K3_SYSFW_IMAGE_SIZE_MAX
 	int "Amount of memory dynamically allocated for loading SYSFW blob"
 	depends on K3_LOAD_SYSFW
-	default	276000
+	default	277000
 	help
 	  Amount of memory (in bytes) reserved through dynamic allocation at
 	  runtime for loading the combined System Firmware and configuration image