@@ -61,11 +61,9 @@ enum jz_version {
ID_JZ4740,
ID_JZ4725B,
ID_JZ4760,
- ID_JZ4760B,
ID_JZ4770,
ID_JZ4780,
ID_X1000,
- ID_X1000E,
ID_X1500,
ID_X1830,
};
@@ -615,18 +613,6 @@ static const struct ingenic_chip_info jz4760_chip_info = {
.pull_downs = jz4760_pull_downs,
};
-static const struct ingenic_chip_info jz4760b_chip_info = {
- .num_chips = 6,
- .reg_offset = 0x100,
- .version = ID_JZ4760B,
- .groups = jz4760_groups,
- .num_groups = ARRAY_SIZE(jz4760_groups),
- .functions = jz4760_functions,
- .num_functions = ARRAY_SIZE(jz4760_functions),
- .pull_ups = jz4760_pull_ups,
- .pull_downs = jz4760_pull_downs,
-};
-
static const u32 jz4770_pull_ups[6] = {
0x3fffffff, 0xfff0030c, 0xffffffff, 0xffff4fff, 0xfffffb7c, 0xffa7f00f,
};
@@ -1300,18 +1286,6 @@ static const struct ingenic_chip_info x1000_chip_info = {
.pull_downs = x1000_pull_downs,
};
-static const struct ingenic_chip_info x1000e_chip_info = {
- .num_chips = 4,
- .reg_offset = 0x100,
- .version = ID_X1000E,
- .groups = x1000_groups,
- .num_groups = ARRAY_SIZE(x1000_groups),
- .functions = x1000_functions,
- .num_functions = ARRAY_SIZE(x1000_functions),
- .pull_ups = x1000_pull_ups,
- .pull_downs = x1000_pull_downs,
-};
-
static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
static int x1500_uart0_hwflow_pins[] = { 0x4c, 0x4d, };
static int x1500_uart1_data_a_pins[] = { 0x04, 0x05, };
@@ -2460,11 +2434,11 @@ static const struct of_device_id ingenic_pinctrl_of_match[] = {
{ .compatible = "ingenic,jz4740-pinctrl", .data = &jz4740_chip_info },
{ .compatible = "ingenic,jz4725b-pinctrl", .data = &jz4725b_chip_info },
{ .compatible = "ingenic,jz4760-pinctrl", .data = &jz4760_chip_info },
- { .compatible = "ingenic,jz4760b-pinctrl", .data = &jz4760b_chip_info },
+ { .compatible = "ingenic,jz4760b-pinctrl", .data = &jz4760_chip_info },
{ .compatible = "ingenic,jz4770-pinctrl", .data = &jz4770_chip_info },
{ .compatible = "ingenic,jz4780-pinctrl", .data = &jz4780_chip_info },
{ .compatible = "ingenic,x1000-pinctrl", .data = &x1000_chip_info },
- { .compatible = "ingenic,x1000e-pinctrl", .data = &x1000e_chip_info },
+ { .compatible = "ingenic,x1000e-pinctrl", .data = &x1000_chip_info },
{ .compatible = "ingenic,x1500-pinctrl", .data = &x1500_chip_info },
{ .compatible = "ingenic,x1830-pinctrl", .data = &x1830_chip_info },
{},
Until there is the need to handle the JZ4760B and X1000E differently there is no reason to use a separate ingenic_chip_info since the data it contains is the same than for the JZ4760 and X1000 respectively. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/pinctrl/pinctrl-ingenic.c | 30 ++---------------------------- 1 file changed, 2 insertions(+), 28 deletions(-)