[V3,18/18] arm64: tegra: Enable xudc node on Jetson TX2
diff mbox series

Message ID 1577704195-2535-19-git-send-email-nkristam@nvidia.com
State Changes Requested
Headers show
Series
  • Tegra XUSB OTG support
Related show

Commit Message

Nagarjuna Kristam Dec. 30, 2019, 11:09 a.m. UTC
Enable XUSB device mode driver for USB 2-0 slot on Jetson TX2.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
V2-V3:
 - No changes in this version
---
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index a1dcdb9..d7628f5 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -131,7 +131,7 @@ 
 				status = "okay";
 
 				lanes {
-					usb2-0 {
+					micro_b: usb2-0 {
 						nvidia,function = "xusb";
 						status = "okay";
 					};
@@ -213,6 +213,13 @@ 
 		phy-names = "usb2-0", "usb2-1", "usb3-0";
 	};
 
+	usb@3550000 {
+		status = "okay";
+
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+	};
+
 	i2c@c250000 {
 		/* carrier board ID EEPROM */
 		eeprom@57 {