diff mbox series

[dev-5.4,08/14] ARM: dts: npcm7xx: Add PECI node

Message ID 20191218012808.6482-9-jae.hyun.yoo@linux.intel.com
State Accepted, archived
Headers show
Series PECI device driver introduction | expand

Commit Message

Jae Hyun Yoo Dec. 18, 2019, 1:28 a.m. UTC 
From: Tomer Maimon <tmaimon77@gmail.com>

This commit adds PECI node for npcm7xx.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
---
Changes since v11:
- None

Changes since v10:
- Newly added in v11.

 arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
index da02aa70df06..72841f54deb4
--- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
@@ -345,14 +345,11 @@ 
 				};
 			};
 
-			peci: peci-bus@100000 {
-				compatible = "nuvoton,npcm750-peci";
-				reg = <0x100000 0x200>;
+			peci: bus@100000 {
+				compatible = "simple-bus";
 				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk NPCM7XX_CLK_APB3>;
-				status = "disabled";
+				#size-cells = <1>;
+				ranges = <0x0 0x100000 0x200>;
 			};
 
 			spi0: spi@200000 {
@@ -1257,3 +1254,15 @@ 
 		};
 	};
 };
+
+&peci {
+	peci0: peci-bus@0 {
+		compatible = "nuvoton,npcm750-peci";
+		reg = <0x0 0x200>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk NPCM7XX_CLK_APB3>;
+		status = "disabled";
+	};
+};