Message ID | 20191212160413.15232-2-m.felsch@pengutronix.de |
---|---|
State | New |
Headers | show |
Series | [RESEND,v3,1/3] dt-bindings: mfd: da9062: add gpio bindings | expand |
On 12 December 2019 16:04, Marco Felsch wrote: > Add gpio device documentation to make the da9062 gpios available for > users. > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> > --- > Changelog: > > v2: > - remove sub-node documentation > - squash gpio properties into mfd documentation > --- > Documentation/devicetree/bindings/mfd/da9062.txt | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt > b/Documentation/devicetree/bindings/mfd/da9062.txt > index edca653a5777..089a28bc77a4 100644 > --- a/Documentation/devicetree/bindings/mfd/da9062.txt > +++ b/Documentation/devicetree/bindings/mfd/da9062.txt > @@ -13,6 +13,7 @@ da9062-rtc : : Real-Time Clock > da9062-onkey : : On Key > da9062-watchdog : : Watchdog Timer > da9062-thermal : : Thermal > +da9062-gpio : : GPIOs > > The DA9061 PMIC consists of: > > @@ -38,6 +39,15 @@ Required properties: > See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for > further information on IRQ bindings. > > +Optional properties: > + > +- gpio-controller : Marks the device as a gpio controller. > +- #gpio-cells : Should be two. The first cell is the pin number and the > + second cell is used to specify the gpio polarity. > + > +See Documentation/devicetree/bindings/gpio/gpio.txt for further information > on > +GPIO bindings. > + > Sub-nodes: > > - regulators : This node defines the settings for the LDOs and BUCKs. > -- > 2.20.1
On Thu, 12 Dec 2019, Marco Felsch wrote: > Add gpio device documentation to make the da9062 gpios available for > users. > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> > --- > Changelog: > > v2: > - remove sub-node documentation > - squash gpio properties into mfd documentation > --- > Documentation/devicetree/bindings/mfd/da9062.txt | 10 ++++++++++ > 1 file changed, 10 insertions(+) For my own reference: Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
On Thu, 12 Dec 2019 17:04:11 +0100, Marco Felsch wrote: > Add gpio device documentation to make the da9062 gpios available for > users. > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> > --- > Changelog: > > v2: > - remove sub-node documentation > - squash gpio properties into mfd documentation > --- > Documentation/devicetree/bindings/mfd/da9062.txt | 10 ++++++++++ > 1 file changed, 10 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt index edca653a5777..089a28bc77a4 100644 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ b/Documentation/devicetree/bindings/mfd/da9062.txt @@ -13,6 +13,7 @@ da9062-rtc : : Real-Time Clock da9062-onkey : : On Key da9062-watchdog : : Watchdog Timer da9062-thermal : : Thermal +da9062-gpio : : GPIOs The DA9061 PMIC consists of: @@ -38,6 +39,15 @@ Required properties: See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for further information on IRQ bindings. +Optional properties: + +- gpio-controller : Marks the device as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify the gpio polarity. + +See Documentation/devicetree/bindings/gpio/gpio.txt for further information on +GPIO bindings. + Sub-nodes: - regulators : This node defines the settings for the LDOs and BUCKs.
Add gpio device documentation to make the da9062 gpios available for users. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- Changelog: v2: - remove sub-node documentation - squash gpio properties into mfd documentation --- Documentation/devicetree/bindings/mfd/da9062.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)