[v2,1/2] dt-bindings: pinctrl: qcom: Add new qup functions for sc7180
diff mbox series

Message ID 0101016ef36a5d13-457e6678-2e83-494e-8494-1b0776d5b7e4-000000@us-west-2.amazonses.com
State New
Headers show
Series
  • [v2,1/2] dt-bindings: pinctrl: qcom: Add new qup functions for sc7180
Related show

Commit Message

Rajendra Nayak Dec. 11, 2019, 5:24 a.m. UTC
Add new qup functions for qup02/04/11 and qup13 wherein multiple
functions (for i2c and uart) share the same pin. This allows users
to identify which specific qup function for the instance one needs
to use for the pin.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Bjorn Andersson Dec. 11, 2019, 6:39 a.m. UTC | #1
On Tue 10 Dec 21:24 PST 2019, Rajendra Nayak wrote:

> Add new qup functions for qup02/04/11 and qup13 wherein multiple
> functions (for i2c and uart) share the same pin. This allows users
> to identify which specific qup function for the instance one needs
> to use for the pin.
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
> index b5767ee..6ffeac9 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
> @@ -125,8 +125,9 @@ to specify in a pin configuration subnode:
>  		    mi2s_1, mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag,
>  		    PLL_BIST, pll_bypassnl, pll_reset, prng_rosc, qdss,
>  		    qdss_cti, qlink_enable, qlink_request, qspi_clk, qspi_cs,
> -		    qspi_data, qup00, qup01, qup02, qup03, qup04, qup05,
> -		    qup10, qup11, qup12, qup13, qup14, qup15, sdc1_tb,
> +		    qspi_data, qup00, qup01, qup02_i2c, qup02_uart, qup03,
> +		    qup04_i2c, qup04_uart, qup05, qup10, qup11_i2c, qup11_uart,
> +		    qup12, qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb,
>  		    sdc2_tb, sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2,
>  		    tgu_ch3, tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt,
>  		    usb_phy, vfr_1, _V_GPIO, _V_PPS_IN, _V_PPS_OUT,
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
Stephen Boyd Dec. 11, 2019, 5 p.m. UTC | #2
Quoting Rajendra Nayak (2019-12-10 21:24:24)
> Add new qup functions for qup02/04/11 and qup13 wherein multiple
> functions (for i2c and uart) share the same pin. This allows users
> to identify which specific qup function for the instance one needs
> to use for the pin.
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
index b5767ee..6ffeac9 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
@@ -125,8 +125,9 @@  to specify in a pin configuration subnode:
 		    mi2s_1, mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag,
 		    PLL_BIST, pll_bypassnl, pll_reset, prng_rosc, qdss,
 		    qdss_cti, qlink_enable, qlink_request, qspi_clk, qspi_cs,
-		    qspi_data, qup00, qup01, qup02, qup03, qup04, qup05,
-		    qup10, qup11, qup12, qup13, qup14, qup15, sdc1_tb,
+		    qspi_data, qup00, qup01, qup02_i2c, qup02_uart, qup03,
+		    qup04_i2c, qup04_uart, qup05, qup10, qup11_i2c, qup11_uart,
+		    qup12, qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb,
 		    sdc2_tb, sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2,
 		    tgu_ch3, tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt,
 		    usb_phy, vfr_1, _V_GPIO, _V_PPS_IN, _V_PPS_OUT,