[v3,1/3] pwm: jz4740: Use clocks from TCU driver
diff mbox series

Message ID 20191210152734.39588-1-paul@crapouillou.net
State New
Headers show
Series
  • [v3,1/3] pwm: jz4740: Use clocks from TCU driver
Related show

Commit Message

Paul Cercueil Dec. 10, 2019, 3:27 p.m. UTC
The ingenic-timer "TCU" driver provides us with clocks, that can be
(un)gated, reparented or reclocked from devicetree, instead of having
these settings hardcoded in this driver.

Each PWM channel's clk pointer is stored in PWM chip data to keep
the code simple. The calls to arch-specific timer code is replaced with
standard clock API calls to start and stop each channel's clock.

While this driver is devicetree-compatible, it is never (as of now)
probed from devicetree, so this change does not introduce a ABI problem
with current devicetree files.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---

Notes:
    v2: This patch is now before the patch introducing regmap, so the code
    	has changed a bit.
    v3: - Use %pe printf specifier to print error
    	- Update commit message
    	- Removed call to jz4740_timer_set_ctrl() in jz4740_pwm_free() which
    	  was reseting the clock's parent.

 drivers/pwm/Kconfig      |  1 +
 drivers/pwm/pwm-jz4740.c | 53 +++++++++++++++++++++++++++++-----------
 2 files changed, 40 insertions(+), 14 deletions(-)

Comments

Paul Cercueil Feb. 11, 2020, 3:04 p.m. UTC | #1
Hi,

Any feedback on this patchset?

-Paul


Le mar., déc. 10, 2019 at 16:27, Paul Cercueil <paul@crapouillou.net> 
a écrit :
> The ingenic-timer "TCU" driver provides us with clocks, that can be
> (un)gated, reparented or reclocked from devicetree, instead of having
> these settings hardcoded in this driver.
> 
> Each PWM channel's clk pointer is stored in PWM chip data to keep
> the code simple. The calls to arch-specific timer code is replaced 
> with
> standard clock API calls to start and stop each channel's clock.
> 
> While this driver is devicetree-compatible, it is never (as of now)
> probed from devicetree, so this change does not introduce a ABI 
> problem
> with current devicetree files.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Tested-by: Mathieu Malaterre <malat@debian.org>
> Tested-by: Artur Rojek <contact@artur-rojek.eu>
> ---
> 
> Notes:
>     v2: This patch is now before the patch introducing regmap, so the 
> code
>     	has changed a bit.
>     v3: - Use %pe printf specifier to print error
>     	- Update commit message
>     	- Removed call to jz4740_timer_set_ctrl() in jz4740_pwm_free() 
> which
>     	  was reseting the clock's parent.
> 
>  drivers/pwm/Kconfig      |  1 +
>  drivers/pwm/pwm-jz4740.c | 53 
> +++++++++++++++++++++++++++++-----------
>  2 files changed, 40 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index bd21655c37a6..15d3816341f3 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -225,6 +225,7 @@ config PWM_IMX_TPM
>  config PWM_JZ4740
>  	tristate "Ingenic JZ47xx PWM support"
>  	depends on MACH_INGENIC
> +	depends on COMMON_CLK
>  	help
>  	  Generic PWM framework driver for Ingenic JZ47xx based
>  	  machines.
> diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
> index 9d78cc21cb12..ee50ac5fabb6 100644
> --- a/drivers/pwm/pwm-jz4740.c
> +++ b/drivers/pwm/pwm-jz4740.c
> @@ -24,7 +24,6 @@
> 
>  struct jz4740_pwm_chip {
>  	struct pwm_chip chip;
> -	struct clk *clk;
>  };
> 
>  static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip 
> *chip)
> @@ -34,6 +33,11 @@ static inline struct jz4740_pwm_chip 
> *to_jz4740(struct pwm_chip *chip)
> 
>  static int jz4740_pwm_request(struct pwm_chip *chip, struct 
> pwm_device *pwm)
>  {
> +	struct jz4740_pwm_chip *jz = to_jz4740(chip);
> +	struct clk *clk;
> +	char clk_name[16];
> +	int ret;
> +
>  	/*
>  	 * Timers 0 and 1 are used for system tasks, so they are unavailable
>  	 * for use as PWMs.
> @@ -41,16 +45,32 @@ static int jz4740_pwm_request(struct pwm_chip 
> *chip, struct pwm_device *pwm)
>  	if (pwm->hwpwm < 2)
>  		return -EBUSY;
> 
> -	jz4740_timer_start(pwm->hwpwm);
> +	snprintf(clk_name, sizeof(clk_name), "timer%u", pwm->hwpwm);
> +
> +	clk = clk_get(chip->dev, clk_name);
> +	if (IS_ERR(clk)) {
> +		if (PTR_ERR(clk) != -EPROBE_DEFER)
> +			dev_err(chip->dev, "Failed to get clock: %pe", clk);
> +		return PTR_ERR(clk);
> +	}
> +
> +	ret = clk_prepare_enable(clk);
> +	if (ret) {
> +		clk_put(clk);
> +		return ret;
> +	}
> +
> +	pwm_set_chip_data(pwm, clk);
> 
>  	return 0;
>  }
> 
>  static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device 
> *pwm)
>  {
> -	jz4740_timer_set_ctrl(pwm->hwpwm, 0);
> +	struct clk *clk = pwm_get_chip_data(pwm);
> 
> -	jz4740_timer_stop(pwm->hwpwm);
> +	clk_disable_unprepare(clk);
> +	clk_put(clk);
>  }
> 
>  static int jz4740_pwm_enable(struct pwm_chip *chip, struct 
> pwm_device *pwm)
> @@ -91,17 +111,22 @@ static int jz4740_pwm_apply(struct pwm_chip 
> *chip, struct pwm_device *pwm,
>  			    const struct pwm_state *state)
>  {
>  	struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
> +	struct clk *clk = pwm_get_chip_data(pwm),
> +		   *parent_clk = clk_get_parent(clk);
> +	unsigned long rate, period, duty;
>  	unsigned long long tmp;
> -	unsigned long period, duty;
>  	unsigned int prescaler = 0;
>  	uint16_t ctrl;
> +	int err;
> 
> -	tmp = (unsigned long long)clk_get_rate(jz4740->clk) * state->period;
> +	rate = clk_get_rate(parent_clk);
> +	tmp = (unsigned long long)rate * state->period;
>  	do_div(tmp, 1000000000);
>  	period = tmp;
> 
>  	while (period > 0xffff && prescaler < 6) {
>  		period >>= 2;
> +		rate >>= 2;
>  		++prescaler;
>  	}
> 
> @@ -117,14 +142,18 @@ static int jz4740_pwm_apply(struct pwm_chip 
> *chip, struct pwm_device *pwm,
> 
>  	jz4740_pwm_disable(chip, pwm);
> 
> +	err = clk_set_rate(clk, rate);
> +	if (err) {
> +		dev_err(chip->dev, "Unable to set rate: %d", err);
> +		return err;
> +	}
> +
>  	jz4740_timer_set_count(pwm->hwpwm, 0);
>  	jz4740_timer_set_duty(pwm->hwpwm, duty);
>  	jz4740_timer_set_period(pwm->hwpwm, period);
> 
> -	ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT |
> -		JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
> -
> -	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
> +	ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
> +	ctrl |= JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
> 
>  	switch (state->polarity) {
>  	case PWM_POLARITY_NORMAL:
> @@ -158,10 +187,6 @@ static int jz4740_pwm_probe(struct 
> platform_device *pdev)
>  	if (!jz4740)
>  		return -ENOMEM;
> 
> -	jz4740->clk = devm_clk_get(&pdev->dev, "ext");
> -	if (IS_ERR(jz4740->clk))
> -		return PTR_ERR(jz4740->clk);
> -
>  	jz4740->chip.dev = &pdev->dev;
>  	jz4740->chip.ops = &jz4740_pwm_ops;
>  	jz4740->chip.npwm = NUM_PWM;
> --
> 2.24.0
>
Uwe Kleine-König Feb. 11, 2020, 4:46 p.m. UTC | #2
hello Paul,

thanks for the ping, I lost your series from my radar.

On Tue, Dec 10, 2019 at 04:27:32PM +0100, Paul Cercueil wrote:
> The ingenic-timer "TCU" driver provides us with clocks, that can be
> (un)gated, reparented or reclocked from devicetree, instead of having
> these settings hardcoded in this driver.
> 
> Each PWM channel's clk pointer is stored in PWM chip data to keep
> the code simple. The calls to arch-specific timer code is replaced with
> standard clock API calls to start and stop each channel's clock.
> 
> While this driver is devicetree-compatible, it is never (as of now)
> probed from devicetree, so this change does not introduce a ABI problem
> with current devicetree files.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Tested-by: Mathieu Malaterre <malat@debian.org>
> Tested-by: Artur Rojek <contact@artur-rojek.eu>
> ---
> 
> Notes:
>     v2: This patch is now before the patch introducing regmap, so the code
>     	has changed a bit.
>     v3: - Use %pe printf specifier to print error
>     	- Update commit message
>     	- Removed call to jz4740_timer_set_ctrl() in jz4740_pwm_free() which
>     	  was reseting the clock's parent.
> 
>  drivers/pwm/Kconfig      |  1 +
>  drivers/pwm/pwm-jz4740.c | 53 +++++++++++++++++++++++++++++-----------
>  2 files changed, 40 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index bd21655c37a6..15d3816341f3 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -225,6 +225,7 @@ config PWM_IMX_TPM
>  config PWM_JZ4740
>  	tristate "Ingenic JZ47xx PWM support"
>  	depends on MACH_INGENIC
> +	depends on COMMON_CLK
>  	help
>  	  Generic PWM framework driver for Ingenic JZ47xx based
>  	  machines.
> diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
> index 9d78cc21cb12..ee50ac5fabb6 100644
> --- a/drivers/pwm/pwm-jz4740.c
> +++ b/drivers/pwm/pwm-jz4740.c
> @@ -24,7 +24,6 @@
>  
>  struct jz4740_pwm_chip {
>  	struct pwm_chip chip;
> -	struct clk *clk;
>  };
>  
>  static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
> @@ -34,6 +33,11 @@ static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
>  
>  static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
>  {
> +	struct jz4740_pwm_chip *jz = to_jz4740(chip);
> +	struct clk *clk;
> +	char clk_name[16];
> +	int ret;
> +
>  	/*
>  	 * Timers 0 and 1 are used for system tasks, so they are unavailable
>  	 * for use as PWMs.
> @@ -41,16 +45,32 @@ static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
>  	if (pwm->hwpwm < 2)
>  		return -EBUSY;
>  
> -	jz4740_timer_start(pwm->hwpwm);
> +	snprintf(clk_name, sizeof(clk_name), "timer%u", pwm->hwpwm);
> +
> +	clk = clk_get(chip->dev, clk_name);
> +	if (IS_ERR(clk)) {
> +		if (PTR_ERR(clk) != -EPROBE_DEFER)
> +			dev_err(chip->dev, "Failed to get clock: %pe", clk);
> +		return PTR_ERR(clk);
> +	}
> +
> +	ret = clk_prepare_enable(clk);
> +	if (ret) {
> +		clk_put(clk);
> +		return ret;
> +	}
> +
> +	pwm_set_chip_data(pwm, clk);
>  
>  	return 0;
>  }
>  
>  static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
>  {
> -	jz4740_timer_set_ctrl(pwm->hwpwm, 0);
> +	struct clk *clk = pwm_get_chip_data(pwm);
>  
> -	jz4740_timer_stop(pwm->hwpwm);
> +	clk_disable_unprepare(clk);
> +	clk_put(clk);
>  }
>  
>  static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> @@ -91,17 +111,22 @@ static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>  			    const struct pwm_state *state)
>  {
>  	struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
> +	struct clk *clk = pwm_get_chip_data(pwm),
> +		   *parent_clk = clk_get_parent(clk);
> +	unsigned long rate, period, duty;
>  	unsigned long long tmp;
> -	unsigned long period, duty;
>  	unsigned int prescaler = 0;
>  	uint16_t ctrl;
> +	int err;
>  
> -	tmp = (unsigned long long)clk_get_rate(jz4740->clk) * state->period;
> +	rate = clk_get_rate(parent_clk);
> +	tmp = (unsigned long long)rate * state->period;
>  	do_div(tmp, 1000000000);
>  	period = tmp;
>  
>  	while (period > 0xffff && prescaler < 6) {
>  		period >>= 2;
> +		rate >>= 2;
>  		++prescaler;
>  	}
>  
> @@ -117,14 +142,18 @@ static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>  
>  	jz4740_pwm_disable(chip, pwm);
>  
> +	err = clk_set_rate(clk, rate);
> +	if (err) {
> +		dev_err(chip->dev, "Unable to set rate: %d", err);
> +		return err;
> +	}

What I don't like here is that you use internal knowledge about the
clock to set a specific rate. Given this is a 1:1 conversion to hide the
previously contained register accesses behind the clk API (which is a
fine move) this is ok. But IMHO this should be cleaned up to rely on the
clk code. The more natural thing to do here would be to calculate the
rate you can work with and request that. Maybe add a todo-comment to
clean this up?

> +
>  	jz4740_timer_set_count(pwm->hwpwm, 0);
>  	jz4740_timer_set_duty(pwm->hwpwm, duty);
>  	jz4740_timer_set_period(pwm->hwpwm, period);
>  
> -	ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT |
> -		JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
> -
> -	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
> +	ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
> +	ctrl |= JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
>  
>  	switch (state->polarity) {
>  	case PWM_POLARITY_NORMAL:
> @@ -158,10 +187,6 @@ static int jz4740_pwm_probe(struct platform_device *pdev)
>  	if (!jz4740)
>  		return -ENOMEM;
>  
> -	jz4740->clk = devm_clk_get(&pdev->dev, "ext");
> -	if (IS_ERR(jz4740->clk))
> -		return PTR_ERR(jz4740->clk);

Huh, jz4740->clk was never enabled?

Best regards
Uwe
Paul Cercueil Feb. 11, 2020, 5:07 p.m. UTC | #3
Hi Uwe,


Le mar., févr. 11, 2020 at 17:46, Uwe Kleine-König 
<u.kleine-koenig@pengutronix.de> a écrit :
> hello Paul,
> 
> thanks for the ping, I lost your series from my radar.
> 
> On Tue, Dec 10, 2019 at 04:27:32PM +0100, Paul Cercueil wrote:
>>  The ingenic-timer "TCU" driver provides us with clocks, that can be
>>  (un)gated, reparented or reclocked from devicetree, instead of 
>> having
>>  these settings hardcoded in this driver.
>> 
>>  Each PWM channel's clk pointer is stored in PWM chip data to keep
>>  the code simple. The calls to arch-specific timer code is replaced 
>> with
>>  standard clock API calls to start and stop each channel's clock.
>> 
>>  While this driver is devicetree-compatible, it is never (as of now)
>>  probed from devicetree, so this change does not introduce a ABI 
>> problem
>>  with current devicetree files.
>> 
>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>  Tested-by: Mathieu Malaterre <malat@debian.org>
>>  Tested-by: Artur Rojek <contact@artur-rojek.eu>
>>  ---
>> 
>>  Notes:
>>      v2: This patch is now before the patch introducing regmap, so 
>> the code
>>      	has changed a bit.
>>      v3: - Use %pe printf specifier to print error
>>      	- Update commit message
>>      	- Removed call to jz4740_timer_set_ctrl() in jz4740_pwm_free() 
>> which
>>      	  was reseting the clock's parent.
>> 
>>   drivers/pwm/Kconfig      |  1 +
>>   drivers/pwm/pwm-jz4740.c | 53 
>> +++++++++++++++++++++++++++++-----------
>>   2 files changed, 40 insertions(+), 14 deletions(-)
>> 
>>  diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
>>  index bd21655c37a6..15d3816341f3 100644
>>  --- a/drivers/pwm/Kconfig
>>  +++ b/drivers/pwm/Kconfig
>>  @@ -225,6 +225,7 @@ config PWM_IMX_TPM
>>   config PWM_JZ4740
>>   	tristate "Ingenic JZ47xx PWM support"
>>   	depends on MACH_INGENIC
>>  +	depends on COMMON_CLK
>>   	help
>>   	  Generic PWM framework driver for Ingenic JZ47xx based
>>   	  machines.
>>  diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
>>  index 9d78cc21cb12..ee50ac5fabb6 100644
>>  --- a/drivers/pwm/pwm-jz4740.c
>>  +++ b/drivers/pwm/pwm-jz4740.c
>>  @@ -24,7 +24,6 @@
>> 
>>   struct jz4740_pwm_chip {
>>   	struct pwm_chip chip;
>>  -	struct clk *clk;
>>   };
>> 
>>   static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip 
>> *chip)
>>  @@ -34,6 +33,11 @@ static inline struct jz4740_pwm_chip 
>> *to_jz4740(struct pwm_chip *chip)
>> 
>>   static int jz4740_pwm_request(struct pwm_chip *chip, struct 
>> pwm_device *pwm)
>>   {
>>  +	struct jz4740_pwm_chip *jz = to_jz4740(chip);
>>  +	struct clk *clk;
>>  +	char clk_name[16];
>>  +	int ret;
>>  +
>>   	/*
>>   	 * Timers 0 and 1 are used for system tasks, so they are 
>> unavailable
>>   	 * for use as PWMs.
>>  @@ -41,16 +45,32 @@ static int jz4740_pwm_request(struct pwm_chip 
>> *chip, struct pwm_device *pwm)
>>   	if (pwm->hwpwm < 2)
>>   		return -EBUSY;
>> 
>>  -	jz4740_timer_start(pwm->hwpwm);
>>  +	snprintf(clk_name, sizeof(clk_name), "timer%u", pwm->hwpwm);
>>  +
>>  +	clk = clk_get(chip->dev, clk_name);
>>  +	if (IS_ERR(clk)) {
>>  +		if (PTR_ERR(clk) != -EPROBE_DEFER)
>>  +			dev_err(chip->dev, "Failed to get clock: %pe", clk);
>>  +		return PTR_ERR(clk);
>>  +	}
>>  +
>>  +	ret = clk_prepare_enable(clk);
>>  +	if (ret) {
>>  +		clk_put(clk);
>>  +		return ret;
>>  +	}
>>  +
>>  +	pwm_set_chip_data(pwm, clk);
>> 
>>   	return 0;
>>   }
>> 
>>   static void jz4740_pwm_free(struct pwm_chip *chip, struct 
>> pwm_device *pwm)
>>   {
>>  -	jz4740_timer_set_ctrl(pwm->hwpwm, 0);
>>  +	struct clk *clk = pwm_get_chip_data(pwm);
>> 
>>  -	jz4740_timer_stop(pwm->hwpwm);
>>  +	clk_disable_unprepare(clk);
>>  +	clk_put(clk);
>>   }
>> 
>>   static int jz4740_pwm_enable(struct pwm_chip *chip, struct 
>> pwm_device *pwm)
>>  @@ -91,17 +111,22 @@ static int jz4740_pwm_apply(struct pwm_chip 
>> *chip, struct pwm_device *pwm,
>>   			    const struct pwm_state *state)
>>   {
>>   	struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
>>  +	struct clk *clk = pwm_get_chip_data(pwm),
>>  +		   *parent_clk = clk_get_parent(clk);
>>  +	unsigned long rate, period, duty;
>>   	unsigned long long tmp;
>>  -	unsigned long period, duty;
>>   	unsigned int prescaler = 0;
>>   	uint16_t ctrl;
>>  +	int err;
>> 
>>  -	tmp = (unsigned long long)clk_get_rate(jz4740->clk) * 
>> state->period;
>>  +	rate = clk_get_rate(parent_clk);
>>  +	tmp = (unsigned long long)rate * state->period;
>>   	do_div(tmp, 1000000000);
>>   	period = tmp;
>> 
>>   	while (period > 0xffff && prescaler < 6) {
>>   		period >>= 2;
>>  +		rate >>= 2;
>>   		++prescaler;
>>   	}
>> 
>>  @@ -117,14 +142,18 @@ static int jz4740_pwm_apply(struct pwm_chip 
>> *chip, struct pwm_device *pwm,
>> 
>>   	jz4740_pwm_disable(chip, pwm);
>> 
>>  +	err = clk_set_rate(clk, rate);
>>  +	if (err) {
>>  +		dev_err(chip->dev, "Unable to set rate: %d", err);
>>  +		return err;
>>  +	}
> 
> What I don't like here is that you use internal knowledge about the
> clock to set a specific rate. Given this is a 1:1 conversion to hide 
> the
> previously contained register accesses behind the clk API (which is a
> fine move) this is ok. But IMHO this should be cleaned up to rely on 
> the
> clk code. The more natural thing to do here would be to calculate the
> rate you can work with and request that. Maybe add a todo-comment to
> clean this up?

Yes, I am very aware of that - I had a patch to clean it up but we 
disagreed on the algorithm, so I left it for later, since these three 
patches are much more important for now. Not sure it needs a TODO, I 
plan to submit the cleanup patch once these are merged, but I can send 
a v4 if you prefer.

> 
>>  +
>>   	jz4740_timer_set_count(pwm->hwpwm, 0);
>>   	jz4740_timer_set_duty(pwm->hwpwm, duty);
>>   	jz4740_timer_set_period(pwm->hwpwm, period);
>> 
>>  -	ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT 
>> |
>>  -		JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
>>  -
>>  -	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
>>  +	ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
>>  +	ctrl |= JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
>> 
>>   	switch (state->polarity) {
>>   	case PWM_POLARITY_NORMAL:
>>  @@ -158,10 +187,6 @@ static int jz4740_pwm_probe(struct 
>> platform_device *pdev)
>>   	if (!jz4740)
>>   		return -ENOMEM;
>> 
>>  -	jz4740->clk = devm_clk_get(&pdev->dev, "ext");
>>  -	if (IS_ERR(jz4740->clk))
>>  -		return PTR_ERR(jz4740->clk);
> 
> Huh, jz4740->clk was never enabled?

Correct. The "ext" clock is an external oscillator that is always 
enabled, so the code just didn't bother calling clk_enable (but it's a 
bug of course).

Cheers,
-Paul

Patch
diff mbox series

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index bd21655c37a6..15d3816341f3 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -225,6 +225,7 @@  config PWM_IMX_TPM
 config PWM_JZ4740
 	tristate "Ingenic JZ47xx PWM support"
 	depends on MACH_INGENIC
+	depends on COMMON_CLK
 	help
 	  Generic PWM framework driver for Ingenic JZ47xx based
 	  machines.
diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
index 9d78cc21cb12..ee50ac5fabb6 100644
--- a/drivers/pwm/pwm-jz4740.c
+++ b/drivers/pwm/pwm-jz4740.c
@@ -24,7 +24,6 @@ 
 
 struct jz4740_pwm_chip {
 	struct pwm_chip chip;
-	struct clk *clk;
 };
 
 static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
@@ -34,6 +33,11 @@  static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
 
 static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 {
+	struct jz4740_pwm_chip *jz = to_jz4740(chip);
+	struct clk *clk;
+	char clk_name[16];
+	int ret;
+
 	/*
 	 * Timers 0 and 1 are used for system tasks, so they are unavailable
 	 * for use as PWMs.
@@ -41,16 +45,32 @@  static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 	if (pwm->hwpwm < 2)
 		return -EBUSY;
 
-	jz4740_timer_start(pwm->hwpwm);
+	snprintf(clk_name, sizeof(clk_name), "timer%u", pwm->hwpwm);
+
+	clk = clk_get(chip->dev, clk_name);
+	if (IS_ERR(clk)) {
+		if (PTR_ERR(clk) != -EPROBE_DEFER)
+			dev_err(chip->dev, "Failed to get clock: %pe", clk);
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		clk_put(clk);
+		return ret;
+	}
+
+	pwm_set_chip_data(pwm, clk);
 
 	return 0;
 }
 
 static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	jz4740_timer_set_ctrl(pwm->hwpwm, 0);
+	struct clk *clk = pwm_get_chip_data(pwm);
 
-	jz4740_timer_stop(pwm->hwpwm);
+	clk_disable_unprepare(clk);
+	clk_put(clk);
 }
 
 static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
@@ -91,17 +111,22 @@  static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			    const struct pwm_state *state)
 {
 	struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
+	struct clk *clk = pwm_get_chip_data(pwm),
+		   *parent_clk = clk_get_parent(clk);
+	unsigned long rate, period, duty;
 	unsigned long long tmp;
-	unsigned long period, duty;
 	unsigned int prescaler = 0;
 	uint16_t ctrl;
+	int err;
 
-	tmp = (unsigned long long)clk_get_rate(jz4740->clk) * state->period;
+	rate = clk_get_rate(parent_clk);
+	tmp = (unsigned long long)rate * state->period;
 	do_div(tmp, 1000000000);
 	period = tmp;
 
 	while (period > 0xffff && prescaler < 6) {
 		period >>= 2;
+		rate >>= 2;
 		++prescaler;
 	}
 
@@ -117,14 +142,18 @@  static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	jz4740_pwm_disable(chip, pwm);
 
+	err = clk_set_rate(clk, rate);
+	if (err) {
+		dev_err(chip->dev, "Unable to set rate: %d", err);
+		return err;
+	}
+
 	jz4740_timer_set_count(pwm->hwpwm, 0);
 	jz4740_timer_set_duty(pwm->hwpwm, duty);
 	jz4740_timer_set_period(pwm->hwpwm, period);
 
-	ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT |
-		JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
-
-	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+	ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
+	ctrl |= JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
 
 	switch (state->polarity) {
 	case PWM_POLARITY_NORMAL:
@@ -158,10 +187,6 @@  static int jz4740_pwm_probe(struct platform_device *pdev)
 	if (!jz4740)
 		return -ENOMEM;
 
-	jz4740->clk = devm_clk_get(&pdev->dev, "ext");
-	if (IS_ERR(jz4740->clk))
-		return PTR_ERR(jz4740->clk);
-
 	jz4740->chip.dev = &pdev->dev;
 	jz4740->chip.ops = &jz4740_pwm_ops;
 	jz4740->chip.npwm = NUM_PWM;