diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index f85ae56..c47f2f9 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -26,28 +26,29 @@
  */
 
 #include <common.h>
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
 #include <asm/arch/clocks.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/omap_common.h>
 #include <asm/utils.h>
 
-static inline u32 emif_num(u32 base)
+inline u32 emif_num(u32 base)
 {
-	if (base == OMAP44XX_EMIF1)
+	if (base == EMIF1_BASE)
 		return 1;
-	else if (base == OMAP44XX_EMIF2)
+	else if (base == EMIF2_BASE)
 		return 2;
 	else
 		return 0;
 }
 
+
 static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
 {
 	u32 mr;
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
-	mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
+	mr_addr |= cs << EMIF_REG_CS_SHIFT;
 	writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
 	if (omap_revision() == OMAP4430_ES2_0)
 		mr = readl(&emif->emif_lpddr2_mode_reg_data_es2);
@@ -62,7 +63,7 @@ static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
-	mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
+	mr_addr |= cs << EMIF_REG_CS_SHIFT;
 	writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
 	writel(mr_val, &emif->emif_lpddr2_mode_reg_data);
 }
@@ -73,7 +74,7 @@ void emif_reset_phy(u32 base)
 	u32 iodft;
 
 	iodft = readl(&emif->emif_iodft_tlgc);
-	iodft |= OMAP44XX_REG_RESET_PHY_MASK;
+	iodft |= EMIF_REG_RESET_PHY_MASK;
 	writel(iodft, &emif->emif_iodft_tlgc);
 }
 
@@ -96,7 +97,7 @@ static void do_lpddr2_init(u32 base, u32 cs)
 	 * Enable refresh along with writing MR2
 	 * Encoding of RL in MR2 is (RL - 2)
 	 */
-	mr_addr = LPDDR2_MR2 | OMAP44XX_REG_REFRESH_EN_MASK;
+	mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
 	set_mr(base, cs, mr_addr, RL_FINAL - 2);
 }
 
@@ -105,13 +106,13 @@ static void lpddr2_init(u32 base, const struct emif_regs *regs)
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
 	/* Not NVM */
-	clrbits_le32(&emif->emif_lpddr2_nvm_config, OMAP44XX_REG_CS1NVMEN_MASK);
+	clrbits_le32(&emif->emif_lpddr2_nvm_config, EMIF_REG_CS1NVMEN_MASK);
 
 	/*
 	 * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM
 	 * when EMIF_SDRAM_CONFIG register is written
 	 */
-	setbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
+	setbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
 
 	/*
 	 * Set the SDRAM_CONFIG and PHY_CTRL for the
@@ -121,18 +122,18 @@ static void lpddr2_init(u32 base, const struct emif_regs *regs)
 	writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
 
 	do_lpddr2_init(base, CS0);
-	if (regs->sdram_config & OMAP44XX_REG_EBANK_MASK)
+	if (regs->sdram_config & EMIF_REG_EBANK_MASK)
 		do_lpddr2_init(base, CS1);
 
 	writel(regs->sdram_config, &emif->emif_sdram_config);
 	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
 
 	/* Enable refresh now */
-	clrbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
+	clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
 
 }
 
-static void emif_update_timings(u32 base, const struct emif_regs *regs)
+void emif_update_timings(u32 base, const struct emif_regs *regs)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
@@ -152,7 +153,10 @@ static void emif_update_timings(u32 base, const struct emif_regs *regs)
 	writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
 	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
 
-	if (omap_revision() >= OMAP4460_ES1_0) {
+	if (omap_revision() == OMAP5430_ES1_0) {
+		writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
+			&emif->emif_l3_config);
+	} else if (omap_revision() >= OMAP4460_ES1_0) {
 		writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
 			&emif->emif_l3_config);
 	} else {
@@ -164,10 +168,6 @@ static void emif_update_timings(u32 base, const struct emif_regs *regs)
 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 #define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
 
-static u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
-static u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
-static u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
-
 /*
  * Organization and refresh requirements for LPDDR2 devices of different
  * types and densities. Derived from JESD209-2 section 2.4
@@ -311,24 +311,24 @@ static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device,
 {
 	u32 config_reg = 0;
 
-	config_reg |=  (cs0_device->type + 4) << OMAP44XX_REG_SDRAM_TYPE_SHIFT;
+	config_reg |=  (cs0_device->type + 4) << EMIF_REG_SDRAM_TYPE_SHIFT;
 	config_reg |=  EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING <<
-			OMAP44XX_REG_IBANK_POS_SHIFT;
+			EMIF_REG_IBANK_POS_SHIFT;
 
-	config_reg |= cs0_device->io_width << OMAP44XX_REG_NARROW_MODE_SHIFT;
+	config_reg |= cs0_device->io_width << EMIF_REG_NARROW_MODE_SHIFT;
 
-	config_reg |= RL << OMAP44XX_REG_CL_SHIFT;
+	config_reg |= RL << EMIF_REG_CL_SHIFT;
 
 	config_reg |= addressing->row_sz[cs0_device->io_width] <<
-			OMAP44XX_REG_ROWSIZE_SHIFT;
+			EMIF_REG_ROWSIZE_SHIFT;
 
-	config_reg |= addressing->num_banks << OMAP44XX_REG_IBANK_SHIFT;
+	config_reg |= addressing->num_banks << EMIF_REG_IBANK_SHIFT;
 
 	config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) <<
-			OMAP44XX_REG_EBANK_SHIFT;
+			EMIF_REG_EBANK_SHIFT;
 
 	config_reg |= addressing->col_sz[cs0_device->io_width] <<
-			OMAP44XX_REG_PAGESIZE_SHIFT;
+			EMIF_REG_PAGESIZE_SHIFT;
 
 	return config_reg;
 }
@@ -343,7 +343,7 @@ static u32 get_sdram_ref_ctrl(u32 freq,
 	 * division by 10000 to account for khz and x10 in t_REFI_us_x10
 	 */
 	val = addressing->t_REFI_us_x10 * freq_khz / 10000;
-	ref_ctrl |= val << OMAP44XX_REG_REFRESH_RATE_SHIFT;
+	ref_ctrl |= val << EMIF_REG_REFRESH_RATE_SHIFT;
 
 	return ref_ctrl;
 }
@@ -354,7 +354,7 @@ static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings,
 {
 	u32 tim1 = 0, val = 0;
 	val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1;
-	tim1 |= val << OMAP44XX_REG_T_WTR_SHIFT;
+	tim1 |= val << EMIF_REG_T_WTR_SHIFT;
 
 	if (addressing->num_banks == BANKS8)
 		val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) /
@@ -362,22 +362,22 @@ static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings,
 	else
 		val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1;
 
-	tim1 |= val << OMAP44XX_REG_T_RRD_SHIFT;
+	tim1 |= val << EMIF_REG_T_RRD_SHIFT;
 
 	val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1;
-	tim1 |= val << OMAP44XX_REG_T_RC_SHIFT;
+	tim1 |= val << EMIF_REG_T_RC_SHIFT;
 
 	val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1;
-	tim1 |= val << OMAP44XX_REG_T_RAS_SHIFT;
+	tim1 |= val << EMIF_REG_T_RAS_SHIFT;
 
 	val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1;
-	tim1 |= val << OMAP44XX_REG_T_WR_SHIFT;
+	tim1 |= val << EMIF_REG_T_WR_SHIFT;
 
 	val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1;
-	tim1 |= val << OMAP44XX_REG_T_RCD_SHIFT;
+	tim1 |= val << EMIF_REG_T_RCD_SHIFT;
 
 	val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1;
-	tim1 |= val << OMAP44XX_REG_T_RP_SHIFT;
+	tim1 |= val << EMIF_REG_T_RP_SHIFT;
 
 	return tim1;
 }
@@ -387,21 +387,21 @@ static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings,
 {
 	u32 tim2 = 0, val = 0;
 	val = max(min_tck->tCKE, timings->tCKE) - 1;
-	tim2 |= val << OMAP44XX_REG_T_CKE_SHIFT;
+	tim2 |= val << EMIF_REG_T_CKE_SHIFT;
 
 	val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1;
-	tim2 |= val << OMAP44XX_REG_T_RTP_SHIFT;
+	tim2 |= val << EMIF_REG_T_RTP_SHIFT;
 
 	/*
 	 * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the
 	 * same value
 	 */
 	val = ns_2_cycles(timings->tXSR) - 1;
-	tim2 |= val << OMAP44XX_REG_T_XSRD_SHIFT;
-	tim2 |= val << OMAP44XX_REG_T_XSNR_SHIFT;
+	tim2 |= val << EMIF_REG_T_XSRD_SHIFT;
+	tim2 |= val << EMIF_REG_T_XSNR_SHIFT;
 
 	val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1;
-	tim2 |= val << OMAP44XX_REG_T_XP_SHIFT;
+	tim2 |= val << EMIF_REG_T_XP_SHIFT;
 
 	return tim2;
 }
@@ -412,19 +412,19 @@ static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings,
 {
 	u32 tim3 = 0, val = 0;
 	val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF);
-	tim3 |= val << OMAP44XX_REG_T_RAS_MAX_SHIFT;
+	tim3 |= val << EMIF_REG_T_RAS_MAX_SHIFT;
 
 	val = ns_2_cycles(timings->tRFCab) - 1;
-	tim3 |= val << OMAP44XX_REG_T_RFC_SHIFT;
+	tim3 |= val << EMIF_REG_T_RFC_SHIFT;
 
 	val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1;
-	tim3 |= val << OMAP44XX_REG_T_TDQSCKMAX_SHIFT;
+	tim3 |= val << EMIF_REG_T_TDQSCKMAX_SHIFT;
 
 	val = ns_2_cycles(timings->tZQCS) - 1;
-	tim3 |= val << OMAP44XX_REG_ZQ_ZQCS_SHIFT;
+	tim3 |= val << EMIF_REG_ZQ_ZQCS_SHIFT;
 
 	val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1;
-	tim3 |= val << OMAP44XX_REG_T_CKESR_SHIFT;
+	tim3 |= val << EMIF_REG_T_CKESR_SHIFT;
 
 	return tim3;
 }
@@ -442,13 +442,13 @@ static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device,
 		val =
 		    EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 /
 		    addressing->t_REFI_us_x10;
-	zq |= val << OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT;
+	zq |= val << EMIF_REG_ZQ_REFINTERVAL_SHIFT;
 
-	zq |= (REG_ZQ_ZQCL_MULT - 1) << OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT;
+	zq |= (REG_ZQ_ZQCL_MULT - 1) << EMIF_REG_ZQ_ZQCL_MULT_SHIFT;
 
-	zq |= (REG_ZQ_ZQINIT_MULT - 1) << OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT;
+	zq |= (REG_ZQ_ZQINIT_MULT - 1) << EMIF_REG_ZQ_ZQINIT_MULT_SHIFT;
 
-	zq |= REG_ZQ_SFEXITEN_ENABLE << OMAP44XX_REG_ZQ_SFEXITEN_SHIFT;
+	zq |= REG_ZQ_SFEXITEN_ENABLE << EMIF_REG_ZQ_SFEXITEN_SHIFT;
 
 	/*
 	 * Assuming that two chipselects have a single calibration resistor
@@ -458,11 +458,11 @@ static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device,
 	 * that none of the boards today have calibration resistors per CS,
 	 * it would be an unnecessary overhead.
 	 */
-	zq |= REG_ZQ_DUALCALEN_DISABLE << OMAP44XX_REG_ZQ_DUALCALEN_SHIFT;
+	zq |= REG_ZQ_DUALCALEN_DISABLE << EMIF_REG_ZQ_DUALCALEN_SHIFT;
 
-	zq |= REG_ZQ_CS0EN_ENABLE << OMAP44XX_REG_ZQ_CS0EN_SHIFT;
+	zq |= REG_ZQ_CS0EN_ENABLE << EMIF_REG_ZQ_CS0EN_SHIFT;
 
-	zq |= (cs1_device ? 1 : 0) << OMAP44XX_REG_ZQ_CS1EN_SHIFT;
+	zq |= (cs1_device ? 1 : 0) << EMIF_REG_ZQ_CS1EN_SHIFT;
 
 	return zq;
 }
@@ -476,17 +476,17 @@ static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device,
 	    TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10;
 	if (is_derated)
 		interval *= 4;
-	alert |= interval << OMAP44XX_REG_TA_REFINTERVAL_SHIFT;
+	alert |= interval << EMIF_REG_TA_REFINTERVAL_SHIFT;
 
-	alert |= TEMP_ALERT_CONFIG_DEVCT_1 << OMAP44XX_REG_TA_DEVCNT_SHIFT;
+	alert |= TEMP_ALERT_CONFIG_DEVCT_1 << EMIF_REG_TA_DEVCNT_SHIFT;
 
-	alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << OMAP44XX_REG_TA_DEVWDT_SHIFT;
+	alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << EMIF_REG_TA_DEVWDT_SHIFT;
 
-	alert |= 1 << OMAP44XX_REG_TA_SFEXITEN_SHIFT;
+	alert |= 1 << EMIF_REG_TA_SFEXITEN_SHIFT;
 
-	alert |= 1 << OMAP44XX_REG_TA_CS0EN_SHIFT;
+	alert |= 1 << EMIF_REG_TA_CS0EN_SHIFT;
 
-	alert |= (cs1_device ? 1 : 0) << OMAP44XX_REG_TA_CS1EN_SHIFT;
+	alert |= (cs1_device ? 1 : 0) << EMIF_REG_TA_CS1EN_SHIFT;
 
 	return alert;
 }
@@ -499,9 +499,9 @@ static u32 get_read_idle_ctrl_reg(u8 volt_ramp)
 	else
 		/*Maximum value in normal conditions - suggested by hw team */
 		val = 0x1FF;
-	idle |= val << OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT;
+	idle |= val << EMIF_REG_READ_IDLE_INTERVAL_SHIFT;
 
-	idle |= EMIF_REG_READ_IDLE_LEN_VAL << OMAP44XX_REG_READ_IDLE_LEN_SHIFT;
+	idle |= EMIF_REG_READ_IDLE_LEN_VAL << EMIF_REG_READ_IDLE_LEN_SHIFT;
 
 	return idle;
 }
@@ -510,7 +510,7 @@ static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL)
 {
 	u32 phy = 0, val = 0;
 
-	phy |= (RL + 2) << OMAP44XX_REG_READ_LATENCY_SHIFT;
+	phy |= (RL + 2) << EMIF_REG_READ_LATENCY_SHIFT;
 
 	if (freq <= 100000000)
 		val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS;
@@ -518,11 +518,11 @@ static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL)
 		val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ;
 	else
 		val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ;
-	phy |= val << OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT;
+	phy |= val << EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT;
 
 	/* Other fields are constant magic values. Hardcode them together */
 	phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL <<
-		OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT;
+		EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT;
 
 	return phy;
 }
@@ -666,123 +666,6 @@ static void emif_calculate_regs(
 }
 #endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
 
-#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_400_mhz = {
-	.max_freq = 400000000,
-	.RL = 6,
-	.tRPab = 21,
-	.tRCD = 18,
-	.tWR = 15,
-	.tRASmin = 42,
-	.tRRD = 10,
-	.tWTRx2 = 15,
-	.tXSR = 140,
-	.tXPx2 = 15,
-	.tRFCab = 130,
-	.tRTPx2 = 15,
-	.tCKE = 3,
-	.tCKESR = 15,
-	.tZQCS = 90,
-	.tZQCL = 360,
-	.tZQINIT = 1000,
-	.tDQSCKMAXx2 = 11,
-	.tRASmax = 70,
-	.tFAW = 50
-};
-
-/* Base AC Timing values specified by JESD209-2 for 333 MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_333_mhz = {
-	.max_freq = 333000000,
-	.RL = 5,
-	.tRPab = 21,
-	.tRCD = 18,
-	.tWR = 15,
-	.tRASmin = 42,
-	.tRRD = 10,
-	.tWTRx2 = 15,
-	.tXSR = 140,
-	.tXPx2 = 15,
-	.tRFCab = 130,
-	.tRTPx2 = 15,
-	.tCKE = 3,
-	.tCKESR = 15,
-	.tZQCS = 90,
-	.tZQCL = 360,
-	.tZQINIT = 1000,
-	.tDQSCKMAXx2 = 11,
-	.tRASmax = 70,
-	.tFAW = 50
-};
-
-/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
-	.max_freq = 200000000,
-	.RL = 3,
-	.tRPab = 21,
-	.tRCD = 18,
-	.tWR = 15,
-	.tRASmin = 42,
-	.tRRD = 10,
-	.tWTRx2 = 20,
-	.tXSR = 140,
-	.tXPx2 = 15,
-	.tRFCab = 130,
-	.tRTPx2 = 15,
-	.tCKE = 3,
-	.tCKESR = 15,
-	.tZQCS = 90,
-	.tZQCL = 360,
-	.tZQINIT = 1000,
-	.tDQSCKMAXx2 = 11,
-	.tRASmax = 70,
-	.tFAW = 50
-};
-
-/*
- * Min tCK values specified by JESD209-2
- * Min tCK specifies the minimum duration of some AC timing parameters in terms
- * of the number of cycles. If the calculated number of cycles based on the
- * absolute time value is less than the min tCK value, min tCK value should
- * be used instead. This typically happens at low frequencies.
- */
-static const struct lpddr2_min_tck min_tck_jedec = {
-	.tRL = 3,
-	.tRP_AB = 3,
-	.tRCD = 3,
-	.tWR = 3,
-	.tRAS_MIN = 3,
-	.tRRD = 2,
-	.tWTR = 2,
-	.tXP = 2,
-	.tRTP = 2,
-	.tCKE = 3,
-	.tCKESR = 3,
-	.tFAW = 8
-};
-
-static const struct lpddr2_ac_timings const*
-			jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
-	&timings_jedec_200_mhz,
-	&timings_jedec_333_mhz,
-	&timings_jedec_400_mhz
-};
-
-static const struct lpddr2_device_timings jedec_default_timings = {
-	.ac_timings = jedec_ac_timings,
-	.min_tck = &min_tck_jedec
-};
-
-void emif_get_device_timings(u32 emif_nr,
-		const struct lpddr2_device_timings **cs0_device_timings,
-		const struct lpddr2_device_timings **cs1_device_timings)
-{
-	/* Assume Identical devices on EMIF1 & EMIF2 */
-	*cs0_device_timings = &jedec_default_timings;
-	*cs1_device_timings = &jedec_default_timings;
-}
-#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
-
 #ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
 const char *get_lpddr2_type(u8 type_id)
 {
@@ -967,7 +850,8 @@ struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
 			struct lpddr2_device_details *lpddr2_dev_details)
 {
 	u32 phy;
-	u32 base = (emif_nr == 1) ? OMAP44XX_EMIF1 : OMAP44XX_EMIF2;
+	u32 base = (emif_nr == 1) ? EMIF1_BASE : EMIF2_BASE;
+
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
 	if (!lpddr2_dev_details)
@@ -996,7 +880,7 @@ static void do_sdram_init(u32 base)
 	debug(">>do_sdram_init() %x\n", base);
 
 	in_sdram = running_from_sdram();
-	emif_nr = (base == OMAP44XX_EMIF1) ? 1 : 2;
+	emif_nr = (base == EMIF1_BASE) ? 1 : 2;
 
 #ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 	emif_get_reg_dump(emif_nr, &regs);
@@ -1063,21 +947,24 @@ static void do_sdram_init(u32 base)
 	debug("<<do_sdram_init() %x\n", base);
 }
 
-static void emif_post_init_config(u32 base)
+void emif_post_init_config(u32 base)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-	u32 omap4_rev = omap_revision();
+	u32 omap_rev = omap_revision();
+
+	if (omap_rev == OMAP5430_ES1_0)
+		return;
 
 	/* reset phy on ES2.0 */
-	if (omap4_rev == OMAP4430_ES2_0)
+	if (omap_rev == OMAP4430_ES2_0)
 		emif_reset_phy(base);
 
 	/* Put EMIF back in smart idle on ES1.0 */
-	if (omap4_rev == OMAP4430_ES1_0)
+	if (omap_rev == OMAP4430_ES1_0)
 		writel(0x80000000, &emif->emif_pwr_mgmt_ctrl);
 }
 
-static void dmm_init(u32 base)
+void dmm_init(u32 base)
 {
 	const struct dmm_lisa_map_regs *lisa_map_regs;
 
@@ -1102,12 +989,12 @@ static void dmm_init(u32 base)
 	if (emif1_size && emif2_size) {
 		mapped_size = min(emif1_size, emif2_size);
 		section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL;
-		section_map |= 0 << OMAP44XX_SDRC_ADDR_SHIFT;
+		section_map |= 0 << EMIF_SDRC_ADDR_SHIFT;
 		/* only MSB */
 		section_map |= (sys_addr >> 24) <<
-				OMAP44XX_SYS_ADDR_SHIFT;
+				EMIF_SYS_ADDR_SHIFT;
 		section_map |= get_dmm_section_size_map(mapped_size * 2)
-				<< OMAP44XX_SYS_SIZE_SHIFT;
+				<< EMIF_SYS_SIZE_SHIFT;
 		lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
 		emif1_size -= mapped_size;
 		emif2_size -= mapped_size;
@@ -1122,22 +1009,22 @@ static void dmm_init(u32 base)
 	if (emif1_size) {
 		section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL;
 		section_map |= get_dmm_section_size_map(emif1_size)
-				<< OMAP44XX_SYS_SIZE_SHIFT;
+				<< EMIF_SYS_SIZE_SHIFT;
 		/* only MSB */
 		section_map |= (mapped_size >> 24) <<
-				OMAP44XX_SDRC_ADDR_SHIFT;
+				EMIF_SDRC_ADDR_SHIFT;
 		/* only MSB */
-		section_map |= (sys_addr >> 24) << OMAP44XX_SYS_ADDR_SHIFT;
+		section_map |= (sys_addr >> 24) << EMIF_SYS_ADDR_SHIFT;
 		section_cnt--;
 	}
 	if (emif2_size) {
 		section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL;
 		section_map |= get_dmm_section_size_map(emif2_size) <<
-				OMAP44XX_SYS_SIZE_SHIFT;
+				EMIF_SYS_SIZE_SHIFT;
 		/* only MSB */
-		section_map |= mapped_size >> 24 << OMAP44XX_SDRC_ADDR_SHIFT;
+		section_map |= mapped_size >> 24 << EMIF_SDRC_ADDR_SHIFT;
 		/* only MSB */
-		section_map |= sys_addr >> 24 << OMAP44XX_SYS_ADDR_SHIFT;
+		section_map |= sys_addr >> 24 << EMIF_SYS_ADDR_SHIFT;
 		section_cnt--;
 	}
 
@@ -1176,7 +1063,7 @@ static void dmm_init(u32 base)
 
 	if (omap_revision() >= OMAP4460_ES1_0) {
 		hw_lisa_map_regs =
-		    (struct dmm_lisa_map_regs *)OMAP44XX_MA_LISA_MAP_BASE;
+		    (struct dmm_lisa_map_regs *)MA_BASE;
 
 		writel(lisa_map_regs->dmm_lisa_map_3,
 			&hw_lisa_map_regs->dmm_lisa_map_3);
@@ -1222,14 +1109,13 @@ void sdram_init(void)
 		bypass_dpll(&prcm->cm_clkmode_dpll_core);
 	}
 
-	do_sdram_init(OMAP44XX_EMIF1);
-	do_sdram_init(OMAP44XX_EMIF2);
+	do_sdram_init(EMIF1_BASE);
+	do_sdram_init(EMIF2_BASE);
 
 	if (!in_sdram) {
-		dmm_init(OMAP44XX_DMM_LISA_MAP_BASE);
-		emif_post_init_config(OMAP44XX_EMIF1);
-		emif_post_init_config(OMAP44XX_EMIF2);
-
+		dmm_init(DMM_BASE);
+		emif_post_init_config(EMIF1_BASE);
+		emif_post_init_config(EMIF2_BASE);
 	}
 
 	/* for the shadow registers to take effect */
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 75740cb..b370d31 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -30,7 +30,7 @@
 #include <common.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/sizes.h>
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -168,19 +168,23 @@ void watchdog_init(void)
 u32 omap_sdram_size(void)
 {
 	u32 section, i, total_size = 0, size, addr;
+
 	for (i = 0; i < 4; i++) {
-		section	= __raw_readl(OMAP44XX_DMM_LISA_MAP_BASE + i*4);
-		addr = section & OMAP44XX_SYS_ADDR_MASK;
+		section	= __raw_readl(DMM_BASE + i*4);
+		addr = section & EMIF_SYS_ADDR_MASK;
 		/* See if the address is valid */
-		if ((addr >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
-		    (addr < OMAP44XX_DRAM_ADDR_SPACE_END)) {
-			size	= ((section & OMAP44XX_SYS_SIZE_MASK) >>
-				   OMAP44XX_SYS_SIZE_SHIFT);
-			size	= 1 << size;
-			size	*= SZ_16M;
+		if ((addr >= DRAM_ADDR_SPACE_START) &&
+		    (addr < DRAM_ADDR_SPACE_END)) {
+			size = ((section & EMIF_SYS_SIZE_MASK) >>
+				   EMIF_SYS_SIZE_SHIFT);
+			size = 1 << size;
+			size *= SZ_16M;
 			total_size += size;
 		}
 	}
+
+	total_size = SZ_16M;
+
 	return total_size;
 }
 
diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
index c7bfa27..83160a2 100644
--- a/arch/arm/cpu/armv7/omap4/Makefile
+++ b/arch/arm/cpu/armv7/omap4/Makefile
@@ -28,6 +28,7 @@ LIB	=  $(obj)lib$(SOC).o
 COBJS	+= sdram_elpida.o
 COBJS	+= hwinit.o
 COBJS	+= clocks.o
+COBJS	+= emif.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c
new file mode 100644
index 0000000..ca4823d
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/emif.c
@@ -0,0 +1,129 @@
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
+u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
+u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
+#endif
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_400_mhz = {
+	.max_freq = 400000000,
+	.RL = 6,
+	.tRPab = 21,
+	.tRCD = 18,
+	.tWR = 15,
+	.tRASmin = 42,
+	.tRRD = 10,
+	.tWTRx2 = 15,
+	.tXSR = 140,
+	.tXPx2 = 15,
+	.tRFCab = 130,
+	.tRTPx2 = 15,
+	.tCKE = 3,
+	.tCKESR = 15,
+	.tZQCS = 90,
+	.tZQCL = 360,
+	.tZQINIT = 1000,
+	.tDQSCKMAXx2 = 11,
+	.tRASmax = 70,
+	.tFAW = 50
+};
+
+/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
+	.max_freq = 200000000,
+	.RL = 3,
+	.tRPab = 21,
+	.tRCD = 18,
+	.tWR = 15,
+	.tRASmin = 42,
+	.tRRD = 10,
+	.tWTRx2 = 20,
+	.tXSR = 140,
+	.tXPx2 = 15,
+	.tRFCab = 130,
+	.tRTPx2 = 15,
+	.tCKE = 3,
+	.tCKESR = 15,
+	.tZQCS = 90,
+	.tZQCL = 360,
+	.tZQINIT = 1000,
+	.tDQSCKMAXx2 = 11,
+	.tRASmax = 70,
+	.tFAW = 50
+};
+
+/*
+ * Min tCK values specified by JESD209-2
+ * Min tCK specifies the minimum duration of some AC timing parameters in terms
+ * of the number of cycles. If the calculated number of cycles based on the
+ * absolute time value is less than the min tCK value, min tCK value should
+ * be used instead. This typically happens at low frequencies.
+ */
+static const struct lpddr2_min_tck min_tck_jedec = {
+	.tRL = 3,
+	.tRP_AB = 3,
+	.tRCD = 3,
+	.tWR = 3,
+	.tRAS_MIN = 3,
+	.tRRD = 2,
+	.tWTR = 2,
+	.tXP = 2,
+	.tRTP = 2,
+	.tCKE = 3,
+	.tCKESR = 3,
+	.tFAW = 8
+};
+
+static const struct lpddr2_ac_timings const*
+			jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
+	&timings_jedec_200_mhz,
+	&timings_jedec_400_mhz
+};
+
+static const struct lpddr2_device_timings jedec_default_timings = {
+	.ac_timings = jedec_ac_timings,
+	.min_tck = &min_tck_jedec
+};
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	/* Assume Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &jedec_default_timings;
+	*cs1_device_timings = &jedec_default_timings;
+}
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
index 78b3cab..52c9b19 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -32,7 +32,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/sizes.h>
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
 #include <asm/arch/gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
index edc5326..a5ec7d3 100644
--- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c
+++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
@@ -26,7 +26,7 @@
  * MA 02111-1307 USA
  */
 
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
 #include <asm/arch/sys_proto.h>
 
 /*
diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/cpu/armv7/omap5/emif.c
new file mode 100644
index 0000000..8019ffe
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/emif.c
@@ -0,0 +1,105 @@
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com> for OMAP4
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
+static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM;
+static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN;
+static u32 *const emif_sizes = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_SIZE;
+#endif
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+/* Base AC Timing values specified by JESD209-2 for 532MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+	.max_freq = 532000000,
+	.RL = 8,
+	.tRPab = 21,
+	.tRCD = 18,
+	.tWR = 15,
+	.tRASmin = 42,
+	.tRRD = 10,
+	.tWTRx2 = 15,
+	.tXSR = 140,
+	.tXPx2 = 15,
+	.tRFCab = 130,
+	.tRTPx2 = 15,
+	.tCKE = 3,
+	.tCKESR = 15,
+	.tZQCS = 90,
+	.tZQCL = 360,
+	.tZQINIT = 1000,
+	.tDQSCKMAXx2 = 11,
+	.tRASmax = 70,
+	.tFAW = 50
+};
+
+/*
+ * Min tCK values specified by JESD209-2
+ * Min tCK specifies the minimum duration of some AC timing parameters in terms
+ * of the number of cycles. If the calculated number of cycles based on the
+ * absolute time value is less than the min tCK value, min tCK value should
+ * be used instead. This typically happens at low frequencies.
+ */
+static const struct lpddr2_min_tck min_tck_jedec = {
+	.tRL = 3,
+	.tRP_AB = 3,
+	.tRCD = 3,
+	.tWR = 3,
+	.tRAS_MIN = 3,
+	.tRRD = 2,
+	.tWTR = 2,
+	.tXP = 2,
+	.tRTP = 2,
+	.tCKE = 3,
+	.tCKESR = 3,
+	.tFAW = 8
+};
+
+static const struct lpddr2_ac_timings const*
+			jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
+	&timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings jedec_default_timings = {
+	.ac_timings = jedec_ac_timings,
+	.min_tck = &min_tck_jedec
+};
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	/* Assume Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &jedec_default_timings;
+	*cs1_device_timings = NULL;
+}
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/arch/arm/cpu/armv7/omap5/sdram_elpida.c b/arch/arm/cpu/armv7/omap5/sdram_elpida.c
new file mode 100644
index 0000000..ad198e6
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/sdram_elpida.c
@@ -0,0 +1,178 @@
+/*
+ * Timing and Organization details of the Elpida parts used in OMAP5
+ * EVM
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ * This file provides details of the LPDDR2 SDRAM parts used on OMAP5
+ * EVM. Since the parts used and geometry are identical for
+ * evm for a given OMAP5 revision, this information is kept
+ * here instead of being in board directory. However the key functions
+ * exported are weakly linked so that they can be over-ridden in the board
+ * directory if there is a OMAP5 board in the future that uses a different
+ * memory device or geometry.
+ *
+ * For any new board with different memory devices over-ride one or more
+ * of the following functions as per the CONFIG flags you intend to enable:
+ * - emif_get_reg_dump()
+ * - emif_get_dmm_regs()
+ * - emif_get_device_details()
+ * - emif_get_device_timings()
+ */
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+const struct emif_regs emif_regs_elpida_532_mhz_1cs = {
+	.sdram_config_init		= 0x80801aB2,
+	.sdram_config			= 0x808022B2,
+	.ref_ctrl			= 0x0000081A,
+	.sdram_tim1			= 0x772F6873,
+	.sdram_tim2			= 0x304A129A,
+	.sdram_tim3			= 0x02F7E45F,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x000B3215,
+	.temp_alert_config		= 0x08000A05,
+	.emif_ddr_phy_ctlr_1_init	= 0x0E38200D,
+	.emif_ddr_phy_ctlr_1		= 0x0E38200D
+};
+
+const struct dmm_lisa_map_regs lisa_map_4G_x_1_x_2 = {
+	.dmm_lisa_map_0 = 0xFF020100,
+	.dmm_lisa_map_1 = 0,
+	.dmm_lisa_map_2 = 0,
+	.dmm_lisa_map_3 = 0x80640300
+};
+
+static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
+{
+	*regs = &emif_regs_elpida_532_mhz_1cs;
+}
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+	__attribute__((weak, alias("emif_get_reg_dump_sdp")));
+
+static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
+						**dmm_lisa_regs)
+{
+	*dmm_lisa_regs = &lisa_map_4G_x_1_x_2;
+}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+	__attribute__((weak, alias("emif_get_dmm_regs_sdp")));
+
+#else
+
+static const struct lpddr2_device_details elpida_4G_S4_details = {
+	.type		= LPDDR2_TYPE_S4,
+	.density	= LPDDR2_DENSITY_4Gb,
+	.io_width	= LPDDR2_IO_WIDTH_32,
+	.manufacturer	= LPDDR2_MANUFACTURER_ELPIDA
+};
+
+static void emif_get_device_details_sdp(u32 emif_nr,
+		struct lpddr2_device_details *cs0_device_details,
+		struct lpddr2_device_details *cs1_device_details)
+{
+	/* EMIF1 & EMIF2 have identical configuration */
+	*cs0_device_details = elpida_4G_S4_details;
+
+	/* Nothing is conected on cs1 */
+	cs1_device_details = NULL;
+}
+
+void emif_get_device_details(u32 emif_nr,
+		struct lpddr2_device_details *cs0_device_details,
+		struct lpddr2_device_details *cs1_device_details)
+	__attribute__((weak, alias("emif_get_device_details_sdp")));
+
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+	.max_freq	= 532000000,
+	.RL		= 8,
+	.tRPab		= 21,
+	.tRCD		= 18,
+	.tWR		= 15,
+	.tRASmin	= 42,
+	.tRRD		= 10,
+	.tWTRx2		= 15,
+	.tXSR		= 140,
+	.tXPx2		= 15,
+	.tRFCab		= 130,
+	.tRTPx2		= 15,
+	.tCKE		= 3,
+	.tCKESR		= 15,
+	.tZQCS		= 90,
+	.tZQCL		= 360,
+	.tZQINIT	= 1000,
+	.tDQSCKMAXx2	= 11,
+	.tRASmax	= 70,
+	.tFAW		= 50
+};
+
+static const struct lpddr2_min_tck min_tck_elpida = {
+	.tRL		= 3,
+	.tRP_AB		= 3,
+	.tRCD		= 3,
+	.tWR		= 3,
+	.tRAS_MIN	= 3,
+	.tRRD		= 2,
+	.tWTR		= 2,
+	.tXP		= 2,
+	.tRTP		= 2,
+	.tCKE		= 3,
+	.tCKESR		= 3,
+	.tFAW		= 8
+};
+
+static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = {
+	&timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings elpida_4G_S4_timings = {
+	.ac_timings	= elpida_ac_timings,
+	.min_tck	= &min_tck_elpida,
+};
+
+void emif_get_device_timings_sdp(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	/* Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &elpida_4G_S4_timings;
+	*cs1_device_timings = NULL;
+}
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+	__attribute__((weak, alias("emif_get_device_timings_sdp")));
+
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/arch/arm/include/asm/arch-omap4/emif.h b/arch/arm/include/asm/arch-omap4/emif.h
deleted file mode 100644
index 3a549ba..0000000
--- a/arch/arm/include/asm/arch-omap4/emif.h
+++ /dev/null
@@ -1,1021 +0,0 @@
-/*
- * OMAP44xx EMIF header
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Aneesh V <aneesh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _EMIF_H_
-#define _EMIF_H_
-#include <asm/types.h>
-#include <common.h>
-
-/* Base address */
-#define OMAP44XX_EMIF1				0x4c000000
-#define OMAP44XX_EMIF2				0x4d000000
-
-/* Registers shifts and masks */
-
-/* EMIF_MOD_ID_REV */
-#define OMAP44XX_REG_SCHEME_SHIFT			30
-#define OMAP44XX_REG_SCHEME_MASK			(0x3 << 30)
-#define OMAP44XX_REG_MODULE_ID_SHIFT			16
-#define OMAP44XX_REG_MODULE_ID_MASK			(0xfff << 16)
-#define OMAP44XX_REG_RTL_VERSION_SHIFT			11
-#define OMAP44XX_REG_RTL_VERSION_MASK			(0x1f << 11)
-#define OMAP44XX_REG_MAJOR_REVISION_SHIFT		8
-#define OMAP44XX_REG_MAJOR_REVISION_MASK		(0x7 << 8)
-#define OMAP44XX_REG_MINOR_REVISION_SHIFT		0
-#define OMAP44XX_REG_MINOR_REVISION_MASK		(0x3f << 0)
-
-/* STATUS */
-#define OMAP44XX_REG_BE_SHIFT				31
-#define OMAP44XX_REG_BE_MASK				(1 << 31)
-#define OMAP44XX_REG_DUAL_CLK_MODE_SHIFT		30
-#define OMAP44XX_REG_DUAL_CLK_MODE_MASK			(1 << 30)
-#define OMAP44XX_REG_FAST_INIT_SHIFT			29
-#define OMAP44XX_REG_FAST_INIT_MASK			(1 << 29)
-#define OMAP44XX_REG_PHY_DLL_READY_SHIFT		2
-#define OMAP44XX_REG_PHY_DLL_READY_MASK			(1 << 2)
-
-/* SDRAM_CONFIG */
-#define OMAP44XX_REG_SDRAM_TYPE_SHIFT			29
-#define OMAP44XX_REG_SDRAM_TYPE_MASK			(0x7 << 29)
-#define OMAP44XX_REG_IBANK_POS_SHIFT			27
-#define OMAP44XX_REG_IBANK_POS_MASK			(0x3 << 27)
-#define OMAP44XX_REG_DDR_TERM_SHIFT			24
-#define OMAP44XX_REG_DDR_TERM_MASK			(0x7 << 24)
-#define OMAP44XX_REG_DDR2_DDQS_SHIFT			23
-#define OMAP44XX_REG_DDR2_DDQS_MASK			(1 << 23)
-#define OMAP44XX_REG_DYN_ODT_SHIFT			21
-#define OMAP44XX_REG_DYN_ODT_MASK			(0x3 << 21)
-#define OMAP44XX_REG_DDR_DISABLE_DLL_SHIFT		20
-#define OMAP44XX_REG_DDR_DISABLE_DLL_MASK		(1 << 20)
-#define OMAP44XX_REG_SDRAM_DRIVE_SHIFT			18
-#define OMAP44XX_REG_SDRAM_DRIVE_MASK			(0x3 << 18)
-#define OMAP44XX_REG_CWL_SHIFT				16
-#define OMAP44XX_REG_CWL_MASK				(0x3 << 16)
-#define OMAP44XX_REG_NARROW_MODE_SHIFT			14
-#define OMAP44XX_REG_NARROW_MODE_MASK			(0x3 << 14)
-#define OMAP44XX_REG_CL_SHIFT				10
-#define OMAP44XX_REG_CL_MASK				(0xf << 10)
-#define OMAP44XX_REG_ROWSIZE_SHIFT			7
-#define OMAP44XX_REG_ROWSIZE_MASK			(0x7 << 7)
-#define OMAP44XX_REG_IBANK_SHIFT			4
-#define OMAP44XX_REG_IBANK_MASK				(0x7 << 4)
-#define OMAP44XX_REG_EBANK_SHIFT			3
-#define OMAP44XX_REG_EBANK_MASK				(1 << 3)
-#define OMAP44XX_REG_PAGESIZE_SHIFT			0
-#define OMAP44XX_REG_PAGESIZE_MASK			(0x7 << 0)
-
-/* SDRAM_CONFIG_2 */
-#define OMAP44XX_REG_CS1NVMEN_SHIFT			30
-#define OMAP44XX_REG_CS1NVMEN_MASK			(1 << 30)
-#define OMAP44XX_REG_EBANK_POS_SHIFT			27
-#define OMAP44XX_REG_EBANK_POS_MASK			(1 << 27)
-#define OMAP44XX_REG_RDBNUM_SHIFT			4
-#define OMAP44XX_REG_RDBNUM_MASK			(0x3 << 4)
-#define OMAP44XX_REG_RDBSIZE_SHIFT			0
-#define OMAP44XX_REG_RDBSIZE_MASK			(0x7 << 0)
-
-/* SDRAM_REF_CTRL */
-#define OMAP44XX_REG_INITREF_DIS_SHIFT			31
-#define OMAP44XX_REG_INITREF_DIS_MASK			(1 << 31)
-#define OMAP44XX_REG_SRT_SHIFT				29
-#define OMAP44XX_REG_SRT_MASK				(1 << 29)
-#define OMAP44XX_REG_ASR_SHIFT				28
-#define OMAP44XX_REG_ASR_MASK				(1 << 28)
-#define OMAP44XX_REG_PASR_SHIFT				24
-#define OMAP44XX_REG_PASR_MASK				(0x7 << 24)
-#define OMAP44XX_REG_REFRESH_RATE_SHIFT			0
-#define OMAP44XX_REG_REFRESH_RATE_MASK			(0xffff << 0)
-
-/* SDRAM_REF_CTRL_SHDW */
-#define OMAP44XX_REG_REFRESH_RATE_SHDW_SHIFT		0
-#define OMAP44XX_REG_REFRESH_RATE_SHDW_MASK		(0xffff << 0)
-
-/* SDRAM_TIM_1 */
-#define OMAP44XX_REG_T_RP_SHIFT				25
-#define OMAP44XX_REG_T_RP_MASK				(0xf << 25)
-#define OMAP44XX_REG_T_RCD_SHIFT			21
-#define OMAP44XX_REG_T_RCD_MASK				(0xf << 21)
-#define OMAP44XX_REG_T_WR_SHIFT				17
-#define OMAP44XX_REG_T_WR_MASK				(0xf << 17)
-#define OMAP44XX_REG_T_RAS_SHIFT			12
-#define OMAP44XX_REG_T_RAS_MASK				(0x1f << 12)
-#define OMAP44XX_REG_T_RC_SHIFT				6
-#define OMAP44XX_REG_T_RC_MASK				(0x3f << 6)
-#define OMAP44XX_REG_T_RRD_SHIFT			3
-#define OMAP44XX_REG_T_RRD_MASK				(0x7 << 3)
-#define OMAP44XX_REG_T_WTR_SHIFT			0
-#define OMAP44XX_REG_T_WTR_MASK				(0x7 << 0)
-
-/* SDRAM_TIM_1_SHDW */
-#define OMAP44XX_REG_T_RP_SHDW_SHIFT			25
-#define OMAP44XX_REG_T_RP_SHDW_MASK			(0xf << 25)
-#define OMAP44XX_REG_T_RCD_SHDW_SHIFT			21
-#define OMAP44XX_REG_T_RCD_SHDW_MASK			(0xf << 21)
-#define OMAP44XX_REG_T_WR_SHDW_SHIFT			17
-#define OMAP44XX_REG_T_WR_SHDW_MASK			(0xf << 17)
-#define OMAP44XX_REG_T_RAS_SHDW_SHIFT			12
-#define OMAP44XX_REG_T_RAS_SHDW_MASK			(0x1f << 12)
-#define OMAP44XX_REG_T_RC_SHDW_SHIFT			6
-#define OMAP44XX_REG_T_RC_SHDW_MASK			(0x3f << 6)
-#define OMAP44XX_REG_T_RRD_SHDW_SHIFT			3
-#define OMAP44XX_REG_T_RRD_SHDW_MASK			(0x7 << 3)
-#define OMAP44XX_REG_T_WTR_SHDW_SHIFT			0
-#define OMAP44XX_REG_T_WTR_SHDW_MASK			(0x7 << 0)
-
-/* SDRAM_TIM_2 */
-#define OMAP44XX_REG_T_XP_SHIFT				28
-#define OMAP44XX_REG_T_XP_MASK				(0x7 << 28)
-#define OMAP44XX_REG_T_ODT_SHIFT			25
-#define OMAP44XX_REG_T_ODT_MASK				(0x7 << 25)
-#define OMAP44XX_REG_T_XSNR_SHIFT			16
-#define OMAP44XX_REG_T_XSNR_MASK			(0x1ff << 16)
-#define OMAP44XX_REG_T_XSRD_SHIFT			6
-#define OMAP44XX_REG_T_XSRD_MASK			(0x3ff << 6)
-#define OMAP44XX_REG_T_RTP_SHIFT			3
-#define OMAP44XX_REG_T_RTP_MASK				(0x7 << 3)
-#define OMAP44XX_REG_T_CKE_SHIFT			0
-#define OMAP44XX_REG_T_CKE_MASK				(0x7 << 0)
-
-/* SDRAM_TIM_2_SHDW */
-#define OMAP44XX_REG_T_XP_SHDW_SHIFT			28
-#define OMAP44XX_REG_T_XP_SHDW_MASK			(0x7 << 28)
-#define OMAP44XX_REG_T_ODT_SHDW_SHIFT			25
-#define OMAP44XX_REG_T_ODT_SHDW_MASK			(0x7 << 25)
-#define OMAP44XX_REG_T_XSNR_SHDW_SHIFT			16
-#define OMAP44XX_REG_T_XSNR_SHDW_MASK			(0x1ff << 16)
-#define OMAP44XX_REG_T_XSRD_SHDW_SHIFT			6
-#define OMAP44XX_REG_T_XSRD_SHDW_MASK			(0x3ff << 6)
-#define OMAP44XX_REG_T_RTP_SHDW_SHIFT			3
-#define OMAP44XX_REG_T_RTP_SHDW_MASK			(0x7 << 3)
-#define OMAP44XX_REG_T_CKE_SHDW_SHIFT			0
-#define OMAP44XX_REG_T_CKE_SHDW_MASK			(0x7 << 0)
-
-/* SDRAM_TIM_3 */
-#define OMAP44XX_REG_T_CKESR_SHIFT			21
-#define OMAP44XX_REG_T_CKESR_MASK			(0x7 << 21)
-#define OMAP44XX_REG_ZQ_ZQCS_SHIFT			15
-#define OMAP44XX_REG_ZQ_ZQCS_MASK			(0x3f << 15)
-#define OMAP44XX_REG_T_TDQSCKMAX_SHIFT			13
-#define OMAP44XX_REG_T_TDQSCKMAX_MASK			(0x3 << 13)
-#define OMAP44XX_REG_T_RFC_SHIFT			4
-#define OMAP44XX_REG_T_RFC_MASK				(0x1ff << 4)
-#define OMAP44XX_REG_T_RAS_MAX_SHIFT			0
-#define OMAP44XX_REG_T_RAS_MAX_MASK			(0xf << 0)
-
-/* SDRAM_TIM_3_SHDW */
-#define OMAP44XX_REG_T_CKESR_SHDW_SHIFT			21
-#define OMAP44XX_REG_T_CKESR_SHDW_MASK			(0x7 << 21)
-#define OMAP44XX_REG_ZQ_ZQCS_SHDW_SHIFT			15
-#define OMAP44XX_REG_ZQ_ZQCS_SHDW_MASK			(0x3f << 15)
-#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_SHIFT		13
-#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_MASK		(0x3 << 13)
-#define OMAP44XX_REG_T_RFC_SHDW_SHIFT			4
-#define OMAP44XX_REG_T_RFC_SHDW_MASK			(0x1ff << 4)
-#define OMAP44XX_REG_T_RAS_MAX_SHDW_SHIFT		0
-#define OMAP44XX_REG_T_RAS_MAX_SHDW_MASK		(0xf << 0)
-
-/* LPDDR2_NVM_TIM */
-#define OMAP44XX_REG_NVM_T_XP_SHIFT			28
-#define OMAP44XX_REG_NVM_T_XP_MASK			(0x7 << 28)
-#define OMAP44XX_REG_NVM_T_WTR_SHIFT			24
-#define OMAP44XX_REG_NVM_T_WTR_MASK			(0x7 << 24)
-#define OMAP44XX_REG_NVM_T_RP_SHIFT			20
-#define OMAP44XX_REG_NVM_T_RP_MASK			(0xf << 20)
-#define OMAP44XX_REG_NVM_T_WRA_SHIFT			16
-#define OMAP44XX_REG_NVM_T_WRA_MASK			(0xf << 16)
-#define OMAP44XX_REG_NVM_T_RRD_SHIFT			8
-#define OMAP44XX_REG_NVM_T_RRD_MASK			(0xff << 8)
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHIFT			0
-#define OMAP44XX_REG_NVM_T_RCDMIN_MASK			(0xff << 0)
-
-/* LPDDR2_NVM_TIM_SHDW */
-#define OMAP44XX_REG_NVM_T_XP_SHDW_SHIFT		28
-#define OMAP44XX_REG_NVM_T_XP_SHDW_MASK			(0x7 << 28)
-#define OMAP44XX_REG_NVM_T_WTR_SHDW_SHIFT		24
-#define OMAP44XX_REG_NVM_T_WTR_SHDW_MASK		(0x7 << 24)
-#define OMAP44XX_REG_NVM_T_RP_SHDW_SHIFT		20
-#define OMAP44XX_REG_NVM_T_RP_SHDW_MASK			(0xf << 20)
-#define OMAP44XX_REG_NVM_T_WRA_SHDW_SHIFT		16
-#define OMAP44XX_REG_NVM_T_WRA_SHDW_MASK		(0xf << 16)
-#define OMAP44XX_REG_NVM_T_RRD_SHDW_SHIFT		8
-#define OMAP44XX_REG_NVM_T_RRD_SHDW_MASK		(0xff << 8)
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_SHIFT		0
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_MASK		(0xff << 0)
-
-/* PWR_MGMT_CTRL */
-#define OMAP44XX_REG_IDLEMODE_SHIFT			30
-#define OMAP44XX_REG_IDLEMODE_MASK			(0x3 << 30)
-#define OMAP44XX_REG_PD_TIM_SHIFT			12
-#define OMAP44XX_REG_PD_TIM_MASK			(0xf << 12)
-#define OMAP44XX_REG_DPD_EN_SHIFT			11
-#define OMAP44XX_REG_DPD_EN_MASK			(1 << 11)
-#define OMAP44XX_REG_LP_MODE_SHIFT			8
-#define OMAP44XX_REG_LP_MODE_MASK			(0x7 << 8)
-#define OMAP44XX_REG_SR_TIM_SHIFT			4
-#define OMAP44XX_REG_SR_TIM_MASK			(0xf << 4)
-#define OMAP44XX_REG_CS_TIM_SHIFT			0
-#define OMAP44XX_REG_CS_TIM_MASK			(0xf << 0)
-
-/* PWR_MGMT_CTRL_SHDW */
-#define OMAP44XX_REG_PD_TIM_SHDW_SHIFT			8
-#define OMAP44XX_REG_PD_TIM_SHDW_MASK			(0xf << 8)
-#define OMAP44XX_REG_SR_TIM_SHDW_SHIFT			4
-#define OMAP44XX_REG_SR_TIM_SHDW_MASK			(0xf << 4)
-#define OMAP44XX_REG_CS_TIM_SHDW_SHIFT			0
-#define OMAP44XX_REG_CS_TIM_SHDW_MASK			(0xf << 0)
-
-/* LPDDR2_MODE_REG_DATA */
-#define OMAP44XX_REG_VALUE_0_SHIFT			0
-#define OMAP44XX_REG_VALUE_0_MASK			(0x7f << 0)
-
-/* LPDDR2_MODE_REG_CFG */
-#define OMAP44XX_REG_CS_SHIFT				31
-#define OMAP44XX_REG_CS_MASK				(1 << 31)
-#define OMAP44XX_REG_REFRESH_EN_SHIFT			30
-#define OMAP44XX_REG_REFRESH_EN_MASK			(1 << 30)
-#define OMAP44XX_REG_ADDRESS_SHIFT			0
-#define OMAP44XX_REG_ADDRESS_MASK			(0xff << 0)
-
-/* OCP_CONFIG */
-#define OMAP44XX_REG_SYS_THRESH_MAX_SHIFT		24
-#define OMAP44XX_REG_SYS_THRESH_MAX_MASK		(0xf << 24)
-#define OMAP44XX_REG_MPU_THRESH_MAX_SHIFT		20
-#define OMAP44XX_REG_MPU_THRESH_MAX_MASK		(0xf << 20)
-#define OMAP44XX_REG_LL_THRESH_MAX_SHIFT		16
-#define OMAP44XX_REG_LL_THRESH_MAX_MASK			(0xf << 16)
-#define OMAP44XX_REG_PR_OLD_COUNT_SHIFT			0
-#define OMAP44XX_REG_PR_OLD_COUNT_MASK			(0xff << 0)
-
-/* OCP_CFG_VAL_1 */
-#define OMAP44XX_REG_SYS_BUS_WIDTH_SHIFT		30
-#define OMAP44XX_REG_SYS_BUS_WIDTH_MASK			(0x3 << 30)
-#define OMAP44XX_REG_LL_BUS_WIDTH_SHIFT			28
-#define OMAP44XX_REG_LL_BUS_WIDTH_MASK			(0x3 << 28)
-#define OMAP44XX_REG_WR_FIFO_DEPTH_SHIFT		8
-#define OMAP44XX_REG_WR_FIFO_DEPTH_MASK			(0xff << 8)
-#define OMAP44XX_REG_CMD_FIFO_DEPTH_SHIFT		0
-#define OMAP44XX_REG_CMD_FIFO_DEPTH_MASK		(0xff << 0)
-
-/* OCP_CFG_VAL_2 */
-#define OMAP44XX_REG_RREG_FIFO_DEPTH_SHIFT		16
-#define OMAP44XX_REG_RREG_FIFO_DEPTH_MASK		(0xff << 16)
-#define OMAP44XX_REG_RSD_FIFO_DEPTH_SHIFT		8
-#define OMAP44XX_REG_RSD_FIFO_DEPTH_MASK		(0xff << 8)
-#define OMAP44XX_REG_RCMD_FIFO_DEPTH_SHIFT		0
-#define OMAP44XX_REG_RCMD_FIFO_DEPTH_MASK		(0xff << 0)
-
-/* IODFT_TLGC */
-#define OMAP44XX_REG_TLEC_SHIFT				16
-#define OMAP44XX_REG_TLEC_MASK				(0xffff << 16)
-#define OMAP44XX_REG_MT_SHIFT				14
-#define OMAP44XX_REG_MT_MASK				(1 << 14)
-#define OMAP44XX_REG_ACT_CAP_EN_SHIFT			13
-#define OMAP44XX_REG_ACT_CAP_EN_MASK			(1 << 13)
-#define OMAP44XX_REG_OPG_LD_SHIFT			12
-#define OMAP44XX_REG_OPG_LD_MASK			(1 << 12)
-#define OMAP44XX_REG_RESET_PHY_SHIFT			10
-#define OMAP44XX_REG_RESET_PHY_MASK			(1 << 10)
-#define OMAP44XX_REG_MMS_SHIFT				8
-#define OMAP44XX_REG_MMS_MASK				(1 << 8)
-#define OMAP44XX_REG_MC_SHIFT				4
-#define OMAP44XX_REG_MC_MASK				(0x3 << 4)
-#define OMAP44XX_REG_PC_SHIFT				1
-#define OMAP44XX_REG_PC_MASK				(0x7 << 1)
-#define OMAP44XX_REG_TM_SHIFT				0
-#define OMAP44XX_REG_TM_MASK				(1 << 0)
-
-/* IODFT_CTRL_MISR_RSLT */
-#define OMAP44XX_REG_DQM_TLMR_SHIFT			16
-#define OMAP44XX_REG_DQM_TLMR_MASK			(0x3ff << 16)
-#define OMAP44XX_REG_CTL_TLMR_SHIFT			0
-#define OMAP44XX_REG_CTL_TLMR_MASK			(0x7ff << 0)
-
-/* IODFT_ADDR_MISR_RSLT */
-#define OMAP44XX_REG_ADDR_TLMR_SHIFT			0
-#define OMAP44XX_REG_ADDR_TLMR_MASK			(0x1fffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_1 */
-#define OMAP44XX_REG_DATA_TLMR_31_0_SHIFT		0
-#define OMAP44XX_REG_DATA_TLMR_31_0_MASK		(0xffffffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_2 */
-#define OMAP44XX_REG_DATA_TLMR_63_32_SHIFT		0
-#define OMAP44XX_REG_DATA_TLMR_63_32_MASK		(0xffffffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_3 */
-#define OMAP44XX_REG_DATA_TLMR_66_64_SHIFT		0
-#define OMAP44XX_REG_DATA_TLMR_66_64_MASK		(0x7 << 0)
-
-/* PERF_CNT_1 */
-#define OMAP44XX_REG_COUNTER1_SHIFT			0
-#define OMAP44XX_REG_COUNTER1_MASK			(0xffffffff << 0)
-
-/* PERF_CNT_2 */
-#define OMAP44XX_REG_COUNTER2_SHIFT			0
-#define OMAP44XX_REG_COUNTER2_MASK			(0xffffffff << 0)
-
-/* PERF_CNT_CFG */
-#define OMAP44XX_REG_CNTR2_MCONNID_EN_SHIFT		31
-#define OMAP44XX_REG_CNTR2_MCONNID_EN_MASK		(1 << 31)
-#define OMAP44XX_REG_CNTR2_REGION_EN_SHIFT		30
-#define OMAP44XX_REG_CNTR2_REGION_EN_MASK		(1 << 30)
-#define OMAP44XX_REG_CNTR2_CFG_SHIFT			16
-#define OMAP44XX_REG_CNTR2_CFG_MASK			(0xf << 16)
-#define OMAP44XX_REG_CNTR1_MCONNID_EN_SHIFT		15
-#define OMAP44XX_REG_CNTR1_MCONNID_EN_MASK		(1 << 15)
-#define OMAP44XX_REG_CNTR1_REGION_EN_SHIFT		14
-#define OMAP44XX_REG_CNTR1_REGION_EN_MASK		(1 << 14)
-#define OMAP44XX_REG_CNTR1_CFG_SHIFT			0
-#define OMAP44XX_REG_CNTR1_CFG_MASK			(0xf << 0)
-
-/* PERF_CNT_SEL */
-#define OMAP44XX_REG_MCONNID2_SHIFT			24
-#define OMAP44XX_REG_MCONNID2_MASK			(0xff << 24)
-#define OMAP44XX_REG_REGION_SEL2_SHIFT			16
-#define OMAP44XX_REG_REGION_SEL2_MASK			(0x3 << 16)
-#define OMAP44XX_REG_MCONNID1_SHIFT			8
-#define OMAP44XX_REG_MCONNID1_MASK			(0xff << 8)
-#define OMAP44XX_REG_REGION_SEL1_SHIFT			0
-#define OMAP44XX_REG_REGION_SEL1_MASK			(0x3 << 0)
-
-/* PERF_CNT_TIM */
-#define OMAP44XX_REG_TOTAL_TIME_SHIFT			0
-#define OMAP44XX_REG_TOTAL_TIME_MASK			(0xffffffff << 0)
-
-/* READ_IDLE_CTRL */
-#define OMAP44XX_REG_READ_IDLE_LEN_SHIFT		16
-#define OMAP44XX_REG_READ_IDLE_LEN_MASK			(0xf << 16)
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT		0
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_MASK		(0x1ff << 0)
-
-/* READ_IDLE_CTRL_SHDW */
-#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_SHIFT		16
-#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_MASK		(0xf << 16)
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_SHIFT	0
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_MASK	(0x1ff << 0)
-
-/* IRQ_EOI */
-#define OMAP44XX_REG_EOI_SHIFT				0
-#define OMAP44XX_REG_EOI_MASK				(1 << 0)
-
-/* IRQSTATUS_RAW_SYS */
-#define OMAP44XX_REG_DNV_SYS_SHIFT			2
-#define OMAP44XX_REG_DNV_SYS_MASK			(1 << 2)
-#define OMAP44XX_REG_TA_SYS_SHIFT			1
-#define OMAP44XX_REG_TA_SYS_MASK			(1 << 1)
-#define OMAP44XX_REG_ERR_SYS_SHIFT			0
-#define OMAP44XX_REG_ERR_SYS_MASK			(1 << 0)
-
-/* IRQSTATUS_RAW_LL */
-#define OMAP44XX_REG_DNV_LL_SHIFT			2
-#define OMAP44XX_REG_DNV_LL_MASK			(1 << 2)
-#define OMAP44XX_REG_TA_LL_SHIFT			1
-#define OMAP44XX_REG_TA_LL_MASK				(1 << 1)
-#define OMAP44XX_REG_ERR_LL_SHIFT			0
-#define OMAP44XX_REG_ERR_LL_MASK			(1 << 0)
-
-/* IRQSTATUS_SYS */
-
-/* IRQSTATUS_LL */
-
-/* IRQENABLE_SET_SYS */
-#define OMAP44XX_REG_EN_DNV_SYS_SHIFT			2
-#define OMAP44XX_REG_EN_DNV_SYS_MASK			(1 << 2)
-#define OMAP44XX_REG_EN_TA_SYS_SHIFT			1
-#define OMAP44XX_REG_EN_TA_SYS_MASK			(1 << 1)
-#define OMAP44XX_REG_EN_ERR_SYS_SHIFT			0
-#define OMAP44XX_REG_EN_ERR_SYS_MASK			(1 << 0)
-
-/* IRQENABLE_SET_LL */
-#define OMAP44XX_REG_EN_DNV_LL_SHIFT			2
-#define OMAP44XX_REG_EN_DNV_LL_MASK			(1 << 2)
-#define OMAP44XX_REG_EN_TA_LL_SHIFT			1
-#define OMAP44XX_REG_EN_TA_LL_MASK			(1 << 1)
-#define OMAP44XX_REG_EN_ERR_LL_SHIFT			0
-#define OMAP44XX_REG_EN_ERR_LL_MASK			(1 << 0)
-
-/* IRQENABLE_CLR_SYS */
-
-/* IRQENABLE_CLR_LL */
-
-/* ZQ_CONFIG */
-#define OMAP44XX_REG_ZQ_CS1EN_SHIFT			31
-#define OMAP44XX_REG_ZQ_CS1EN_MASK			(1 << 31)
-#define OMAP44XX_REG_ZQ_CS0EN_SHIFT			30
-#define OMAP44XX_REG_ZQ_CS0EN_MASK			(1 << 30)
-#define OMAP44XX_REG_ZQ_DUALCALEN_SHIFT			29
-#define OMAP44XX_REG_ZQ_DUALCALEN_MASK			(1 << 29)
-#define OMAP44XX_REG_ZQ_SFEXITEN_SHIFT			28
-#define OMAP44XX_REG_ZQ_SFEXITEN_MASK			(1 << 28)
-#define OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT		18
-#define OMAP44XX_REG_ZQ_ZQINIT_MULT_MASK		(0x3 << 18)
-#define OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT			16
-#define OMAP44XX_REG_ZQ_ZQCL_MULT_MASK			(0x3 << 16)
-#define OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT		0
-#define OMAP44XX_REG_ZQ_REFINTERVAL_MASK		(0xffff << 0)
-
-/* TEMP_ALERT_CONFIG */
-#define OMAP44XX_REG_TA_CS1EN_SHIFT			31
-#define OMAP44XX_REG_TA_CS1EN_MASK			(1 << 31)
-#define OMAP44XX_REG_TA_CS0EN_SHIFT			30
-#define OMAP44XX_REG_TA_CS0EN_MASK			(1 << 30)
-#define OMAP44XX_REG_TA_SFEXITEN_SHIFT			28
-#define OMAP44XX_REG_TA_SFEXITEN_MASK			(1 << 28)
-#define OMAP44XX_REG_TA_DEVWDT_SHIFT			26
-#define OMAP44XX_REG_TA_DEVWDT_MASK			(0x3 << 26)
-#define OMAP44XX_REG_TA_DEVCNT_SHIFT			24
-#define OMAP44XX_REG_TA_DEVCNT_MASK			(0x3 << 24)
-#define OMAP44XX_REG_TA_REFINTERVAL_SHIFT		0
-#define OMAP44XX_REG_TA_REFINTERVAL_MASK		(0x3fffff << 0)
-
-/* OCP_ERR_LOG */
-#define OMAP44XX_REG_MADDRSPACE_SHIFT			14
-#define OMAP44XX_REG_MADDRSPACE_MASK			(0x3 << 14)
-#define OMAP44XX_REG_MBURSTSEQ_SHIFT			11
-#define OMAP44XX_REG_MBURSTSEQ_MASK			(0x7 << 11)
-#define OMAP44XX_REG_MCMD_SHIFT				8
-#define OMAP44XX_REG_MCMD_MASK				(0x7 << 8)
-#define OMAP44XX_REG_MCONNID_SHIFT			0
-#define OMAP44XX_REG_MCONNID_MASK			(0xff << 0)
-
-/* DDR_PHY_CTRL_1 */
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHIFT		4
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_MASK		(0xfffffff << 4)
-#define OMAP44XX_REG_READ_LATENCY_SHIFT			0
-#define OMAP44XX_REG_READ_LATENCY_MASK			(0xf << 0)
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT		4
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_MASK		(0xFF << 4)
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT	12
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK	(0xFFFFF << 12)
-
-/* DDR_PHY_CTRL_1_SHDW */
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_SHIFT		4
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_MASK		(0xfffffff << 4)
-#define OMAP44XX_REG_READ_LATENCY_SHDW_SHIFT		0
-#define OMAP44XX_REG_READ_LATENCY_SHDW_MASK		(0xf << 0)
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT	4
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK	(0xFF << 4)
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK	(0xFFFFF << 12)
-
-/* DDR_PHY_CTRL_2 */
-#define OMAP44XX_REG_DDR_PHY_CTRL_2_SHIFT		0
-#define OMAP44XX_REG_DDR_PHY_CTRL_2_MASK		(0xffffffff << 0)
-
-/* DMM */
-#define OMAP44XX_DMM_LISA_MAP_BASE	0x4E000040
-
-/* Memory Adapter (4460 onwards) */
-#define OMAP44XX_MA_LISA_MAP_BASE		0x482AF040
-
-/* DMM_LISA_MAP */
-#define OMAP44XX_SYS_ADDR_SHIFT		24
-#define OMAP44XX_SYS_ADDR_MASK		(0xff << 24)
-#define OMAP44XX_SYS_SIZE_SHIFT		20
-#define OMAP44XX_SYS_SIZE_MASK		(0x7 << 20)
-#define OMAP44XX_SDRC_INTL_SHIFT	18
-#define OMAP44XX_SDRC_INTL_MASK		(0x3 << 18)
-#define OMAP44XX_SDRC_ADDRSPC_SHIFT	16
-#define OMAP44XX_SDRC_ADDRSPC_MASK	(0x3 << 16)
-#define OMAP44XX_SDRC_MAP_SHIFT		8
-#define OMAP44XX_SDRC_MAP_MASK		(0x3 << 8)
-#define OMAP44XX_SDRC_ADDR_SHIFT	0
-#define OMAP44XX_SDRC_ADDR_MASK		(0xff << 0)
-
-/* DMM_LISA_MAP fields */
-#define DMM_SDRC_MAP_UNMAPPED		0
-#define DMM_SDRC_MAP_EMIF1_ONLY		1
-#define DMM_SDRC_MAP_EMIF2_ONLY		2
-#define DMM_SDRC_MAP_EMIF1_AND_EMIF2	3
-
-#define DMM_SDRC_INTL_NONE		0
-#define DMM_SDRC_INTL_128B		1
-#define DMM_SDRC_INTL_256B		2
-#define DMM_SDRC_INTL_512		3
-
-#define DMM_SDRC_ADDR_SPC_SDRAM		0
-#define DMM_SDRC_ADDR_SPC_NVM		1
-#define DMM_SDRC_ADDR_SPC_INVALID	2
-
-#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL		(\
-	(DMM_SDRC_MAP_EMIF1_AND_EMIF2 << OMAP44XX_SDRC_MAP_SHIFT) |\
-	(DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT) |\
-	(DMM_SDRC_INTL_128B << OMAP44XX_SDRC_INTL_SHIFT) |\
-	(CONFIG_SYS_SDRAM_BASE << OMAP44XX_SYS_ADDR_SHIFT))
-
-#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL	(\
-	(DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
-	(DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
-	(DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT))
-
-#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL	(\
-	(DMM_SDRC_MAP_EMIF2_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
-	(DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
-	(DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT))
-
-/* Trap for invalid TILER PAT entries */
-#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP		(\
-	(0  << OMAP44XX_SDRC_ADDR_SHIFT) |\
-	(DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
-	(DMM_SDRC_ADDR_SPC_INVALID << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
-	(DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT)|\
-	(0xFF << OMAP44XX_SYS_ADDR_SHIFT))
-
-
-/* Reg mapping structure */
-struct emif_reg_struct {
-	u32 emif_mod_id_rev;
-	u32 emif_status;
-	u32 emif_sdram_config;
-	u32 emif_lpddr2_nvm_config;
-	u32 emif_sdram_ref_ctrl;
-	u32 emif_sdram_ref_ctrl_shdw;
-	u32 emif_sdram_tim_1;
-	u32 emif_sdram_tim_1_shdw;
-	u32 emif_sdram_tim_2;
-	u32 emif_sdram_tim_2_shdw;
-	u32 emif_sdram_tim_3;
-	u32 emif_sdram_tim_3_shdw;
-	u32 emif_lpddr2_nvm_tim;
-	u32 emif_lpddr2_nvm_tim_shdw;
-	u32 emif_pwr_mgmt_ctrl;
-	u32 emif_pwr_mgmt_ctrl_shdw;
-	u32 emif_lpddr2_mode_reg_data;
-	u32 padding1[1];
-	u32 emif_lpddr2_mode_reg_data_es2;
-	u32 padding11[1];
-	u32 emif_lpddr2_mode_reg_cfg;
-	u32 emif_l3_config;
-	u32 emif_l3_cfg_val_1;
-	u32 emif_l3_cfg_val_2;
-	u32 emif_iodft_tlgc;
-	u32 padding2[7];
-	u32 emif_perf_cnt_1;
-	u32 emif_perf_cnt_2;
-	u32 emif_perf_cnt_cfg;
-	u32 emif_perf_cnt_sel;
-	u32 emif_perf_cnt_tim;
-	u32 padding3;
-	u32 emif_read_idlectrl;
-	u32 emif_read_idlectrl_shdw;
-	u32 padding4;
-	u32 emif_irqstatus_raw_sys;
-	u32 emif_irqstatus_raw_ll;
-	u32 emif_irqstatus_sys;
-	u32 emif_irqstatus_ll;
-	u32 emif_irqenable_set_sys;
-	u32 emif_irqenable_set_ll;
-	u32 emif_irqenable_clr_sys;
-	u32 emif_irqenable_clr_ll;
-	u32 padding5;
-	u32 emif_zq_config;
-	u32 emif_temp_alert_config;
-	u32 emif_l3_err_log;
-	u32 padding6[4];
-	u32 emif_ddr_phy_ctrl_1;
-	u32 emif_ddr_phy_ctrl_1_shdw;
-	u32 emif_ddr_phy_ctrl_2;
-};
-
-struct dmm_lisa_map_regs {
-	u32 dmm_lisa_map_0;
-	u32 dmm_lisa_map_1;
-	u32 dmm_lisa_map_2;
-	u32 dmm_lisa_map_3;
-};
-
-#define CS0	0
-#define CS1	1
-/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
-#define MAX_LPDDR2_FREQ	400000000	/* 400 MHz */
-
-/*
- * The period of DDR clk is represented as numerator and denominator for
- * better accuracy in integer based calculations. However, if the numerator
- * and denominator are very huge there may be chances of overflow in
- * calculations. So, as a trade-off keep denominator(and consequently
- * numerator) within a limit sacrificing some accuracy - but not much
- * If denominator and numerator are already small (such as at 400 MHz)
- * no adjustment is needed
- */
-#define EMIF_PERIOD_DEN_LIMIT	1000
-/*
- * Maximum number of different frequencies supported by EMIF driver
- * Determines the number of entries in the pointer array for register
- * cache
- */
-#define EMIF_MAX_NUM_FREQUENCIES	6
-/*
- * Indices into the Addressing Table array.
- * One entry each for all the different types of devices with different
- * addressing schemes
- */
-#define ADDR_TABLE_INDEX64M	0
-#define ADDR_TABLE_INDEX128M	1
-#define ADDR_TABLE_INDEX256M	2
-#define ADDR_TABLE_INDEX512M	3
-#define ADDR_TABLE_INDEX1GS4	4
-#define ADDR_TABLE_INDEX2GS4	5
-#define ADDR_TABLE_INDEX4G	6
-#define ADDR_TABLE_INDEX8G	7
-#define ADDR_TABLE_INDEX1GS2	8
-#define ADDR_TABLE_INDEX2GS2	9
-#define ADDR_TABLE_INDEXMAX	10
-
-/* Number of Row bits */
-#define ROW_9  0
-#define ROW_10 1
-#define ROW_11 2
-#define ROW_12 3
-#define ROW_13 4
-#define ROW_14 5
-#define ROW_15 6
-#define ROW_16 7
-
-/* Number of Column bits */
-#define COL_8   0
-#define COL_9   1
-#define COL_10  2
-#define COL_11  3
-#define COL_7   4 /*Not supported by OMAP included for completeness */
-
-/* Number of Banks*/
-#define BANKS1 0
-#define BANKS2 1
-#define BANKS4 2
-#define BANKS8 3
-
-/* Refresh rate in micro seconds x 10 */
-#define T_REFI_15_6	156
-#define T_REFI_7_8	78
-#define T_REFI_3_9	39
-
-#define EBANK_CS1_DIS	0
-#define EBANK_CS1_EN	1
-
-/* Read Latency used by the device at reset */
-#define RL_BOOT		3
-/* Read Latency for the highest frequency you want to use */
-#define RL_FINAL	6
-
-/* Interleaving policies at EMIF level- between banks and Chip Selects */
-#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING	0
-#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING	3
-
-/*
- * Interleaving policy to be used
- * Currently set to MAX interleaving for better performance
- */
-#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING
-
-/* State of the core voltage:
- * This is important for some parameters such as read idle control and
- * ZQ calibration timings. Timings are much stricter when voltage ramp
- * is happening compared to when the voltage is stable.
- * We need to calculate two sets of values for these parameters and use
- * them accordingly
- */
-#define LPDDR2_VOLTAGE_STABLE	0
-#define LPDDR2_VOLTAGE_RAMPING	1
-
-/* Length of the forced read idle period in terms of cycles */
-#define EMIF_REG_READ_IDLE_LEN_VAL	5
-
-/* Interval between forced 'read idles' */
-/* To be used when voltage is changed for DPS/DVFS - 1us */
-#define READ_IDLE_INTERVAL_DVFS		(1*1000)
-/*
- * To be used when voltage is not scaled except by Smart Reflex
- * 50us - or maximum value will do
- */
-#define READ_IDLE_INTERVAL_NORMAL	(50*1000)
-
-
-/*
- * Unless voltage is changing due to DVFS one ZQCS command every 50ms should
- * be enough. This shoule be enough also in the case when voltage is changing
- * due to smart-reflex.
- */
-#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US	(50*1000)
-/*
- * If voltage is changing due to DVFS ZQCS should be performed more
- * often(every 50us)
- */
-#define EMIF_ZQCS_INTERVAL_DVFS_IN_US	50
-
-/* The interval between ZQCL commands as a multiple of ZQCS interval */
-#define REG_ZQ_ZQCL_MULT		4
-/* The interval between ZQINIT commands as a multiple of ZQCL interval */
-#define REG_ZQ_ZQINIT_MULT		3
-/* Enable ZQ Calibration on exiting Self-refresh */
-#define REG_ZQ_SFEXITEN_ENABLE		1
-/*
- * ZQ Calibration simultaneously on both chip-selects:
- * Needs one calibration resistor per CS
- * None of the boards that we know of have this capability
- * So disabled by default
- */
-#define REG_ZQ_DUALCALEN_DISABLE	0
-/*
- * Enable ZQ Calibration by default on CS0. If we are asked to program
- * the EMIF there will be something connected to CS0 for sure
- */
-#define REG_ZQ_CS0EN_ENABLE		1
-
-/* EMIF_PWR_MGMT_CTRL register */
-/* Low power modes */
-#define LP_MODE_DISABLE		0
-#define LP_MODE_CLOCK_STOP	1
-#define LP_MODE_SELF_REFRESH	2
-#define LP_MODE_PWR_DN		3
-
-/* REG_DPD_EN */
-#define DPD_DISABLE	0
-#define DPD_ENABLE	1
-
-/* Maximum delay before Low Power Modes */
-#define REG_CS_TIM		0xF
-#define REG_SR_TIM		0xF
-#define REG_PD_TIM		0xF
-
-/* EMIF_PWR_MGMT_CTRL register */
-#define EMIF_PWR_MGMT_CTRL (\
-	((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHIFT) & OMAP44XX_REG_CS_TIM_MASK)|\
-	((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHIFT) & OMAP44XX_REG_SR_TIM_MASK)|\
-	((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\
-	((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\
-	((LP_MODE_DISABLE << OMAP44XX_REG_LP_MODE_SHIFT)\
-			& OMAP44XX_REG_LP_MODE_MASK) |\
-	((DPD_DISABLE << OMAP44XX_REG_DPD_EN_SHIFT)\
-			& OMAP44XX_REG_DPD_EN_MASK))\
-
-#define EMIF_PWR_MGMT_CTRL_SHDW (\
-	((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHDW_SHIFT)\
-			& OMAP44XX_REG_CS_TIM_SHDW_MASK) |\
-	((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHDW_SHIFT)\
-			& OMAP44XX_REG_SR_TIM_SHDW_MASK) |\
-	((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\
-			& OMAP44XX_REG_PD_TIM_SHDW_MASK) |\
-	((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\
-			& OMAP44XX_REG_PD_TIM_SHDW_MASK))
-
-/* EMIF_L3_CONFIG register value */
-#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0	0x0A0000FF
-#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0	0x0A300000
-/*
- * Value of bits 12:31 of DDR_PHY_CTRL_1 register:
- * All these fields have magic values dependent on frequency and
- * determined by PHY and DLL integration with EMIF. Setting the magic
- * values suggested by hw team.
- */
-#define EMIF_DDR_PHY_CTRL_1_BASE_VAL			0x049FF
-#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ			0x41
-#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ			0x80
-#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS	0xFF
-
-/*
-* MR1 value:
-* Burst length	: 8
-* Burst type	: sequential
-* Wrap		: enabled
-* nWR		: 3(default). EMIF does not do pre-charge.
-*		: So nWR is don't care
-*/
-#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3	0x23
-
-/* MR2 */
-#define MR2_RL3_WL1			1
-#define MR2_RL4_WL2			2
-#define MR2_RL5_WL2			3
-#define MR2_RL6_WL3			4
-
-/* MR10: ZQ calibration codes */
-#define MR10_ZQ_ZQCS		0x56
-#define MR10_ZQ_ZQCL		0xAB
-#define MR10_ZQ_ZQINIT		0xFF
-#define MR10_ZQ_ZQRESET		0xC3
-
-/* TEMP_ALERT_CONFIG */
-#define TEMP_ALERT_POLL_INTERVAL_MS	360 /* for temp gradient - 5 C/s */
-#define TEMP_ALERT_CONFIG_DEVCT_1	0
-#define TEMP_ALERT_CONFIG_DEVWDT_32	2
-
-/* MR16 value: refresh full array(no partial array self refresh) */
-#define MR16_REF_FULL_ARRAY	0
-
-/*
- * Maximum number of entries we keep in our array of timing tables
- * We need not keep all the speed bins supported by the device
- * We need to keep timing tables for only the speed bins that we
- * are interested in
- */
-#define MAX_NUM_SPEEDBINS	4
-
-/* LPDDR2 Densities */
-#define LPDDR2_DENSITY_64Mb	0
-#define LPDDR2_DENSITY_128Mb	1
-#define LPDDR2_DENSITY_256Mb	2
-#define LPDDR2_DENSITY_512Mb	3
-#define LPDDR2_DENSITY_1Gb	4
-#define LPDDR2_DENSITY_2Gb	5
-#define LPDDR2_DENSITY_4Gb	6
-#define LPDDR2_DENSITY_8Gb	7
-#define LPDDR2_DENSITY_16Gb	8
-#define LPDDR2_DENSITY_32Gb	9
-
-/* LPDDR2 type */
-#define	LPDDR2_TYPE_S4	0
-#define	LPDDR2_TYPE_S2	1
-#define	LPDDR2_TYPE_NVM	2
-
-/* LPDDR2 IO width */
-#define	LPDDR2_IO_WIDTH_32	0
-#define	LPDDR2_IO_WIDTH_16	1
-#define	LPDDR2_IO_WIDTH_8	2
-
-/* Mode register numbers */
-#define LPDDR2_MR0	0
-#define LPDDR2_MR1	1
-#define LPDDR2_MR2	2
-#define LPDDR2_MR3	3
-#define LPDDR2_MR4	4
-#define LPDDR2_MR5	5
-#define LPDDR2_MR6	6
-#define LPDDR2_MR7	7
-#define LPDDR2_MR8	8
-#define LPDDR2_MR9	9
-#define LPDDR2_MR10	10
-#define LPDDR2_MR11	11
-#define LPDDR2_MR16	16
-#define LPDDR2_MR17	17
-#define LPDDR2_MR18	18
-
-/* MR0 */
-#define LPDDR2_MR0_DAI_SHIFT	0
-#define LPDDR2_MR0_DAI_MASK	1
-#define LPDDR2_MR0_DI_SHIFT	1
-#define LPDDR2_MR0_DI_MASK	(1 << 1)
-#define LPDDR2_MR0_DNVI_SHIFT	2
-#define LPDDR2_MR0_DNVI_MASK	(1 << 2)
-
-/* MR4 */
-#define MR4_SDRAM_REF_RATE_SHIFT	0
-#define MR4_SDRAM_REF_RATE_MASK		7
-#define MR4_TUF_SHIFT			7
-#define MR4_TUF_MASK			(1 << 7)
-
-/* MR4 SDRAM Refresh Rate field values */
-#define SDRAM_TEMP_LESS_LOW_SHUTDOWN			0x0
-#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS		0x1
-#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS		0x2
-#define SDRAM_TEMP_NOMINAL				0x3
-#define SDRAM_TEMP_RESERVED_4				0x4
-#define SDRAM_TEMP_HIGH_DERATE_REFRESH			0x5
-#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS	0x6
-#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN			0x7
-
-#define LPDDR2_MANUFACTURER_SAMSUNG	1
-#define LPDDR2_MANUFACTURER_QIMONDA	2
-#define LPDDR2_MANUFACTURER_ELPIDA	3
-#define LPDDR2_MANUFACTURER_ETRON	4
-#define LPDDR2_MANUFACTURER_NANYA	5
-#define LPDDR2_MANUFACTURER_HYNIX	6
-#define LPDDR2_MANUFACTURER_MOSEL	7
-#define LPDDR2_MANUFACTURER_WINBOND	8
-#define LPDDR2_MANUFACTURER_ESMT	9
-#define LPDDR2_MANUFACTURER_SPANSION 11
-#define LPDDR2_MANUFACTURER_SST		12
-#define LPDDR2_MANUFACTURER_ZMOS	13
-#define LPDDR2_MANUFACTURER_INTEL	14
-#define LPDDR2_MANUFACTURER_NUMONYX	254
-#define LPDDR2_MANUFACTURER_MICRON	255
-
-/* MR8 register fields */
-#define MR8_TYPE_SHIFT		0x0
-#define MR8_TYPE_MASK		0x3
-#define MR8_DENSITY_SHIFT	0x2
-#define MR8_DENSITY_MASK	(0xF << 0x2)
-#define MR8_IO_WIDTH_SHIFT	0x6
-#define MR8_IO_WIDTH_MASK	(0x3 << 0x6)
-
-struct lpddr2_addressing {
-	u8	num_banks;
-	u8	t_REFI_us_x10;
-	u8	row_sz[2]; /* One entry each for x32 and x16 */
-	u8	col_sz[2]; /* One entry each for x32 and x16 */
-};
-
-/* Structure for timings from the DDR datasheet */
-struct lpddr2_ac_timings {
-	u32 max_freq;
-	u8 RL;
-	u8 tRPab;
-	u8 tRCD;
-	u8 tWR;
-	u8 tRASmin;
-	u8 tRRD;
-	u8 tWTRx2;
-	u8 tXSR;
-	u8 tXPx2;
-	u8 tRFCab;
-	u8 tRTPx2;
-	u8 tCKE;
-	u8 tCKESR;
-	u8 tZQCS;
-	u32 tZQCL;
-	u32 tZQINIT;
-	u8 tDQSCKMAXx2;
-	u8 tRASmax;
-	u8 tFAW;
-
-};
-
-/*
- * Min tCK values for some of the parameters:
- * If the calculated clock cycles for the respective parameter is
- * less than the corresponding min tCK value, we need to set the min
- * tCK value. This may happen at lower frequencies.
- */
-struct lpddr2_min_tck {
-	u32 tRL;
-	u32 tRP_AB;
-	u32 tRCD;
-	u32 tWR;
-	u32 tRAS_MIN;
-	u32 tRRD;
-	u32 tWTR;
-	u32 tXP;
-	u32 tRTP;
-	u8  tCKE;
-	u32 tCKESR;
-	u32 tFAW;
-};
-
-struct lpddr2_device_details {
-	u8	type;
-	u8	density;
-	u8	io_width;
-	u8	manufacturer;
-};
-
-struct lpddr2_device_timings {
-	const struct lpddr2_ac_timings **ac_timings;
-	const struct lpddr2_min_tck *min_tck;
-};
-
-/* Details of the devices connected to each chip-select of an EMIF instance */
-struct emif_device_details {
-	const struct lpddr2_device_details *cs0_device_details;
-	const struct lpddr2_device_details *cs1_device_details;
-	const struct lpddr2_device_timings *cs0_device_timings;
-	const struct lpddr2_device_timings *cs1_device_timings;
-};
-
-/*
- * Structure containing shadow of important registers in EMIF
- * The calculation function fills in this structure to be later used for
- * initialization and DVFS
- */
-struct emif_regs {
-	u32 freq;
-	u32 sdram_config_init;
-	u32 sdram_config;
-	u32 ref_ctrl;
-	u32 sdram_tim1;
-	u32 sdram_tim2;
-	u32 sdram_tim3;
-	u32 read_idle_ctrl;
-	u32 zq_config;
-	u32 temp_alert_config;
-	u32 emif_ddr_phy_ctlr_1_init;
-	u32 emif_ddr_phy_ctlr_1;
-};
-
-/* assert macros */
-#if defined(DEBUG)
-#define emif_assert(c)	({ if (!(c)) for (;;); })
-#else
-#define emif_assert(c)	({ if (0) hang(); })
-#endif
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs);
-void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs);
-#else
-struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
-			struct lpddr2_device_details *lpddr2_dev_details);
-void emif_get_device_timings(u32 emif_nr,
-		const struct lpddr2_device_timings **cs0_device_timings,
-		const struct lpddr2_device_timings **cs1_device_timings);
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
new file mode 100644
index 0000000..e5c7d2c
--- /dev/null
+++ b/arch/arm/include/asm/emif.h
@@ -0,0 +1,1035 @@
+/*
+ * OMAP44xx EMIF header
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _EMIF_H_
+#define _EMIF_H_
+#include <asm/types.h>
+#include <common.h>
+
+/* Base address */
+#define EMIF1_BASE				0x4c000000
+#define EMIF2_BASE				0x4d000000
+
+/* Registers shifts and masks */
+
+/* EMIF_MOD_ID_REV */
+#define EMIF_REG_SCHEME_SHIFT			30
+#define EMIF_REG_SCHEME_MASK			(0x3 << 30)
+#define EMIF_REG_MODULE_ID_SHIFT			16
+#define EMIF_REG_MODULE_ID_MASK			(0xfff << 16)
+#define EMIF_REG_RTL_VERSION_SHIFT			11
+#define EMIF_REG_RTL_VERSION_MASK			(0x1f << 11)
+#define EMIF_REG_MAJOR_REVISION_SHIFT		8
+#define EMIF_REG_MAJOR_REVISION_MASK		(0x7 << 8)
+#define EMIF_REG_MINOR_REVISION_SHIFT		0
+#define EMIF_REG_MINOR_REVISION_MASK		(0x3f << 0)
+
+/* STATUS */
+#define EMIF_REG_BE_SHIFT				31
+#define EMIF_REG_BE_MASK				(1 << 31)
+#define EMIF_REG_DUAL_CLK_MODE_SHIFT		30
+#define EMIF_REG_DUAL_CLK_MODE_MASK			(1 << 30)
+#define EMIF_REG_FAST_INIT_SHIFT			29
+#define EMIF_REG_FAST_INIT_MASK			(1 << 29)
+#define EMIF_REG_PHY_DLL_READY_SHIFT		2
+#define EMIF_REG_PHY_DLL_READY_MASK			(1 << 2)
+
+/* SDRAM_CONFIG */
+#define EMIF_REG_SDRAM_TYPE_SHIFT			29
+#define EMIF_REG_SDRAM_TYPE_MASK			(0x7 << 29)
+#define EMIF_REG_IBANK_POS_SHIFT			27
+#define EMIF_REG_IBANK_POS_MASK			(0x3 << 27)
+#define EMIF_REG_DDR_TERM_SHIFT			24
+#define EMIF_REG_DDR_TERM_MASK			(0x7 << 24)
+#define EMIF_REG_DDR2_DDQS_SHIFT			23
+#define EMIF_REG_DDR2_DDQS_MASK			(1 << 23)
+#define EMIF_REG_DYN_ODT_SHIFT			21
+#define EMIF_REG_DYN_ODT_MASK			(0x3 << 21)
+#define EMIF_REG_DDR_DISABLE_DLL_SHIFT		20
+#define EMIF_REG_DDR_DISABLE_DLL_MASK		(1 << 20)
+#define EMIF_REG_SDRAM_DRIVE_SHIFT			18
+#define EMIF_REG_SDRAM_DRIVE_MASK			(0x3 << 18)
+#define EMIF_REG_CWL_SHIFT				16
+#define EMIF_REG_CWL_MASK				(0x3 << 16)
+#define EMIF_REG_NARROW_MODE_SHIFT			14
+#define EMIF_REG_NARROW_MODE_MASK			(0x3 << 14)
+#define EMIF_REG_CL_SHIFT				10
+#define EMIF_REG_CL_MASK				(0xf << 10)
+#define EMIF_REG_ROWSIZE_SHIFT			7
+#define EMIF_REG_ROWSIZE_MASK			(0x7 << 7)
+#define EMIF_REG_IBANK_SHIFT			4
+#define EMIF_REG_IBANK_MASK				(0x7 << 4)
+#define EMIF_REG_EBANK_SHIFT			3
+#define EMIF_REG_EBANK_MASK				(1 << 3)
+#define EMIF_REG_PAGESIZE_SHIFT			0
+#define EMIF_REG_PAGESIZE_MASK			(0x7 << 0)
+
+/* SDRAM_CONFIG_2 */
+#define EMIF_REG_CS1NVMEN_SHIFT			30
+#define EMIF_REG_CS1NVMEN_MASK			(1 << 30)
+#define EMIF_REG_EBANK_POS_SHIFT			27
+#define EMIF_REG_EBANK_POS_MASK			(1 << 27)
+#define EMIF_REG_RDBNUM_SHIFT			4
+#define EMIF_REG_RDBNUM_MASK			(0x3 << 4)
+#define EMIF_REG_RDBSIZE_SHIFT			0
+#define EMIF_REG_RDBSIZE_MASK			(0x7 << 0)
+
+/* SDRAM_REF_CTRL */
+#define EMIF_REG_INITREF_DIS_SHIFT			31
+#define EMIF_REG_INITREF_DIS_MASK			(1 << 31)
+#define EMIF_REG_SRT_SHIFT				29
+#define EMIF_REG_SRT_MASK				(1 << 29)
+#define EMIF_REG_ASR_SHIFT				28
+#define EMIF_REG_ASR_MASK				(1 << 28)
+#define EMIF_REG_PASR_SHIFT				24
+#define EMIF_REG_PASR_MASK				(0x7 << 24)
+#define EMIF_REG_REFRESH_RATE_SHIFT			0
+#define EMIF_REG_REFRESH_RATE_MASK			(0xffff << 0)
+
+/* SDRAM_REF_CTRL_SHDW */
+#define EMIF_REG_REFRESH_RATE_SHDW_SHIFT		0
+#define EMIF_REG_REFRESH_RATE_SHDW_MASK		(0xffff << 0)
+
+/* SDRAM_TIM_1 */
+#define EMIF_REG_T_RP_SHIFT				25
+#define EMIF_REG_T_RP_MASK				(0xf << 25)
+#define EMIF_REG_T_RCD_SHIFT			21
+#define EMIF_REG_T_RCD_MASK				(0xf << 21)
+#define EMIF_REG_T_WR_SHIFT				17
+#define EMIF_REG_T_WR_MASK				(0xf << 17)
+#define EMIF_REG_T_RAS_SHIFT			12
+#define EMIF_REG_T_RAS_MASK				(0x1f << 12)
+#define EMIF_REG_T_RC_SHIFT				6
+#define EMIF_REG_T_RC_MASK				(0x3f << 6)
+#define EMIF_REG_T_RRD_SHIFT			3
+#define EMIF_REG_T_RRD_MASK				(0x7 << 3)
+#define EMIF_REG_T_WTR_SHIFT			0
+#define EMIF_REG_T_WTR_MASK				(0x7 << 0)
+
+/* SDRAM_TIM_1_SHDW */
+#define EMIF_REG_T_RP_SHDW_SHIFT			25
+#define EMIF_REG_T_RP_SHDW_MASK			(0xf << 25)
+#define EMIF_REG_T_RCD_SHDW_SHIFT			21
+#define EMIF_REG_T_RCD_SHDW_MASK			(0xf << 21)
+#define EMIF_REG_T_WR_SHDW_SHIFT			17
+#define EMIF_REG_T_WR_SHDW_MASK			(0xf << 17)
+#define EMIF_REG_T_RAS_SHDW_SHIFT			12
+#define EMIF_REG_T_RAS_SHDW_MASK			(0x1f << 12)
+#define EMIF_REG_T_RC_SHDW_SHIFT			6
+#define EMIF_REG_T_RC_SHDW_MASK			(0x3f << 6)
+#define EMIF_REG_T_RRD_SHDW_SHIFT			3
+#define EMIF_REG_T_RRD_SHDW_MASK			(0x7 << 3)
+#define EMIF_REG_T_WTR_SHDW_SHIFT			0
+#define EMIF_REG_T_WTR_SHDW_MASK			(0x7 << 0)
+
+/* SDRAM_TIM_2 */
+#define EMIF_REG_T_XP_SHIFT				28
+#define EMIF_REG_T_XP_MASK				(0x7 << 28)
+#define EMIF_REG_T_ODT_SHIFT			25
+#define EMIF_REG_T_ODT_MASK				(0x7 << 25)
+#define EMIF_REG_T_XSNR_SHIFT			16
+#define EMIF_REG_T_XSNR_MASK			(0x1ff << 16)
+#define EMIF_REG_T_XSRD_SHIFT			6
+#define EMIF_REG_T_XSRD_MASK			(0x3ff << 6)
+#define EMIF_REG_T_RTP_SHIFT			3
+#define EMIF_REG_T_RTP_MASK				(0x7 << 3)
+#define EMIF_REG_T_CKE_SHIFT			0
+#define EMIF_REG_T_CKE_MASK				(0x7 << 0)
+
+/* SDRAM_TIM_2_SHDW */
+#define EMIF_REG_T_XP_SHDW_SHIFT			28
+#define EMIF_REG_T_XP_SHDW_MASK			(0x7 << 28)
+#define EMIF_REG_T_ODT_SHDW_SHIFT			25
+#define EMIF_REG_T_ODT_SHDW_MASK			(0x7 << 25)
+#define EMIF_REG_T_XSNR_SHDW_SHIFT			16
+#define EMIF_REG_T_XSNR_SHDW_MASK			(0x1ff << 16)
+#define EMIF_REG_T_XSRD_SHDW_SHIFT			6
+#define EMIF_REG_T_XSRD_SHDW_MASK			(0x3ff << 6)
+#define EMIF_REG_T_RTP_SHDW_SHIFT			3
+#define EMIF_REG_T_RTP_SHDW_MASK			(0x7 << 3)
+#define EMIF_REG_T_CKE_SHDW_SHIFT			0
+#define EMIF_REG_T_CKE_SHDW_MASK			(0x7 << 0)
+
+/* SDRAM_TIM_3 */
+#define EMIF_REG_T_CKESR_SHIFT			21
+#define EMIF_REG_T_CKESR_MASK			(0x7 << 21)
+#define EMIF_REG_ZQ_ZQCS_SHIFT			15
+#define EMIF_REG_ZQ_ZQCS_MASK			(0x3f << 15)
+#define EMIF_REG_T_TDQSCKMAX_SHIFT			13
+#define EMIF_REG_T_TDQSCKMAX_MASK			(0x3 << 13)
+#define EMIF_REG_T_RFC_SHIFT			4
+#define EMIF_REG_T_RFC_MASK				(0x1ff << 4)
+#define EMIF_REG_T_RAS_MAX_SHIFT			0
+#define EMIF_REG_T_RAS_MAX_MASK			(0xf << 0)
+
+/* SDRAM_TIM_3_SHDW */
+#define EMIF_REG_T_CKESR_SHDW_SHIFT			21
+#define EMIF_REG_T_CKESR_SHDW_MASK			(0x7 << 21)
+#define EMIF_REG_ZQ_ZQCS_SHDW_SHIFT			15
+#define EMIF_REG_ZQ_ZQCS_SHDW_MASK			(0x3f << 15)
+#define EMIF_REG_T_TDQSCKMAX_SHDW_SHIFT		13
+#define EMIF_REG_T_TDQSCKMAX_SHDW_MASK		(0x3 << 13)
+#define EMIF_REG_T_RFC_SHDW_SHIFT			4
+#define EMIF_REG_T_RFC_SHDW_MASK			(0x1ff << 4)
+#define EMIF_REG_T_RAS_MAX_SHDW_SHIFT		0
+#define EMIF_REG_T_RAS_MAX_SHDW_MASK		(0xf << 0)
+
+/* LPDDR2_NVM_TIM */
+#define EMIF_REG_NVM_T_XP_SHIFT			28
+#define EMIF_REG_NVM_T_XP_MASK			(0x7 << 28)
+#define EMIF_REG_NVM_T_WTR_SHIFT			24
+#define EMIF_REG_NVM_T_WTR_MASK			(0x7 << 24)
+#define EMIF_REG_NVM_T_RP_SHIFT			20
+#define EMIF_REG_NVM_T_RP_MASK			(0xf << 20)
+#define EMIF_REG_NVM_T_WRA_SHIFT			16
+#define EMIF_REG_NVM_T_WRA_MASK			(0xf << 16)
+#define EMIF_REG_NVM_T_RRD_SHIFT			8
+#define EMIF_REG_NVM_T_RRD_MASK			(0xff << 8)
+#define EMIF_REG_NVM_T_RCDMIN_SHIFT			0
+#define EMIF_REG_NVM_T_RCDMIN_MASK			(0xff << 0)
+
+/* LPDDR2_NVM_TIM_SHDW */
+#define EMIF_REG_NVM_T_XP_SHDW_SHIFT		28
+#define EMIF_REG_NVM_T_XP_SHDW_MASK			(0x7 << 28)
+#define EMIF_REG_NVM_T_WTR_SHDW_SHIFT		24
+#define EMIF_REG_NVM_T_WTR_SHDW_MASK		(0x7 << 24)
+#define EMIF_REG_NVM_T_RP_SHDW_SHIFT		20
+#define EMIF_REG_NVM_T_RP_SHDW_MASK			(0xf << 20)
+#define EMIF_REG_NVM_T_WRA_SHDW_SHIFT		16
+#define EMIF_REG_NVM_T_WRA_SHDW_MASK		(0xf << 16)
+#define EMIF_REG_NVM_T_RRD_SHDW_SHIFT		8
+#define EMIF_REG_NVM_T_RRD_SHDW_MASK		(0xff << 8)
+#define EMIF_REG_NVM_T_RCDMIN_SHDW_SHIFT		0
+#define EMIF_REG_NVM_T_RCDMIN_SHDW_MASK		(0xff << 0)
+
+/* PWR_MGMT_CTRL */
+#define EMIF_REG_IDLEMODE_SHIFT			30
+#define EMIF_REG_IDLEMODE_MASK			(0x3 << 30)
+#define EMIF_REG_PD_TIM_SHIFT			12
+#define EMIF_REG_PD_TIM_MASK			(0xf << 12)
+#define EMIF_REG_DPD_EN_SHIFT			11
+#define EMIF_REG_DPD_EN_MASK			(1 << 11)
+#define EMIF_REG_LP_MODE_SHIFT			8
+#define EMIF_REG_LP_MODE_MASK			(0x7 << 8)
+#define EMIF_REG_SR_TIM_SHIFT			4
+#define EMIF_REG_SR_TIM_MASK			(0xf << 4)
+#define EMIF_REG_CS_TIM_SHIFT			0
+#define EMIF_REG_CS_TIM_MASK			(0xf << 0)
+
+/* PWR_MGMT_CTRL_SHDW */
+#define EMIF_REG_PD_TIM_SHDW_SHIFT			8
+#define EMIF_REG_PD_TIM_SHDW_MASK			(0xf << 8)
+#define EMIF_REG_SR_TIM_SHDW_SHIFT			4
+#define EMIF_REG_SR_TIM_SHDW_MASK			(0xf << 4)
+#define EMIF_REG_CS_TIM_SHDW_SHIFT			0
+#define EMIF_REG_CS_TIM_SHDW_MASK			(0xf << 0)
+
+/* LPDDR2_MODE_REG_DATA */
+#define EMIF_REG_VALUE_0_SHIFT			0
+#define EMIF_REG_VALUE_0_MASK			(0x7f << 0)
+
+/* LPDDR2_MODE_REG_CFG */
+#define EMIF_REG_CS_SHIFT				31
+#define EMIF_REG_CS_MASK				(1 << 31)
+#define EMIF_REG_REFRESH_EN_SHIFT			30
+#define EMIF_REG_REFRESH_EN_MASK			(1 << 30)
+#define EMIF_REG_ADDRESS_SHIFT			0
+#define EMIF_REG_ADDRESS_MASK			(0xff << 0)
+
+/* OCP_CONFIG */
+#define EMIF_REG_SYS_THRESH_MAX_SHIFT		24
+#define EMIF_REG_SYS_THRESH_MAX_MASK		(0xf << 24)
+#define EMIF_REG_MPU_THRESH_MAX_SHIFT		20
+#define EMIF_REG_MPU_THRESH_MAX_MASK		(0xf << 20)
+#define EMIF_REG_LL_THRESH_MAX_SHIFT		16
+#define EMIF_REG_LL_THRESH_MAX_MASK			(0xf << 16)
+#define EMIF_REG_PR_OLD_COUNT_SHIFT			0
+#define EMIF_REG_PR_OLD_COUNT_MASK			(0xff << 0)
+
+/* OCP_CFG_VAL_1 */
+#define EMIF_REG_SYS_BUS_WIDTH_SHIFT		30
+#define EMIF_REG_SYS_BUS_WIDTH_MASK			(0x3 << 30)
+#define EMIF_REG_LL_BUS_WIDTH_SHIFT			28
+#define EMIF_REG_LL_BUS_WIDTH_MASK			(0x3 << 28)
+#define EMIF_REG_WR_FIFO_DEPTH_SHIFT		8
+#define EMIF_REG_WR_FIFO_DEPTH_MASK			(0xff << 8)
+#define EMIF_REG_CMD_FIFO_DEPTH_SHIFT		0
+#define EMIF_REG_CMD_FIFO_DEPTH_MASK		(0xff << 0)
+
+/* OCP_CFG_VAL_2 */
+#define EMIF_REG_RREG_FIFO_DEPTH_SHIFT		16
+#define EMIF_REG_RREG_FIFO_DEPTH_MASK		(0xff << 16)
+#define EMIF_REG_RSD_FIFO_DEPTH_SHIFT		8
+#define EMIF_REG_RSD_FIFO_DEPTH_MASK		(0xff << 8)
+#define EMIF_REG_RCMD_FIFO_DEPTH_SHIFT		0
+#define EMIF_REG_RCMD_FIFO_DEPTH_MASK		(0xff << 0)
+
+/* IODFT_TLGC */
+#define EMIF_REG_TLEC_SHIFT				16
+#define EMIF_REG_TLEC_MASK				(0xffff << 16)
+#define EMIF_REG_MT_SHIFT				14
+#define EMIF_REG_MT_MASK				(1 << 14)
+#define EMIF_REG_ACT_CAP_EN_SHIFT			13
+#define EMIF_REG_ACT_CAP_EN_MASK			(1 << 13)
+#define EMIF_REG_OPG_LD_SHIFT			12
+#define EMIF_REG_OPG_LD_MASK			(1 << 12)
+#define EMIF_REG_RESET_PHY_SHIFT			10
+#define EMIF_REG_RESET_PHY_MASK			(1 << 10)
+#define EMIF_REG_MMS_SHIFT				8
+#define EMIF_REG_MMS_MASK				(1 << 8)
+#define EMIF_REG_MC_SHIFT				4
+#define EMIF_REG_MC_MASK				(0x3 << 4)
+#define EMIF_REG_PC_SHIFT				1
+#define EMIF_REG_PC_MASK				(0x7 << 1)
+#define EMIF_REG_TM_SHIFT				0
+#define EMIF_REG_TM_MASK				(1 << 0)
+
+/* IODFT_CTRL_MISR_RSLT */
+#define EMIF_REG_DQM_TLMR_SHIFT			16
+#define EMIF_REG_DQM_TLMR_MASK			(0x3ff << 16)
+#define EMIF_REG_CTL_TLMR_SHIFT			0
+#define EMIF_REG_CTL_TLMR_MASK			(0x7ff << 0)
+
+/* IODFT_ADDR_MISR_RSLT */
+#define EMIF_REG_ADDR_TLMR_SHIFT			0
+#define EMIF_REG_ADDR_TLMR_MASK			(0x1fffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_1 */
+#define EMIF_REG_DATA_TLMR_31_0_SHIFT		0
+#define EMIF_REG_DATA_TLMR_31_0_MASK		(0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_2 */
+#define EMIF_REG_DATA_TLMR_63_32_SHIFT		0
+#define EMIF_REG_DATA_TLMR_63_32_MASK		(0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_3 */
+#define EMIF_REG_DATA_TLMR_66_64_SHIFT		0
+#define EMIF_REG_DATA_TLMR_66_64_MASK		(0x7 << 0)
+
+/* PERF_CNT_1 */
+#define EMIF_REG_COUNTER1_SHIFT			0
+#define EMIF_REG_COUNTER1_MASK			(0xffffffff << 0)
+
+/* PERF_CNT_2 */
+#define EMIF_REG_COUNTER2_SHIFT			0
+#define EMIF_REG_COUNTER2_MASK			(0xffffffff << 0)
+
+/* PERF_CNT_CFG */
+#define EMIF_REG_CNTR2_MCONNID_EN_SHIFT		31
+#define EMIF_REG_CNTR2_MCONNID_EN_MASK		(1 << 31)
+#define EMIF_REG_CNTR2_REGION_EN_SHIFT		30
+#define EMIF_REG_CNTR2_REGION_EN_MASK		(1 << 30)
+#define EMIF_REG_CNTR2_CFG_SHIFT			16
+#define EMIF_REG_CNTR2_CFG_MASK			(0xf << 16)
+#define EMIF_REG_CNTR1_MCONNID_EN_SHIFT		15
+#define EMIF_REG_CNTR1_MCONNID_EN_MASK		(1 << 15)
+#define EMIF_REG_CNTR1_REGION_EN_SHIFT		14
+#define EMIF_REG_CNTR1_REGION_EN_MASK		(1 << 14)
+#define EMIF_REG_CNTR1_CFG_SHIFT			0
+#define EMIF_REG_CNTR1_CFG_MASK			(0xf << 0)
+
+/* PERF_CNT_SEL */
+#define EMIF_REG_MCONNID2_SHIFT			24
+#define EMIF_REG_MCONNID2_MASK			(0xff << 24)
+#define EMIF_REG_REGION_SEL2_SHIFT			16
+#define EMIF_REG_REGION_SEL2_MASK			(0x3 << 16)
+#define EMIF_REG_MCONNID1_SHIFT			8
+#define EMIF_REG_MCONNID1_MASK			(0xff << 8)
+#define EMIF_REG_REGION_SEL1_SHIFT			0
+#define EMIF_REG_REGION_SEL1_MASK			(0x3 << 0)
+
+/* PERF_CNT_TIM */
+#define EMIF_REG_TOTAL_TIME_SHIFT			0
+#define EMIF_REG_TOTAL_TIME_MASK			(0xffffffff << 0)
+
+/* READ_IDLE_CTRL */
+#define EMIF_REG_READ_IDLE_LEN_SHIFT		16
+#define EMIF_REG_READ_IDLE_LEN_MASK			(0xf << 16)
+#define EMIF_REG_READ_IDLE_INTERVAL_SHIFT		0
+#define EMIF_REG_READ_IDLE_INTERVAL_MASK		(0x1ff << 0)
+
+/* READ_IDLE_CTRL_SHDW */
+#define EMIF_REG_READ_IDLE_LEN_SHDW_SHIFT		16
+#define EMIF_REG_READ_IDLE_LEN_SHDW_MASK		(0xf << 16)
+#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_SHIFT	0
+#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_MASK	(0x1ff << 0)
+
+/* IRQ_EOI */
+#define EMIF_REG_EOI_SHIFT				0
+#define EMIF_REG_EOI_MASK				(1 << 0)
+
+/* IRQSTATUS_RAW_SYS */
+#define EMIF_REG_DNV_SYS_SHIFT			2
+#define EMIF_REG_DNV_SYS_MASK			(1 << 2)
+#define EMIF_REG_TA_SYS_SHIFT			1
+#define EMIF_REG_TA_SYS_MASK			(1 << 1)
+#define EMIF_REG_ERR_SYS_SHIFT			0
+#define EMIF_REG_ERR_SYS_MASK			(1 << 0)
+
+/* IRQSTATUS_RAW_LL */
+#define EMIF_REG_DNV_LL_SHIFT			2
+#define EMIF_REG_DNV_LL_MASK			(1 << 2)
+#define EMIF_REG_TA_LL_SHIFT			1
+#define EMIF_REG_TA_LL_MASK				(1 << 1)
+#define EMIF_REG_ERR_LL_SHIFT			0
+#define EMIF_REG_ERR_LL_MASK			(1 << 0)
+
+/* IRQSTATUS_SYS */
+
+/* IRQSTATUS_LL */
+
+/* IRQENABLE_SET_SYS */
+#define EMIF_REG_EN_DNV_SYS_SHIFT			2
+#define EMIF_REG_EN_DNV_SYS_MASK			(1 << 2)
+#define EMIF_REG_EN_TA_SYS_SHIFT			1
+#define EMIF_REG_EN_TA_SYS_MASK			(1 << 1)
+#define EMIF_REG_EN_ERR_SYS_SHIFT			0
+#define EMIF_REG_EN_ERR_SYS_MASK			(1 << 0)
+
+/* IRQENABLE_SET_LL */
+#define EMIF_REG_EN_DNV_LL_SHIFT			2
+#define EMIF_REG_EN_DNV_LL_MASK			(1 << 2)
+#define EMIF_REG_EN_TA_LL_SHIFT			1
+#define EMIF_REG_EN_TA_LL_MASK			(1 << 1)
+#define EMIF_REG_EN_ERR_LL_SHIFT			0
+#define EMIF_REG_EN_ERR_LL_MASK			(1 << 0)
+
+/* IRQENABLE_CLR_SYS */
+
+/* IRQENABLE_CLR_LL */
+
+/* ZQ_CONFIG */
+#define EMIF_REG_ZQ_CS1EN_SHIFT			31
+#define EMIF_REG_ZQ_CS1EN_MASK			(1 << 31)
+#define EMIF_REG_ZQ_CS0EN_SHIFT			30
+#define EMIF_REG_ZQ_CS0EN_MASK			(1 << 30)
+#define EMIF_REG_ZQ_DUALCALEN_SHIFT			29
+#define EMIF_REG_ZQ_DUALCALEN_MASK			(1 << 29)
+#define EMIF_REG_ZQ_SFEXITEN_SHIFT			28
+#define EMIF_REG_ZQ_SFEXITEN_MASK			(1 << 28)
+#define EMIF_REG_ZQ_ZQINIT_MULT_SHIFT		18
+#define EMIF_REG_ZQ_ZQINIT_MULT_MASK		(0x3 << 18)
+#define EMIF_REG_ZQ_ZQCL_MULT_SHIFT			16
+#define EMIF_REG_ZQ_ZQCL_MULT_MASK			(0x3 << 16)
+#define EMIF_REG_ZQ_REFINTERVAL_SHIFT		0
+#define EMIF_REG_ZQ_REFINTERVAL_MASK		(0xffff << 0)
+
+/* TEMP_ALERT_CONFIG */
+#define EMIF_REG_TA_CS1EN_SHIFT			31
+#define EMIF_REG_TA_CS1EN_MASK			(1 << 31)
+#define EMIF_REG_TA_CS0EN_SHIFT			30
+#define EMIF_REG_TA_CS0EN_MASK			(1 << 30)
+#define EMIF_REG_TA_SFEXITEN_SHIFT			28
+#define EMIF_REG_TA_SFEXITEN_MASK			(1 << 28)
+#define EMIF_REG_TA_DEVWDT_SHIFT			26
+#define EMIF_REG_TA_DEVWDT_MASK			(0x3 << 26)
+#define EMIF_REG_TA_DEVCNT_SHIFT			24
+#define EMIF_REG_TA_DEVCNT_MASK			(0x3 << 24)
+#define EMIF_REG_TA_REFINTERVAL_SHIFT		0
+#define EMIF_REG_TA_REFINTERVAL_MASK		(0x3fffff << 0)
+
+/* OCP_ERR_LOG */
+#define EMIF_REG_MADDRSPACE_SHIFT			14
+#define EMIF_REG_MADDRSPACE_MASK			(0x3 << 14)
+#define EMIF_REG_MBURSTSEQ_SHIFT			11
+#define EMIF_REG_MBURSTSEQ_MASK			(0x7 << 11)
+#define EMIF_REG_MCMD_SHIFT				8
+#define EMIF_REG_MCMD_MASK				(0x7 << 8)
+#define EMIF_REG_MCONNID_SHIFT			0
+#define EMIF_REG_MCONNID_MASK			(0xff << 0)
+
+/* DDR_PHY_CTRL_1 */
+#define EMIF_REG_DDR_PHY_CTRL_1_SHIFT		4
+#define EMIF_REG_DDR_PHY_CTRL_1_MASK		(0xfffffff << 4)
+#define EMIF_REG_READ_LATENCY_SHIFT			0
+#define EMIF_REG_READ_LATENCY_MASK			(0xf << 0)
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT		4
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_MASK		(0xFF << 4)
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT	12
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK	(0xFFFFF << 12)
+
+/* DDR_PHY_CTRL_1_SHDW */
+#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_SHIFT		4
+#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_MASK		(0xfffffff << 4)
+#define EMIF_REG_READ_LATENCY_SHDW_SHIFT		0
+#define EMIF_REG_READ_LATENCY_SHDW_MASK		(0xf << 0)
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT	4
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK	(0xFF << 4)
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK	(0xFFFFF << 12)
+
+/* DDR_PHY_CTRL_2 */
+#define EMIF_REG_DDR_PHY_CTRL_2_SHIFT		0
+#define EMIF_REG_DDR_PHY_CTRL_2_MASK		(0xffffffff << 0)
+
+/* DMM */
+#define DMM_BASE			0x4E000040
+
+/* Memory Adapter */
+#define MA_BASE				0x482AF040
+
+/* DMM_LISA_MAP */
+#define EMIF_SYS_ADDR_SHIFT		24
+#define EMIF_SYS_ADDR_MASK		(0xff << 24)
+#define EMIF_SYS_SIZE_SHIFT		20
+#define EMIF_SYS_SIZE_MASK		(0x7 << 20)
+#define EMIF_SDRC_INTL_SHIFT	18
+#define EMIF_SDRC_INTL_MASK		(0x3 << 18)
+#define EMIF_SDRC_ADDRSPC_SHIFT	16
+#define EMIF_SDRC_ADDRSPC_MASK	(0x3 << 16)
+#define EMIF_SDRC_MAP_SHIFT		8
+#define EMIF_SDRC_MAP_MASK		(0x3 << 8)
+#define EMIF_SDRC_ADDR_SHIFT	0
+#define EMIF_SDRC_ADDR_MASK		(0xff << 0)
+
+/* DMM_LISA_MAP fields */
+#define DMM_SDRC_MAP_UNMAPPED		0
+#define DMM_SDRC_MAP_EMIF1_ONLY		1
+#define DMM_SDRC_MAP_EMIF2_ONLY		2
+#define DMM_SDRC_MAP_EMIF1_AND_EMIF2	3
+
+#define DMM_SDRC_INTL_NONE		0
+#define DMM_SDRC_INTL_128B		1
+#define DMM_SDRC_INTL_256B		2
+#define DMM_SDRC_INTL_512		3
+
+#define DMM_SDRC_ADDR_SPC_SDRAM		0
+#define DMM_SDRC_ADDR_SPC_NVM		1
+#define DMM_SDRC_ADDR_SPC_INVALID	2
+
+#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL		(\
+	(DMM_SDRC_MAP_EMIF1_AND_EMIF2 << EMIF_SDRC_MAP_SHIFT) |\
+	(DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT) |\
+	(DMM_SDRC_INTL_128B << EMIF_SDRC_INTL_SHIFT) |\
+	(CONFIG_SYS_SDRAM_BASE << EMIF_SYS_ADDR_SHIFT))
+
+#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL	(\
+	(DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+	(DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\
+	(DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT))
+
+#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL	(\
+	(DMM_SDRC_MAP_EMIF2_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+	(DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\
+	(DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT))
+
+/* Trap for invalid TILER PAT entries */
+#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP		(\
+	(0  << EMIF_SDRC_ADDR_SHIFT) |\
+	(DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+	(DMM_SDRC_ADDR_SPC_INVALID << EMIF_SDRC_ADDRSPC_SHIFT)|\
+	(DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT)|\
+	(0xFF << EMIF_SYS_ADDR_SHIFT))
+
+
+/* Reg mapping structure */
+struct emif_reg_struct {
+	u32 emif_mod_id_rev;
+	u32 emif_status;
+	u32 emif_sdram_config;
+	u32 emif_lpddr2_nvm_config;
+	u32 emif_sdram_ref_ctrl;
+	u32 emif_sdram_ref_ctrl_shdw;
+	u32 emif_sdram_tim_1;
+	u32 emif_sdram_tim_1_shdw;
+	u32 emif_sdram_tim_2;
+	u32 emif_sdram_tim_2_shdw;
+	u32 emif_sdram_tim_3;
+	u32 emif_sdram_tim_3_shdw;
+	u32 emif_lpddr2_nvm_tim;
+	u32 emif_lpddr2_nvm_tim_shdw;
+	u32 emif_pwr_mgmt_ctrl;
+	u32 emif_pwr_mgmt_ctrl_shdw;
+	u32 emif_lpddr2_mode_reg_data;
+	u32 padding1[1];
+	u32 emif_lpddr2_mode_reg_data_es2;
+	u32 padding11[1];
+	u32 emif_lpddr2_mode_reg_cfg;
+	u32 emif_l3_config;
+	u32 emif_l3_cfg_val_1;
+	u32 emif_l3_cfg_val_2;
+	u32 emif_iodft_tlgc;
+	u32 padding2[7];
+	u32 emif_perf_cnt_1;
+	u32 emif_perf_cnt_2;
+	u32 emif_perf_cnt_cfg;
+	u32 emif_perf_cnt_sel;
+	u32 emif_perf_cnt_tim;
+	u32 padding3;
+	u32 emif_read_idlectrl;
+	u32 emif_read_idlectrl_shdw;
+	u32 padding4;
+	u32 emif_irqstatus_raw_sys;
+	u32 emif_irqstatus_raw_ll;
+	u32 emif_irqstatus_sys;
+	u32 emif_irqstatus_ll;
+	u32 emif_irqenable_set_sys;
+	u32 emif_irqenable_set_ll;
+	u32 emif_irqenable_clr_sys;
+	u32 emif_irqenable_clr_ll;
+	u32 padding5;
+	u32 emif_zq_config;
+	u32 emif_temp_alert_config;
+	u32 emif_l3_err_log;
+	u32 padding6[4];
+	u32 emif_ddr_phy_ctrl_1;
+	u32 emif_ddr_phy_ctrl_1_shdw;
+	u32 emif_ddr_phy_ctrl_2;
+};
+
+struct dmm_lisa_map_regs {
+	u32 dmm_lisa_map_0;
+	u32 dmm_lisa_map_1;
+	u32 dmm_lisa_map_2;
+	u32 dmm_lisa_map_3;
+};
+
+#define CS0	0
+#define CS1	1
+/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
+#define MAX_LPDDR2_FREQ	400000000	/* 400 MHz */
+
+/*
+ * The period of DDR clk is represented as numerator and denominator for
+ * better accuracy in integer based calculations. However, if the numerator
+ * and denominator are very huge there may be chances of overflow in
+ * calculations. So, as a trade-off keep denominator(and consequently
+ * numerator) within a limit sacrificing some accuracy - but not much
+ * If denominator and numerator are already small (such as at 400 MHz)
+ * no adjustment is needed
+ */
+#define EMIF_PERIOD_DEN_LIMIT	1000
+/*
+ * Maximum number of different frequencies supported by EMIF driver
+ * Determines the number of entries in the pointer array for register
+ * cache
+ */
+#define EMIF_MAX_NUM_FREQUENCIES	6
+/*
+ * Indices into the Addressing Table array.
+ * One entry each for all the different types of devices with different
+ * addressing schemes
+ */
+#define ADDR_TABLE_INDEX64M	0
+#define ADDR_TABLE_INDEX128M	1
+#define ADDR_TABLE_INDEX256M	2
+#define ADDR_TABLE_INDEX512M	3
+#define ADDR_TABLE_INDEX1GS4	4
+#define ADDR_TABLE_INDEX2GS4	5
+#define ADDR_TABLE_INDEX4G	6
+#define ADDR_TABLE_INDEX8G	7
+#define ADDR_TABLE_INDEX1GS2	8
+#define ADDR_TABLE_INDEX2GS2	9
+#define ADDR_TABLE_INDEXMAX	10
+
+/* Number of Row bits */
+#define ROW_9  0
+#define ROW_10 1
+#define ROW_11 2
+#define ROW_12 3
+#define ROW_13 4
+#define ROW_14 5
+#define ROW_15 6
+#define ROW_16 7
+
+/* Number of Column bits */
+#define COL_8   0
+#define COL_9   1
+#define COL_10  2
+#define COL_11  3
+#define COL_7   4 /*Not supported by OMAP included for completeness */
+
+/* Number of Banks*/
+#define BANKS1 0
+#define BANKS2 1
+#define BANKS4 2
+#define BANKS8 3
+
+/* Refresh rate in micro seconds x 10 */
+#define T_REFI_15_6	156
+#define T_REFI_7_8	78
+#define T_REFI_3_9	39
+
+#define EBANK_CS1_DIS	0
+#define EBANK_CS1_EN	1
+
+/* Read Latency used by the device at reset */
+#define RL_BOOT		3
+/* Read Latency for the highest frequency you want to use */
+#ifdef CONFIG_OMAP54XX
+#define RL_FINAL	8
+#else
+#define RL_FINAL	6
+#endif
+
+
+/* Interleaving policies at EMIF level- between banks and Chip Selects */
+#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING	0
+#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING	3
+
+/*
+ * Interleaving policy to be used
+ * Currently set to MAX interleaving for better performance
+ */
+#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING
+
+/* State of the core voltage:
+ * This is important for some parameters such as read idle control and
+ * ZQ calibration timings. Timings are much stricter when voltage ramp
+ * is happening compared to when the voltage is stable.
+ * We need to calculate two sets of values for these parameters and use
+ * them accordingly
+ */
+#define LPDDR2_VOLTAGE_STABLE	0
+#define LPDDR2_VOLTAGE_RAMPING	1
+
+/* Length of the forced read idle period in terms of cycles */
+#define EMIF_REG_READ_IDLE_LEN_VAL	5
+
+/* Interval between forced 'read idles' */
+/* To be used when voltage is changed for DPS/DVFS - 1us */
+#define READ_IDLE_INTERVAL_DVFS		(1*1000)
+/*
+ * To be used when voltage is not scaled except by Smart Reflex
+ * 50us - or maximum value will do
+ */
+#define READ_IDLE_INTERVAL_NORMAL	(50*1000)
+
+
+/*
+ * Unless voltage is changing due to DVFS one ZQCS command every 50ms should
+ * be enough. This shoule be enough also in the case when voltage is changing
+ * due to smart-reflex.
+ */
+#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US	(50*1000)
+/*
+ * If voltage is changing due to DVFS ZQCS should be performed more
+ * often(every 50us)
+ */
+#define EMIF_ZQCS_INTERVAL_DVFS_IN_US	50
+
+/* The interval between ZQCL commands as a multiple of ZQCS interval */
+#define REG_ZQ_ZQCL_MULT		4
+/* The interval between ZQINIT commands as a multiple of ZQCL interval */
+#define REG_ZQ_ZQINIT_MULT		3
+/* Enable ZQ Calibration on exiting Self-refresh */
+#define REG_ZQ_SFEXITEN_ENABLE		1
+/*
+ * ZQ Calibration simultaneously on both chip-selects:
+ * Needs one calibration resistor per CS
+ * None of the boards that we know of have this capability
+ * So disabled by default
+ */
+#define REG_ZQ_DUALCALEN_DISABLE	0
+/*
+ * Enable ZQ Calibration by default on CS0. If we are asked to program
+ * the EMIF there will be something connected to CS0 for sure
+ */
+#define REG_ZQ_CS0EN_ENABLE		1
+
+/* EMIF_PWR_MGMT_CTRL register */
+/* Low power modes */
+#define LP_MODE_DISABLE		0
+#define LP_MODE_CLOCK_STOP	1
+#define LP_MODE_SELF_REFRESH	2
+#define LP_MODE_PWR_DN		3
+
+/* REG_DPD_EN */
+#define DPD_DISABLE	0
+#define DPD_ENABLE	1
+
+/* Maximum delay before Low Power Modes */
+#define REG_CS_TIM		0xF
+#define REG_SR_TIM		0xF
+#define REG_PD_TIM		0xF
+
+/* EMIF_PWR_MGMT_CTRL register */
+#define EMIF_PWR_MGMT_CTRL (\
+	((REG_CS_TIM << EMIF_REG_CS_TIM_SHIFT) & EMIF_REG_CS_TIM_MASK)|\
+	((REG_SR_TIM << EMIF_REG_SR_TIM_SHIFT) & EMIF_REG_SR_TIM_MASK)|\
+	((REG_PD_TIM << EMIF_REG_PD_TIM_SHIFT) & EMIF_REG_PD_TIM_MASK)|\
+	((REG_PD_TIM << EMIF_REG_PD_TIM_SHIFT) & EMIF_REG_PD_TIM_MASK)|\
+	((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT)\
+			& EMIF_REG_LP_MODE_MASK) |\
+	((DPD_DISABLE << EMIF_REG_DPD_EN_SHIFT)\
+			& EMIF_REG_DPD_EN_MASK))\
+
+#define EMIF_PWR_MGMT_CTRL_SHDW (\
+	((REG_CS_TIM << EMIF_REG_CS_TIM_SHDW_SHIFT)\
+			& EMIF_REG_CS_TIM_SHDW_MASK) |\
+	((REG_SR_TIM << EMIF_REG_SR_TIM_SHDW_SHIFT)\
+			& EMIF_REG_SR_TIM_SHDW_MASK) |\
+	((REG_PD_TIM << EMIF_REG_PD_TIM_SHDW_SHIFT)\
+			& EMIF_REG_PD_TIM_SHDW_MASK) |\
+	((REG_PD_TIM << EMIF_REG_PD_TIM_SHDW_SHIFT)\
+			& EMIF_REG_PD_TIM_SHDW_MASK))
+
+/* EMIF_L3_CONFIG register value */
+#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0	0x0A0000FF
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0	0x0A300000
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0	0x0A300000
+
+/*
+ * Value of bits 12:31 of DDR_PHY_CTRL_1 register:
+ * All these fields have magic values dependent on frequency and
+ * determined by PHY and DLL integration with EMIF. Setting the magic
+ * values suggested by hw team.
+ */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL			0x049FF
+#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ			0x41
+#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ			0x80
+#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS	0xFF
+
+/*
+* MR1 value:
+* Burst length	: 8
+* Burst type	: sequential
+* Wrap		: enabled
+* nWR		: 3(default). EMIF does not do pre-charge.
+*		: So nWR is don't care
+*/
+#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3	0x23
+
+/* MR2 */
+#define MR2_RL3_WL1			1
+#define MR2_RL4_WL2			2
+#define MR2_RL5_WL2			3
+#define MR2_RL6_WL3			4
+
+/* MR10: ZQ calibration codes */
+#define MR10_ZQ_ZQCS		0x56
+#define MR10_ZQ_ZQCL		0xAB
+#define MR10_ZQ_ZQINIT		0xFF
+#define MR10_ZQ_ZQRESET		0xC3
+
+/* TEMP_ALERT_CONFIG */
+#define TEMP_ALERT_POLL_INTERVAL_MS	360 /* for temp gradient - 5 C/s */
+#define TEMP_ALERT_CONFIG_DEVCT_1	0
+#define TEMP_ALERT_CONFIG_DEVWDT_32	2
+
+/* MR16 value: refresh full array(no partial array self refresh) */
+#define MR16_REF_FULL_ARRAY	0
+
+/*
+ * Maximum number of entries we keep in our array of timing tables
+ * We need not keep all the speed bins supported by the device
+ * We need to keep timing tables for only the speed bins that we
+ * are interested in
+ */
+#define MAX_NUM_SPEEDBINS	4
+
+/* LPDDR2 Densities */
+#define LPDDR2_DENSITY_64Mb	0
+#define LPDDR2_DENSITY_128Mb	1
+#define LPDDR2_DENSITY_256Mb	2
+#define LPDDR2_DENSITY_512Mb	3
+#define LPDDR2_DENSITY_1Gb	4
+#define LPDDR2_DENSITY_2Gb	5
+#define LPDDR2_DENSITY_4Gb	6
+#define LPDDR2_DENSITY_8Gb	7
+#define LPDDR2_DENSITY_16Gb	8
+#define LPDDR2_DENSITY_32Gb	9
+
+/* LPDDR2 type */
+#define	LPDDR2_TYPE_S4	0
+#define	LPDDR2_TYPE_S2	1
+#define	LPDDR2_TYPE_NVM	2
+
+/* LPDDR2 IO width */
+#define	LPDDR2_IO_WIDTH_32	0
+#define	LPDDR2_IO_WIDTH_16	1
+#define	LPDDR2_IO_WIDTH_8	2
+
+/* Mode register numbers */
+#define LPDDR2_MR0	0
+#define LPDDR2_MR1	1
+#define LPDDR2_MR2	2
+#define LPDDR2_MR3	3
+#define LPDDR2_MR4	4
+#define LPDDR2_MR5	5
+#define LPDDR2_MR6	6
+#define LPDDR2_MR7	7
+#define LPDDR2_MR8	8
+#define LPDDR2_MR9	9
+#define LPDDR2_MR10	10
+#define LPDDR2_MR11	11
+#define LPDDR2_MR16	16
+#define LPDDR2_MR17	17
+#define LPDDR2_MR18	18
+
+/* MR0 */
+#define LPDDR2_MR0_DAI_SHIFT	0
+#define LPDDR2_MR0_DAI_MASK	1
+#define LPDDR2_MR0_DI_SHIFT	1
+#define LPDDR2_MR0_DI_MASK	(1 << 1)
+#define LPDDR2_MR0_DNVI_SHIFT	2
+#define LPDDR2_MR0_DNVI_MASK	(1 << 2)
+
+/* MR4 */
+#define MR4_SDRAM_REF_RATE_SHIFT	0
+#define MR4_SDRAM_REF_RATE_MASK		7
+#define MR4_TUF_SHIFT			7
+#define MR4_TUF_MASK			(1 << 7)
+
+/* MR4 SDRAM Refresh Rate field values */
+#define SDRAM_TEMP_LESS_LOW_SHUTDOWN			0x0
+#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS		0x1
+#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS		0x2
+#define SDRAM_TEMP_NOMINAL				0x3
+#define SDRAM_TEMP_RESERVED_4				0x4
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH			0x5
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS	0x6
+#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN			0x7
+
+#define LPDDR2_MANUFACTURER_SAMSUNG	1
+#define LPDDR2_MANUFACTURER_QIMONDA	2
+#define LPDDR2_MANUFACTURER_ELPIDA	3
+#define LPDDR2_MANUFACTURER_ETRON	4
+#define LPDDR2_MANUFACTURER_NANYA	5
+#define LPDDR2_MANUFACTURER_HYNIX	6
+#define LPDDR2_MANUFACTURER_MOSEL	7
+#define LPDDR2_MANUFACTURER_WINBOND	8
+#define LPDDR2_MANUFACTURER_ESMT	9
+#define LPDDR2_MANUFACTURER_SPANSION 11
+#define LPDDR2_MANUFACTURER_SST		12
+#define LPDDR2_MANUFACTURER_ZMOS	13
+#define LPDDR2_MANUFACTURER_INTEL	14
+#define LPDDR2_MANUFACTURER_NUMONYX	254
+#define LPDDR2_MANUFACTURER_MICRON	255
+
+/* MR8 register fields */
+#define MR8_TYPE_SHIFT		0x0
+#define MR8_TYPE_MASK		0x3
+#define MR8_DENSITY_SHIFT	0x2
+#define MR8_DENSITY_MASK	(0xF << 0x2)
+#define MR8_IO_WIDTH_SHIFT	0x6
+#define MR8_IO_WIDTH_MASK	(0x3 << 0x6)
+
+struct lpddr2_addressing {
+	u8	num_banks;
+	u8	t_REFI_us_x10;
+	u8	row_sz[2]; /* One entry each for x32 and x16 */
+	u8	col_sz[2]; /* One entry each for x32 and x16 */
+};
+
+/* Structure for timings from the DDR datasheet */
+struct lpddr2_ac_timings {
+	u32 max_freq;
+	u8 RL;
+	u8 tRPab;
+	u8 tRCD;
+	u8 tWR;
+	u8 tRASmin;
+	u8 tRRD;
+	u8 tWTRx2;
+	u8 tXSR;
+	u8 tXPx2;
+	u8 tRFCab;
+	u8 tRTPx2;
+	u8 tCKE;
+	u8 tCKESR;
+	u8 tZQCS;
+	u32 tZQCL;
+	u32 tZQINIT;
+	u8 tDQSCKMAXx2;
+	u8 tRASmax;
+	u8 tFAW;
+
+};
+
+/*
+ * Min tCK values for some of the parameters:
+ * If the calculated clock cycles for the respective parameter is
+ * less than the corresponding min tCK value, we need to set the min
+ * tCK value. This may happen at lower frequencies.
+ */
+struct lpddr2_min_tck {
+	u32 tRL;
+	u32 tRP_AB;
+	u32 tRCD;
+	u32 tWR;
+	u32 tRAS_MIN;
+	u32 tRRD;
+	u32 tWTR;
+	u32 tXP;
+	u32 tRTP;
+	u8  tCKE;
+	u32 tCKESR;
+	u32 tFAW;
+};
+
+struct lpddr2_device_details {
+	u8	type;
+	u8	density;
+	u8	io_width;
+	u8	manufacturer;
+};
+
+struct lpddr2_device_timings {
+	const struct lpddr2_ac_timings **ac_timings;
+	const struct lpddr2_min_tck *min_tck;
+};
+
+/* Details of the devices connected to each chip-select of an EMIF instance */
+struct emif_device_details {
+	const struct lpddr2_device_details *cs0_device_details;
+	const struct lpddr2_device_details *cs1_device_details;
+	const struct lpddr2_device_timings *cs0_device_timings;
+	const struct lpddr2_device_timings *cs1_device_timings;
+};
+
+/*
+ * Structure containing shadow of important registers in EMIF
+ * The calculation function fills in this structure to be later used for
+ * initialization and DVFS
+ */
+struct emif_regs {
+	u32 freq;
+	u32 sdram_config_init;
+	u32 sdram_config;
+	u32 ref_ctrl;
+	u32 sdram_tim1;
+	u32 sdram_tim2;
+	u32 sdram_tim3;
+	u32 read_idle_ctrl;
+	u32 zq_config;
+	u32 temp_alert_config;
+	u32 emif_ddr_phy_ctlr_1_init;
+	u32 emif_ddr_phy_ctlr_1;
+};
+
+/* assert macros */
+#if defined(DEBUG)
+#define emif_assert(c)	({ if (!(c)) for (;;); })
+#else
+#define emif_assert(c)	({ if (0) hang(); })
+#endif
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs);
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs);
+#else
+struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
+			struct lpddr2_device_details *lpddr2_dev_details);
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings);
+#endif
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+extern u32 *const T_num;
+extern u32 *const T_den;
+extern u32 *const emif_sizes;
+#endif
+
+
+#endif
