Patchwork [U-Boot,5/7] omap5: emif: Add emif/ddr configurations required for omap5 evm.

login
register
mail settings
Submitter SRICHARAN R
Date Oct. 19, 2011, 12:47 p.m.
Message ID <1319028444-11748-6-git-send-email-r.sricharan@ti.com>
Download mbox | patch
Permalink /patch/120682/
State Superseded
Headers show

Comments

SRICHARAN R - Oct. 19, 2011, 12:47 p.m.
Add the emif configurations required for omap5 soc.Add the
   correct ddr part configurations required for omap5 evm board.
   EDB8164B3PH from ELPIDA is the part used on the board.

   Also changes are done to retain some part of the code
   common for OMAP4/5 and keep only the remaining in the Soc
   specific directories.

Signed-off-by: sricharan <r.sricharan@ti.com>
---
 arch/arm/cpu/armv7/omap-common/emif-common.c   |  290 ++-----
 arch/arm/cpu/armv7/omap-common/hwinit-common.c |   22 +-
 arch/arm/cpu/armv7/omap4/Makefile              |    1 +
 arch/arm/cpu/armv7/omap4/emif.c                |  129 +++
 arch/arm/cpu/armv7/omap4/hwinit.c              |    2 +-
 arch/arm/cpu/armv7/omap4/sdram_elpida.c        |    2 +-
 arch/arm/cpu/armv7/omap5/emif.c                |  105 +++
 arch/arm/cpu/armv7/omap5/sdram_elpida.c        |  178 ++++
 arch/arm/include/asm/arch-omap4/emif.h         | 1021 -----------------------
 arch/arm/include/asm/emif.h                    | 1035 ++++++++++++++++++++++++
 10 files changed, 1551 insertions(+), 1234 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/omap4/emif.c
 create mode 100644 arch/arm/cpu/armv7/omap5/emif.c
 create mode 100644 arch/arm/cpu/armv7/omap5/sdram_elpida.c
 delete mode 100644 arch/arm/include/asm/arch-omap4/emif.h
 create mode 100644 arch/arm/include/asm/emif.h

Patch

diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index f85ae56..c47f2f9 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -26,28 +26,29 @@ 
  */
 
 #include <common.h>
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
 #include <asm/arch/clocks.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/omap_common.h>
 #include <asm/utils.h>
 
-static inline u32 emif_num(u32 base)
+inline u32 emif_num(u32 base)
 {
-	if (base == OMAP44XX_EMIF1)
+	if (base == EMIF1_BASE)
 		return 1;
-	else if (base == OMAP44XX_EMIF2)
+	else if (base == EMIF2_BASE)
 		return 2;
 	else
 		return 0;
 }
 
+
 static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
 {
 	u32 mr;
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
-	mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
+	mr_addr |= cs << EMIF_REG_CS_SHIFT;
 	writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
 	if (omap_revision() == OMAP4430_ES2_0)
 		mr = readl(&emif->emif_lpddr2_mode_reg_data_es2);
@@ -62,7 +63,7 @@  static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
-	mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
+	mr_addr |= cs << EMIF_REG_CS_SHIFT;
 	writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
 	writel(mr_val, &emif->emif_lpddr2_mode_reg_data);
 }
@@ -73,7 +74,7 @@  void emif_reset_phy(u32 base)
 	u32 iodft;
 
 	iodft = readl(&emif->emif_iodft_tlgc);
-	iodft |= OMAP44XX_REG_RESET_PHY_MASK;
+	iodft |= EMIF_REG_RESET_PHY_MASK;
 	writel(iodft, &emif->emif_iodft_tlgc);
 }
 
@@ -96,7 +97,7 @@  static void do_lpddr2_init(u32 base, u32 cs)
 	 * Enable refresh along with writing MR2
 	 * Encoding of RL in MR2 is (RL - 2)
 	 */
-	mr_addr = LPDDR2_MR2 | OMAP44XX_REG_REFRESH_EN_MASK;
+	mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
 	set_mr(base, cs, mr_addr, RL_FINAL - 2);
 }
 
@@ -105,13 +106,13 @@  static void lpddr2_init(u32 base, const struct emif_regs *regs)
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
 	/* Not NVM */
-	clrbits_le32(&emif->emif_lpddr2_nvm_config, OMAP44XX_REG_CS1NVMEN_MASK);
+	clrbits_le32(&emif->emif_lpddr2_nvm_config, EMIF_REG_CS1NVMEN_MASK);
 
 	/*
 	 * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM
 	 * when EMIF_SDRAM_CONFIG register is written
 	 */
-	setbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
+	setbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
 
 	/*
 	 * Set the SDRAM_CONFIG and PHY_CTRL for the
@@ -121,18 +122,18 @@  static void lpddr2_init(u32 base, const struct emif_regs *regs)
 	writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
 
 	do_lpddr2_init(base, CS0);
-	if (regs->sdram_config & OMAP44XX_REG_EBANK_MASK)
+	if (regs->sdram_config & EMIF_REG_EBANK_MASK)
 		do_lpddr2_init(base, CS1);
 
 	writel(regs->sdram_config, &emif->emif_sdram_config);
 	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
 
 	/* Enable refresh now */
-	clrbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
+	clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
 
 }
 
-static void emif_update_timings(u32 base, const struct emif_regs *regs)
+void emif_update_timings(u32 base, const struct emif_regs *regs)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
@@ -152,7 +153,10 @@  static void emif_update_timings(u32 base, const struct emif_regs *regs)
 	writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
 	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
 
-	if (omap_revision() >= OMAP4460_ES1_0) {
+	if (omap_revision() == OMAP5430_ES1_0) {
+		writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
+			&emif->emif_l3_config);
+	} else if (omap_revision() >= OMAP4460_ES1_0) {
 		writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
 			&emif->emif_l3_config);
 	} else {
@@ -164,10 +168,6 @@  static void emif_update_timings(u32 base, const struct emif_regs *regs)
 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 #define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
 
-static u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
-static u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
-static u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
-
 /*
  * Organization and refresh requirements for LPDDR2 devices of different
  * types and densities. Derived from JESD209-2 section 2.4
@@ -311,24 +311,24 @@  static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device,
 {
 	u32 config_reg = 0;
 
-	config_reg |=  (cs0_device->type + 4) << OMAP44XX_REG_SDRAM_TYPE_SHIFT;
+	config_reg |=  (cs0_device->type + 4) << EMIF_REG_SDRAM_TYPE_SHIFT;
 	config_reg |=  EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING <<
-			OMAP44XX_REG_IBANK_POS_SHIFT;
+			EMIF_REG_IBANK_POS_SHIFT;
 
-	config_reg |= cs0_device->io_width << OMAP44XX_REG_NARROW_MODE_SHIFT;
+	config_reg |= cs0_device->io_width << EMIF_REG_NARROW_MODE_SHIFT;
 
-	config_reg |= RL << OMAP44XX_REG_CL_SHIFT;
+	config_reg |= RL << EMIF_REG_CL_SHIFT;
 
 	config_reg |= addressing->row_sz[cs0_device->io_width] <<
-			OMAP44XX_REG_ROWSIZE_SHIFT;
+			EMIF_REG_ROWSIZE_SHIFT;
 
-	config_reg |= addressing->num_banks << OMAP44XX_REG_IBANK_SHIFT;
+	config_reg |= addressing->num_banks << EMIF_REG_IBANK_SHIFT;
 
 	config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) <<
-			OMAP44XX_REG_EBANK_SHIFT;
+			EMIF_REG_EBANK_SHIFT;
 
 	config_reg |= addressing->col_sz[cs0_device->io_width] <<
-			OMAP44XX_REG_PAGESIZE_SHIFT;
+			EMIF_REG_PAGESIZE_SHIFT;
 
 	return config_reg;
 }
@@ -343,7 +343,7 @@  static u32 get_sdram_ref_ctrl(u32 freq,
 	 * division by 10000 to account for khz and x10 in t_REFI_us_x10
 	 */
 	val = addressing->t_REFI_us_x10 * freq_khz / 10000;
-	ref_ctrl |= val << OMAP44XX_REG_REFRESH_RATE_SHIFT;
+	ref_ctrl |= val << EMIF_REG_REFRESH_RATE_SHIFT;
 
 	return ref_ctrl;
 }
@@ -354,7 +354,7 @@  static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings,
 {
 	u32 tim1 = 0, val = 0;
 	val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1;
-	tim1 |= val << OMAP44XX_REG_T_WTR_SHIFT;
+	tim1 |= val << EMIF_REG_T_WTR_SHIFT;
 
 	if (addressing->num_banks == BANKS8)
 		val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) /
@@ -362,22 +362,22 @@  static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings,
 	else
 		val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1;
 
-	tim1 |= val << OMAP44XX_REG_T_RRD_SHIFT;
+	tim1 |= val << EMIF_REG_T_RRD_SHIFT;
 
 	val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1;
-	tim1 |= val << OMAP44XX_REG_T_RC_SHIFT;
+	tim1 |= val << EMIF_REG_T_RC_SHIFT;
 
 	val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1;
-	tim1 |= val << OMAP44XX_REG_T_RAS_SHIFT;
+	tim1 |= val << EMIF_REG_T_RAS_SHIFT;
 
 	val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1;
-	tim1 |= val << OMAP44XX_REG_T_WR_SHIFT;
+	tim1 |= val << EMIF_REG_T_WR_SHIFT;
 
 	val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1;
-	tim1 |= val << OMAP44XX_REG_T_RCD_SHIFT;
+	tim1 |= val << EMIF_REG_T_RCD_SHIFT;
 
 	val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1;
-	tim1 |= val << OMAP44XX_REG_T_RP_SHIFT;
+	tim1 |= val << EMIF_REG_T_RP_SHIFT;
 
 	return tim1;
 }
@@ -387,21 +387,21 @@  static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings,
 {
 	u32 tim2 = 0, val = 0;
 	val = max(min_tck->tCKE, timings->tCKE) - 1;
-	tim2 |= val << OMAP44XX_REG_T_CKE_SHIFT;
+	tim2 |= val << EMIF_REG_T_CKE_SHIFT;
 
 	val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1;
-	tim2 |= val << OMAP44XX_REG_T_RTP_SHIFT;
+	tim2 |= val << EMIF_REG_T_RTP_SHIFT;
 
 	/*
 	 * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the
 	 * same value
 	 */
 	val = ns_2_cycles(timings->tXSR) - 1;
-	tim2 |= val << OMAP44XX_REG_T_XSRD_SHIFT;
-	tim2 |= val << OMAP44XX_REG_T_XSNR_SHIFT;
+	tim2 |= val << EMIF_REG_T_XSRD_SHIFT;
+	tim2 |= val << EMIF_REG_T_XSNR_SHIFT;
 
 	val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1;
-	tim2 |= val << OMAP44XX_REG_T_XP_SHIFT;
+	tim2 |= val << EMIF_REG_T_XP_SHIFT;
 
 	return tim2;
 }
@@ -412,19 +412,19 @@  static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings,
 {
 	u32 tim3 = 0, val = 0;
 	val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF);
-	tim3 |= val << OMAP44XX_REG_T_RAS_MAX_SHIFT;
+	tim3 |= val << EMIF_REG_T_RAS_MAX_SHIFT;
 
 	val = ns_2_cycles(timings->tRFCab) - 1;
-	tim3 |= val << OMAP44XX_REG_T_RFC_SHIFT;
+	tim3 |= val << EMIF_REG_T_RFC_SHIFT;
 
 	val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1;
-	tim3 |= val << OMAP44XX_REG_T_TDQSCKMAX_SHIFT;
+	tim3 |= val << EMIF_REG_T_TDQSCKMAX_SHIFT;
 
 	val = ns_2_cycles(timings->tZQCS) - 1;
-	tim3 |= val << OMAP44XX_REG_ZQ_ZQCS_SHIFT;
+	tim3 |= val << EMIF_REG_ZQ_ZQCS_SHIFT;
 
 	val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1;
-	tim3 |= val << OMAP44XX_REG_T_CKESR_SHIFT;
+	tim3 |= val << EMIF_REG_T_CKESR_SHIFT;
 
 	return tim3;
 }
@@ -442,13 +442,13 @@  static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device,
 		val =
 		    EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 /
 		    addressing->t_REFI_us_x10;
-	zq |= val << OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT;
+	zq |= val << EMIF_REG_ZQ_REFINTERVAL_SHIFT;
 
-	zq |= (REG_ZQ_ZQCL_MULT - 1) << OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT;
+	zq |= (REG_ZQ_ZQCL_MULT - 1) << EMIF_REG_ZQ_ZQCL_MULT_SHIFT;
 
-	zq |= (REG_ZQ_ZQINIT_MULT - 1) << OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT;
+	zq |= (REG_ZQ_ZQINIT_MULT - 1) << EMIF_REG_ZQ_ZQINIT_MULT_SHIFT;
 
-	zq |= REG_ZQ_SFEXITEN_ENABLE << OMAP44XX_REG_ZQ_SFEXITEN_SHIFT;
+	zq |= REG_ZQ_SFEXITEN_ENABLE << EMIF_REG_ZQ_SFEXITEN_SHIFT;
 
 	/*
 	 * Assuming that two chipselects have a single calibration resistor
@@ -458,11 +458,11 @@  static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device,
 	 * that none of the boards today have calibration resistors per CS,
 	 * it would be an unnecessary overhead.
 	 */
-	zq |= REG_ZQ_DUALCALEN_DISABLE << OMAP44XX_REG_ZQ_DUALCALEN_SHIFT;
+	zq |= REG_ZQ_DUALCALEN_DISABLE << EMIF_REG_ZQ_DUALCALEN_SHIFT;
 
-	zq |= REG_ZQ_CS0EN_ENABLE << OMAP44XX_REG_ZQ_CS0EN_SHIFT;
+	zq |= REG_ZQ_CS0EN_ENABLE << EMIF_REG_ZQ_CS0EN_SHIFT;
 
-	zq |= (cs1_device ? 1 : 0) << OMAP44XX_REG_ZQ_CS1EN_SHIFT;
+	zq |= (cs1_device ? 1 : 0) << EMIF_REG_ZQ_CS1EN_SHIFT;
 
 	return zq;
 }
@@ -476,17 +476,17 @@  static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device,
 	    TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10;
 	if (is_derated)
 		interval *= 4;
-	alert |= interval << OMAP44XX_REG_TA_REFINTERVAL_SHIFT;
+	alert |= interval << EMIF_REG_TA_REFINTERVAL_SHIFT;
 
-	alert |= TEMP_ALERT_CONFIG_DEVCT_1 << OMAP44XX_REG_TA_DEVCNT_SHIFT;
+	alert |= TEMP_ALERT_CONFIG_DEVCT_1 << EMIF_REG_TA_DEVCNT_SHIFT;
 
-	alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << OMAP44XX_REG_TA_DEVWDT_SHIFT;
+	alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << EMIF_REG_TA_DEVWDT_SHIFT;
 
-	alert |= 1 << OMAP44XX_REG_TA_SFEXITEN_SHIFT;
+	alert |= 1 << EMIF_REG_TA_SFEXITEN_SHIFT;
 
-	alert |= 1 << OMAP44XX_REG_TA_CS0EN_SHIFT;
+	alert |= 1 << EMIF_REG_TA_CS0EN_SHIFT;
 
-	alert |= (cs1_device ? 1 : 0) << OMAP44XX_REG_TA_CS1EN_SHIFT;
+	alert |= (cs1_device ? 1 : 0) << EMIF_REG_TA_CS1EN_SHIFT;
 
 	return alert;
 }
@@ -499,9 +499,9 @@  static u32 get_read_idle_ctrl_reg(u8 volt_ramp)
 	else
 		/*Maximum value in normal conditions - suggested by hw team */
 		val = 0x1FF;
-	idle |= val << OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT;
+	idle |= val << EMIF_REG_READ_IDLE_INTERVAL_SHIFT;
 
-	idle |= EMIF_REG_READ_IDLE_LEN_VAL << OMAP44XX_REG_READ_IDLE_LEN_SHIFT;
+	idle |= EMIF_REG_READ_IDLE_LEN_VAL << EMIF_REG_READ_IDLE_LEN_SHIFT;
 
 	return idle;
 }
@@ -510,7 +510,7 @@  static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL)
 {
 	u32 phy = 0, val = 0;
 
-	phy |= (RL + 2) << OMAP44XX_REG_READ_LATENCY_SHIFT;
+	phy |= (RL + 2) << EMIF_REG_READ_LATENCY_SHIFT;
 
 	if (freq <= 100000000)
 		val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS;
@@ -518,11 +518,11 @@  static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL)
 		val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ;
 	else
 		val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ;
-	phy |= val << OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT;
+	phy |= val << EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT;
 
 	/* Other fields are constant magic values. Hardcode them together */
 	phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL <<
-		OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT;
+		EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT;
 
 	return phy;
 }
@@ -666,123 +666,6 @@  static void emif_calculate_regs(
 }
 #endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
 
-#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_400_mhz = {
-	.max_freq = 400000000,
-	.RL = 6,
-	.tRPab = 21,
-	.tRCD = 18,
-	.tWR = 15,
-	.tRASmin = 42,
-	.tRRD = 10,
-	.tWTRx2 = 15,
-	.tXSR = 140,
-	.tXPx2 = 15,
-	.tRFCab = 130,
-	.tRTPx2 = 15,
-	.tCKE = 3,
-	.tCKESR = 15,
-	.tZQCS = 90,
-	.tZQCL = 360,
-	.tZQINIT = 1000,
-	.tDQSCKMAXx2 = 11,
-	.tRASmax = 70,
-	.tFAW = 50
-};
-
-/* Base AC Timing values specified by JESD209-2 for 333 MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_333_mhz = {
-	.max_freq = 333000000,
-	.RL = 5,
-	.tRPab = 21,
-	.tRCD = 18,
-	.tWR = 15,
-	.tRASmin = 42,
-	.tRRD = 10,
-	.tWTRx2 = 15,
-	.tXSR = 140,
-	.tXPx2 = 15,
-	.tRFCab = 130,
-	.tRTPx2 = 15,
-	.tCKE = 3,
-	.tCKESR = 15,
-	.tZQCS = 90,
-	.tZQCL = 360,
-	.tZQINIT = 1000,
-	.tDQSCKMAXx2 = 11,
-	.tRASmax = 70,
-	.tFAW = 50
-};
-
-/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
-	.max_freq = 200000000,
-	.RL = 3,
-	.tRPab = 21,
-	.tRCD = 18,
-	.tWR = 15,
-	.tRASmin = 42,
-	.tRRD = 10,
-	.tWTRx2 = 20,
-	.tXSR = 140,
-	.tXPx2 = 15,
-	.tRFCab = 130,
-	.tRTPx2 = 15,
-	.tCKE = 3,
-	.tCKESR = 15,
-	.tZQCS = 90,
-	.tZQCL = 360,
-	.tZQINIT = 1000,
-	.tDQSCKMAXx2 = 11,
-	.tRASmax = 70,
-	.tFAW = 50
-};
-
-/*
- * Min tCK values specified by JESD209-2
- * Min tCK specifies the minimum duration of some AC timing parameters in terms
- * of the number of cycles. If the calculated number of cycles based on the
- * absolute time value is less than the min tCK value, min tCK value should
- * be used instead. This typically happens at low frequencies.
- */
-static const struct lpddr2_min_tck min_tck_jedec = {
-	.tRL = 3,
-	.tRP_AB = 3,
-	.tRCD = 3,
-	.tWR = 3,
-	.tRAS_MIN = 3,
-	.tRRD = 2,
-	.tWTR = 2,
-	.tXP = 2,
-	.tRTP = 2,
-	.tCKE = 3,
-	.tCKESR = 3,
-	.tFAW = 8
-};
-
-static const struct lpddr2_ac_timings const*
-			jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
-	&timings_jedec_200_mhz,
-	&timings_jedec_333_mhz,
-	&timings_jedec_400_mhz
-};
-
-static const struct lpddr2_device_timings jedec_default_timings = {
-	.ac_timings = jedec_ac_timings,
-	.min_tck = &min_tck_jedec
-};
-
-void emif_get_device_timings(u32 emif_nr,
-		const struct lpddr2_device_timings **cs0_device_timings,
-		const struct lpddr2_device_timings **cs1_device_timings)
-{
-	/* Assume Identical devices on EMIF1 & EMIF2 */
-	*cs0_device_timings = &jedec_default_timings;
-	*cs1_device_timings = &jedec_default_timings;
-}
-#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
-
 #ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
 const char *get_lpddr2_type(u8 type_id)
 {
@@ -967,7 +850,8 @@  struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
 			struct lpddr2_device_details *lpddr2_dev_details)
 {
 	u32 phy;
-	u32 base = (emif_nr == 1) ? OMAP44XX_EMIF1 : OMAP44XX_EMIF2;
+	u32 base = (emif_nr == 1) ? EMIF1_BASE : EMIF2_BASE;
+
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
 	if (!lpddr2_dev_details)
@@ -996,7 +880,7 @@  static void do_sdram_init(u32 base)
 	debug(">>do_sdram_init() %x\n", base);
 
 	in_sdram = running_from_sdram();
-	emif_nr = (base == OMAP44XX_EMIF1) ? 1 : 2;
+	emif_nr = (base == EMIF1_BASE) ? 1 : 2;
 
 #ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 	emif_get_reg_dump(emif_nr, &regs);
@@ -1063,21 +947,24 @@  static void do_sdram_init(u32 base)
 	debug("<<do_sdram_init() %x\n", base);
 }
 
-static void emif_post_init_config(u32 base)
+void emif_post_init_config(u32 base)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-	u32 omap4_rev = omap_revision();
+	u32 omap_rev = omap_revision();
+
+	if (omap_rev == OMAP5430_ES1_0)
+		return;
 
 	/* reset phy on ES2.0 */
-	if (omap4_rev == OMAP4430_ES2_0)
+	if (omap_rev == OMAP4430_ES2_0)
 		emif_reset_phy(base);
 
 	/* Put EMIF back in smart idle on ES1.0 */
-	if (omap4_rev == OMAP4430_ES1_0)
+	if (omap_rev == OMAP4430_ES1_0)
 		writel(0x80000000, &emif->emif_pwr_mgmt_ctrl);
 }
 
-static void dmm_init(u32 base)
+void dmm_init(u32 base)
 {
 	const struct dmm_lisa_map_regs *lisa_map_regs;
 
@@ -1102,12 +989,12 @@  static void dmm_init(u32 base)
 	if (emif1_size && emif2_size) {
 		mapped_size = min(emif1_size, emif2_size);
 		section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL;
-		section_map |= 0 << OMAP44XX_SDRC_ADDR_SHIFT;
+		section_map |= 0 << EMIF_SDRC_ADDR_SHIFT;
 		/* only MSB */
 		section_map |= (sys_addr >> 24) <<
-				OMAP44XX_SYS_ADDR_SHIFT;
+				EMIF_SYS_ADDR_SHIFT;
 		section_map |= get_dmm_section_size_map(mapped_size * 2)
-				<< OMAP44XX_SYS_SIZE_SHIFT;
+				<< EMIF_SYS_SIZE_SHIFT;
 		lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
 		emif1_size -= mapped_size;
 		emif2_size -= mapped_size;
@@ -1122,22 +1009,22 @@  static void dmm_init(u32 base)
 	if (emif1_size) {
 		section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL;
 		section_map |= get_dmm_section_size_map(emif1_size)
-				<< OMAP44XX_SYS_SIZE_SHIFT;
+				<< EMIF_SYS_SIZE_SHIFT;
 		/* only MSB */
 		section_map |= (mapped_size >> 24) <<
-				OMAP44XX_SDRC_ADDR_SHIFT;
+				EMIF_SDRC_ADDR_SHIFT;
 		/* only MSB */
-		section_map |= (sys_addr >> 24) << OMAP44XX_SYS_ADDR_SHIFT;
+		section_map |= (sys_addr >> 24) << EMIF_SYS_ADDR_SHIFT;
 		section_cnt--;
 	}
 	if (emif2_size) {
 		section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL;
 		section_map |= get_dmm_section_size_map(emif2_size) <<
-				OMAP44XX_SYS_SIZE_SHIFT;
+				EMIF_SYS_SIZE_SHIFT;
 		/* only MSB */
-		section_map |= mapped_size >> 24 << OMAP44XX_SDRC_ADDR_SHIFT;
+		section_map |= mapped_size >> 24 << EMIF_SDRC_ADDR_SHIFT;
 		/* only MSB */
-		section_map |= sys_addr >> 24 << OMAP44XX_SYS_ADDR_SHIFT;
+		section_map |= sys_addr >> 24 << EMIF_SYS_ADDR_SHIFT;
 		section_cnt--;
 	}
 
@@ -1176,7 +1063,7 @@  static void dmm_init(u32 base)
 
 	if (omap_revision() >= OMAP4460_ES1_0) {
 		hw_lisa_map_regs =
-		    (struct dmm_lisa_map_regs *)OMAP44XX_MA_LISA_MAP_BASE;
+		    (struct dmm_lisa_map_regs *)MA_BASE;
 
 		writel(lisa_map_regs->dmm_lisa_map_3,
 			&hw_lisa_map_regs->dmm_lisa_map_3);
@@ -1222,14 +1109,13 @@  void sdram_init(void)
 		bypass_dpll(&prcm->cm_clkmode_dpll_core);
 	}
 
-	do_sdram_init(OMAP44XX_EMIF1);
-	do_sdram_init(OMAP44XX_EMIF2);
+	do_sdram_init(EMIF1_BASE);
+	do_sdram_init(EMIF2_BASE);
 
 	if (!in_sdram) {
-		dmm_init(OMAP44XX_DMM_LISA_MAP_BASE);
-		emif_post_init_config(OMAP44XX_EMIF1);
-		emif_post_init_config(OMAP44XX_EMIF2);
-
+		dmm_init(DMM_BASE);
+		emif_post_init_config(EMIF1_BASE);
+		emif_post_init_config(EMIF2_BASE);
 	}
 
 	/* for the shadow registers to take effect */
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 75740cb..b370d31 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -30,7 +30,7 @@ 
 #include <common.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/sizes.h>
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -168,19 +168,23 @@  void watchdog_init(void)
 u32 omap_sdram_size(void)
 {
 	u32 section, i, total_size = 0, size, addr;
+
 	for (i = 0; i < 4; i++) {
-		section	= __raw_readl(OMAP44XX_DMM_LISA_MAP_BASE + i*4);
-		addr = section & OMAP44XX_SYS_ADDR_MASK;
+		section	= __raw_readl(DMM_BASE + i*4);
+		addr = section & EMIF_SYS_ADDR_MASK;
 		/* See if the address is valid */
-		if ((addr >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
-		    (addr < OMAP44XX_DRAM_ADDR_SPACE_END)) {
-			size	= ((section & OMAP44XX_SYS_SIZE_MASK) >>
-				   OMAP44XX_SYS_SIZE_SHIFT);
-			size	= 1 << size;
-			size	*= SZ_16M;
+		if ((addr >= DRAM_ADDR_SPACE_START) &&
+		    (addr < DRAM_ADDR_SPACE_END)) {
+			size = ((section & EMIF_SYS_SIZE_MASK) >>
+				   EMIF_SYS_SIZE_SHIFT);
+			size = 1 << size;
+			size *= SZ_16M;
 			total_size += size;
 		}
 	}
+
+	total_size = SZ_16M;
+
 	return total_size;
 }
 
diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
index c7bfa27..83160a2 100644
--- a/arch/arm/cpu/armv7/omap4/Makefile
+++ b/arch/arm/cpu/armv7/omap4/Makefile
@@ -28,6 +28,7 @@  LIB	=  $(obj)lib$(SOC).o
 COBJS	+= sdram_elpida.o
 COBJS	+= hwinit.o
 COBJS	+= clocks.o
+COBJS	+= emif.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c
new file mode 100644
index 0000000..ca4823d
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/emif.c
@@ -0,0 +1,129 @@ 
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
+u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
+u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
+#endif
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_400_mhz = {
+	.max_freq = 400000000,
+	.RL = 6,
+	.tRPab = 21,
+	.tRCD = 18,
+	.tWR = 15,
+	.tRASmin = 42,
+	.tRRD = 10,
+	.tWTRx2 = 15,
+	.tXSR = 140,
+	.tXPx2 = 15,
+	.tRFCab = 130,
+	.tRTPx2 = 15,
+	.tCKE = 3,
+	.tCKESR = 15,
+	.tZQCS = 90,
+	.tZQCL = 360,
+	.tZQINIT = 1000,
+	.tDQSCKMAXx2 = 11,
+	.tRASmax = 70,
+	.tFAW = 50
+};
+
+/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
+	.max_freq = 200000000,
+	.RL = 3,
+	.tRPab = 21,
+	.tRCD = 18,
+	.tWR = 15,
+	.tRASmin = 42,
+	.tRRD = 10,
+	.tWTRx2 = 20,
+	.tXSR = 140,
+	.tXPx2 = 15,
+	.tRFCab = 130,
+	.tRTPx2 = 15,
+	.tCKE = 3,
+	.tCKESR = 15,
+	.tZQCS = 90,
+	.tZQCL = 360,
+	.tZQINIT = 1000,
+	.tDQSCKMAXx2 = 11,
+	.tRASmax = 70,
+	.tFAW = 50
+};
+
+/*
+ * Min tCK values specified by JESD209-2
+ * Min tCK specifies the minimum duration of some AC timing parameters in terms
+ * of the number of cycles. If the calculated number of cycles based on the
+ * absolute time value is less than the min tCK value, min tCK value should
+ * be used instead. This typically happens at low frequencies.
+ */
+static const struct lpddr2_min_tck min_tck_jedec = {
+	.tRL = 3,
+	.tRP_AB = 3,
+	.tRCD = 3,
+	.tWR = 3,
+	.tRAS_MIN = 3,
+	.tRRD = 2,
+	.tWTR = 2,
+	.tXP = 2,
+	.tRTP = 2,
+	.tCKE = 3,
+	.tCKESR = 3,
+	.tFAW = 8
+};
+
+static const struct lpddr2_ac_timings const*
+			jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
+	&timings_jedec_200_mhz,
+	&timings_jedec_400_mhz
+};
+
+static const struct lpddr2_device_timings jedec_default_timings = {
+	.ac_timings = jedec_ac_timings,
+	.min_tck = &min_tck_jedec
+};
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	/* Assume Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &jedec_default_timings;
+	*cs1_device_timings = &jedec_default_timings;
+}
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
index 78b3cab..52c9b19 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -32,7 +32,7 @@ 
 #include <asm/arch/cpu.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/sizes.h>
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
 #include <asm/arch/gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
index edc5326..a5ec7d3 100644
--- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c
+++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
@@ -26,7 +26,7 @@ 
  * MA 02111-1307 USA
  */
 
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
 #include <asm/arch/sys_proto.h>
 
 /*
diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/cpu/armv7/omap5/emif.c
new file mode 100644
index 0000000..8019ffe
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/emif.c
@@ -0,0 +1,105 @@ 
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com> for OMAP4
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
+static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM;
+static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN;
+static u32 *const emif_sizes = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_SIZE;
+#endif
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+/* Base AC Timing values specified by JESD209-2 for 532MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+	.max_freq = 532000000,
+	.RL = 8,
+	.tRPab = 21,
+	.tRCD = 18,
+	.tWR = 15,
+	.tRASmin = 42,
+	.tRRD = 10,
+	.tWTRx2 = 15,
+	.tXSR = 140,
+	.tXPx2 = 15,
+	.tRFCab = 130,
+	.tRTPx2 = 15,
+	.tCKE = 3,
+	.tCKESR = 15,
+	.tZQCS = 90,
+	.tZQCL = 360,
+	.tZQINIT = 1000,
+	.tDQSCKMAXx2 = 11,
+	.tRASmax = 70,
+	.tFAW = 50
+};
+
+/*
+ * Min tCK values specified by JESD209-2
+ * Min tCK specifies the minimum duration of some AC timing parameters in terms
+ * of the number of cycles. If the calculated number of cycles based on the
+ * absolute time value is less than the min tCK value, min tCK value should
+ * be used instead. This typically happens at low frequencies.
+ */
+static const struct lpddr2_min_tck min_tck_jedec = {
+	.tRL = 3,
+	.tRP_AB = 3,
+	.tRCD = 3,
+	.tWR = 3,
+	.tRAS_MIN = 3,
+	.tRRD = 2,
+	.tWTR = 2,
+	.tXP = 2,
+	.tRTP = 2,
+	.tCKE = 3,
+	.tCKESR = 3,
+	.tFAW = 8
+};
+
+static const struct lpddr2_ac_timings const*
+			jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
+	&timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings jedec_default_timings = {
+	.ac_timings = jedec_ac_timings,
+	.min_tck = &min_tck_jedec
+};
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	/* Assume Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &jedec_default_timings;
+	*cs1_device_timings = NULL;
+}
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/arch/arm/cpu/armv7/omap5/sdram_elpida.c b/arch/arm/cpu/armv7/omap5/sdram_elpida.c
new file mode 100644
index 0000000..ad198e6
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/sdram_elpida.c
@@ -0,0 +1,178 @@ 
+/*
+ * Timing and Organization details of the Elpida parts used in OMAP5
+ * EVM
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ * This file provides details of the LPDDR2 SDRAM parts used on OMAP5
+ * EVM. Since the parts used and geometry are identical for
+ * evm for a given OMAP5 revision, this information is kept
+ * here instead of being in board directory. However the key functions
+ * exported are weakly linked so that they can be over-ridden in the board
+ * directory if there is a OMAP5 board in the future that uses a different
+ * memory device or geometry.
+ *
+ * For any new board with different memory devices over-ride one or more
+ * of the following functions as per the CONFIG flags you intend to enable:
+ * - emif_get_reg_dump()
+ * - emif_get_dmm_regs()
+ * - emif_get_device_details()
+ * - emif_get_device_timings()
+ */
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+const struct emif_regs emif_regs_elpida_532_mhz_1cs = {
+	.sdram_config_init		= 0x80801aB2,
+	.sdram_config			= 0x808022B2,
+	.ref_ctrl			= 0x0000081A,
+	.sdram_tim1			= 0x772F6873,
+	.sdram_tim2			= 0x304A129A,
+	.sdram_tim3			= 0x02F7E45F,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x000B3215,
+	.temp_alert_config		= 0x08000A05,
+	.emif_ddr_phy_ctlr_1_init	= 0x0E38200D,
+	.emif_ddr_phy_ctlr_1		= 0x0E38200D
+};
+
+const struct dmm_lisa_map_regs lisa_map_4G_x_1_x_2 = {
+	.dmm_lisa_map_0 = 0xFF020100,
+	.dmm_lisa_map_1 = 0,
+	.dmm_lisa_map_2 = 0,
+	.dmm_lisa_map_3 = 0x80640300
+};
+
+static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
+{
+	*regs = &emif_regs_elpida_532_mhz_1cs;
+}
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+	__attribute__((weak, alias("emif_get_reg_dump_sdp")));
+
+static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
+						**dmm_lisa_regs)
+{
+	*dmm_lisa_regs = &lisa_map_4G_x_1_x_2;
+}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+	__attribute__((weak, alias("emif_get_dmm_regs_sdp")));
+
+#else
+
+static const struct lpddr2_device_details elpida_4G_S4_details = {
+	.type		= LPDDR2_TYPE_S4,
+	.density	= LPDDR2_DENSITY_4Gb,
+	.io_width	= LPDDR2_IO_WIDTH_32,
+	.manufacturer	= LPDDR2_MANUFACTURER_ELPIDA
+};
+
+static void emif_get_device_details_sdp(u32 emif_nr,
+		struct lpddr2_device_details *cs0_device_details,
+		struct lpddr2_device_details *cs1_device_details)
+{
+	/* EMIF1 & EMIF2 have identical configuration */
+	*cs0_device_details = elpida_4G_S4_details;
+
+	/* Nothing is conected on cs1 */
+	cs1_device_details = NULL;
+}
+
+void emif_get_device_details(u32 emif_nr,
+		struct lpddr2_device_details *cs0_device_details,
+		struct lpddr2_device_details *cs1_device_details)
+	__attribute__((weak, alias("emif_get_device_details_sdp")));
+
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+	.max_freq	= 532000000,
+	.RL		= 8,
+	.tRPab		= 21,
+	.tRCD		= 18,
+	.tWR		= 15,
+	.tRASmin	= 42,
+	.tRRD		= 10,
+	.tWTRx2		= 15,
+	.tXSR		= 140,
+	.tXPx2		= 15,
+	.tRFCab		= 130,
+	.tRTPx2		= 15,
+	.tCKE		= 3,
+	.tCKESR		= 15,
+	.tZQCS		= 90,
+	.tZQCL		= 360,
+	.tZQINIT	= 1000,
+	.tDQSCKMAXx2	= 11,
+	.tRASmax	= 70,
+	.tFAW		= 50
+};
+
+static const struct lpddr2_min_tck min_tck_elpida = {
+	.tRL		= 3,
+	.tRP_AB		= 3,
+	.tRCD		= 3,
+	.tWR		= 3,
+	.tRAS_MIN	= 3,
+	.tRRD		= 2,
+	.tWTR		= 2,
+	.tXP		= 2,
+	.tRTP		= 2,
+	.tCKE		= 3,
+	.tCKESR		= 3,
+	.tFAW		= 8
+};
+
+static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = {
+	&timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings elpida_4G_S4_timings = {
+	.ac_timings	= elpida_ac_timings,
+	.min_tck	= &min_tck_elpida,
+};
+
+void emif_get_device_timings_sdp(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	/* Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &elpida_4G_S4_timings;
+	*cs1_device_timings = NULL;
+}
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+	__attribute__((weak, alias("emif_get_device_timings_sdp")));
+
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/arch/arm/include/asm/arch-omap4/emif.h b/arch/arm/include/asm/arch-omap4/emif.h
deleted file mode 100644
index 3a549ba..0000000
--- a/arch/arm/include/asm/arch-omap4/emif.h
+++ /dev/null
@@ -1,1021 +0,0 @@ 
-/*
- * OMAP44xx EMIF header
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Aneesh V <aneesh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _EMIF_H_
-#define _EMIF_H_
-#include <asm/types.h>
-#include <common.h>
-
-/* Base address */
-#define OMAP44XX_EMIF1				0x4c000000
-#define OMAP44XX_EMIF2				0x4d000000
-
-/* Registers shifts and masks */
-
-/* EMIF_MOD_ID_REV */
-#define OMAP44XX_REG_SCHEME_SHIFT			30
-#define OMAP44XX_REG_SCHEME_MASK			(0x3 << 30)
-#define OMAP44XX_REG_MODULE_ID_SHIFT			16
-#define OMAP44XX_REG_MODULE_ID_MASK			(0xfff << 16)
-#define OMAP44XX_REG_RTL_VERSION_SHIFT			11
-#define OMAP44XX_REG_RTL_VERSION_MASK			(0x1f << 11)
-#define OMAP44XX_REG_MAJOR_REVISION_SHIFT		8
-#define OMAP44XX_REG_MAJOR_REVISION_MASK		(0x7 << 8)
-#define OMAP44XX_REG_MINOR_REVISION_SHIFT		0
-#define OMAP44XX_REG_MINOR_REVISION_MASK		(0x3f << 0)
-
-/* STATUS */
-#define OMAP44XX_REG_BE_SHIFT				31
-#define OMAP44XX_REG_BE_MASK				(1 << 31)
-#define OMAP44XX_REG_DUAL_CLK_MODE_SHIFT		30
-#define OMAP44XX_REG_DUAL_CLK_MODE_MASK			(1 << 30)
-#define OMAP44XX_REG_FAST_INIT_SHIFT			29
-#define OMAP44XX_REG_FAST_INIT_MASK			(1 << 29)
-#define OMAP44XX_REG_PHY_DLL_READY_SHIFT		2
-#define OMAP44XX_REG_PHY_DLL_READY_MASK			(1 << 2)
-
-/* SDRAM_CONFIG */
-#define OMAP44XX_REG_SDRAM_TYPE_SHIFT			29
-#define OMAP44XX_REG_SDRAM_TYPE_MASK			(0x7 << 29)
-#define OMAP44XX_REG_IBANK_POS_SHIFT			27
-#define OMAP44XX_REG_IBANK_POS_MASK			(0x3 << 27)
-#define OMAP44XX_REG_DDR_TERM_SHIFT			24
-#define OMAP44XX_REG_DDR_TERM_MASK			(0x7 << 24)
-#define OMAP44XX_REG_DDR2_DDQS_SHIFT			23
-#define OMAP44XX_REG_DDR2_DDQS_MASK			(1 << 23)
-#define OMAP44XX_REG_DYN_ODT_SHIFT			21
-#define OMAP44XX_REG_DYN_ODT_MASK			(0x3 << 21)
-#define OMAP44XX_REG_DDR_DISABLE_DLL_SHIFT		20
-#define OMAP44XX_REG_DDR_DISABLE_DLL_MASK		(1 << 20)
-#define OMAP44XX_REG_SDRAM_DRIVE_SHIFT			18
-#define OMAP44XX_REG_SDRAM_DRIVE_MASK			(0x3 << 18)
-#define OMAP44XX_REG_CWL_SHIFT				16
-#define OMAP44XX_REG_CWL_MASK				(0x3 << 16)
-#define OMAP44XX_REG_NARROW_MODE_SHIFT			14
-#define OMAP44XX_REG_NARROW_MODE_MASK			(0x3 << 14)
-#define OMAP44XX_REG_CL_SHIFT				10
-#define OMAP44XX_REG_CL_MASK				(0xf << 10)
-#define OMAP44XX_REG_ROWSIZE_SHIFT			7
-#define OMAP44XX_REG_ROWSIZE_MASK			(0x7 << 7)
-#define OMAP44XX_REG_IBANK_SHIFT			4
-#define OMAP44XX_REG_IBANK_MASK				(0x7 << 4)
-#define OMAP44XX_REG_EBANK_SHIFT			3
-#define OMAP44XX_REG_EBANK_MASK				(1 << 3)
-#define OMAP44XX_REG_PAGESIZE_SHIFT			0
-#define OMAP44XX_REG_PAGESIZE_MASK			(0x7 << 0)
-
-/* SDRAM_CONFIG_2 */
-#define OMAP44XX_REG_CS1NVMEN_SHIFT			30
-#define OMAP44XX_REG_CS1NVMEN_MASK			(1 << 30)
-#define OMAP44XX_REG_EBANK_POS_SHIFT			27
-#define OMAP44XX_REG_EBANK_POS_MASK			(1 << 27)
-#define OMAP44XX_REG_RDBNUM_SHIFT			4
-#define OMAP44XX_REG_RDBNUM_MASK			(0x3 << 4)
-#define OMAP44XX_REG_RDBSIZE_SHIFT			0
-#define OMAP44XX_REG_RDBSIZE_MASK			(0x7 << 0)
-
-/* SDRAM_REF_CTRL */
-#define OMAP44XX_REG_INITREF_DIS_SHIFT			31
-#define OMAP44XX_REG_INITREF_DIS_MASK			(1 << 31)
-#define OMAP44XX_REG_SRT_SHIFT				29
-#define OMAP44XX_REG_SRT_MASK				(1 << 29)
-#define OMAP44XX_REG_ASR_SHIFT				28
-#define OMAP44XX_REG_ASR_MASK				(1 << 28)
-#define OMAP44XX_REG_PASR_SHIFT				24
-#define OMAP44XX_REG_PASR_MASK				(0x7 << 24)
-#define OMAP44XX_REG_REFRESH_RATE_SHIFT			0
-#define OMAP44XX_REG_REFRESH_RATE_MASK			(0xffff << 0)
-
-/* SDRAM_REF_CTRL_SHDW */
-#define OMAP44XX_REG_REFRESH_RATE_SHDW_SHIFT		0
-#define OMAP44XX_REG_REFRESH_RATE_SHDW_MASK		(0xffff << 0)
-
-/* SDRAM_TIM_1 */
-#define OMAP44XX_REG_T_RP_SHIFT				25
-#define OMAP44XX_REG_T_RP_MASK				(0xf << 25)
-#define OMAP44XX_REG_T_RCD_SHIFT			21
-#define OMAP44XX_REG_T_RCD_MASK				(0xf << 21)
-#define OMAP44XX_REG_T_WR_SHIFT				17
-#define OMAP44XX_REG_T_WR_MASK				(0xf << 17)
-#define OMAP44XX_REG_T_RAS_SHIFT			12
-#define OMAP44XX_REG_T_RAS_MASK				(0x1f << 12)
-#define OMAP44XX_REG_T_RC_SHIFT				6
-#define OMAP44XX_REG_T_RC_MASK				(0x3f << 6)
-#define OMAP44XX_REG_T_RRD_SHIFT			3
-#define OMAP44XX_REG_T_RRD_MASK				(0x7 << 3)
-#define OMAP44XX_REG_T_WTR_SHIFT			0
-#define OMAP44XX_REG_T_WTR_MASK				(0x7 << 0)
-
-/* SDRAM_TIM_1_SHDW */
-#define OMAP44XX_REG_T_RP_SHDW_SHIFT			25
-#define OMAP44XX_REG_T_RP_SHDW_MASK			(0xf << 25)
-#define OMAP44XX_REG_T_RCD_SHDW_SHIFT			21
-#define OMAP44XX_REG_T_RCD_SHDW_MASK			(0xf << 21)
-#define OMAP44XX_REG_T_WR_SHDW_SHIFT			17
-#define OMAP44XX_REG_T_WR_SHDW_MASK			(0xf << 17)
-#define OMAP44XX_REG_T_RAS_SHDW_SHIFT			12
-#define OMAP44XX_REG_T_RAS_SHDW_MASK			(0x1f << 12)
-#define OMAP44XX_REG_T_RC_SHDW_SHIFT			6
-#define OMAP44XX_REG_T_RC_SHDW_MASK			(0x3f << 6)
-#define OMAP44XX_REG_T_RRD_SHDW_SHIFT			3
-#define OMAP44XX_REG_T_RRD_SHDW_MASK			(0x7 << 3)
-#define OMAP44XX_REG_T_WTR_SHDW_SHIFT			0
-#define OMAP44XX_REG_T_WTR_SHDW_MASK			(0x7 << 0)
-
-/* SDRAM_TIM_2 */
-#define OMAP44XX_REG_T_XP_SHIFT				28
-#define OMAP44XX_REG_T_XP_MASK				(0x7 << 28)
-#define OMAP44XX_REG_T_ODT_SHIFT			25
-#define OMAP44XX_REG_T_ODT_MASK				(0x7 << 25)
-#define OMAP44XX_REG_T_XSNR_SHIFT			16
-#define OMAP44XX_REG_T_XSNR_MASK			(0x1ff << 16)
-#define OMAP44XX_REG_T_XSRD_SHIFT			6
-#define OMAP44XX_REG_T_XSRD_MASK			(0x3ff << 6)
-#define OMAP44XX_REG_T_RTP_SHIFT			3
-#define OMAP44XX_REG_T_RTP_MASK				(0x7 << 3)
-#define OMAP44XX_REG_T_CKE_SHIFT			0
-#define OMAP44XX_REG_T_CKE_MASK				(0x7 << 0)
-
-/* SDRAM_TIM_2_SHDW */
-#define OMAP44XX_REG_T_XP_SHDW_SHIFT			28
-#define OMAP44XX_REG_T_XP_SHDW_MASK			(0x7 << 28)
-#define OMAP44XX_REG_T_ODT_SHDW_SHIFT			25
-#define OMAP44XX_REG_T_ODT_SHDW_MASK			(0x7 << 25)
-#define OMAP44XX_REG_T_XSNR_SHDW_SHIFT			16
-#define OMAP44XX_REG_T_XSNR_SHDW_MASK			(0x1ff << 16)
-#define OMAP44XX_REG_T_XSRD_SHDW_SHIFT			6
-#define OMAP44XX_REG_T_XSRD_SHDW_MASK			(0x3ff << 6)
-#define OMAP44XX_REG_T_RTP_SHDW_SHIFT			3
-#define OMAP44XX_REG_T_RTP_SHDW_MASK			(0x7 << 3)
-#define OMAP44XX_REG_T_CKE_SHDW_SHIFT			0
-#define OMAP44XX_REG_T_CKE_SHDW_MASK			(0x7 << 0)
-
-/* SDRAM_TIM_3 */
-#define OMAP44XX_REG_T_CKESR_SHIFT			21
-#define OMAP44XX_REG_T_CKESR_MASK			(0x7 << 21)
-#define OMAP44XX_REG_ZQ_ZQCS_SHIFT			15
-#define OMAP44XX_REG_ZQ_ZQCS_MASK			(0x3f << 15)
-#define OMAP44XX_REG_T_TDQSCKMAX_SHIFT			13
-#define OMAP44XX_REG_T_TDQSCKMAX_MASK			(0x3 << 13)
-#define OMAP44XX_REG_T_RFC_SHIFT			4
-#define OMAP44XX_REG_T_RFC_MASK				(0x1ff << 4)
-#define OMAP44XX_REG_T_RAS_MAX_SHIFT			0
-#define OMAP44XX_REG_T_RAS_MAX_MASK			(0xf << 0)
-
-/* SDRAM_TIM_3_SHDW */
-#define OMAP44XX_REG_T_CKESR_SHDW_SHIFT			21
-#define OMAP44XX_REG_T_CKESR_SHDW_MASK			(0x7 << 21)
-#define OMAP44XX_REG_ZQ_ZQCS_SHDW_SHIFT			15
-#define OMAP44XX_REG_ZQ_ZQCS_SHDW_MASK			(0x3f << 15)
-#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_SHIFT		13
-#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_MASK		(0x3 << 13)
-#define OMAP44XX_REG_T_RFC_SHDW_SHIFT			4
-#define OMAP44XX_REG_T_RFC_SHDW_MASK			(0x1ff << 4)
-#define OMAP44XX_REG_T_RAS_MAX_SHDW_SHIFT		0
-#define OMAP44XX_REG_T_RAS_MAX_SHDW_MASK		(0xf << 0)
-
-/* LPDDR2_NVM_TIM */
-#define OMAP44XX_REG_NVM_T_XP_SHIFT			28
-#define OMAP44XX_REG_NVM_T_XP_MASK			(0x7 << 28)
-#define OMAP44XX_REG_NVM_T_WTR_SHIFT			24
-#define OMAP44XX_REG_NVM_T_WTR_MASK			(0x7 << 24)
-#define OMAP44XX_REG_NVM_T_RP_SHIFT			20
-#define OMAP44XX_REG_NVM_T_RP_MASK			(0xf << 20)
-#define OMAP44XX_REG_NVM_T_WRA_SHIFT			16
-#define OMAP44XX_REG_NVM_T_WRA_MASK			(0xf << 16)
-#define OMAP44XX_REG_NVM_T_RRD_SHIFT			8
-#define OMAP44XX_REG_NVM_T_RRD_MASK			(0xff << 8)
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHIFT			0
-#define OMAP44XX_REG_NVM_T_RCDMIN_MASK			(0xff << 0)
-
-/* LPDDR2_NVM_TIM_SHDW */
-#define OMAP44XX_REG_NVM_T_XP_SHDW_SHIFT		28
-#define OMAP44XX_REG_NVM_T_XP_SHDW_MASK			(0x7 << 28)
-#define OMAP44XX_REG_NVM_T_WTR_SHDW_SHIFT		24
-#define OMAP44XX_REG_NVM_T_WTR_SHDW_MASK		(0x7 << 24)
-#define OMAP44XX_REG_NVM_T_RP_SHDW_SHIFT		20
-#define OMAP44XX_REG_NVM_T_RP_SHDW_MASK			(0xf << 20)
-#define OMAP44XX_REG_NVM_T_WRA_SHDW_SHIFT		16
-#define OMAP44XX_REG_NVM_T_WRA_SHDW_MASK		(0xf << 16)
-#define OMAP44XX_REG_NVM_T_RRD_SHDW_SHIFT		8
-#define OMAP44XX_REG_NVM_T_RRD_SHDW_MASK		(0xff << 8)
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_SHIFT		0
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_MASK		(0xff << 0)
-
-/* PWR_MGMT_CTRL */
-#define OMAP44XX_REG_IDLEMODE_SHIFT			30
-#define OMAP44XX_REG_IDLEMODE_MASK			(0x3 << 30)
-#define OMAP44XX_REG_PD_TIM_SHIFT			12
-#define OMAP44XX_REG_PD_TIM_MASK			(0xf << 12)
-#define OMAP44XX_REG_DPD_EN_SHIFT			11
-#define OMAP44XX_REG_DPD_EN_MASK			(1 << 11)
-#define OMAP44XX_REG_LP_MODE_SHIFT			8
-#define OMAP44XX_REG_LP_MODE_MASK			(0x7 << 8)
-#define OMAP44XX_REG_SR_TIM_SHIFT			4
-#define OMAP44XX_REG_SR_TIM_MASK			(0xf << 4)
-#define OMAP44XX_REG_CS_TIM_SHIFT			0
-#define OMAP44XX_REG_CS_TIM_MASK			(0xf << 0)
-
-/* PWR_MGMT_CTRL_SHDW */
-#define OMAP44XX_REG_PD_TIM_SHDW_SHIFT			8
-#define OMAP44XX_REG_PD_TIM_SHDW_MASK			(0xf << 8)
-#define OMAP44XX_REG_SR_TIM_SHDW_SHIFT			4
-#define OMAP44XX_REG_SR_TIM_SHDW_MASK			(0xf << 4)
-#define OMAP44XX_REG_CS_TIM_SHDW_SHIFT			0
-#define OMAP44XX_REG_CS_TIM_SHDW_MASK			(0xf << 0)
-
-/* LPDDR2_MODE_REG_DATA */
-#define OMAP44XX_REG_VALUE_0_SHIFT			0
-#define OMAP44XX_REG_VALUE_0_MASK			(0x7f << 0)
-
-/* LPDDR2_MODE_REG_CFG */
-#define OMAP44XX_REG_CS_SHIFT				31
-#define OMAP44XX_REG_CS_MASK				(1 << 31)
-#define OMAP44XX_REG_REFRESH_EN_SHIFT			30
-#define OMAP44XX_REG_REFRESH_EN_MASK			(1 << 30)
-#define OMAP44XX_REG_ADDRESS_SHIFT			0
-#define OMAP44XX_REG_ADDRESS_MASK			(0xff << 0)
-
-/* OCP_CONFIG */
-#define OMAP44XX_REG_SYS_THRESH_MAX_SHIFT		24
-#define OMAP44XX_REG_SYS_THRESH_MAX_MASK		(0xf << 24)
-#define OMAP44XX_REG_MPU_THRESH_MAX_SHIFT		20
-#define OMAP44XX_REG_MPU_THRESH_MAX_MASK		(0xf << 20)
-#define OMAP44XX_REG_LL_THRESH_MAX_SHIFT		16
-#define OMAP44XX_REG_LL_THRESH_MAX_MASK			(0xf << 16)
-#define OMAP44XX_REG_PR_OLD_COUNT_SHIFT			0
-#define OMAP44XX_REG_PR_OLD_COUNT_MASK			(0xff << 0)
-
-/* OCP_CFG_VAL_1 */
-#define OMAP44XX_REG_SYS_BUS_WIDTH_SHIFT		30
-#define OMAP44XX_REG_SYS_BUS_WIDTH_MASK			(0x3 << 30)
-#define OMAP44XX_REG_LL_BUS_WIDTH_SHIFT			28
-#define OMAP44XX_REG_LL_BUS_WIDTH_MASK			(0x3 << 28)
-#define OMAP44XX_REG_WR_FIFO_DEPTH_SHIFT		8
-#define OMAP44XX_REG_WR_FIFO_DEPTH_MASK			(0xff << 8)
-#define OMAP44XX_REG_CMD_FIFO_DEPTH_SHIFT		0
-#define OMAP44XX_REG_CMD_FIFO_DEPTH_MASK		(0xff << 0)
-
-/* OCP_CFG_VAL_2 */
-#define OMAP44XX_REG_RREG_FIFO_DEPTH_SHIFT		16
-#define OMAP44XX_REG_RREG_FIFO_DEPTH_MASK		(0xff << 16)
-#define OMAP44XX_REG_RSD_FIFO_DEPTH_SHIFT		8
-#define OMAP44XX_REG_RSD_FIFO_DEPTH_MASK		(0xff << 8)
-#define OMAP44XX_REG_RCMD_FIFO_DEPTH_SHIFT		0
-#define OMAP44XX_REG_RCMD_FIFO_DEPTH_MASK		(0xff << 0)
-
-/* IODFT_TLGC */
-#define OMAP44XX_REG_TLEC_SHIFT				16
-#define OMAP44XX_REG_TLEC_MASK				(0xffff << 16)
-#define OMAP44XX_REG_MT_SHIFT				14
-#define OMAP44XX_REG_MT_MASK				(1 << 14)
-#define OMAP44XX_REG_ACT_CAP_EN_SHIFT			13
-#define OMAP44XX_REG_ACT_CAP_EN_MASK			(1 << 13)
-#define OMAP44XX_REG_OPG_LD_SHIFT			12
-#define OMAP44XX_REG_OPG_LD_MASK			(1 << 12)
-#define OMAP44XX_REG_RESET_PHY_SHIFT			10
-#define OMAP44XX_REG_RESET_PHY_MASK			(1 << 10)
-#define OMAP44XX_REG_MMS_SHIFT				8
-#define OMAP44XX_REG_MMS_MASK				(1 << 8)
-#define OMAP44XX_REG_MC_SHIFT				4
-#define OMAP44XX_REG_MC_MASK				(0x3 << 4)
-#define OMAP44XX_REG_PC_SHIFT				1
-#define OMAP44XX_REG_PC_MASK				(0x7 << 1)
-#define OMAP44XX_REG_TM_SHIFT				0
-#define OMAP44XX_REG_TM_MASK				(1 << 0)
-
-/* IODFT_CTRL_MISR_RSLT */
-#define OMAP44XX_REG_DQM_TLMR_SHIFT			16
-#define OMAP44XX_REG_DQM_TLMR_MASK			(0x3ff << 16)
-#define OMAP44XX_REG_CTL_TLMR_SHIFT			0
-#define OMAP44XX_REG_CTL_TLMR_MASK			(0x7ff << 0)
-
-/* IODFT_ADDR_MISR_RSLT */
-#define OMAP44XX_REG_ADDR_TLMR_SHIFT			0
-#define OMAP44XX_REG_ADDR_TLMR_MASK			(0x1fffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_1 */
-#define OMAP44XX_REG_DATA_TLMR_31_0_SHIFT		0
-#define OMAP44XX_REG_DATA_TLMR_31_0_MASK		(0xffffffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_2 */
-#define OMAP44XX_REG_DATA_TLMR_63_32_SHIFT		0
-#define OMAP44XX_REG_DATA_TLMR_63_32_MASK		(0xffffffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_3 */
-#define OMAP44XX_REG_DATA_TLMR_66_64_SHIFT		0
-#define OMAP44XX_REG_DATA_TLMR_66_64_MASK		(0x7 << 0)
-
-/* PERF_CNT_1 */
-#define OMAP44XX_REG_COUNTER1_SHIFT			0
-#define OMAP44XX_REG_COUNTER1_MASK			(0xffffffff << 0)
-
-/* PERF_CNT_2 */
-#define OMAP44XX_REG_COUNTER2_SHIFT			0
-#define OMAP44XX_REG_COUNTER2_MASK			(0xffffffff << 0)
-
-/* PERF_CNT_CFG */
-#define OMAP44XX_REG_CNTR2_MCONNID_EN_SHIFT		31
-#define OMAP44XX_REG_CNTR2_MCONNID_EN_MASK		(1 << 31)
-#define OMAP44XX_REG_CNTR2_REGION_EN_SHIFT		30
-#define OMAP44XX_REG_CNTR2_REGION_EN_MASK		(1 << 30)
-#define OMAP44XX_REG_CNTR2_CFG_SHIFT			16
-#define OMAP44XX_REG_CNTR2_CFG_MASK			(0xf << 16)
-#define OMAP44XX_REG_CNTR1_MCONNID_EN_SHIFT		15
-#define OMAP44XX_REG_CNTR1_MCONNID_EN_MASK		(1 << 15)
-#define OMAP44XX_REG_CNTR1_REGION_EN_SHIFT		14
-#define OMAP44XX_REG_CNTR1_REGION_EN_MASK		(1 << 14)
-#define OMAP44XX_REG_CNTR1_CFG_SHIFT			0
-#define OMAP44XX_REG_CNTR1_CFG_MASK			(0xf << 0)
-
-/* PERF_CNT_SEL */
-#define OMAP44XX_REG_MCONNID2_SHIFT			24
-#define OMAP44XX_REG_MCONNID2_MASK			(0xff << 24)
-#define OMAP44XX_REG_REGION_SEL2_SHIFT			16
-#define OMAP44XX_REG_REGION_SEL2_MASK			(0x3 << 16)
-#define OMAP44XX_REG_MCONNID1_SHIFT			8
-#define OMAP44XX_REG_MCONNID1_MASK			(0xff << 8)
-#define OMAP44XX_REG_REGION_SEL1_SHIFT			0
-#define OMAP44XX_REG_REGION_SEL1_MASK			(0x3 << 0)
-
-/* PERF_CNT_TIM */
-#define OMAP44XX_REG_TOTAL_TIME_SHIFT			0
-#define OMAP44XX_REG_TOTAL_TIME_MASK			(0xffffffff << 0)
-
-/* READ_IDLE_CTRL */
-#define OMAP44XX_REG_READ_IDLE_LEN_SHIFT		16
-#define OMAP44XX_REG_READ_IDLE_LEN_MASK			(0xf << 16)
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT		0
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_MASK		(0x1ff << 0)
-
-/* READ_IDLE_CTRL_SHDW */
-#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_SHIFT		16
-#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_MASK		(0xf << 16)
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_SHIFT	0
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_MASK	(0x1ff << 0)
-
-/* IRQ_EOI */
-#define OMAP44XX_REG_EOI_SHIFT				0
-#define OMAP44XX_REG_EOI_MASK				(1 << 0)
-
-/* IRQSTATUS_RAW_SYS */
-#define OMAP44XX_REG_DNV_SYS_SHIFT			2
-#define OMAP44XX_REG_DNV_SYS_MASK			(1 << 2)
-#define OMAP44XX_REG_TA_SYS_SHIFT			1
-#define OMAP44XX_REG_TA_SYS_MASK			(1 << 1)
-#define OMAP44XX_REG_ERR_SYS_SHIFT			0
-#define OMAP44XX_REG_ERR_SYS_MASK			(1 << 0)
-
-/* IRQSTATUS_RAW_LL */
-#define OMAP44XX_REG_DNV_LL_SHIFT			2
-#define OMAP44XX_REG_DNV_LL_MASK			(1 << 2)
-#define OMAP44XX_REG_TA_LL_SHIFT			1
-#define OMAP44XX_REG_TA_LL_MASK				(1 << 1)
-#define OMAP44XX_REG_ERR_LL_SHIFT			0
-#define OMAP44XX_REG_ERR_LL_MASK			(1 << 0)
-
-/* IRQSTATUS_SYS */
-
-/* IRQSTATUS_LL */
-
-/* IRQENABLE_SET_SYS */
-#define OMAP44XX_REG_EN_DNV_SYS_SHIFT			2
-#define OMAP44XX_REG_EN_DNV_SYS_MASK			(1 << 2)
-#define OMAP44XX_REG_EN_TA_SYS_SHIFT			1
-#define OMAP44XX_REG_EN_TA_SYS_MASK			(1 << 1)
-#define OMAP44XX_REG_EN_ERR_SYS_SHIFT			0
-#define OMAP44XX_REG_EN_ERR_SYS_MASK			(1 << 0)
-
-/* IRQENABLE_SET_LL */
-#define OMAP44XX_REG_EN_DNV_LL_SHIFT			2
-#define OMAP44XX_REG_EN_DNV_LL_MASK			(1 << 2)
-#define OMAP44XX_REG_EN_TA_LL_SHIFT			1
-#define OMAP44XX_REG_EN_TA_LL_MASK			(1 << 1)
-#define OMAP44XX_REG_EN_ERR_LL_SHIFT			0
-#define OMAP44XX_REG_EN_ERR_LL_MASK			(1 << 0)
-
-/* IRQENABLE_CLR_SYS */
-
-/* IRQENABLE_CLR_LL */
-
-/* ZQ_CONFIG */
-#define OMAP44XX_REG_ZQ_CS1EN_SHIFT			31
-#define OMAP44XX_REG_ZQ_CS1EN_MASK			(1 << 31)
-#define OMAP44XX_REG_ZQ_CS0EN_SHIFT			30
-#define OMAP44XX_REG_ZQ_CS0EN_MASK			(1 << 30)
-#define OMAP44XX_REG_ZQ_DUALCALEN_SHIFT			29
-#define OMAP44XX_REG_ZQ_DUALCALEN_MASK			(1 << 29)
-#define OMAP44XX_REG_ZQ_SFEXITEN_SHIFT			28
-#define OMAP44XX_REG_ZQ_SFEXITEN_MASK			(1 << 28)
-#define OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT		18
-#define OMAP44XX_REG_ZQ_ZQINIT_MULT_MASK		(0x3 << 18)
-#define OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT			16
-#define OMAP44XX_REG_ZQ_ZQCL_MULT_MASK			(0x3 << 16)
-#define OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT		0
-#define OMAP44XX_REG_ZQ_REFINTERVAL_MASK		(0xffff << 0)
-
-/* TEMP_ALERT_CONFIG */
-#define OMAP44XX_REG_TA_CS1EN_SHIFT			31
-#define OMAP44XX_REG_TA_CS1EN_MASK			(1 << 31)
-#define OMAP44XX_REG_TA_CS0EN_SHIFT			30
-#define OMAP44XX_REG_TA_CS0EN_MASK			(1 << 30)
-#define OMAP44XX_REG_TA_SFEXITEN_SHIFT			28
-#define OMAP44XX_REG_TA_SFEXITEN_MASK			(1 << 28)
-#define OMAP44XX_REG_TA_DEVWDT_SHIFT			26
-#define OMAP44XX_REG_TA_DEVWDT_MASK			(0x3 << 26)
-#define OMAP44XX_REG_TA_DEVCNT_SHIFT			24
-#define OMAP44XX_REG_TA_DEVCNT_MASK			(0x3 << 24)
-#define OMAP44XX_REG_TA_REFINTERVAL_SHIFT		0
-#define OMAP44XX_REG_TA_REFINTERVAL_MASK		(0x3fffff << 0)
-
-/* OCP_ERR_LOG */
-#define OMAP44XX_REG_MADDRSPACE_SHIFT			14
-#define OMAP44XX_REG_MADDRSPACE_MASK			(0x3 << 14)
-#define OMAP44XX_REG_MBURSTSEQ_SHIFT			11
-#define OMAP44XX_REG_MBURSTSEQ_MASK			(0x7 << 11)
-#define OMAP44XX_REG_MCMD_SHIFT				8
-#define OMAP44XX_REG_MCMD_MASK				(0x7 << 8)
-#define OMAP44XX_REG_MCONNID_SHIFT			0
-#define OMAP44XX_REG_MCONNID_MASK			(0xff << 0)
-
-/* DDR_PHY_CTRL_1 */
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHIFT		4
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_MASK		(0xfffffff << 4)
-#define OMAP44XX_REG_READ_LATENCY_SHIFT			0
-#define OMAP44XX_REG_READ_LATENCY_MASK			(0xf << 0)
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT		4
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_MASK		(0xFF << 4)
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT	12
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK	(0xFFFFF << 12)
-
-/* DDR_PHY_CTRL_1_SHDW */
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_SHIFT		4
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_MASK		(0xfffffff << 4)
-#define OMAP44XX_REG_READ_LATENCY_SHDW_SHIFT		0
-#define OMAP44XX_REG_READ_LATENCY_SHDW_MASK		(0xf << 0)
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT	4
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK	(0xFF << 4)
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK	(0xFFFFF << 12)
-
-/* DDR_PHY_CTRL_2 */
-#define OMAP44XX_REG_DDR_PHY_CTRL_2_SHIFT		0
-#define OMAP44XX_REG_DDR_PHY_CTRL_2_MASK		(0xffffffff << 0)
-
-/* DMM */
-#define OMAP44XX_DMM_LISA_MAP_BASE	0x4E000040
-
-/* Memory Adapter (4460 onwards) */
-#define OMAP44XX_MA_LISA_MAP_BASE		0x482AF040
-
-/* DMM_LISA_MAP */
-#define OMAP44XX_SYS_ADDR_SHIFT		24
-#define OMAP44XX_SYS_ADDR_MASK		(0xff << 24)
-#define OMAP44XX_SYS_SIZE_SHIFT		20
-#define OMAP44XX_SYS_SIZE_MASK		(0x7 << 20)
-#define OMAP44XX_SDRC_INTL_SHIFT	18
-#define OMAP44XX_SDRC_INTL_MASK		(0x3 << 18)
-#define OMAP44XX_SDRC_ADDRSPC_SHIFT	16
-#define OMAP44XX_SDRC_ADDRSPC_MASK	(0x3 << 16)
-#define OMAP44XX_SDRC_MAP_SHIFT		8
-#define OMAP44XX_SDRC_MAP_MASK		(0x3 << 8)
-#define OMAP44XX_SDRC_ADDR_SHIFT	0
-#define OMAP44XX_SDRC_ADDR_MASK		(0xff << 0)
-
-/* DMM_LISA_MAP fields */
-#define DMM_SDRC_MAP_UNMAPPED		0
-#define DMM_SDRC_MAP_EMIF1_ONLY		1
-#define DMM_SDRC_MAP_EMIF2_ONLY		2
-#define DMM_SDRC_MAP_EMIF1_AND_EMIF2	3
-
-#define DMM_SDRC_INTL_NONE		0
-#define DMM_SDRC_INTL_128B		1
-#define DMM_SDRC_INTL_256B		2
-#define DMM_SDRC_INTL_512		3
-
-#define DMM_SDRC_ADDR_SPC_SDRAM		0
-#define DMM_SDRC_ADDR_SPC_NVM		1
-#define DMM_SDRC_ADDR_SPC_INVALID	2
-
-#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL		(\
-	(DMM_SDRC_MAP_EMIF1_AND_EMIF2 << OMAP44XX_SDRC_MAP_SHIFT) |\
-	(DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT) |\
-	(DMM_SDRC_INTL_128B << OMAP44XX_SDRC_INTL_SHIFT) |\
-	(CONFIG_SYS_SDRAM_BASE << OMAP44XX_SYS_ADDR_SHIFT))
-
-#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL	(\
-	(DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
-	(DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
-	(DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT))
-
-#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL	(\
-	(DMM_SDRC_MAP_EMIF2_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
-	(DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
-	(DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT))
-
-/* Trap for invalid TILER PAT entries */
-#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP		(\
-	(0  << OMAP44XX_SDRC_ADDR_SHIFT) |\
-	(DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
-	(DMM_SDRC_ADDR_SPC_INVALID << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
-	(DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT)|\
-	(0xFF << OMAP44XX_SYS_ADDR_SHIFT))
-
-
-/* Reg mapping structure */
-struct emif_reg_struct {
-	u32 emif_mod_id_rev;
-	u32 emif_status;
-	u32 emif_sdram_config;
-	u32 emif_lpddr2_nvm_config;
-	u32 emif_sdram_ref_ctrl;
-	u32 emif_sdram_ref_ctrl_shdw;
-	u32 emif_sdram_tim_1;
-	u32 emif_sdram_tim_1_shdw;
-	u32 emif_sdram_tim_2;
-	u32 emif_sdram_tim_2_shdw;
-	u32 emif_sdram_tim_3;
-	u32 emif_sdram_tim_3_shdw;
-	u32 emif_lpddr2_nvm_tim;
-	u32 emif_lpddr2_nvm_tim_shdw;
-	u32 emif_pwr_mgmt_ctrl;
-	u32 emif_pwr_mgmt_ctrl_shdw;
-	u32 emif_lpddr2_mode_reg_data;
-	u32 padding1[1];
-	u32 emif_lpddr2_mode_reg_data_es2;
-	u32 padding11[1];
-	u32 emif_lpddr2_mode_reg_cfg;
-	u32 emif_l3_config;
-	u32 emif_l3_cfg_val_1;
-	u32 emif_l3_cfg_val_2;
-	u32 emif_iodft_tlgc;
-	u32 padding2[7];
-	u32 emif_perf_cnt_1;
-	u32 emif_perf_cnt_2;
-	u32 emif_perf_cnt_cfg;
-	u32 emif_perf_cnt_sel;
-	u32 emif_perf_cnt_tim;
-	u32 padding3;
-	u32 emif_read_idlectrl;
-	u32 emif_read_idlectrl_shdw;
-	u32 padding4;
-	u32 emif_irqstatus_raw_sys;
-	u32 emif_irqstatus_raw_ll;
-	u32 emif_irqstatus_sys;
-	u32 emif_irqstatus_ll;
-	u32 emif_irqenable_set_sys;
-	u32 emif_irqenable_set_ll;
-	u32 emif_irqenable_clr_sys;
-	u32 emif_irqenable_clr_ll;
-	u32 padding5;
-	u32 emif_zq_config;
-	u32 emif_temp_alert_config;
-	u32 emif_l3_err_log;
-	u32 padding6[4];
-	u32 emif_ddr_phy_ctrl_1;
-	u32 emif_ddr_phy_ctrl_1_shdw;
-	u32 emif_ddr_phy_ctrl_2;
-};
-
-struct dmm_lisa_map_regs {
-	u32 dmm_lisa_map_0;
-	u32 dmm_lisa_map_1;
-	u32 dmm_lisa_map_2;
-	u32 dmm_lisa_map_3;
-};
-
-#define CS0	0
-#define CS1	1
-/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
-#define MAX_LPDDR2_FREQ	400000000	/* 400 MHz */
-
-/*
- * The period of DDR clk is represented as numerator and denominator for
- * better accuracy in integer based calculations. However, if the numerator
- * and denominator are very huge there may be chances of overflow in
- * calculations. So, as a trade-off keep denominator(and consequently
- * numerator) within a limit sacrificing some accuracy - but not much
- * If denominator and numerator are already small (such as at 400 MHz)
- * no adjustment is needed
- */
-#define EMIF_PERIOD_DEN_LIMIT	1000
-/*
- * Maximum number of different frequencies supported by EMIF driver
- * Determines the number of entries in the pointer array for register
- * cache
- */
-#define EMIF_MAX_NUM_FREQUENCIES	6
-/*
- * Indices into the Addressing Table array.
- * One entry each for all the different types of devices with different
- * addressing schemes
- */
-#define ADDR_TABLE_INDEX64M	0
-#define ADDR_TABLE_INDEX128M	1
-#define ADDR_TABLE_INDEX256M	2
-#define ADDR_TABLE_INDEX512M	3
-#define ADDR_TABLE_INDEX1GS4	4
-#define ADDR_TABLE_INDEX2GS4	5
-#define ADDR_TABLE_INDEX4G	6
-#define ADDR_TABLE_INDEX8G	7
-#define ADDR_TABLE_INDEX1GS2	8
-#define ADDR_TABLE_INDEX2GS2	9
-#define ADDR_TABLE_INDEXMAX	10
-
-/* Number of Row bits */
-#define ROW_9  0
-#define ROW_10 1
-#define ROW_11 2
-#define ROW_12 3
-#define ROW_13 4
-#define ROW_14 5
-#define ROW_15 6
-#define ROW_16 7
-
-/* Number of Column bits */
-#define COL_8   0
-#define COL_9   1
-#define COL_10  2
-#define COL_11  3
-#define COL_7   4 /*Not supported by OMAP included for completeness */
-
-/* Number of Banks*/
-#define BANKS1 0
-#define BANKS2 1
-#define BANKS4 2
-#define BANKS8 3
-
-/* Refresh rate in micro seconds x 10 */
-#define T_REFI_15_6	156
-#define T_REFI_7_8	78
-#define T_REFI_3_9	39
-
-#define EBANK_CS1_DIS	0
-#define EBANK_CS1_EN	1
-
-/* Read Latency used by the device at reset */
-#define RL_BOOT		3
-/* Read Latency for the highest frequency you want to use */
-#define RL_FINAL	6
-
-/* Interleaving policies at EMIF level- between banks and Chip Selects */
-#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING	0
-#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING	3
-
-/*
- * Interleaving policy to be used
- * Currently set to MAX interleaving for better performance
- */
-#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING
-
-/* State of the core voltage:
- * This is important for some parameters such as read idle control and
- * ZQ calibration timings. Timings are much stricter when voltage ramp
- * is happening compared to when the voltage is stable.
- * We need to calculate two sets of values for these parameters and use
- * them accordingly
- */
-#define LPDDR2_VOLTAGE_STABLE	0
-#define LPDDR2_VOLTAGE_RAMPING	1
-
-/* Length of the forced read idle period in terms of cycles */
-#define EMIF_REG_READ_IDLE_LEN_VAL	5
-
-/* Interval between forced 'read idles' */
-/* To be used when voltage is changed for DPS/DVFS - 1us */
-#define READ_IDLE_INTERVAL_DVFS		(1*1000)
-/*
- * To be used when voltage is not scaled except by Smart Reflex
- * 50us - or maximum value will do
- */
-#define READ_IDLE_INTERVAL_NORMAL	(50*1000)
-
-
-/*
- * Unless voltage is changing due to DVFS one ZQCS command every 50ms should
- * be enough. This shoule be enough also in the case when voltage is changing
- * due to smart-reflex.
- */
-#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US	(50*1000)
-/*
- * If voltage is changing due to DVFS ZQCS should be performed more
- * often(every 50us)
- */
-#define EMIF_ZQCS_INTERVAL_DVFS_IN_US	50
-
-/* The interval between ZQCL commands as a multiple of ZQCS interval */
-#define REG_ZQ_ZQCL_MULT		4
-/* The interval between ZQINIT commands as a multiple of ZQCL interval */
-#define REG_ZQ_ZQINIT_MULT		3
-/* Enable ZQ Calibration on exiting Self-refresh */
-#define REG_ZQ_SFEXITEN_ENABLE		1
-/*
- * ZQ Calibration simultaneously on both chip-selects:
- * Needs one calibration resistor per CS
- * None of the boards that we know of have this capability
- * So disabled by default
- */
-#define REG_ZQ_DUALCALEN_DISABLE	0
-/*
- * Enable ZQ Calibration by default on CS0. If we are asked to program
- * the EMIF there will be something connected to CS0 for sure
- */
-#define REG_ZQ_CS0EN_ENABLE		1
-
-/* EMIF_PWR_MGMT_CTRL register */
-/* Low power modes */
-#define LP_MODE_DISABLE		0
-#define LP_MODE_CLOCK_STOP	1
-#define LP_MODE_SELF_REFRESH	2
-#define LP_MODE_PWR_DN		3
-
-/* REG_DPD_EN */
-#define DPD_DISABLE	0
-#define DPD_ENABLE	1
-
-/* Maximum delay before Low Power Modes */
-#define REG_CS_TIM		0xF
-#define REG_SR_TIM		0xF
-#define REG_PD_TIM		0xF
-
-/* EMIF_PWR_MGMT_CTRL register */
-#define EMIF_PWR_MGMT_CTRL (\
-	((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHIFT) & OMAP44XX_REG_CS_TIM_MASK)|\
-	((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHIFT) & OMAP44XX_REG_SR_TIM_MASK)|\
-	((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\
-	((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\
-	((LP_MODE_DISABLE << OMAP44XX_REG_LP_MODE_SHIFT)\
-			& OMAP44XX_REG_LP_MODE_MASK) |\
-	((DPD_DISABLE << OMAP44XX_REG_DPD_EN_SHIFT)\
-			& OMAP44XX_REG_DPD_EN_MASK))\
-
-#define EMIF_PWR_MGMT_CTRL_SHDW (\
-	((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHDW_SHIFT)\
-			& OMAP44XX_REG_CS_TIM_SHDW_MASK) |\
-	((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHDW_SHIFT)\
-			& OMAP44XX_REG_SR_TIM_SHDW_MASK) |\
-	((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\
-			& OMAP44XX_REG_PD_TIM_SHDW_MASK) |\
-	((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\
-			& OMAP44XX_REG_PD_TIM_SHDW_MASK))
-
-/* EMIF_L3_CONFIG register value */
-#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0	0x0A0000FF
-#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0	0x0A300000
-/*
- * Value of bits 12:31 of DDR_PHY_CTRL_1 register:
- * All these fields have magic values dependent on frequency and
- * determined by PHY and DLL integration with EMIF. Setting the magic
- * values suggested by hw team.
- */
-#define EMIF_DDR_PHY_CTRL_1_BASE_VAL			0x049FF
-#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ			0x41
-#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ			0x80
-#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS	0xFF
-
-/*
-* MR1 value:
-* Burst length	: 8
-* Burst type	: sequential
-* Wrap		: enabled
-* nWR		: 3(default). EMIF does not do pre-charge.
-*		: So nWR is don't care
-*/
-#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3	0x23
-
-/* MR2 */
-#define MR2_RL3_WL1			1
-#define MR2_RL4_WL2			2
-#define MR2_RL5_WL2			3
-#define MR2_RL6_WL3			4
-
-/* MR10: ZQ calibration codes */
-#define MR10_ZQ_ZQCS		0x56
-#define MR10_ZQ_ZQCL		0xAB
-#define MR10_ZQ_ZQINIT		0xFF
-#define MR10_ZQ_ZQRESET		0xC3
-
-/* TEMP_ALERT_CONFIG */
-#define TEMP_ALERT_POLL_INTERVAL_MS	360 /* for temp gradient - 5 C/s */
-#define TEMP_ALERT_CONFIG_DEVCT_1	0
-#define TEMP_ALERT_CONFIG_DEVWDT_32	2
-
-/* MR16 value: refresh full array(no partial array self refresh) */
-#define MR16_REF_FULL_ARRAY	0
-
-/*
- * Maximum number of entries we keep in our array of timing tables
- * We need not keep all the speed bins supported by the device
- * We need to keep timing tables for only the speed bins that we
- * are interested in
- */
-#define MAX_NUM_SPEEDBINS	4
-
-/* LPDDR2 Densities */
-#define LPDDR2_DENSITY_64Mb	0
-#define LPDDR2_DENSITY_128Mb	1
-#define LPDDR2_DENSITY_256Mb	2
-#define LPDDR2_DENSITY_512Mb	3
-#define LPDDR2_DENSITY_1Gb	4
-#define LPDDR2_DENSITY_2Gb	5
-#define LPDDR2_DENSITY_4Gb	6
-#define LPDDR2_DENSITY_8Gb	7
-#define LPDDR2_DENSITY_16Gb	8
-#define LPDDR2_DENSITY_32Gb	9
-
-/* LPDDR2 type */
-#define	LPDDR2_TYPE_S4	0
-#define	LPDDR2_TYPE_S2	1
-#define	LPDDR2_TYPE_NVM	2
-
-/* LPDDR2 IO width */
-#define	LPDDR2_IO_WIDTH_32	0
-#define	LPDDR2_IO_WIDTH_16	1
-#define	LPDDR2_IO_WIDTH_8	2
-
-/* Mode register numbers */
-#define LPDDR2_MR0	0
-#define LPDDR2_MR1	1
-#define LPDDR2_MR2	2
-#define LPDDR2_MR3	3
-#define LPDDR2_MR4	4
-#define LPDDR2_MR5	5
-#define LPDDR2_MR6	6
-#define LPDDR2_MR7	7
-#define LPDDR2_MR8	8
-#define LPDDR2_MR9	9
-#define LPDDR2_MR10	10
-#define LPDDR2_MR11	11
-#define LPDDR2_MR16	16
-#define LPDDR2_MR17	17
-#define LPDDR2_MR18	18
-
-/* MR0 */
-#define LPDDR2_MR0_DAI_SHIFT	0
-#define LPDDR2_MR0_DAI_MASK	1
-#define LPDDR2_MR0_DI_SHIFT	1
-#define LPDDR2_MR0_DI_MASK	(1 << 1)
-#define LPDDR2_MR0_DNVI_SHIFT	2
-#define LPDDR2_MR0_DNVI_MASK	(1 << 2)
-
-/* MR4 */
-#define MR4_SDRAM_REF_RATE_SHIFT	0
-#define MR4_SDRAM_REF_RATE_MASK		7
-#define MR4_TUF_SHIFT			7
-#define MR4_TUF_MASK			(1 << 7)
-
-/* MR4 SDRAM Refresh Rate field values */
-#define SDRAM_TEMP_LESS_LOW_SHUTDOWN			0x0
-#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS		0x1
-#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS		0x2
-#define SDRAM_TEMP_NOMINAL				0x3
-#define SDRAM_TEMP_RESERVED_4				0x4
-#define SDRAM_TEMP_HIGH_DERATE_REFRESH			0x5
-#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS	0x6
-#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN			0x7
-
-#define LPDDR2_MANUFACTURER_SAMSUNG	1
-#define LPDDR2_MANUFACTURER_QIMONDA	2
-#define LPDDR2_MANUFACTURER_ELPIDA	3
-#define LPDDR2_MANUFACTURER_ETRON	4
-#define LPDDR2_MANUFACTURER_NANYA	5
-#define LPDDR2_MANUFACTURER_HYNIX	6
-#define LPDDR2_MANUFACTURER_MOSEL	7
-#define LPDDR2_MANUFACTURER_WINBOND	8
-#define LPDDR2_MANUFACTURER_ESMT	9
-#define LPDDR2_MANUFACTURER_SPANSION 11
-#define LPDDR2_MANUFACTURER_SST		12
-#define LPDDR2_MANUFACTURER_ZMOS	13
-#define LPDDR2_MANUFACTURER_INTEL	14
-#define LPDDR2_MANUFACTURER_NUMONYX	254
-#define LPDDR2_MANUFACTURER_MICRON	255
-
-/* MR8 register fields */
-#define MR8_TYPE_SHIFT		0x0
-#define MR8_TYPE_MASK		0x3
-#define MR8_DENSITY_SHIFT	0x2
-#define MR8_DENSITY_MASK	(0xF << 0x2)
-#define MR8_IO_WIDTH_SHIFT	0x6
-#define MR8_IO_WIDTH_MASK	(0x3 << 0x6)
-
-struct lpddr2_addressing {
-	u8	num_banks;
-	u8	t_REFI_us_x10;
-	u8	row_sz[2]; /* One entry each for x32 and x16 */
-	u8	col_sz[2]; /* One entry each for x32 and x16 */
-};
-
-/* Structure for timings from the DDR datasheet */
-struct lpddr2_ac_timings {
-	u32 max_freq;
-	u8 RL;
-	u8 tRPab;
-	u8 tRCD;
-	u8 tWR;
-	u8 tRASmin;
-	u8 tRRD;
-	u8 tWTRx2;
-	u8 tXSR;
-	u8 tXPx2;
-	u8 tRFCab;
-	u8 tRTPx2;
-	u8 tCKE;
-	u8 tCKESR;
-	u8 tZQCS;
-	u32 tZQCL;
-	u32 tZQINIT;
-	u8 tDQSCKMAXx2;
-	u8 tRASmax;
-	u8 tFAW;
-
-};
-
-/*
- * Min tCK values for some of the parameters:
- * If the calculated clock cycles for the respective parameter is
- * less than the corresponding min tCK value, we need to set the min
- * tCK value. This may happen at lower frequencies.
- */
-struct lpddr2_min_tck {
-	u32 tRL;
-	u32 tRP_AB;
-	u32 tRCD;
-	u32 tWR;
-	u32 tRAS_MIN;
-	u32 tRRD;
-	u32 tWTR;
-	u32 tXP;
-	u32 tRTP;
-	u8  tCKE;
-	u32 tCKESR;
-	u32 tFAW;
-};
-
-struct lpddr2_device_details {
-	u8	type;
-	u8	density;
-	u8	io_width;
-	u8	manufacturer;
-};
-
-struct lpddr2_device_timings {
-	const struct lpddr2_ac_timings **ac_timings;
-	const struct lpddr2_min_tck *min_tck;
-};
-
-/* Details of the devices connected to each chip-select of an EMIF instance */
-struct emif_device_details {
-	const struct lpddr2_device_details *cs0_device_details;
-	const struct lpddr2_device_details *cs1_device_details;
-	const struct lpddr2_device_timings *cs0_device_timings;
-	const struct lpddr2_device_timings *cs1_device_timings;
-};
-
-/*
- * Structure containing shadow of important registers in EMIF
- * The calculation function fills in this structure to be later used for
- * initialization and DVFS
- */
-struct emif_regs {
-	u32 freq;
-	u32 sdram_config_init;
-	u32 sdram_config;
-	u32 ref_ctrl;
-	u32 sdram_tim1;
-	u32 sdram_tim2;
-	u32 sdram_tim3;
-	u32 read_idle_ctrl;
-	u32 zq_config;
-	u32 temp_alert_config;
-	u32 emif_ddr_phy_ctlr_1_init;
-	u32 emif_ddr_phy_ctlr_1;
-};
-
-/* assert macros */
-#if defined(DEBUG)
-#define emif_assert(c)	({ if (!(c)) for (;;); })
-#else
-#define emif_assert(c)	({ if (0) hang(); })
-#endif
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs);
-void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs);
-#else
-struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
-			struct lpddr2_device_details *lpddr2_dev_details);
-void emif_get_device_timings(u32 emif_nr,
-		const struct lpddr2_device_timings **cs0_device_timings,
-		const struct lpddr2_device_timings **cs1_device_timings);
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
new file mode 100644
index 0000000..e5c7d2c
--- /dev/null
+++ b/arch/arm/include/asm/emif.h
@@ -0,0 +1,1035 @@ 
+/*
+ * OMAP44xx EMIF header
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _EMIF_H_
+#define _EMIF_H_
+#include <asm/types.h>
+#include <common.h>
+
+/* Base address */
+#define EMIF1_BASE				0x4c000000
+#define EMIF2_BASE				0x4d000000
+
+/* Registers shifts and masks */
+
+/* EMIF_MOD_ID_REV */
+#define EMIF_REG_SCHEME_SHIFT			30
+#define EMIF_REG_SCHEME_MASK			(0x3 << 30)
+#define EMIF_REG_MODULE_ID_SHIFT			16
+#define EMIF_REG_MODULE_ID_MASK			(0xfff << 16)
+#define EMIF_REG_RTL_VERSION_SHIFT			11
+#define EMIF_REG_RTL_VERSION_MASK			(0x1f << 11)
+#define EMIF_REG_MAJOR_REVISION_SHIFT		8
+#define EMIF_REG_MAJOR_REVISION_MASK		(0x7 << 8)
+#define EMIF_REG_MINOR_REVISION_SHIFT		0
+#define EMIF_REG_MINOR_REVISION_MASK		(0x3f << 0)
+
+/* STATUS */
+#define EMIF_REG_BE_SHIFT				31
+#define EMIF_REG_BE_MASK				(1 << 31)
+#define EMIF_REG_DUAL_CLK_MODE_SHIFT		30
+#define EMIF_REG_DUAL_CLK_MODE_MASK			(1 << 30)
+#define EMIF_REG_FAST_INIT_SHIFT			29
+#define EMIF_REG_FAST_INIT_MASK			(1 << 29)
+#define EMIF_REG_PHY_DLL_READY_SHIFT		2
+#define EMIF_REG_PHY_DLL_READY_MASK			(1 << 2)
+
+/* SDRAM_CONFIG */
+#define EMIF_REG_SDRAM_TYPE_SHIFT			29
+#define EMIF_REG_SDRAM_TYPE_MASK			(0x7 << 29)
+#define EMIF_REG_IBANK_POS_SHIFT			27
+#define EMIF_REG_IBANK_POS_MASK			(0x3 << 27)
+#define EMIF_REG_DDR_TERM_SHIFT			24
+#define EMIF_REG_DDR_TERM_MASK			(0x7 << 24)
+#define EMIF_REG_DDR2_DDQS_SHIFT			23
+#define EMIF_REG_DDR2_DDQS_MASK			(1 << 23)
+#define EMIF_REG_DYN_ODT_SHIFT			21
+#define EMIF_REG_DYN_ODT_MASK			(0x3 << 21)
+#define EMIF_REG_DDR_DISABLE_DLL_SHIFT		20
+#define EMIF_REG_DDR_DISABLE_DLL_MASK		(1 << 20)
+#define EMIF_REG_SDRAM_DRIVE_SHIFT			18
+#define EMIF_REG_SDRAM_DRIVE_MASK			(0x3 << 18)
+#define EMIF_REG_CWL_SHIFT				16
+#define EMIF_REG_CWL_MASK				(0x3 << 16)
+#define EMIF_REG_NARROW_MODE_SHIFT			14
+#define EMIF_REG_NARROW_MODE_MASK			(0x3 << 14)
+#define EMIF_REG_CL_SHIFT				10
+#define EMIF_REG_CL_MASK				(0xf << 10)
+#define EMIF_REG_ROWSIZE_SHIFT			7
+#define EMIF_REG_ROWSIZE_MASK			(0x7 << 7)
+#define EMIF_REG_IBANK_SHIFT			4
+#define EMIF_REG_IBANK_MASK				(0x7 << 4)
+#define EMIF_REG_EBANK_SHIFT			3
+#define EMIF_REG_EBANK_MASK				(1 << 3)
+#define EMIF_REG_PAGESIZE_SHIFT			0
+#define EMIF_REG_PAGESIZE_MASK			(0x7 << 0)
+
+/* SDRAM_CONFIG_2 */
+#define EMIF_REG_CS1NVMEN_SHIFT			30
+#define EMIF_REG_CS1NVMEN_MASK			(1 << 30)
+#define EMIF_REG_EBANK_POS_SHIFT			27
+#define EMIF_REG_EBANK_POS_MASK			(1 << 27)
+#define EMIF_REG_RDBNUM_SHIFT			4
+#define EMIF_REG_RDBNUM_MASK			(0x3 << 4)
+#define EMIF_REG_RDBSIZE_SHIFT			0
+#define EMIF_REG_RDBSIZE_MASK			(0x7 << 0)
+
+/* SDRAM_REF_CTRL */
+#define EMIF_REG_INITREF_DIS_SHIFT			31
+#define EMIF_REG_INITREF_DIS_MASK			(1 << 31)
+#define EMIF_REG_SRT_SHIFT				29
+#define EMIF_REG_SRT_MASK				(1 << 29)
+#define EMIF_REG_ASR_SHIFT				28
+#define EMIF_REG_ASR_MASK				(1 << 28)
+#define EMIF_REG_PASR_SHIFT				24
+#define EMIF_REG_PASR_MASK				(0x7 << 24)
+#define EMIF_REG_REFRESH_RATE_SHIFT			0
+#define EMIF_REG_REFRESH_RATE_MASK			(0xffff << 0)
+
+/* SDRAM_REF_CTRL_SHDW */
+#define EMIF_REG_REFRESH_RATE_SHDW_SHIFT		0
+#define EMIF_REG_REFRESH_RATE_SHDW_MASK		(0xffff << 0)
+
+/* SDRAM_TIM_1 */
+#define EMIF_REG_T_RP_SHIFT				25
+#define EMIF_REG_T_RP_MASK				(0xf << 25)
+#define EMIF_REG_T_RCD_SHIFT			21
+#define EMIF_REG_T_RCD_MASK				(0xf << 21)
+#define EMIF_REG_T_WR_SHIFT				17
+#define EMIF_REG_T_WR_MASK				(0xf << 17)
+#define EMIF_REG_T_RAS_SHIFT			12
+#define EMIF_REG_T_RAS_MASK				(0x1f << 12)
+#define EMIF_REG_T_RC_SHIFT				6
+#define EMIF_REG_T_RC_MASK				(0x3f << 6)
+#define EMIF_REG_T_RRD_SHIFT			3
+#define EMIF_REG_T_RRD_MASK				(0x7 << 3)
+#define EMIF_REG_T_WTR_SHIFT			0
+#define EMIF_REG_T_WTR_MASK				(0x7 << 0)
+
+/* SDRAM_TIM_1_SHDW */
+#define EMIF_REG_T_RP_SHDW_SHIFT			25
+#define EMIF_REG_T_RP_SHDW_MASK			(0xf << 25)
+#define EMIF_REG_T_RCD_SHDW_SHIFT			21
+#define EMIF_REG_T_RCD_SHDW_MASK			(0xf << 21)
+#define EMIF_REG_T_WR_SHDW_SHIFT			17
+#define EMIF_REG_T_WR_SHDW_MASK			(0xf << 17)
+#define EMIF_REG_T_RAS_SHDW_SHIFT			12
+#define EMIF_REG_T_RAS_SHDW_MASK			(0x1f << 12)
+#define EMIF_REG_T_RC_SHDW_SHIFT			6
+#define EMIF_REG_T_RC_SHDW_MASK			(0x3f << 6)
+#define EMIF_REG_T_RRD_SHDW_SHIFT			3
+#define EMIF_REG_T_RRD_SHDW_MASK			(0x7 << 3)
+#define EMIF_REG_T_WTR_SHDW_SHIFT			0
+#define EMIF_REG_T_WTR_SHDW_MASK			(0x7 << 0)
+
+/* SDRAM_TIM_2 */
+#define EMIF_REG_T_XP_SHIFT				28
+#define EMIF_REG_T_XP_MASK				(0x7 << 28)
+#define EMIF_REG_T_ODT_SHIFT			25
+#define EMIF_REG_T_ODT_MASK				(0x7 << 25)
+#define EMIF_REG_T_XSNR_SHIFT			16
+#define EMIF_REG_T_XSNR_MASK			(0x1ff << 16)
+#define EMIF_REG_T_XSRD_SHIFT			6
+#define EMIF_REG_T_XSRD_MASK			(0x3ff << 6)
+#define EMIF_REG_T_RTP_SHIFT			3
+#define EMIF_REG_T_RTP_MASK				(0x7 << 3)
+#define EMIF_REG_T_CKE_SHIFT			0
+#define EMIF_REG_T_CKE_MASK				(0x7 << 0)
+
+/* SDRAM_TIM_2_SHDW */
+#define EMIF_REG_T_XP_SHDW_SHIFT			28
+#define EMIF_REG_T_XP_SHDW_MASK			(0x7 << 28)
+#define EMIF_REG_T_ODT_SHDW_SHIFT			25
+#define EMIF_REG_T_ODT_SHDW_MASK			(0x7 << 25)
+#define EMIF_REG_T_XSNR_SHDW_SHIFT			16
+#define EMIF_REG_T_XSNR_SHDW_MASK			(0x1ff << 16)
+#define EMIF_REG_T_XSRD_SHDW_SHIFT			6
+#define EMIF_REG_T_XSRD_SHDW_MASK			(0x3ff << 6)
+#define EMIF_REG_T_RTP_SHDW_SHIFT			3
+#define EMIF_REG_T_RTP_SHDW_MASK			(0x7 << 3)
+#define EMIF_REG_T_CKE_SHDW_SHIFT			0
+#define EMIF_REG_T_CKE_SHDW_MASK			(0x7 << 0)
+
+/* SDRAM_TIM_3 */
+#define EMIF_REG_T_CKESR_SHIFT			21
+#define EMIF_REG_T_CKESR_MASK			(0x7 << 21)
+#define EMIF_REG_ZQ_ZQCS_SHIFT			15
+#define EMIF_REG_ZQ_ZQCS_MASK			(0x3f << 15)
+#define EMIF_REG_T_TDQSCKMAX_SHIFT			13
+#define EMIF_REG_T_TDQSCKMAX_MASK			(0x3 << 13)
+#define EMIF_REG_T_RFC_SHIFT			4
+#define EMIF_REG_T_RFC_MASK				(0x1ff << 4)
+#define EMIF_REG_T_RAS_MAX_SHIFT			0
+#define EMIF_REG_T_RAS_MAX_MASK			(0xf << 0)
+
+/* SDRAM_TIM_3_SHDW */
+#define EMIF_REG_T_CKESR_SHDW_SHIFT			21
+#define EMIF_REG_T_CKESR_SHDW_MASK			(0x7 << 21)
+#define EMIF_REG_ZQ_ZQCS_SHDW_SHIFT			15
+#define EMIF_REG_ZQ_ZQCS_SHDW_MASK			(0x3f << 15)
+#define EMIF_REG_T_TDQSCKMAX_SHDW_SHIFT		13
+#define EMIF_REG_T_TDQSCKMAX_SHDW_MASK		(0x3 << 13)
+#define EMIF_REG_T_RFC_SHDW_SHIFT			4
+#define EMIF_REG_T_RFC_SHDW_MASK			(0x1ff << 4)
+#define EMIF_REG_T_RAS_MAX_SHDW_SHIFT		0
+#define EMIF_REG_T_RAS_MAX_SHDW_MASK		(0xf << 0)
+
+/* LPDDR2_NVM_TIM */
+#define EMIF_REG_NVM_T_XP_SHIFT			28
+#define EMIF_REG_NVM_T_XP_MASK			(0x7 << 28)
+#define EMIF_REG_NVM_T_WTR_SHIFT			24
+#define EMIF_REG_NVM_T_WTR_MASK			(0x7 << 24)
+#define EMIF_REG_NVM_T_RP_SHIFT			20
+#define EMIF_REG_NVM_T_RP_MASK			(0xf << 20)
+#define EMIF_REG_NVM_T_WRA_SHIFT			16
+#define EMIF_REG_NVM_T_WRA_MASK			(0xf << 16)
+#define EMIF_REG_NVM_T_RRD_SHIFT			8
+#define EMIF_REG_NVM_T_RRD_MASK			(0xff << 8)
+#define EMIF_REG_NVM_T_RCDMIN_SHIFT			0
+#define EMIF_REG_NVM_T_RCDMIN_MASK			(0xff << 0)
+
+/* LPDDR2_NVM_TIM_SHDW */
+#define EMIF_REG_NVM_T_XP_SHDW_SHIFT		28
+#define EMIF_REG_NVM_T_XP_SHDW_MASK			(0x7 << 28)
+#define EMIF_REG_NVM_T_WTR_SHDW_SHIFT		24
+#define EMIF_REG_NVM_T_WTR_SHDW_MASK		(0x7 << 24)
+#define EMIF_REG_NVM_T_RP_SHDW_SHIFT		20
+#define EMIF_REG_NVM_T_RP_SHDW_MASK			(0xf << 20)
+#define EMIF_REG_NVM_T_WRA_SHDW_SHIFT		16
+#define EMIF_REG_NVM_T_WRA_SHDW_MASK		(0xf << 16)
+#define EMIF_REG_NVM_T_RRD_SHDW_SHIFT		8
+#define EMIF_REG_NVM_T_RRD_SHDW_MASK		(0xff << 8)
+#define EMIF_REG_NVM_T_RCDMIN_SHDW_SHIFT		0
+#define EMIF_REG_NVM_T_RCDMIN_SHDW_MASK		(0xff << 0)
+
+/* PWR_MGMT_CTRL */
+#define EMIF_REG_IDLEMODE_SHIFT			30
+#define EMIF_REG_IDLEMODE_MASK			(0x3 << 30)
+#define EMIF_REG_PD_TIM_SHIFT			12
+#define EMIF_REG_PD_TIM_MASK			(0xf << 12)
+#define EMIF_REG_DPD_EN_SHIFT			11
+#define EMIF_REG_DPD_EN_MASK			(1 << 11)
+#define EMIF_REG_LP_MODE_SHIFT			8
+#define EMIF_REG_LP_MODE_MASK			(0x7 << 8)
+#define EMIF_REG_SR_TIM_SHIFT			4
+#define EMIF_REG_SR_TIM_MASK			(0xf << 4)
+#define EMIF_REG_CS_TIM_SHIFT			0
+#define EMIF_REG_CS_TIM_MASK			(0xf << 0)
+
+/* PWR_MGMT_CTRL_SHDW */
+#define EMIF_REG_PD_TIM_SHDW_SHIFT			8
+#define EMIF_REG_PD_TIM_SHDW_MASK			(0xf << 8)
+#define EMIF_REG_SR_TIM_SHDW_SHIFT			4
+#define EMIF_REG_SR_TIM_SHDW_MASK			(0xf << 4)
+#define EMIF_REG_CS_TIM_SHDW_SHIFT			0
+#define EMIF_REG_CS_TIM_SHDW_MASK			(0xf << 0)
+
+/* LPDDR2_MODE_REG_DATA */
+#define EMIF_REG_VALUE_0_SHIFT			0
+#define EMIF_REG_VALUE_0_MASK			(0x7f << 0)
+
+/* LPDDR2_MODE_REG_CFG */
+#define EMIF_REG_CS_SHIFT				31
+#define EMIF_REG_CS_MASK				(1 << 31)
+#define EMIF_REG_REFRESH_EN_SHIFT			30
+#define EMIF_REG_REFRESH_EN_MASK			(1 << 30)
+#define EMIF_REG_ADDRESS_SHIFT			0
+#define EMIF_REG_ADDRESS_MASK			(0xff << 0)
+
+/* OCP_CONFIG */
+#define EMIF_REG_SYS_THRESH_MAX_SHIFT		24
+#define EMIF_REG_SYS_THRESH_MAX_MASK		(0xf << 24)
+#define EMIF_REG_MPU_THRESH_MAX_SHIFT		20
+#define EMIF_REG_MPU_THRESH_MAX_MASK		(0xf << 20)
+#define EMIF_REG_LL_THRESH_MAX_SHIFT		16
+#define EMIF_REG_LL_THRESH_MAX_MASK			(0xf << 16)
+#define EMIF_REG_PR_OLD_COUNT_SHIFT			0
+#define EMIF_REG_PR_OLD_COUNT_MASK			(0xff << 0)
+
+/* OCP_CFG_VAL_1 */
+#define EMIF_REG_SYS_BUS_WIDTH_SHIFT		30
+#define EMIF_REG_SYS_BUS_WIDTH_MASK			(0x3 << 30)
+#define EMIF_REG_LL_BUS_WIDTH_SHIFT			28
+#define EMIF_REG_LL_BUS_WIDTH_MASK			(0x3 << 28)
+#define EMIF_REG_WR_FIFO_DEPTH_SHIFT		8
+#define EMIF_REG_WR_FIFO_DEPTH_MASK			(0xff << 8)
+#define EMIF_REG_CMD_FIFO_DEPTH_SHIFT		0
+#define EMIF_REG_CMD_FIFO_DEPTH_MASK		(0xff << 0)
+
+/* OCP_CFG_VAL_2 */
+#define EMIF_REG_RREG_FIFO_DEPTH_SHIFT		16
+#define EMIF_REG_RREG_FIFO_DEPTH_MASK		(0xff << 16)
+#define EMIF_REG_RSD_FIFO_DEPTH_SHIFT		8
+#define EMIF_REG_RSD_FIFO_DEPTH_MASK		(0xff << 8)
+#define EMIF_REG_RCMD_FIFO_DEPTH_SHIFT		0
+#define EMIF_REG_RCMD_FIFO_DEPTH_MASK		(0xff << 0)
+
+/* IODFT_TLGC */
+#define EMIF_REG_TLEC_SHIFT				16
+#define EMIF_REG_TLEC_MASK				(0xffff << 16)
+#define EMIF_REG_MT_SHIFT				14
+#define EMIF_REG_MT_MASK				(1 << 14)
+#define EMIF_REG_ACT_CAP_EN_SHIFT			13
+#define EMIF_REG_ACT_CAP_EN_MASK			(1 << 13)
+#define EMIF_REG_OPG_LD_SHIFT			12
+#define EMIF_REG_OPG_LD_MASK			(1 << 12)
+#define EMIF_REG_RESET_PHY_SHIFT			10
+#define EMIF_REG_RESET_PHY_MASK			(1 << 10)
+#define EMIF_REG_MMS_SHIFT				8
+#define EMIF_REG_MMS_MASK				(1 << 8)
+#define EMIF_REG_MC_SHIFT				4
+#define EMIF_REG_MC_MASK				(0x3 << 4)
+#define EMIF_REG_PC_SHIFT				1
+#define EMIF_REG_PC_MASK				(0x7 << 1)
+#define EMIF_REG_TM_SHIFT				0
+#define EMIF_REG_TM_MASK				(1 << 0)
+
+/* IODFT_CTRL_MISR_RSLT */
+#define EMIF_REG_DQM_TLMR_SHIFT			16
+#define EMIF_REG_DQM_TLMR_MASK			(0x3ff << 16)
+#define EMIF_REG_CTL_TLMR_SHIFT			0
+#define EMIF_REG_CTL_TLMR_MASK			(0x7ff << 0)
+
+/* IODFT_ADDR_MISR_RSLT */
+#define EMIF_REG_ADDR_TLMR_SHIFT			0
+#define EMIF_REG_ADDR_TLMR_MASK			(0x1fffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_1 */
+#define EMIF_REG_DATA_TLMR_31_0_SHIFT		0
+#define EMIF_REG_DATA_TLMR_31_0_MASK		(0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_2 */
+#define EMIF_REG_DATA_TLMR_63_32_SHIFT		0
+#define EMIF_REG_DATA_TLMR_63_32_MASK		(0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_3 */
+#define EMIF_REG_DATA_TLMR_66_64_SHIFT		0
+#define EMIF_REG_DATA_TLMR_66_64_MASK		(0x7 << 0)
+
+/* PERF_CNT_1 */
+#define EMIF_REG_COUNTER1_SHIFT			0
+#define EMIF_REG_COUNTER1_MASK			(0xffffffff << 0)
+
+/* PERF_CNT_2 */
+#define EMIF_REG_COUNTER2_SHIFT			0
+#define EMIF_REG_COUNTER2_MASK			(0xffffffff << 0)
+
+/* PERF_CNT_CFG */
+#define EMIF_REG_CNTR2_MCONNID_EN_SHIFT		31
+#define EMIF_REG_CNTR2_MCONNID_EN_MASK		(1 << 31)
+#define EMIF_REG_CNTR2_REGION_EN_SHIFT		30
+#define EMIF_REG_CNTR2_REGION_EN_MASK		(1 << 30)
+#define EMIF_REG_CNTR2_CFG_SHIFT			16
+#define EMIF_REG_CNTR2_CFG_MASK			(0xf << 16)
+#define EMIF_REG_CNTR1_MCONNID_EN_SHIFT		15
+#define EMIF_REG_CNTR1_MCONNID_EN_MASK		(1 << 15)
+#define EMIF_REG_CNTR1_REGION_EN_SHIFT		14
+#define EMIF_REG_CNTR1_REGION_EN_MASK		(1 << 14)
+#define EMIF_REG_CNTR1_CFG_SHIFT			0
+#define EMIF_REG_CNTR1_CFG_MASK			(0xf << 0)
+
+/* PERF_CNT_SEL */
+#define EMIF_REG_MCONNID2_SHIFT			24
+#define EMIF_REG_MCONNID2_MASK			(0xff << 24)
+#define EMIF_REG_REGION_SEL2_SHIFT			16
+#define EMIF_REG_REGION_SEL2_MASK			(0x3 << 16)
+#define EMIF_REG_MCONNID1_SHIFT			8
+#define EMIF_REG_MCONNID1_MASK			(0xff << 8)
+#define EMIF_REG_REGION_SEL1_SHIFT			0
+#define EMIF_REG_REGION_SEL1_MASK			(0x3 << 0)
+
+/* PERF_CNT_TIM */
+#define EMIF_REG_TOTAL_TIME_SHIFT			0
+#define EMIF_REG_TOTAL_TIME_MASK			(0xffffffff << 0)
+
+/* READ_IDLE_CTRL */
+#define EMIF_REG_READ_IDLE_LEN_SHIFT		16
+#define EMIF_REG_READ_IDLE_LEN_MASK			(0xf << 16)
+#define EMIF_REG_READ_IDLE_INTERVAL_SHIFT		0
+#define EMIF_REG_READ_IDLE_INTERVAL_MASK		(0x1ff << 0)
+
+/* READ_IDLE_CTRL_SHDW */
+#define EMIF_REG_READ_IDLE_LEN_SHDW_SHIFT		16
+#define EMIF_REG_READ_IDLE_LEN_SHDW_MASK		(0xf << 16)
+#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_SHIFT	0
+#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_MASK	(0x1ff << 0)
+
+/* IRQ_EOI */
+#define EMIF_REG_EOI_SHIFT				0
+#define EMIF_REG_EOI_MASK				(1 << 0)
+
+/* IRQSTATUS_RAW_SYS */
+#define EMIF_REG_DNV_SYS_SHIFT			2
+#define EMIF_REG_DNV_SYS_MASK			(1 << 2)
+#define EMIF_REG_TA_SYS_SHIFT			1
+#define EMIF_REG_TA_SYS_MASK			(1 << 1)
+#define EMIF_REG_ERR_SYS_SHIFT			0
+#define EMIF_REG_ERR_SYS_MASK			(1 << 0)
+
+/* IRQSTATUS_RAW_LL */
+#define EMIF_REG_DNV_LL_SHIFT			2
+#define EMIF_REG_DNV_LL_MASK			(1 << 2)
+#define EMIF_REG_TA_LL_SHIFT			1
+#define EMIF_REG_TA_LL_MASK				(1 << 1)
+#define EMIF_REG_ERR_LL_SHIFT			0
+#define EMIF_REG_ERR_LL_MASK			(1 << 0)
+
+/* IRQSTATUS_SYS */
+
+/* IRQSTATUS_LL */
+
+/* IRQENABLE_SET_SYS */
+#define EMIF_REG_EN_DNV_SYS_SHIFT			2
+#define EMIF_REG_EN_DNV_SYS_MASK			(1 << 2)
+#define EMIF_REG_EN_TA_SYS_SHIFT			1
+#define EMIF_REG_EN_TA_SYS_MASK			(1 << 1)
+#define EMIF_REG_EN_ERR_SYS_SHIFT			0
+#define EMIF_REG_EN_ERR_SYS_MASK			(1 << 0)
+
+/* IRQENABLE_SET_LL */
+#define EMIF_REG_EN_DNV_LL_SHIFT			2
+#define EMIF_REG_EN_DNV_LL_MASK			(1 << 2)
+#define EMIF_REG_EN_TA_LL_SHIFT			1
+#define EMIF_REG_EN_TA_LL_MASK			(1 << 1)
+#define EMIF_REG_EN_ERR_LL_SHIFT			0
+#define EMIF_REG_EN_ERR_LL_MASK			(1 << 0)
+
+/* IRQENABLE_CLR_SYS */
+
+/* IRQENABLE_CLR_LL */
+
+/* ZQ_CONFIG */
+#define EMIF_REG_ZQ_CS1EN_SHIFT			31
+#define EMIF_REG_ZQ_CS1EN_MASK			(1 << 31)
+#define EMIF_REG_ZQ_CS0EN_SHIFT			30
+#define EMIF_REG_ZQ_CS0EN_MASK			(1 << 30)
+#define EMIF_REG_ZQ_DUALCALEN_SHIFT			29
+#define EMIF_REG_ZQ_DUALCALEN_MASK			(1 << 29)
+#define EMIF_REG_ZQ_SFEXITEN_SHIFT			28
+#define EMIF_REG_ZQ_SFEXITEN_MASK			(1 << 28)
+#define EMIF_REG_ZQ_ZQINIT_MULT_SHIFT		18
+#define EMIF_REG_ZQ_ZQINIT_MULT_MASK		(0x3 << 18)
+#define EMIF_REG_ZQ_ZQCL_MULT_SHIFT			16
+#define EMIF_REG_ZQ_ZQCL_MULT_MASK			(0x3 << 16)
+#define EMIF_REG_ZQ_REFINTERVAL_SHIFT		0
+#define EMIF_REG_ZQ_REFINTERVAL_MASK		(0xffff << 0)
+
+/* TEMP_ALERT_CONFIG */
+#define EMIF_REG_TA_CS1EN_SHIFT			31
+#define EMIF_REG_TA_CS1EN_MASK			(1 << 31)
+#define EMIF_REG_TA_CS0EN_SHIFT			30
+#define EMIF_REG_TA_CS0EN_MASK			(1 << 30)
+#define EMIF_REG_TA_SFEXITEN_SHIFT			28
+#define EMIF_REG_TA_SFEXITEN_MASK			(1 << 28)
+#define EMIF_REG_TA_DEVWDT_SHIFT			26
+#define EMIF_REG_TA_DEVWDT_MASK			(0x3 << 26)
+#define EMIF_REG_TA_DEVCNT_SHIFT			24
+#define EMIF_REG_TA_DEVCNT_MASK			(0x3 << 24)
+#define EMIF_REG_TA_REFINTERVAL_SHIFT		0
+#define EMIF_REG_TA_REFINTERVAL_MASK		(0x3fffff << 0)
+
+/* OCP_ERR_LOG */
+#define EMIF_REG_MADDRSPACE_SHIFT			14
+#define EMIF_REG_MADDRSPACE_MASK			(0x3 << 14)
+#define EMIF_REG_MBURSTSEQ_SHIFT			11
+#define EMIF_REG_MBURSTSEQ_MASK			(0x7 << 11)
+#define EMIF_REG_MCMD_SHIFT				8
+#define EMIF_REG_MCMD_MASK				(0x7 << 8)
+#define EMIF_REG_MCONNID_SHIFT			0
+#define EMIF_REG_MCONNID_MASK			(0xff << 0)
+
+/* DDR_PHY_CTRL_1 */
+#define EMIF_REG_DDR_PHY_CTRL_1_SHIFT		4
+#define EMIF_REG_DDR_PHY_CTRL_1_MASK		(0xfffffff << 4)
+#define EMIF_REG_READ_LATENCY_SHIFT			0
+#define EMIF_REG_READ_LATENCY_MASK			(0xf << 0)
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT		4
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_MASK		(0xFF << 4)
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT	12
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK	(0xFFFFF << 12)
+
+/* DDR_PHY_CTRL_1_SHDW */
+#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_SHIFT		4
+#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_MASK		(0xfffffff << 4)
+#define EMIF_REG_READ_LATENCY_SHDW_SHIFT		0
+#define EMIF_REG_READ_LATENCY_SHDW_MASK		(0xf << 0)
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT	4
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK	(0xFF << 4)
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK	(0xFFFFF << 12)
+
+/* DDR_PHY_CTRL_2 */
+#define EMIF_REG_DDR_PHY_CTRL_2_SHIFT		0
+#define EMIF_REG_DDR_PHY_CTRL_2_MASK		(0xffffffff << 0)
+
+/* DMM */
+#define DMM_BASE			0x4E000040
+
+/* Memory Adapter */
+#define MA_BASE				0x482AF040
+
+/* DMM_LISA_MAP */
+#define EMIF_SYS_ADDR_SHIFT		24
+#define EMIF_SYS_ADDR_MASK		(0xff << 24)
+#define EMIF_SYS_SIZE_SHIFT		20
+#define EMIF_SYS_SIZE_MASK		(0x7 << 20)
+#define EMIF_SDRC_INTL_SHIFT	18
+#define EMIF_SDRC_INTL_MASK		(0x3 << 18)
+#define EMIF_SDRC_ADDRSPC_SHIFT	16
+#define EMIF_SDRC_ADDRSPC_MASK	(0x3 << 16)
+#define EMIF_SDRC_MAP_SHIFT		8
+#define EMIF_SDRC_MAP_MASK		(0x3 << 8)
+#define EMIF_SDRC_ADDR_SHIFT	0
+#define EMIF_SDRC_ADDR_MASK		(0xff << 0)
+
+/* DMM_LISA_MAP fields */
+#define DMM_SDRC_MAP_UNMAPPED		0
+#define DMM_SDRC_MAP_EMIF1_ONLY		1
+#define DMM_SDRC_MAP_EMIF2_ONLY		2
+#define DMM_SDRC_MAP_EMIF1_AND_EMIF2	3
+
+#define DMM_SDRC_INTL_NONE		0
+#define DMM_SDRC_INTL_128B		1
+#define DMM_SDRC_INTL_256B		2
+#define DMM_SDRC_INTL_512		3
+
+#define DMM_SDRC_ADDR_SPC_SDRAM		0
+#define DMM_SDRC_ADDR_SPC_NVM		1
+#define DMM_SDRC_ADDR_SPC_INVALID	2
+
+#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL		(\
+	(DMM_SDRC_MAP_EMIF1_AND_EMIF2 << EMIF_SDRC_MAP_SHIFT) |\
+	(DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT) |\
+	(DMM_SDRC_INTL_128B << EMIF_SDRC_INTL_SHIFT) |\
+	(CONFIG_SYS_SDRAM_BASE << EMIF_SYS_ADDR_SHIFT))
+
+#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL	(\
+	(DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+	(DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\
+	(DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT))
+
+#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL	(\
+	(DMM_SDRC_MAP_EMIF2_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+	(DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\
+	(DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT))
+
+/* Trap for invalid TILER PAT entries */
+#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP		(\
+	(0  << EMIF_SDRC_ADDR_SHIFT) |\
+	(DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+	(DMM_SDRC_ADDR_SPC_INVALID << EMIF_SDRC_ADDRSPC_SHIFT)|\
+	(DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT)|\
+	(0xFF << EMIF_SYS_ADDR_SHIFT))
+
+
+/* Reg mapping structure */
+struct emif_reg_struct {
+	u32 emif_mod_id_rev;
+	u32 emif_status;
+	u32 emif_sdram_config;
+	u32 emif_lpddr2_nvm_config;
+	u32 emif_sdram_ref_ctrl;
+	u32 emif_sdram_ref_ctrl_shdw;
+	u32 emif_sdram_tim_1;
+	u32 emif_sdram_tim_1_shdw;
+	u32 emif_sdram_tim_2;
+	u32 emif_sdram_tim_2_shdw;
+	u32 emif_sdram_tim_3;
+	u32 emif_sdram_tim_3_shdw;
+	u32 emif_lpddr2_nvm_tim;
+	u32 emif_lpddr2_nvm_tim_shdw;
+	u32 emif_pwr_mgmt_ctrl;
+	u32 emif_pwr_mgmt_ctrl_shdw;
+	u32 emif_lpddr2_mode_reg_data;
+	u32 padding1[1];
+	u32 emif_lpddr2_mode_reg_data_es2;
+	u32 padding11[1];
+	u32 emif_lpddr2_mode_reg_cfg;
+	u32 emif_l3_config;
+	u32 emif_l3_cfg_val_1;
+	u32 emif_l3_cfg_val_2;
+	u32 emif_iodft_tlgc;
+	u32 padding2[7];
+	u32 emif_perf_cnt_1;
+	u32 emif_perf_cnt_2;
+	u32 emif_perf_cnt_cfg;
+	u32 emif_perf_cnt_sel;
+	u32 emif_perf_cnt_tim;
+	u32 padding3;
+	u32 emif_read_idlectrl;
+	u32 emif_read_idlectrl_shdw;
+	u32 padding4;
+	u32 emif_irqstatus_raw_sys;
+	u32 emif_irqstatus_raw_ll;
+	u32 emif_irqstatus_sys;
+	u32 emif_irqstatus_ll;
+	u32 emif_irqenable_set_sys;
+	u32 emif_irqenable_set_ll;
+	u32 emif_irqenable_clr_sys;
+	u32 emif_irqenable_clr_ll;
+	u32 padding5;
+	u32 emif_zq_config;
+	u32 emif_temp_alert_config;
+	u32 emif_l3_err_log;
+	u32 padding6[4];
+	u32 emif_ddr_phy_ctrl_1;
+	u32 emif_ddr_phy_ctrl_1_shdw;
+	u32 emif_ddr_phy_ctrl_2;
+};
+
+struct dmm_lisa_map_regs {
+	u32 dmm_lisa_map_0;
+	u32 dmm_lisa_map_1;
+	u32 dmm_lisa_map_2;
+	u32 dmm_lisa_map_3;
+};
+
+#define CS0	0
+#define CS1	1
+/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
+#define MAX_LPDDR2_FREQ	400000000	/* 400 MHz */
+
+/*
+ * The period of DDR clk is represented as numerator and denominator for
+ * better accuracy in integer based calculations. However, if the numerator
+ * and denominator are very huge there may be chances of overflow in
+ * calculations. So, as a trade-off keep denominator(and consequently
+ * numerator) within a limit sacrificing some accuracy - but not much
+ * If denominator and numerator are already small (such as at 400 MHz)
+ * no adjustment is needed
+ */
+#define EMIF_PERIOD_DEN_LIMIT	1000
+/*
+ * Maximum number of different frequencies supported by EMIF driver
+ * Determines the number of entries in the pointer array for register
+ * cache
+ */
+#define EMIF_MAX_NUM_FREQUENCIES	6
+/*
+ * Indices into the Addressing Table array.
+ * One entry each for all the different types of devices with different
+ * addressing schemes
+ */
+#define ADDR_TABLE_INDEX64M	0
+#define ADDR_TABLE_INDEX128M	1
+#define ADDR_TABLE_INDEX256M	2
+#define ADDR_TABLE_INDEX512M	3
+#define ADDR_TABLE_INDEX1GS4	4
+#define ADDR_TABLE_INDEX2GS4	5
+#define ADDR_TABLE_INDEX4G	6
+#define ADDR_TABLE_INDEX8G	7
+#define ADDR_TABLE_INDEX1GS2	8
+#define ADDR_TABLE_INDEX2GS2	9
+#define ADDR_TABLE_INDEXMAX	10
+
+/* Number of Row bits */
+#define ROW_9  0
+#define ROW_10 1
+#define ROW_11 2
+#define ROW_12 3
+#define ROW_13 4
+#define ROW_14 5
+#define ROW_15 6
+#define ROW_16 7
+
+/* Number of Column bits */
+#define COL_8   0
+#define COL_9   1
+#define COL_10  2
+#define COL_11  3
+#define COL_7   4 /*Not supported by OMAP included for completeness */
+
+/* Number of Banks*/
+#define BANKS1 0
+#define BANKS2 1
+#define BANKS4 2
+#define BANKS8 3
+
+/* Refresh rate in micro seconds x 10 */
+#define T_REFI_15_6	156
+#define T_REFI_7_8	78
+#define T_REFI_3_9	39
+
+#define EBANK_CS1_DIS	0
+#define EBANK_CS1_EN	1
+
+/* Read Latency used by the device at reset */
+#define RL_BOOT		3
+/* Read Latency for the highest frequency you want to use */
+#ifdef CONFIG_OMAP54XX
+#define RL_FINAL	8
+#else
+#define RL_FINAL	6
+#endif
+
+
+/* Interleaving policies at EMIF level- between banks and Chip Selects */
+#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING	0
+#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING	3
+
+/*
+ * Interleaving policy to be used
+ * Currently set to MAX interleaving for better performance
+ */
+#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING
+
+/* State of the core voltage:
+ * This is important for some parameters such as read idle control and
+ * ZQ calibration timings. Timings are much stricter when voltage ramp
+ * is happening compared to when the voltage is stable.
+ * We need to calculate two sets of values for these parameters and use
+ * them accordingly
+ */
+#define LPDDR2_VOLTAGE_STABLE	0
+#define LPDDR2_VOLTAGE_RAMPING	1
+
+/* Length of the forced read idle period in terms of cycles */
+#define EMIF_REG_READ_IDLE_LEN_VAL	5
+
+/* Interval between forced 'read idles' */
+/* To be used when voltage is changed for DPS/DVFS - 1us */
+#define READ_IDLE_INTERVAL_DVFS		(1*1000)
+/*
+ * To be used when voltage is not scaled except by Smart Reflex
+ * 50us - or maximum value will do
+ */
+#define READ_IDLE_INTERVAL_NORMAL	(50*1000)
+
+
+/*
+ * Unless voltage is changing due to DVFS one ZQCS command every 50ms should
+ * be enough. This shoule be enough also in the case when voltage is changing
+ * due to smart-reflex.
+ */
+#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US	(50*1000)
+/*
+ * If voltage is changing due to DVFS ZQCS should be performed more
+ * often(every 50us)
+ */
+#define EMIF_ZQCS_INTERVAL_DVFS_IN_US	50
+
+/* The interval between ZQCL commands as a multiple of ZQCS interval */
+#define REG_ZQ_ZQCL_MULT		4
+/* The interval between ZQINIT commands as a multiple of ZQCL interval */
+#define REG_ZQ_ZQINIT_MULT		3
+/* Enable ZQ Calibration on exiting Self-refresh */
+#define REG_ZQ_SFEXITEN_ENABLE		1
+/*
+ * ZQ Calibration simultaneously on both chip-selects:
+ * Needs one calibration resistor per CS
+ * None of the boards that we know of have this capability
+ * So disabled by default
+ */
+#define REG_ZQ_DUALCALEN_DISABLE	0
+/*
+ * Enable ZQ Calibration by default on CS0. If we are asked to program
+ * the EMIF there will be something connected to CS0 for sure
+ */
+#define REG_ZQ_CS0EN_ENABLE		1
+
+/* EMIF_PWR_MGMT_CTRL register */
+/* Low power modes */
+#define LP_MODE_DISABLE		0
+#define LP_MODE_CLOCK_STOP	1
+#define LP_MODE_SELF_REFRESH	2
+#define LP_MODE_PWR_DN		3
+
+/* REG_DPD_EN */
+#define DPD_DISABLE	0
+#define DPD_ENABLE	1
+
+/* Maximum delay before Low Power Modes */
+#define REG_CS_TIM		0xF
+#define REG_SR_TIM		0xF
+#define REG_PD_TIM		0xF
+
+/* EMIF_PWR_MGMT_CTRL register */
+#define EMIF_PWR_MGMT_CTRL (\
+	((REG_CS_TIM << EMIF_REG_CS_TIM_SHIFT) & EMIF_REG_CS_TIM_MASK)|\
+	((REG_SR_TIM << EMIF_REG_SR_TIM_SHIFT) & EMIF_REG_SR_TIM_MASK)|\
+	((REG_PD_TIM << EMIF_REG_PD_TIM_SHIFT) & EMIF_REG_PD_TIM_MASK)|\
+	((REG_PD_TIM << EMIF_REG_PD_TIM_SHIFT) & EMIF_REG_PD_TIM_MASK)|\
+	((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT)\
+			& EMIF_REG_LP_MODE_MASK) |\
+	((DPD_DISABLE << EMIF_REG_DPD_EN_SHIFT)\
+			& EMIF_REG_DPD_EN_MASK))\
+
+#define EMIF_PWR_MGMT_CTRL_SHDW (\
+	((REG_CS_TIM << EMIF_REG_CS_TIM_SHDW_SHIFT)\
+			& EMIF_REG_CS_TIM_SHDW_MASK) |\
+	((REG_SR_TIM << EMIF_REG_SR_TIM_SHDW_SHIFT)\
+			& EMIF_REG_SR_TIM_SHDW_MASK) |\
+	((REG_PD_TIM << EMIF_REG_PD_TIM_SHDW_SHIFT)\
+			& EMIF_REG_PD_TIM_SHDW_MASK) |\
+	((REG_PD_TIM << EMIF_REG_PD_TIM_SHDW_SHIFT)\
+			& EMIF_REG_PD_TIM_SHDW_MASK))
+
+/* EMIF_L3_CONFIG register value */
+#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0	0x0A0000FF
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0	0x0A300000
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0	0x0A300000
+
+/*
+ * Value of bits 12:31 of DDR_PHY_CTRL_1 register:
+ * All these fields have magic values dependent on frequency and
+ * determined by PHY and DLL integration with EMIF. Setting the magic
+ * values suggested by hw team.
+ */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL			0x049FF
+#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ			0x41
+#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ			0x80
+#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS	0xFF
+
+/*
+* MR1 value:
+* Burst length	: 8
+* Burst type	: sequential
+* Wrap		: enabled
+* nWR		: 3(default). EMIF does not do pre-charge.
+*		: So nWR is don't care
+*/
+#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3	0x23
+
+/* MR2 */
+#define MR2_RL3_WL1			1
+#define MR2_RL4_WL2			2
+#define MR2_RL5_WL2			3
+#define MR2_RL6_WL3			4
+
+/* MR10: ZQ calibration codes */
+#define MR10_ZQ_ZQCS		0x56
+#define MR10_ZQ_ZQCL		0xAB
+#define MR10_ZQ_ZQINIT		0xFF
+#define MR10_ZQ_ZQRESET		0xC3
+
+/* TEMP_ALERT_CONFIG */
+#define TEMP_ALERT_POLL_INTERVAL_MS	360 /* for temp gradient - 5 C/s */
+#define TEMP_ALERT_CONFIG_DEVCT_1	0
+#define TEMP_ALERT_CONFIG_DEVWDT_32	2
+
+/* MR16 value: refresh full array(no partial array self refresh) */
+#define MR16_REF_FULL_ARRAY	0
+
+/*
+ * Maximum number of entries we keep in our array of timing tables
+ * We need not keep all the speed bins supported by the device
+ * We need to keep timing tables for only the speed bins that we
+ * are interested in
+ */
+#define MAX_NUM_SPEEDBINS	4
+
+/* LPDDR2 Densities */
+#define LPDDR2_DENSITY_64Mb	0
+#define LPDDR2_DENSITY_128Mb	1
+#define LPDDR2_DENSITY_256Mb	2
+#define LPDDR2_DENSITY_512Mb	3
+#define LPDDR2_DENSITY_1Gb	4
+#define LPDDR2_DENSITY_2Gb	5
+#define LPDDR2_DENSITY_4Gb	6
+#define LPDDR2_DENSITY_8Gb	7
+#define LPDDR2_DENSITY_16Gb	8
+#define LPDDR2_DENSITY_32Gb	9
+
+/* LPDDR2 type */
+#define	LPDDR2_TYPE_S4	0
+#define	LPDDR2_TYPE_S2	1
+#define	LPDDR2_TYPE_NVM	2
+
+/* LPDDR2 IO width */
+#define	LPDDR2_IO_WIDTH_32	0
+#define	LPDDR2_IO_WIDTH_16	1
+#define	LPDDR2_IO_WIDTH_8	2
+
+/* Mode register numbers */
+#define LPDDR2_MR0	0
+#define LPDDR2_MR1	1
+#define LPDDR2_MR2	2
+#define LPDDR2_MR3	3
+#define LPDDR2_MR4	4
+#define LPDDR2_MR5	5
+#define LPDDR2_MR6	6
+#define LPDDR2_MR7	7
+#define LPDDR2_MR8	8
+#define LPDDR2_MR9	9
+#define LPDDR2_MR10	10
+#define LPDDR2_MR11	11
+#define LPDDR2_MR16	16
+#define LPDDR2_MR17	17
+#define LPDDR2_MR18	18
+
+/* MR0 */
+#define LPDDR2_MR0_DAI_SHIFT	0
+#define LPDDR2_MR0_DAI_MASK	1
+#define LPDDR2_MR0_DI_SHIFT	1
+#define LPDDR2_MR0_DI_MASK	(1 << 1)
+#define LPDDR2_MR0_DNVI_SHIFT	2
+#define LPDDR2_MR0_DNVI_MASK	(1 << 2)
+
+/* MR4 */
+#define MR4_SDRAM_REF_RATE_SHIFT	0
+#define MR4_SDRAM_REF_RATE_MASK		7
+#define MR4_TUF_SHIFT			7
+#define MR4_TUF_MASK			(1 << 7)
+
+/* MR4 SDRAM Refresh Rate field values */
+#define SDRAM_TEMP_LESS_LOW_SHUTDOWN			0x0
+#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS		0x1
+#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS		0x2
+#define SDRAM_TEMP_NOMINAL				0x3
+#define SDRAM_TEMP_RESERVED_4				0x4
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH			0x5
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS	0x6
+#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN			0x7
+
+#define LPDDR2_MANUFACTURER_SAMSUNG	1
+#define LPDDR2_MANUFACTURER_QIMONDA	2
+#define LPDDR2_MANUFACTURER_ELPIDA	3
+#define LPDDR2_MANUFACTURER_ETRON	4
+#define LPDDR2_MANUFACTURER_NANYA	5
+#define LPDDR2_MANUFACTURER_HYNIX	6
+#define LPDDR2_MANUFACTURER_MOSEL	7
+#define LPDDR2_MANUFACTURER_WINBOND	8
+#define LPDDR2_MANUFACTURER_ESMT	9
+#define LPDDR2_MANUFACTURER_SPANSION 11
+#define LPDDR2_MANUFACTURER_SST		12
+#define LPDDR2_MANUFACTURER_ZMOS	13
+#define LPDDR2_MANUFACTURER_INTEL	14
+#define LPDDR2_MANUFACTURER_NUMONYX	254
+#define LPDDR2_MANUFACTURER_MICRON	255
+
+/* MR8 register fields */
+#define MR8_TYPE_SHIFT		0x0
+#define MR8_TYPE_MASK		0x3
+#define MR8_DENSITY_SHIFT	0x2
+#define MR8_DENSITY_MASK	(0xF << 0x2)
+#define MR8_IO_WIDTH_SHIFT	0x6
+#define MR8_IO_WIDTH_MASK	(0x3 << 0x6)
+
+struct lpddr2_addressing {
+	u8	num_banks;
+	u8	t_REFI_us_x10;
+	u8	row_sz[2]; /* One entry each for x32 and x16 */
+	u8	col_sz[2]; /* One entry each for x32 and x16 */
+};
+
+/* Structure for timings from the DDR datasheet */
+struct lpddr2_ac_timings {
+	u32 max_freq;
+	u8 RL;
+	u8 tRPab;
+	u8 tRCD;
+	u8 tWR;
+	u8 tRASmin;
+	u8 tRRD;
+	u8 tWTRx2;
+	u8 tXSR;
+	u8 tXPx2;
+	u8 tRFCab;
+	u8 tRTPx2;
+	u8 tCKE;
+	u8 tCKESR;
+	u8 tZQCS;
+	u32 tZQCL;
+	u32 tZQINIT;
+	u8 tDQSCKMAXx2;
+	u8 tRASmax;
+	u8 tFAW;
+
+};
+
+/*
+ * Min tCK values for some of the parameters:
+ * If the calculated clock cycles for the respective parameter is
+ * less than the corresponding min tCK value, we need to set the min
+ * tCK value. This may happen at lower frequencies.
+ */
+struct lpddr2_min_tck {
+	u32 tRL;
+	u32 tRP_AB;
+	u32 tRCD;
+	u32 tWR;
+	u32 tRAS_MIN;
+	u32 tRRD;
+	u32 tWTR;
+	u32 tXP;
+	u32 tRTP;
+	u8  tCKE;
+	u32 tCKESR;
+	u32 tFAW;
+};
+
+struct lpddr2_device_details {
+	u8	type;
+	u8	density;
+	u8	io_width;
+	u8	manufacturer;
+};
+
+struct lpddr2_device_timings {
+	const struct lpddr2_ac_timings **ac_timings;
+	const struct lpddr2_min_tck *min_tck;
+};
+
+/* Details of the devices connected to each chip-select of an EMIF instance */
+struct emif_device_details {
+	const struct lpddr2_device_details *cs0_device_details;
+	const struct lpddr2_device_details *cs1_device_details;
+	const struct lpddr2_device_timings *cs0_device_timings;
+	const struct lpddr2_device_timings *cs1_device_timings;
+};
+
+/*
+ * Structure containing shadow of important registers in EMIF
+ * The calculation function fills in this structure to be later used for
+ * initialization and DVFS
+ */
+struct emif_regs {
+	u32 freq;
+	u32 sdram_config_init;
+	u32 sdram_config;
+	u32 ref_ctrl;
+	u32 sdram_tim1;
+	u32 sdram_tim2;
+	u32 sdram_tim3;
+	u32 read_idle_ctrl;
+	u32 zq_config;
+	u32 temp_alert_config;
+	u32 emif_ddr_phy_ctlr_1_init;
+	u32 emif_ddr_phy_ctlr_1;
+};
+
+/* assert macros */
+#if defined(DEBUG)
+#define emif_assert(c)	({ if (!(c)) for (;;); })
+#else
+#define emif_assert(c)	({ if (0) hang(); })
+#endif
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs);
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs);
+#else
+struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
+			struct lpddr2_device_details *lpddr2_dev_details);
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings);
+#endif
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+extern u32 *const T_num;
+extern u32 *const T_den;
+extern u32 *const emif_sizes;
+#endif
+
+
+#endif