[3/3] mx7dsabre: Convert to distroboot support
diff mbox series

Message ID 20191208170232.24803-4-offougajoris@gmail.com
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show
Series
  • [1/3] mx7dsabre: Remove warning about DM_SPI_FLASH
Related show

Commit Message

Joris OFFOUGA Dec. 8, 2019, 5:02 p.m. UTC
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
---
 configs/mx7dsabresd_defconfig      | 13 ++---
 configs/mx7dsabresd_qspi_defconfig | 14 ++---
 include/configs/mx7dsabresd.h      | 84 ++++++------------------------
 3 files changed, 25 insertions(+), 86 deletions(-)

Comments

Stefano Babic Dec. 29, 2019, 10:25 a.m. UTC | #1
> Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Applied to u-boot-imx, -next, thanks !

Best regards,
Stefano Babic

Patch
diff mbox series

diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig
index 48aa15a199..d15de386fc 100644
--- a/configs/mx7dsabresd_defconfig
+++ b/configs/mx7dsabresd_defconfig
@@ -9,13 +9,13 @@  CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
 # CONFIG_ARMV7_VIRT is not set
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg"
+CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOUNCE_BUFFER=y
-CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_BOOTD is not set
-CONFIG_CMD_BOOTZ=y
 # CONFIG_BOOTM_NETBSD is not set
 # CONFIG_BOOTM_PLAN9 is not set
 # CONFIG_BOOTM_RTEMS is not set
@@ -30,17 +30,13 @@  CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -78,7 +74,6 @@  CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_MXC_USB_OTG_HACTIVE=y
-CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
diff --git a/configs/mx7dsabresd_qspi_defconfig b/configs/mx7dsabresd_qspi_defconfig
index c105560305..b2d5dc1c22 100644
--- a/configs/mx7dsabresd_qspi_defconfig
+++ b/configs/mx7dsabresd_qspi_defconfig
@@ -4,17 +4,18 @@  CONFIG_SYS_TEXT_BASE=0x87800000
 CONFIG_TARGET_MX7DSABRESD=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xC0000
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
 # CONFIG_ARMV7_VIRT is not set
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg"
+CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOUNCE_BUFFER=y
-CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_BOOTD is not set
-CONFIG_CMD_BOOTZ=y
 # CONFIG_BOOTM_NETBSD is not set
 # CONFIG_BOOTM_PLAN9 is not set
 # CONFIG_BOOTM_RTEMS is not set
@@ -29,17 +30,13 @@  CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb-qspi"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -84,7 +81,6 @@  CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_MXC_USB_OTG_HACTIVE=y
-CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index f574669644..b1726b1d88 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -74,76 +74,25 @@ 
 	"image=zImage\0" \
 	"console=ttymxc0\0" \
 	"fdt_high=0xffffffff\0" \
+	"finduuid=part uuid mmc 0:1 uuid\0" \
 	"initrd_high=0xffffffff\0" \
-	"fdt_file=imx7d-sdb.dtb\0" \
+	"fdtfile=imx7d-sdb.dtb\0" \
 	"fdt_addr=0x83000000\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
+	"fdt_addr_r=0x83000000\0" \
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"ramdisk_addr_r=0x83000000\0" \
+	"ramdiskaddr=0x83000000\0" \
+	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
 	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
-	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
-	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-		"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev};" \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(DHCP, dhcp, na) \
+	func(PXE, pxe, na)
+
+#include <config_distro_bootcmd.h>
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
@@ -187,7 +136,6 @@ 
 
 #define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
 #define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
-#define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
 
 /* USB Configs */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)