[v6,075/102] spi: ich: Add TPL support
diff mbox series

Message ID 20191206213936.v6.75.Iba43641899bae5ff03a0e22d967fb6e0d3ef0bb0@changeid
State Accepted
Delegated to: Bin Meng
Headers show
Series
  • x86: Add initial support for apollolake
Related show

Commit Message

Simon Glass Dec. 7, 2019, 4:42 a.m. UTC
In TPL we want to reduce code size and support running with CONFIG_PCI
disabled. Add special code to handle this using a fixed BAR programmed
into the SPI on boot. Also cache the SPI flash to speed up boot.

Signed-off-by: Simon Glass <sjg@chromium.org>

---

Changes in v6:
- Add a comment about why we should not use MTRR_TYPE_WRBACK
- Use SZ_4G instead of open-coding the size value

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/spi/ich.c | 48 +++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 44 insertions(+), 4 deletions(-)

Comments

Bin Meng Dec. 8, 2019, 3:58 a.m. UTC | #1
On Sat, Dec 7, 2019 at 12:52 PM Simon Glass <sjg@chromium.org> wrote:
>
> In TPL we want to reduce code size and support running with CONFIG_PCI
> disabled. Add special code to handle this using a fixed BAR programmed
> into the SPI on boot. Also cache the SPI flash to speed up boot.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
>
> ---
>
> Changes in v6:
> - Add a comment about why we should not use MTRR_TYPE_WRBACK
> - Use SZ_4G instead of open-coding the size value
>
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bin Meng Dec. 8, 2019, 4:26 a.m. UTC | #2
On Sun, Dec 8, 2019 at 11:58 AM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> On Sat, Dec 7, 2019 at 12:52 PM Simon Glass <sjg@chromium.org> wrote:
> >
> > In TPL we want to reduce code size and support running with CONFIG_PCI
> > disabled. Add special code to handle this using a fixed BAR programmed
> > into the SPI on boot. Also cache the SPI flash to speed up boot.
> >
> > Signed-off-by: Simon Glass <sjg@chromium.org>
> >
> > ---
> >
> > Changes in v6:
> > - Add a comment about why we should not use MTRR_TYPE_WRBACK
> > - Use SZ_4G instead of open-coding the size value
> >
> > Changes in v5: None
> > Changes in v4: None
> > Changes in v3: None
> > Changes in v2: None
> >
>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

applied to u-boot-x86/next, thanks!

Patch
diff mbox series

diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
index 160ec370fd..0cd073c03c 100644
--- a/drivers/spi/ich.c
+++ b/drivers/spi/ich.c
@@ -19,8 +19,11 @@ 
 #include <spi.h>
 #include <spi_flash.h>
 #include <spi-mem.h>
+#include <spl.h>
 #include <asm/fast_spi.h>
 #include <asm/io.h>
+#include <asm/mtrr.h>
+#include <linux/sizes.h>
 
 #include "ich.h"
 
@@ -115,6 +118,8 @@  static bool ich9_can_do_33mhz(struct udevice *dev)
 	struct ich_spi_priv *priv = dev_get_priv(dev);
 	u32 fdod, speed;
 
+	if (!CONFIG_IS_ENABLED(PCI))
+		return false;
 	/* Observe SPI Descriptor Component Section 0 */
 	dm_pci_write_config32(priv->pch, 0xb0, 0x1000);
 
@@ -706,6 +711,15 @@  static int ich_init_controller(struct udevice *dev,
 			       struct ich_spi_platdata *plat,
 			       struct ich_spi_priv *ctlr)
 {
+	if (spl_phase() == PHASE_TPL) {
+		struct ich_spi_platdata *plat = dev_get_platdata(dev);
+		int ret;
+
+		ret = fast_spi_early_init(plat->bdf, plat->mmio_base);
+		if (ret)
+			return ret;
+	}
+
 	ctlr->base = (void *)plat->mmio_base;
 	if (plat->ich_version == ICHV_7) {
 		struct ich7_spi_regs *ich7_spi = ctlr->base;
@@ -754,6 +768,26 @@  static int ich_init_controller(struct udevice *dev,
 	return 0;
 }
 
+static int ich_cache_bios_region(struct udevice *dev)
+{
+	ulong map_base;
+	uint map_size;
+	uint offset;
+	ulong base;
+	int ret;
+
+	ret = ich_get_mmap_bus(dev, &map_base, &map_size, &offset);
+	if (ret)
+		return ret;
+
+	/* Don't use WRBACK since we are not supposed to write to SPI flash */
+	base = SZ_4G - map_size;
+	mtrr_set_next_var(MTRR_TYPE_WRPROT, base, map_size);
+	log_debug("BIOS cache base=%lx, size=%x\n", base, (uint)map_size);
+
+	return 0;
+}
+
 static int ich_spi_probe(struct udevice *dev)
 {
 	struct ich_spi_platdata *plat = dev_get_platdata(dev);
@@ -764,10 +798,16 @@  static int ich_spi_probe(struct udevice *dev)
 	if (ret)
 		return ret;
 
-	ret = ich_protect_lockdown(dev);
-	if (ret)
-		return ret;
-
+	if (spl_phase() == PHASE_TPL) {
+		/* Cache the BIOS to speed things up */
+		ret = ich_cache_bios_region(dev);
+		if (ret)
+			return ret;
+	} else {
+		ret = ich_protect_lockdown(dev);
+		if (ret)
+			return ret;
+	}
 	priv->cur_speed = priv->max_speed;
 
 	return 0;