| Message ID | 20191205061034.32790-4-biwen.li@nxp.com |
|---|---|
| State | Superseded |
| Delegated to: | Priyanka Jain |
| Headers | show |
| Series | [v3,1/8] rtc: pcf8563: support driver model | expand |
>-----Original Message----- >From: Biwen Li <biwen.li@nxp.com> >Sent: Thursday, December 5, 2019 11:41 AM >To: Jagdish Gediya <jagdish.gediya@nxp.com>; Priyanka Jain ><priyanka.jain@nxp.com>; hs@denx.de; jagan@amarulasolutions.com; >aford173@gmail.com; Alison Wang <alison.wang@nxp.com>; >bhaskar.upadhaya@nxp.com; feng.li_2@nxp.com; jh80.chung@samsung.com; >Pramod Kumar <pramod.kumar_1@nxp.com>; Rajesh Bhagat ><rajesh.bhagat@nxp.com>; Ruchika Gupta <ruchika.gupta@nxp.com>; >olteanv@gmail.com >Cc: Xiaobo Xie <xiaobo.xie@nxp.com>; Jiafei Pan <jiafei.pan@nxp.com>; u- >boot@lists.denx.de; Biwen Li <biwen.li@nxp.com> >Subject: [v3 4/8] Kconfigs: layerscape: use a convenient default value for >SYS_MALLOC_F_LEN > >The default value of CONFIG_SYS_MALLOC_F_LEN (0x400) leaves U-Boot with >not enough memory to load i2c driver before relocate, causing it to hang. > >Change the default value of CONFIG_SYS_MALLOC_F_LEN for below SoCs, >- LS1012A >- LS1021A >- LS1043A >- LS1046A > >Signed-off-by: Biwen Li <biwen.li@nxp.com> >--- >Changes in v3: > - update commit messages > >Changes in v2: > - none > > Kconfig | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > >diff --git a/Kconfig b/Kconfig >index e22417ec44..3e6d9f26ea 100644 >--- a/Kconfig >+++ b/Kconfig >@@ -146,7 +146,9 @@ config SYS_MALLOC_F_LEN > default 0x1000 if AM33XX > default 0x2800 if SANDBOX > default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \ >- ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5) >+ ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \ >+ ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A >|| \ >+ ARCH_LS1046A) > default 0x400 > help > Before relocation, memory is very limited on many platforms. Still, >-- >2.17.1 Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/Kconfig b/Kconfig index e22417ec44..3e6d9f26ea 100644 --- a/Kconfig +++ b/Kconfig @@ -146,7 +146,9 @@ config SYS_MALLOC_F_LEN default 0x1000 if AM33XX default 0x2800 if SANDBOX default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \ - ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5) + ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \ + ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \ + ARCH_LS1046A) default 0x400 help Before relocation, memory is very limited on many platforms. Still,
The default value of CONFIG_SYS_MALLOC_F_LEN (0x400) leaves U-Boot with not enough memory to load i2c driver before relocate, causing it to hang. Change the default value of CONFIG_SYS_MALLOC_F_LEN for below SoCs, - LS1012A - LS1021A - LS1043A - LS1046A Signed-off-by: Biwen Li <biwen.li@nxp.com> --- Changes in v3: - update commit messages Changes in v2: - none Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)