diff mbox series

[v2,08/27] ocxl: Save the device serial number in ocxl_fn

Message ID 20191203034655.51561-9-alastair@au1.ibm.com (mailing list archive)
State Superseded
Headers show
Series Add support for OpenCAPI SCM devices | expand

Checks

Context Check Description
snowpatch_ozlabs/apply_patch success Successfully applied on branch powerpc/merge (2e6c4d7e1c5990fa2ccca6db0868a05640ac1df1)
snowpatch_ozlabs/checkpatch success total: 0 errors, 0 warnings, 0 checks, 65 lines checked
snowpatch_ozlabs/needsstable success Patch has no Fixes tags

Commit Message

Alastair D'Silva Dec. 3, 2019, 3:46 a.m. UTC 
From: Alastair D'Silva <alastair@d-silva.org>

This patch retrieves the serial number of the card and makes it available
to consumers of the ocxl driver via the ocxl_fn struct.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
---
 drivers/misc/ocxl/config.c | 46 ++++++++++++++++++++++++++++++++++++++
 include/misc/ocxl.h        |  1 +
 2 files changed, 47 insertions(+)

Comments

Jonathan Cameron Feb. 3, 2020, 12:53 p.m. UTC | #1 
On Tue, 3 Dec 2019 14:46:36 +1100
Alastair D'Silva <alastair@au1.ibm.com> wrote:

> From: Alastair D'Silva <alastair@d-silva.org>
> 
> This patch retrieves the serial number of the card and makes it available
> to consumers of the ocxl driver via the ocxl_fn struct.
> 
> Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
> Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
> ---
>  drivers/misc/ocxl/config.c | 46 ++++++++++++++++++++++++++++++++++++++
>  include/misc/ocxl.h        |  1 +
>  2 files changed, 47 insertions(+)
> 
> diff --git a/drivers/misc/ocxl/config.c b/drivers/misc/ocxl/config.c
> index fb0c3b6f8312..a9203c309365 100644
> --- a/drivers/misc/ocxl/config.c
> +++ b/drivers/misc/ocxl/config.c
> @@ -71,6 +71,51 @@ static int find_dvsec_afu_ctrl(struct pci_dev *dev, u8 afu_idx)
>  	return 0;
>  }
>  
> +/**

Make sure anything you mark as kernel doc with /** is valid
kernel-doc.

> + * Find a related PCI device (function 0)
> + * @device: PCI device to match
> + *
> + * Returns a pointer to the related device, or null if not found
> + */
> +static struct pci_dev *get_function_0(struct pci_dev *dev)
> +{
> +	unsigned int devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0); // Look for function 0

Not sure the trailing comment adds much.

I'd personally not bother with this wrapper at all and just call
the pci functions directly where needed.

> +
> +	return pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus),
> +					dev->bus->number, devfn);
> +}
> +
> +static void read_serial(struct pci_dev *dev, struct ocxl_fn_config *fn)
> +{
> +	u32 low, high;
> +	int pos;
> +
> +	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DSN);
> +	if (pos) {
> +		pci_read_config_dword(dev, pos + 0x04, &low);
> +		pci_read_config_dword(dev, pos + 0x08, &high);
> +
> +		fn->serial = low | ((u64)high) << 32;
> +
> +		return;
> +	}
> +
> +	if (PCI_FUNC(dev->devfn) != 0) {
> +		struct pci_dev *related = get_function_0(dev);
> +
> +		if (!related) {
> +			fn->serial = 0;
> +			return;
> +		}
> +
> +		read_serial(related, fn);
> +		pci_dev_put(related);
> +		return;
> +	}
> +
> +	fn->serial = 0;
> +}
> +
>  static void read_pasid(struct pci_dev *dev, struct ocxl_fn_config *fn)
>  {
>  	u16 val;
> @@ -208,6 +253,7 @@ int ocxl_config_read_function(struct pci_dev *dev, struct ocxl_fn_config *fn)
>  	int rc;
>  
>  	read_pasid(dev, fn);
> +	read_serial(dev, fn);
>  
>  	rc = read_dvsec_tl(dev, fn);
>  	if (rc) {
> diff --git a/include/misc/ocxl.h b/include/misc/ocxl.h
> index 6f7c02f0d5e3..9843051c3c5b 100644
> --- a/include/misc/ocxl.h
> +++ b/include/misc/ocxl.h
> @@ -46,6 +46,7 @@ struct ocxl_fn_config {
>  	int dvsec_afu_info_pos; /* offset of the AFU information DVSEC */
>  	s8 max_pasid_log;
>  	s8 max_afu_index;
> +	u64 serial;
>  };
>  
>  enum ocxl_endian {
Alastair D'Silva Feb. 19, 2020, 4:03 a.m. UTC | #2 
On Mon, 2020-02-03 at 12:53 +0000, Jonathan Cameron wrote:
> On Tue, 3 Dec 2019 14:46:36 +1100
> Alastair D'Silva <alastair@au1.ibm.com> wrote:
> 
> > From: Alastair D'Silva <alastair@d-silva.org>
> > 
> > This patch retrieves the serial number of the card and makes it
> > available
> > to consumers of the ocxl driver via the ocxl_fn struct.
> > 
> > Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> > Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
> > Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
> > ---
> >  drivers/misc/ocxl/config.c | 46
> > ++++++++++++++++++++++++++++++++++++++
> >  include/misc/ocxl.h        |  1 +
> >  2 files changed, 47 insertions(+)
> > 
> > diff --git a/drivers/misc/ocxl/config.c
> > b/drivers/misc/ocxl/config.c
> > index fb0c3b6f8312..a9203c309365 100644
> > --- a/drivers/misc/ocxl/config.c
> > +++ b/drivers/misc/ocxl/config.c
> > @@ -71,6 +71,51 @@ static int find_dvsec_afu_ctrl(struct pci_dev
> > *dev, u8 afu_idx)
> >  	return 0;
> >  }
> >  
> > +/**
> 
> Make sure anything you mark as kernel doc with /** is valid
> kernel-doc.
> 

Ok

> > + * Find a related PCI device (function 0)
> > + * @device: PCI device to match
> > + *
> > + * Returns a pointer to the related device, or null if not found
> > + */
> > +static struct pci_dev *get_function_0(struct pci_dev *dev)
> > +{
> > +	unsigned int devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0); //
> > Look for function 0
> 
> Not sure the trailing comment adds much.
> 
> I'd personally not bother with this wrapper at all and just call
> the pci functions directly where needed.
> 

I'm not that familiar with the macros, so its not immediately obvious
to me what it's doing, so my preference is to leave it.
> > +
> > +	return pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus),
> > +					dev->bus->number, devfn);
> > +}
> > +
> > +static void read_serial(struct pci_dev *dev, struct ocxl_fn_config
> > *fn)
> > +{
> > +	u32 low, high;
> > +	int pos;
> > +
> > +	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DSN);
> > +	if (pos) {
> > +		pci_read_config_dword(dev, pos + 0x04, &low);
> > +		pci_read_config_dword(dev, pos + 0x08, &high);
> > +
> > +		fn->serial = low | ((u64)high) << 32;
> > +
> > +		return;
> > +	}
> > +
> > +	if (PCI_FUNC(dev->devfn) != 0) {
> > +		struct pci_dev *related = get_function_0(dev);
> > +
> > +		if (!related) {
> > +			fn->serial = 0;
> > +			return;
> > +		}
> > +
> > +		read_serial(related, fn);
> > +		pci_dev_put(related);
> > +		return;
> > +	}
> > +
> > +	fn->serial = 0;
> > +}
> > +
> >  static void read_pasid(struct pci_dev *dev, struct ocxl_fn_config
> > *fn)
> >  {
> >  	u16 val;
> > @@ -208,6 +253,7 @@ int ocxl_config_read_function(struct pci_dev
> > *dev, struct ocxl_fn_config *fn)
> >  	int rc;
> >  
> >  	read_pasid(dev, fn);
> > +	read_serial(dev, fn);
> >  
> >  	rc = read_dvsec_tl(dev, fn);
> >  	if (rc) {
> > diff --git a/include/misc/ocxl.h b/include/misc/ocxl.h
> > index 6f7c02f0d5e3..9843051c3c5b 100644
> > --- a/include/misc/ocxl.h
> > +++ b/include/misc/ocxl.h
> > @@ -46,6 +46,7 @@ struct ocxl_fn_config {
> >  	int dvsec_afu_info_pos; /* offset of the AFU information DVSEC
> > */
> >  	s8 max_pasid_log;
> >  	s8 max_afu_index;
> > +	u64 serial;
> >  };
> >  
> >  enum ocxl_endian {
diff mbox series

Patch

diff --git a/drivers/misc/ocxl/config.c b/drivers/misc/ocxl/config.c
index fb0c3b6f8312..a9203c309365 100644
--- a/drivers/misc/ocxl/config.c
+++ b/drivers/misc/ocxl/config.c
@@ -71,6 +71,51 @@  static int find_dvsec_afu_ctrl(struct pci_dev *dev, u8 afu_idx)
 	return 0;
 }
 
+/**
+ * Find a related PCI device (function 0)
+ * @device: PCI device to match
+ *
+ * Returns a pointer to the related device, or null if not found
+ */
+static struct pci_dev *get_function_0(struct pci_dev *dev)
+{
+	unsigned int devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0); // Look for function 0
+
+	return pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus),
+					dev->bus->number, devfn);
+}
+
+static void read_serial(struct pci_dev *dev, struct ocxl_fn_config *fn)
+{
+	u32 low, high;
+	int pos;
+
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DSN);
+	if (pos) {
+		pci_read_config_dword(dev, pos + 0x04, &low);
+		pci_read_config_dword(dev, pos + 0x08, &high);
+
+		fn->serial = low | ((u64)high) << 32;
+
+		return;
+	}
+
+	if (PCI_FUNC(dev->devfn) != 0) {
+		struct pci_dev *related = get_function_0(dev);
+
+		if (!related) {
+			fn->serial = 0;
+			return;
+		}
+
+		read_serial(related, fn);
+		pci_dev_put(related);
+		return;
+	}
+
+	fn->serial = 0;
+}
+
 static void read_pasid(struct pci_dev *dev, struct ocxl_fn_config *fn)
 {
 	u16 val;
@@ -208,6 +253,7 @@  int ocxl_config_read_function(struct pci_dev *dev, struct ocxl_fn_config *fn)
 	int rc;
 
 	read_pasid(dev, fn);
+	read_serial(dev, fn);
 
 	rc = read_dvsec_tl(dev, fn);
 	if (rc) {
diff --git a/include/misc/ocxl.h b/include/misc/ocxl.h
index 6f7c02f0d5e3..9843051c3c5b 100644
--- a/include/misc/ocxl.h
+++ b/include/misc/ocxl.h
@@ -46,6 +46,7 @@  struct ocxl_fn_config {
 	int dvsec_afu_info_pos; /* offset of the AFU information DVSEC */
 	s8 max_pasid_log;
 	s8 max_afu_index;
+	u64 serial;
 };
 
 enum ocxl_endian {