Comments
Patch
@@ -55,6 +55,10 @@
#define S5PC110_VIC1_BASE 0xF2100000
#define S5PC110_VIC2_BASE 0xF2200000
#define S5PC110_VIC3_BASE 0xF2300000
+#define S5PC110_OTG_BASE 0xEC000000
+#define S5PC110_PHY_BASE 0xEC100000
+#define S5PC110_USB_PHY_CONTROL 0xE010E80C
+
#ifndef __ASSEMBLY__
#include <asm/io.h>
new file mode 100644
@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_HSOTG_H_
+#define __ASM_ARCH_HSOTG_H_
+
+#ifndef __ASSEMBLY__
+struct s3c_plat_otg_data {
+ int (*phy_control)(int on);
+ unsigned int regs_phy;
+ unsigned int regs_otg;
+};
+
+#endif /* __ASSEMBLY__ */
+#endif
@@ -26,7 +26,9 @@
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <pmic.h>
-
+#include <asm/arch/hs_otg.h>
+#include <asm/arch/cpu.h>
+#include <max8998_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
static struct s5pc110_gpio *s5pc110_gpio;
@@ -100,3 +102,46 @@ int board_mmc_init(bd_t *bis)
return s5p_mmc_init(0, 4);
}
#endif
+
+#ifdef CONFIG_USB_GADGET
+static int s5pc1xx_phy_control(int on)
+{
+ int ret;
+ static int status;
+ struct pmic *p = get_pmic();
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (on && !status) {
+ ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_ON);
+ ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_ON);
+ if (ret) {
+ puts("MAX8998 LDO setting error!\n");
+ return -1;
+ }
+ status = 1;
+ } else if (!on && status) {
+ ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_OFF);
+ ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_OFF);
+ if (ret) {
+ puts("MAX8998 LDO setting error!\n");
+ return -1;
+ }
+ status = 0;
+ }
+ udelay(10000);
+
+ return 0;
+}
+
+struct s3c_plat_otg_data s5pc110_otg_data = {
+ .phy_control = s5pc1xx_phy_control,
+ .regs_phy = S5PC110_PHY_BASE,
+ .regs_otg = S5PC110_OTG_BASE,
+};
+#endif
@@ -240,5 +240,8 @@
#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 7
+#define CONFIG_USB_GADGET 1
+#define CONFIG_USB_GADGET_S3C_UDC_OTG 1
+#define CONFIG_USB_GADGET_DUALSPEED 1
#endif /* __CONFIG_H */