@@ -66,6 +66,15 @@ Sub-nodes:
details of individual regulator device can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt
+ Optional regulator device-specific properties:
+ - dlg,vsel-sense-gpios : The GPIO reference which should be used by the
+ regulator to switch the voltage between active/suspend voltage settings. If
+ the signal is active the active-settings are applied else the suspend
+ settings are applied. Attention: Sharing the same gpio for other purposes
+ or across multiple regulators is possible but the gpio settings must be the
+ same. Also the gpio phandle must refer to the mfd root node other gpios are
+ not allowed and make no sense.
+
- rtc : This node defines settings required for the Real-Time Clock associated
with the DA9062. There are currently no entries in this binding, however
compatible = "dlg,da9062-rtc" should be added if a node is created.
Add the documentation which describe the voltage selection gpio support. This property can be applied to each subnode within the 'regulators' node so each regulator can be configured differently. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- Documentation/devicetree/bindings/mfd/da9062.txt | 9 +++++++++ 1 file changed, 9 insertions(+)