[4.14/4.19,1/2] net: phy: dp83867: fix speed 10 in sgmii mode
diff mbox series

Message ID 20191126140406.6451-1-bunk@kernel.org
State Not Applicable
Delegated to: David Miller
Headers show
Series
  • [4.14/4.19,1/2] net: phy: dp83867: fix speed 10 in sgmii mode
Related show

Commit Message

Adrian Bunk Nov. 26, 2019, 2:04 p.m. UTC
From: Max Uvarov <muvarov@gmail.com>

Commit 333061b924539c0de081339643f45514f5f1c1e6 upstream.

For supporting 10Mps speed in SGMII mode DP83867_10M_SGMII_RATE_ADAPT bit
of DP83867_10M_SGMII_CFG register has to be cleared by software.
That does not affect speeds 100 and 1000 so can be done on init.

Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ adapted for kernels without phy_modify_mmd ]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
---
- already in 5.3
- applies and builds against 4.14 and 4.19
- tested with 4.14
---
 drivers/net/phy/dp83867.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Sasha Levin Nov. 27, 2019, 2:31 a.m. UTC | #1
On Tue, Nov 26, 2019 at 04:04:05PM +0200, Adrian Bunk wrote:
>From: Max Uvarov <muvarov@gmail.com>
>
>Commit 333061b924539c0de081339643f45514f5f1c1e6 upstream.
>
>For supporting 10Mps speed in SGMII mode DP83867_10M_SGMII_RATE_ADAPT bit
>of DP83867_10M_SGMII_CFG register has to be cleared by software.
>That does not affect speeds 100 and 1000 so can be done on init.
>
>Signed-off-by: Max Uvarov <muvarov@gmail.com>
>Cc: Heiner Kallweit <hkallweit1@gmail.com>
>Cc: Florian Fainelli <f.fainelli@gmail.com>
>Cc: Andrew Lunn <andrew@lunn.ch>
>Signed-off-by: David S. Miller <davem@davemloft.net>
>[ adapted for kernels without phy_modify_mmd ]
>Signed-off-by: Adrian Bunk <bunk@kernel.org>
>---
>- already in 5.3
>- applies and builds against 4.14 and 4.19
>- tested with 4.14

Looks like Greg took these in, thanks!

Patch
diff mbox series

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 12b09e6e03ba..81106314e6da 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -37,6 +37,8 @@ 
 #define DP83867_STRAP_STS1	0x006E
 #define DP83867_RGMIIDCTL	0x0086
 #define DP83867_IO_MUX_CFG	0x0170
+#define DP83867_10M_SGMII_CFG   0x016F
+#define DP83867_10M_SGMII_RATE_ADAPT_MASK BIT(7)
 
 #define DP83867_SW_RESET	BIT(15)
 #define DP83867_SW_RESTART	BIT(14)
@@ -283,6 +285,23 @@  static int dp83867_config_init(struct phy_device *phydev)
 		}
 	}
 
+	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+		/* For support SPEED_10 in SGMII mode
+		 * DP83867_10M_SGMII_RATE_ADAPT bit
+		 * has to be cleared by software. That
+		 * does not affect SPEED_100 and
+		 * SPEED_1000.
+		 */
+		val = phy_read_mmd(phydev, DP83867_DEVADDR,
+				   DP83867_10M_SGMII_CFG);
+		val &= ~DP83867_10M_SGMII_RATE_ADAPT_MASK;
+		ret = phy_write_mmd(phydev, DP83867_DEVADDR,
+				    DP83867_10M_SGMII_CFG, val);
+
+		if (ret)
+			return ret;
+	}
+
 	/* Enable Interrupt output INT_OE in CFG3 register */
 	if (phy_interrupt_is_valid(phydev)) {
 		val = phy_read(phydev, DP83867_CFG3);