deleted file mode 100644
@@ -1,47 +0,0 @@
-* STMicroelectronics Quad Serial Peripheral Interface(QSPI)
-
-Required properties:
-- compatible: should be "st,stm32f469-qspi"
-- reg: the first contains the register location and length.
- the second contains the memory mapping address and length
-- reg-names: should contain the reg names "qspi" "qspi_mm"
-- interrupts: should contain the interrupt for the device
-- clocks: the phandle of the clock needed by the QSPI controller
-- A pinctrl must be defined to set pins in mode of operation for QSPI transfer
-
-Optional properties:
-- resets: must contain the phandle to the reset controller.
-
-A spi flash (NOR/NAND) must be a child of spi node and could have some
-properties. Also see jedec,spi-nor.txt.
-
-Required properties:
-- reg: chip-Select number (QSPI controller may connect 2 flashes)
-- spi-max-frequency: max frequency of spi bus
-
-Optional properties:
-- spi-rx-bus-width: see ./spi-bus.txt for the description
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-Documentation/devicetree/bindings/dma/dma.txt.
-- dma-names: DMA request names should include "tx" and "rx" if present.
-
-Example:
-
-qspi: spi@a0001000 {
- compatible = "st,stm32f469-qspi";
- reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>;
- reg-names = "qspi", "qspi_mm";
- interrupts = <91>;
- resets = <&rcc STM32F4_AHB3_RESET(QSPI)>;
- clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_qspi0>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-rx-bus-width = <4>;
- spi-max-frequency = <108000000>;
- ...
- };
-};
new file mode 100644
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,stm32-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Quad Serial Peripheral Interface (QSPI) bindings
+
+maintainers:
+ - Christophe Kerello <christophe.kerello@st.com>
+ - Patrice Chotard <patrice.chotard@st.com>
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+properties:
+ compatible:
+ const: st,stm32f469-qspi
+
+ reg:
+ items:
+ - description: registers
+ - description: memory mapping
+
+ reg-names:
+ items:
+ - const: qspi
+ - const: qspi_mm
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: tx DMA channel
+ - description: rx DMA channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
+ <&mdma1 22 0x10 0x100008 0x0 0x0>;
+ dma-names = "tx", "rx";
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ };
+ };
+
+...
Convert the STM32 QSPI binding to DT schema format using json-schema Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> --- changes in version 2: - fix subject - remove useless minItems and maxItems .../devicetree/bindings/spi/spi-stm32-qspi.txt | 47 ------------ .../devicetree/bindings/spi/st,stm32-qspi.yaml | 83 ++++++++++++++++++++++ 2 files changed, 83 insertions(+), 47 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt create mode 100644 Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml