new file mode 100755
@@ -0,0 +1,318 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+ same_speeds_autoneg_off
+ different_speeds_autoneg_off
+ combination_of_neg_on_and_off
+ advertise_subset_of_speeds
+ check_highest_speed_is_chosen
+ different_speeds_autoneg_on
+"
+NUM_NETIFS=2
+source lib.sh
+source ethtool_lib.sh
+
+h1_create()
+{
+ simple_if_init $h1 192.0.2.1/24
+}
+
+h1_destroy()
+{
+ simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+ simple_if_init $h2 192.0.2.2/24
+}
+
+h2_destroy()
+{
+ simple_if_fini $h2 192.0.2.2/24
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ h2=${NETIFS[p2]}
+
+ h1_create
+ h2_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ h2_destroy
+ h1_destroy
+}
+
+different_speeds_get()
+{
+ local dev1=$1; shift
+ local dev2=$1; shift
+ local with_mode=$1; shift
+ local adver=$1; shift
+
+ local -a speeds_arr
+
+ speeds_arr=($(common_speeds_get $dev1 $dev2 $with_mode $adver))
+ if [[ ${#speeds_arr[@]} < 2 ]]; then
+ check_err 1 "cannot check different speeds. There are not enough speeds"
+ fi
+
+ echo ${speeds_arr[0]} ${speeds_arr[1]}
+}
+
+same_speeds_autoneg_off()
+{
+ # Check that when each of the reported speeds is forced, the links come
+ # up and are operational.
+ local -a speeds_arr=($(common_speeds_get $h1 $h2 0 0))
+
+ for speed in "${speeds_arr[@]}"; do
+ RET=0
+ ethtool_set $h1 speed $speed autoneg off
+ ethtool_set $h2 speed $speed autoneg off
+
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ ping_do $h1 192.0.2.2
+ check_err $? "speed $speed autoneg off"
+ log_test "force of same speed autoneg off"
+ log_info "speed = $speed"
+ done
+
+ ethtool -s $h2 autoneg on
+ ethtool -s $h1 autoneg on
+}
+
+different_speeds_autoneg_off()
+{
+ # Test that when we force different speeds, links are not up and ping
+ # fails.
+ RET=0
+
+ local -a speeds_arr=($(different_speeds_get $h1 $h2 0 0))
+ local speed1=${speeds_arr[0]}
+ local speed2=${speeds_arr[1]}
+
+ ethtool_set $h1 speed $speed1 autoneg off
+ ethtool_set $h2 speed $speed2 autoneg off
+
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ ping_do $h1 192.0.2.2
+ check_fail $? "ping with different speeds"
+
+ log_test "force of different speeds autoneg off"
+
+ ethtool -s $h2 autoneg on
+ ethtool -s $h1 autoneg on
+}
+
+combination_of_neg_on_and_off()
+{
+ # Test that when one device is forced to a speed supported by both
+ # endpoints and the other device is configured to autoneg on, the links
+ # are up and ping passes.
+ local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))
+
+ for speed in "${speeds_arr[@]}"; do
+ RET=0
+ ethtool_set $h1 speed $speed autoneg off
+
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ ping_do $h1 192.0.2.2
+ check_err $? "h1-speed=$speed autoneg off, h2 autoneg on"
+ log_test "one side with autoneg off and another with autoneg on"
+ log_info "force speed = $speed"
+ done
+
+ ethtool -s $h1 autoneg on
+}
+
+hex_speed_value_get()
+{
+ local speed=$1; shift
+
+ local shift_size=${speed_values[$speed]}
+ speed=$((0x1 << $"shift_size"))
+ printf "%#x" "$speed"
+}
+
+subset_of_common_speeds_get()
+{
+ local dev1=$1; shift
+ local dev2=$1; shift
+ local adver=$1; shift
+
+ local -a speeds_arr=($(common_speeds_get $dev1 $dev2 0 $adver))
+ local speed_to_advertise=0
+ local speed_to_remove=${speeds_arr[0]}
+ speed_to_remove+='base'
+
+ local -a speeds_mode_arr=($(common_speeds_get $dev1 $dev2 1 $adver))
+
+ for speed in ${speeds_mode_arr[@]}; do
+ if [[ $speed != $speed_to_remove* ]]; then
+ speed=$(hex_speed_value_get $speed)
+ speed_to_advertise=$(($speed_to_advertise | \
+ $speed))
+ fi
+
+ done
+
+ # Convert to hex.
+ printf "%#x" "$speed_to_advertise"
+}
+
+speed_to_advertise_get()
+{
+ # The function returns the hex number that is composed by OR-ing all
+ # the modes corresponding to the provided speed.
+ local speed_without_mode=$1; shift
+ local supported_speeds=("$@"); shift
+ local speed_to_advertise=0
+
+ speed_without_mode+='base'
+
+ for speed in ${supported_speeds[@]}; do
+ if [[ $speed == $speed_without_mode* ]]; then
+ speed=$(hex_speed_value_get $speed)
+ speed_to_advertise=$(($speed_to_advertise | \
+ $speed))
+ fi
+
+ done
+
+ # Convert to hex.
+ printf "%#x" "$speed_to_advertise"
+}
+
+advertise_subset_of_speeds()
+{
+ # Test that when one device advertises a subset of speeds and another
+ # advertises a specific speed (but all modes of this speed), the links
+ # are up and ping passes.
+ RET=0
+
+ local speed_1_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)
+ ethtool_set $h1 advertise $speed_1_to_advertise
+
+ if [ $RET != 0 ]; then
+ log_test "advertise subset of speeds"
+ return
+ fi
+
+ local -a speeds_arr_without_mode=($(common_speeds_get $h1 $h2 0 1))
+ # Check only speeds that h1 advertised. Remove the first speed.
+ unset speeds_arr_without_mode[0]
+ local -a speeds_arr_with_mode=($(common_speeds_get $h1 $h2 1 1))
+
+ for speed_value in ${speeds_arr_without_mode[@]}; do
+ RET=0
+ local speed_2_to_advertise=$(speed_to_advertise_get $speed_value \
+ "${speeds_arr_with_mode[@]}")
+ ethtool_set $h2 advertise $speed_2_to_advertise
+
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ ping_do $h1 192.0.2.2
+ check_err $? "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)"
+
+ log_test "advertise subset of speeds"
+ log_info "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise"
+ done
+
+ ethtool -s $h2 autoneg on
+ ethtool -s $h1 autoneg on
+}
+
+check_highest_speed_is_chosen()
+{
+ # Test that when one device advertises a subset of speeds, the other
+ # chooses the highest speed. This test checks configuration without
+ # traffic.
+ RET=0
+
+ local max_speed
+ local chosen_speed
+ local speed_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)
+
+ ethtool_set $h1 advertise $speed_to_advertise
+
+ if [ $RET != 0 ]; then
+ log_test "check highest speed"
+ return
+ fi
+
+ local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))
+ # Remove the first speed, h1 does not advertise this speed.
+ unset speeds_arr[0]
+
+ max_speed=${speeds_arr[0]}
+ for current in ${speeds_arr[@]}; do
+ if [[ $current -gt $max_speed ]]; then
+ max_speed=$current
+ fi
+ done
+
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ chosen_speed=$(ethtool $h1 | grep 'Speed:')
+ chosen_speed=${chosen_speed%"Mb/s"*}
+ chosen_speed=${chosen_speed#*"Speed: "}
+ ((chosen_speed == max_speed))
+ check_err $? "h1 advertise $speed_to_advertise, h2 sync to speed $chosen_speed"
+
+ log_test "check highest speed"
+
+ ethtool -s $h2 autoneg on
+ ethtool -s $h1 autoneg on
+}
+
+different_speeds_autoneg_on()
+{
+ # Test that when we configure links to advertise different speeds,
+ # links are not up and ping fails.
+ RET=0
+
+ local -a speeds=($(different_speeds_get $h1 $h2 1 1))
+ local speed1=${speeds[0]}
+ local speed2=${speeds[1]}
+
+ speed1=$(hex_speed_value_get $speed1)
+ speed2=$(hex_speed_value_get $speed2)
+
+ ethtool_set $h1 advertise $speed1
+ ethtool_set $h2 advertise $speed2
+
+ if (($RET)); then
+ setup_wait_dev_with_timeout $h1
+ setup_wait_dev_with_timeout $h2
+ ping_do $h1 192.0.2.2
+ check_fail $? "ping with different speeds autoneg on"
+ fi
+
+ log_test "advertise different speeds autoneg on"
+
+ ethtool -s $h2 autoneg on
+ ethtool -s $h1 autoneg on
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+declare -gA speed_values
+eval "speed_values=($(speeds_arr_get))"
+
+tests_run
+
+exit $EXIT_STATUS