diff mbox series

[net] mlxsw: spectrum_router: Fix determining underlay for a GRE tunnel

Message ID 20191118071842.31712-1-idosch@idosch.org
State Accepted
Delegated to: David Miller
Headers show
Series [net] mlxsw: spectrum_router: Fix determining underlay for a GRE tunnel | expand

Commit Message

Ido Schimmel Nov. 18, 2019, 7:18 a.m. UTC
From: Petr Machata <petrm@mellanox.com>

The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a
GRE tunnel. For a tunnel without a bound device, it uses the same VRF that
the tunnel is in. However in Linux, a GRE tunnel without a bound device
uses the main VRF as the underlay. Fix the function accordingly.

mlxsw further assumed that moving a tunnel to a different VRF could cause
conflict in local tunnel endpoint address, which cannot be offloaded.
However, the only way that an underlay could be changed by moving the
tunnel device itself is if the tunnel device does not have a bound device.
But in that case the underlay is always the main VRF, so there is no
opportunity to introduce a conflict by moving such device. Thus this check
constitutes a dead code, and can be removed, which do.

Fixes: 6ddb7426a7d4 ("mlxsw: spectrum_router: Introduce loopback RIFs")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
 .../ethernet/mellanox/mlxsw/spectrum_router.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

Comments

David Miller Nov. 19, 2019, 1:10 a.m. UTC | #1
From: Ido Schimmel <idosch@idosch.org>
Date: Mon, 18 Nov 2019 09:18:42 +0200

> From: Petr Machata <petrm@mellanox.com>
> 
> The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a
> GRE tunnel. For a tunnel without a bound device, it uses the same VRF that
> the tunnel is in. However in Linux, a GRE tunnel without a bound device
> uses the main VRF as the underlay. Fix the function accordingly.
> 
> mlxsw further assumed that moving a tunnel to a different VRF could cause
> conflict in local tunnel endpoint address, which cannot be offloaded.
> However, the only way that an underlay could be changed by moving the
> tunnel device itself is if the tunnel device does not have a bound device.
> But in that case the underlay is always the main VRF, so there is no
> opportunity to introduce a conflict by moving such device. Thus this check
> constitutes a dead code, and can be removed, which do.
> 
> Fixes: 6ddb7426a7d4 ("mlxsw: spectrum_router: Introduce loopback RIFs")
> Signed-off-by: Petr Machata <petrm@mellanox.com>
> Signed-off-by: Ido Schimmel <idosch@mellanox.com>

Applied and queued up for -stable.
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
index a330b369e899..39d600c8b92d 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
@@ -994,7 +994,7 @@  u32 mlxsw_sp_ipip_dev_ul_tb_id(const struct net_device *ol_dev)
 	if (d)
 		return l3mdev_fib_table(d) ? : RT_TABLE_MAIN;
 	else
-		return l3mdev_fib_table(ol_dev) ? : RT_TABLE_MAIN;
+		return RT_TABLE_MAIN;
 }
 
 static struct mlxsw_sp_rif *
@@ -1598,27 +1598,10 @@  static int mlxsw_sp_netdevice_ipip_ol_vrf_event(struct mlxsw_sp *mlxsw_sp,
 {
 	struct mlxsw_sp_ipip_entry *ipip_entry =
 		mlxsw_sp_ipip_entry_find_by_ol_dev(mlxsw_sp, ol_dev);
-	enum mlxsw_sp_l3proto ul_proto;
-	union mlxsw_sp_l3addr saddr;
-	u32 ul_tb_id;
 
 	if (!ipip_entry)
 		return 0;
 
-	/* For flat configuration cases, moving overlay to a different VRF might
-	 * cause local address conflict, and the conflicting tunnels need to be
-	 * demoted.
-	 */
-	ul_tb_id = mlxsw_sp_ipip_dev_ul_tb_id(ol_dev);
-	ul_proto = mlxsw_sp->router->ipip_ops_arr[ipip_entry->ipipt]->ul_proto;
-	saddr = mlxsw_sp_ipip_netdev_saddr(ul_proto, ol_dev);
-	if (mlxsw_sp_ipip_demote_tunnel_by_saddr(mlxsw_sp, ul_proto,
-						 saddr, ul_tb_id,
-						 ipip_entry)) {
-		mlxsw_sp_ipip_entry_demote_tunnel(mlxsw_sp, ipip_entry);
-		return 0;
-	}
-
 	return __mlxsw_sp_ipip_entry_update_tunnel(mlxsw_sp, ipip_entry,
 						   true, false, false, extack);
 }