diff mbox series

[v2,2/3] pwm: jz4740: Obtain regmap from parent node

Message ID 20191116173613.72647-3-paul@crapouillou.net
State Superseded
Headers show
Series pwm: jz4740: Update to use TCU clocks/regmap | expand

Commit Message

Paul Cercueil Nov. 16, 2019, 5:36 p.m. UTC
The TCU registers are shared between a handful of drivers, accessing
them through the same regmap.

While this driver is devicetree-compatible, it is never (as of now)
probed from devicetree, so this change does not introduce a ABI problem
with current devicetree files.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---

Notes:
    v2: This patch is now after the patch introducing TCU clocks, so the code
        changed a bit.

 drivers/pwm/Kconfig      |  1 +
 drivers/pwm/pwm-jz4740.c | 70 ++++++++++++++++++++++++++--------------
 2 files changed, 46 insertions(+), 25 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index e998e5cb01b0..b6cbfb97e85f 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -226,6 +226,7 @@  config PWM_JZ4740
 	tristate "Ingenic JZ47xx PWM support"
 	depends on MACH_INGENIC
 	depends on COMMON_CLK
+	select MFD_SYSCON
 	help
 	  Generic PWM framework driver for Ingenic JZ47xx based
 	  machines.
diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
index fd83644f9323..a5368b98652d 100644
--- a/drivers/pwm/pwm-jz4740.c
+++ b/drivers/pwm/pwm-jz4740.c
@@ -13,17 +13,19 @@ 
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/kernel.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
-
-#include <asm/mach-jz4740/timer.h>
+#include <linux/regmap.h>
 
 #define NUM_PWM 8
 
 struct jz4740_pwm_chip {
 	struct pwm_chip chip;
+	struct regmap *map;
 };
 
 static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
@@ -64,9 +66,10 @@  static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 
 static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
+	struct jz4740_pwm_chip *jz = to_jz4740(chip);
 	struct clk *clk = pwm_get_chip_data(pwm);
 
-	jz4740_timer_set_ctrl(pwm->hwpwm, 0);
+	regmap_write(jz->map, TCU_REG_TCSRc(pwm->hwpwm), 0);
 
 	clk_disable_unprepare(clk);
 	clk_put(clk);
@@ -74,36 +77,39 @@  static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 
 static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm);
+	struct jz4740_pwm_chip *jz = to_jz4740(chip);
 
-	ctrl |= JZ_TIMER_CTRL_PWM_ENABLE;
-	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
-	jz4740_timer_enable(pwm->hwpwm);
+	/* Enable PWM output */
+	regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+			   TCU_TCSR_PWM_EN, TCU_TCSR_PWM_EN);
+
+	/* Start counter */
+	regmap_write(jz->map, TCU_REG_TESR, BIT(pwm->hwpwm));
 
 	return 0;
 }
 
 static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
+	struct jz4740_pwm_chip *jz = to_jz4740(chip);
 
 	/*
 	 * Set duty > period. This trick allows the TCU channels in TCU2 mode to
 	 * properly return to their init level.
 	 */
-	jz4740_timer_set_duty(pwm->hwpwm, 0xffff);
-	jz4740_timer_set_period(pwm->hwpwm, 0x0);
+	regmap_write(jz->map, TCU_REG_TDHRc(pwm->hwpwm), 0xffff);
+	regmap_write(jz->map, TCU_REG_TDFRc(pwm->hwpwm), 0x0);
 
 	/*
 	 * Disable PWM output.
 	 * In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the
 	 * counter is stopped, while in TCU1 mode the order does not matter.
 	 */
-	ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE;
-	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+	regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+			   TCU_TCSR_PWM_EN, 0);
 
 	/* Stop counter */
-	jz4740_timer_disable(pwm->hwpwm);
+	regmap_write(jz->map, TCU_REG_TECR, BIT(pwm->hwpwm));
 }
 
 static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -115,7 +121,6 @@  static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long rate, period, duty;
 	unsigned long long tmp;
 	unsigned int prescaler = 0;
-	uint16_t ctrl;
 
 	rate = clk_get_rate(parent_clk);
 	tmp = (unsigned long long)rate * state->period;
@@ -142,24 +147,32 @@  static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	clk_set_rate(clk, rate);
 
-	jz4740_timer_set_count(pwm->hwpwm, 0);
-	jz4740_timer_set_duty(pwm->hwpwm, duty);
-	jz4740_timer_set_period(pwm->hwpwm, period);
+	/* Reset counter to 0 */
+	regmap_write(jz4740->map, TCU_REG_TCNTc(pwm->hwpwm), 0);
+
+	/* Set duty */
+	regmap_write(jz4740->map, TCU_REG_TDHRc(pwm->hwpwm), duty);
 
-	ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
-	ctrl |= JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
+	/* Set period */
+	regmap_write(jz4740->map, TCU_REG_TDFRc(pwm->hwpwm), period);
 
+	/* Set abrupt shutdown */
+	regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+			   TCU_TCSR_PWM_SD, TCU_TCSR_PWM_SD);
+
+	/* Set polarity */
 	switch (state->polarity) {
 	case PWM_POLARITY_NORMAL:
-		ctrl &= ~JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
+		regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+				   TCU_TCSR_PWM_INITL_HIGH, 0);
 		break;
 	case PWM_POLARITY_INVERSED:
-		ctrl |= JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
+		regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+				   TCU_TCSR_PWM_INITL_HIGH,
+				   TCU_TCSR_PWM_INITL_HIGH);
 		break;
 	}
 
-	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
-
 	if (state->enabled)
 		jz4740_pwm_enable(chip, pwm);
 
@@ -176,12 +189,19 @@  static const struct pwm_ops jz4740_pwm_ops = {
 static int jz4740_pwm_probe(struct platform_device *pdev)
 {
 	struct jz4740_pwm_chip *jz4740;
+	struct device *dev = &pdev->dev;
 
-	jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL);
+	jz4740 = devm_kzalloc(dev, sizeof(*jz4740), GFP_KERNEL);
 	if (!jz4740)
 		return -ENOMEM;
 
-	jz4740->chip.dev = &pdev->dev;
+	jz4740->map = device_node_to_regmap(dev->parent->of_node);
+	if (!jz4740->map) {
+		dev_err(dev, "regmap not found\n");
+		return -EINVAL;
+	}
+
+	jz4740->chip.dev = dev;
 	jz4740->chip.ops = &jz4740_pwm_ops;
 	jz4740->chip.npwm = NUM_PWM;
 	jz4740->chip.base = -1;