[v2,3/4] dt-bindings: mfd: da9062: describe buck modes
diff mbox series

Message ID 1573652416-9848-4-git-send-email-chf.fritz@googlemail.com
State Not Applicable
Headers show
Series
  • regulator da9062: support setting buck modes
Related show

Checks

Context Check Description
robh/checkpatch success

Commit Message

Christoph Fritz Nov. 13, 2019, 1:40 p.m. UTC
This patch adds DT description of da9062 buck regulator modes.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
---
 Documentation/devicetree/bindings/mfd/da9062.txt | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Adam Thomson Nov. 13, 2019, 4:26 p.m. UTC | #1
On 13 November 2019 13:40, Christoph Fritz wrote:

> This patch adds DT description of da9062 buck regulator modes.
> 
> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>

Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>

> ---
>  Documentation/devicetree/bindings/mfd/da9062.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt
> b/Documentation/devicetree/bindings/mfd/da9062.txt
> index edca653..bc4b59d 100644
> --- a/Documentation/devicetree/bindings/mfd/da9062.txt
> +++ b/Documentation/devicetree/bindings/mfd/da9062.txt
> @@ -66,6 +66,9 @@ Sub-nodes:
>    details of individual regulator device can be found in:
>    Documentation/devicetree/bindings/regulator/regulator.txt
> 
> +  regulator-initial-mode may be specified for buck regulators using mode values
> +  from include/dt-bindings/regulator/dlg,da9063-regulator.h.
> +
>  - rtc : This node defines settings required for the Real-Time Clock associated
>    with the DA9062. There are currently no entries in this binding, however
>    compatible = "dlg,da9062-rtc" should be added if a node is created.
> @@ -96,6 +99,7 @@ Example:
>  				regulator-max-microvolt = <1570000>;
>  				regulator-min-microamp = <500000>;
>  				regulator-max-microamp = <2000000>;
> +				regulator-initial-mode =
> <DA9063_BUCK_MODE_SYNC>;
>  				regulator-boot-on;
>  			};
>  			DA9062_LDO1: ldo1 {
> --
> 2.1.4

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index edca653..bc4b59d 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -66,6 +66,9 @@  Sub-nodes:
   details of individual regulator device can be found in:
   Documentation/devicetree/bindings/regulator/regulator.txt
 
+  regulator-initial-mode may be specified for buck regulators using mode values
+  from include/dt-bindings/regulator/dlg,da9063-regulator.h.
+
 - rtc : This node defines settings required for the Real-Time Clock associated
   with the DA9062. There are currently no entries in this binding, however
   compatible = "dlg,da9062-rtc" should be added if a node is created.
@@ -96,6 +99,7 @@  Example:
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp = <500000>;
 				regulator-max-microamp = <2000000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-boot-on;
 			};
 			DA9062_LDO1: ldo1 {