[2/3] dt-binding: iio: Add documentation for ADM1177
diff mbox series

Message ID 20191112153552.27431-2-beniamin.bia@analog.com
State Changes Requested
Headers show
Series
  • Untitled series #142368
Related show

Checks

Context Check Description
robh/dt-meta-schema success
robh/checkpatch success

Commit Message

Beniamin Bia Nov. 12, 2019, 3:35 p.m. UTC
Documentation for ADM1177 was added.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
---
 .../bindings/iio/adc/adi,adm1177.yaml         | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml

Comments

Rob Herring Nov. 18, 2019, 5:49 p.m. UTC | #1
On Tue, Nov 12, 2019 at 05:35:51PM +0200, Beniamin Bia wrote:
> Documentation for ADM1177 was added.
> 
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
> ---
>  .../bindings/iio/adc/adi,adm1177.yaml         | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml b/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml
> new file mode 100644
> index 000000000000..69a0230e59f5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,adm1177.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
> +
> +maintainers:
> +  - Michael Hennerich <michael.hennerich@analog.com>
> +  - Beniamin Bia <beniamin.bia@analog.com>
> +
> +description: |
> +  Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,adm1177
> +
> +  reg:
> +    maxItems: 1
> +
> +  avcc-supply:
> +    description:
> +      Phandle to the Avcc power supply
> +
> +  adi,r-sense-micro-ohms:
> +    description:
> +      The value of curent sense resistor in microohms.

s/curent/current/

Is there a range of values allowed?

> +
> +  adi,shutdown-threshold-microamp:
> +    description:
> +      Specifies the current level at which an over current alert occurs.
> +    maximum: 255
> +
> +  adi,vrange-high-enable:
> +    description:
> +      Specifies which internal voltage divider to be used. A 1 selects
> +      a 7:2 voltage divider while a 0 selects a 14:1 voltage divider.
> +    type: boolean
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        adc@b4 {
> +                compatible = "adi,adm1177";
> +                reg = <0xb4>;
> +        };
> +    };
> +...
> -- 
> 2.17.1
>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml b/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml
new file mode 100644
index 000000000000..69a0230e59f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml
@@ -0,0 +1,60 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,adm1177.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Beniamin Bia <beniamin.bia@analog.com>
+
+description: |
+  Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1177
+
+  reg:
+    maxItems: 1
+
+  avcc-supply:
+    description:
+      Phandle to the Avcc power supply
+
+  adi,r-sense-micro-ohms:
+    description:
+      The value of curent sense resistor in microohms.
+
+  adi,shutdown-threshold-microamp:
+    description:
+      Specifies the current level at which an over current alert occurs.
+    maximum: 255
+
+  adi,vrange-high-enable:
+    description:
+      Specifies which internal voltage divider to be used. A 1 selects
+      a 7:2 voltage divider while a 0 selects a 14:1 voltage divider.
+    type: boolean
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@b4 {
+                compatible = "adi,adm1177";
+                reg = <0xb4>;
+        };
+    };
+...