[3/4] libgo/test: Fix compilation for build sysroot
diff mbox series

Message ID alpine.LFD.2.21.1911090243040.13542@redsun52.ssa.fujisawa.hgst.com
State Accepted
Headers show
Series
  • Fix library testsuite compilation for build sysroot
Related show

Commit Message

Maciej W. Rozycki Nov. 11, 2019, 6:12 p.m. UTC
Fix a problem with the libgo testsuite using a method to determine the 
compiler to use resulting in the tool being different from one the 
library has been built with, and causing a catastrophic failure from the 
lack of a suitable `--sysroot=' option where the `--with-build-sysroot=' 
configuration option has been used to build the compiler resulting in 
the inability to link executables.

Address this problem by providing a DejaGNU configuration file defining 
the compiler to use, via the GOC_UNDER_TEST TCL variable, set from $GOC 
by autoconf, which will have all the required options set for the target 
compiler to build executables in the environment configured, removing 
failures like:

.../bin/riscv64-linux-gnu-ld: cannot find crt1.o: No such file or directory
.../bin/riscv64-linux-gnu-ld: cannot find -lm
.../bin/riscv64-linux-gnu-ld: cannot find -lc
collect2: error: ld returned 1 exit status
compiler exited with status 1

No summary comparison, because the libgo testsuite does not provide one 
in this configuration for some reason, however this change improves 
overall test results for the `riscv64-linux-gnu' target (here with the 
`x86_64-linux-gnu' host and RISC-V QEMU in the Linux user emulation mode 
as the target board) from 0 PASSes and 159 FAILs to 133 PASSes and 26 
FAILs.

	libgo/
	* configure.ac: Add testsuite/libgo-test-support.exp to output 
	files.
	* configure: Regenerate.
	* testsuite/libgo-test-support.exp.in: New file.
	* testsuite/Makefile.am (EXTRA_DEJAGNU_SITE_CONFIG): New 
	variable.
	* testsuite/Makefile.in: Regenerate.
	* testsuite/lib/libgo.exp: Don't override GOC_UNDER_TEST 
	previously set.
---
 libgo/configure                           |    3 ++-
 libgo/configure.ac                        |    2 +-
 libgo/testsuite/Makefile.am               |    2 ++
 libgo/testsuite/Makefile.in               |    5 ++++-
 libgo/testsuite/lib/libgo.exp             |   13 ++++++++-----
 libgo/testsuite/libgo-test-support.exp.in |    1 +
 6 files changed, 18 insertions(+), 8 deletions(-)

gcc-test-libgo-gcc-under-test.diff

Comments

Ian Lance Taylor Nov. 11, 2019, 11:29 p.m. UTC | #1
On Mon, Nov 11, 2019 at 10:12 AM Maciej W. Rozycki <macro@wdc.com> wrote:
>
> Fix a problem with the libgo testsuite using a method to determine the
> compiler to use resulting in the tool being different from one the
> library has been built with, and causing a catastrophic failure from the
> lack of a suitable `--sysroot=' option where the `--with-build-sysroot='
> configuration option has been used to build the compiler resulting in
> the inability to link executables.
>
> Address this problem by providing a DejaGNU configuration file defining
> the compiler to use, via the GOC_UNDER_TEST TCL variable, set from $GOC
> by autoconf, which will have all the required options set for the target
> compiler to build executables in the environment configured, removing
> failures like:
>
> .../bin/riscv64-linux-gnu-ld: cannot find crt1.o: No such file or directory
> .../bin/riscv64-linux-gnu-ld: cannot find -lm
> .../bin/riscv64-linux-gnu-ld: cannot find -lc
> collect2: error: ld returned 1 exit status
> compiler exited with status 1
>
> No summary comparison, because the libgo testsuite does not provide one
> in this configuration for some reason, however this change improves
> overall test results for the `riscv64-linux-gnu' target (here with the
> `x86_64-linux-gnu' host and RISC-V QEMU in the Linux user emulation mode
> as the target board) from 0 PASSes and 159 FAILs to 133 PASSes and 26
> FAILs.
>
>         libgo/
>         * configure.ac: Add testsuite/libgo-test-support.exp to output
>         files.
>         * configure: Regenerate.
>         * testsuite/libgo-test-support.exp.in: New file.
>         * testsuite/Makefile.am (EXTRA_DEJAGNU_SITE_CONFIG): New
>         variable.
>         * testsuite/Makefile.in: Regenerate.
>         * testsuite/lib/libgo.exp: Don't override GOC_UNDER_TEST
>         previously set.

Thanks.

Committed to mainline.

Ian

Patch
diff mbox series

Index: gcc/libgo/configure
===================================================================
--- gcc.orig/libgo/configure
+++ gcc/libgo/configure
@@ -15850,7 +15850,7 @@  else
   multilib_arg=
 fi
 
-ac_config_files="$ac_config_files Makefile testsuite/Makefile"
+ac_config_files="$ac_config_files Makefile testsuite/Makefile testsuite/libgo-test-support.exp"
 
 
 ac_config_commands="$ac_config_commands default"
@@ -17031,6 +17031,7 @@  do
     "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
     "testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;;
+    "testsuite/libgo-test-support.exp") CONFIG_FILES="$CONFIG_FILES testsuite/libgo-test-support.exp" ;;
     "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
 
   *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
Index: gcc/libgo/configure.ac
===================================================================
--- gcc.orig/libgo/configure.ac
+++ gcc/libgo/configure.ac
@@ -877,7 +877,7 @@  else
   multilib_arg=
 fi
 
-AC_CONFIG_FILES(Makefile testsuite/Makefile)
+AC_CONFIG_FILES(Makefile testsuite/Makefile testsuite/libgo-test-support.exp)
 
 AC_CONFIG_COMMANDS([default],
 [if test -n "$CONFIG_FILES"; then
Index: gcc/libgo/testsuite/Makefile.am
===================================================================
--- gcc.orig/libgo/testsuite/Makefile.am
+++ gcc/libgo/testsuite/Makefile.am
@@ -11,6 +11,8 @@  RUNTEST = `if [ -f $(top_srcdir)/../deja
 	       echo $(top_srcdir)/../dejagnu/runtest ; \
 	    else echo runtest; fi`
 
+EXTRA_DEJAGNU_SITE_CONFIG = libgo-test-support.exp
+
 # When running the tests we set GCC_EXEC_PREFIX to the install tree so that
 # files that have already been installed there will be found.  The -B option
 # overrides it, so use of GCC_EXEC_PREFIX will not result in using GCC files
Index: gcc/libgo/testsuite/Makefile.in
===================================================================
--- gcc.orig/libgo/testsuite/Makefile.in
+++ gcc/libgo/testsuite/Makefile.in
@@ -106,7 +106,7 @@  am__configure_deps = $(am__aclocal_m4_de
 DIST_COMMON = $(srcdir)/Makefile.am
 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
 CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_FILES = libgo-test-support.exp
 CONFIG_CLEAN_VPATH_FILES =
 AM_V_P = $(am__v_P_@AM_V@)
 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
@@ -299,6 +299,7 @@  RUNTEST = `if [ -f $(top_srcdir)/../deja
 	       echo $(top_srcdir)/../dejagnu/runtest ; \
 	    else echo runtest; fi`
 
+EXTRA_DEJAGNU_SITE_CONFIG = libgo-test-support.exp
 
 # When running the tests we set GCC_EXEC_PREFIX to the install tree so that
 # files that have already been installed there will be found.  The -B option
@@ -338,6 +339,8 @@  $(top_srcdir)/configure: @MAINTAINER_MOD
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
+libgo-test-support.exp: $(top_builddir)/config.status $(srcdir)/libgo-test-support.exp.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 
 mostlyclean-libtool:
 	-rm -f *.lo
Index: gcc/libgo/testsuite/lib/libgo.exp
===================================================================
--- gcc.orig/libgo/testsuite/lib/libgo.exp
+++ gcc/libgo/testsuite/lib/libgo.exp
@@ -14,13 +14,16 @@ 
 # along with GCC; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.
 
-set gccdir [lookfor_file $tool_root_dir gcc/libgcc.a]
-if {$gccdir != ""} {
-    set gccdir [file dirname $gccdir]
-}
-set GOC_UNDER_TEST "$gccdir/gccgo -B$gccdir/"
 set TESTING_IN_BUILD_TREE 1
 
+if ![info exists GOC_UNDER_TEST] then {
+    set gccdir [lookfor_file $tool_root_dir gcc/libgcc.a]
+    if {$gccdir != ""} {
+	set gccdir [file dirname $gccdir]
+    }
+    set GOC_UNDER_TEST "$gccdir/gccgo -B$gccdir/"
+}
+
 if [info exists GOTEST_TMPDIR] {
     set tmpdir $GOTEST_TMPDIR
 }
Index: gcc/libgo/testsuite/libgo-test-support.exp.in
===================================================================
--- /dev/null
+++ gcc/libgo/testsuite/libgo-test-support.exp.in
@@ -0,0 +1 @@ 
+set GOC_UNDER_TEST {@GOC@}