Message ID | 20191111161431.26293-1-akshu.agrawal@amd.com |
---|---|
State | Accepted |
Headers | show |
Series | i2c: i2c-cros-ec-tunnel: Make the device acpi compatible | expand |
On Mon, Nov 11, 2019 at 9:15 AM Akshu Agrawal <akshu.agrawal@amd.com> wrote: > > Add ACPI entry and use device_property_read to get fw value > which is common to both dtsi and acpi. > > Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> > --- > drivers/i2c/busses/i2c-cros-ec-tunnel.c | 15 ++++++++++----- > 1 file changed, 10 insertions(+), 5 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c > index c551aa96a2e3..958161c71985 100644 > --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c > +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c > @@ -3,6 +3,7 @@ > // > // Copyright (C) 2013 Google, Inc. > > +#include <linux/acpi.h> > #include <linux/module.h> > #include <linux/i2c.h> > #include <linux/platform_data/cros_ec_commands.h> > @@ -240,7 +241,6 @@ static const struct i2c_algorithm ec_i2c_algorithm = { > > static int ec_i2c_probe(struct platform_device *pdev) > { > - struct device_node *np = pdev->dev.of_node; > struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent); > struct device *dev = &pdev->dev; > struct ec_i2c_device *bus = NULL; > @@ -256,7 +256,7 @@ static int ec_i2c_probe(struct platform_device *pdev) > if (bus == NULL) > return -ENOMEM; > > - err = of_property_read_u32(np, "google,remote-bus", &remote_bus); > + err = device_property_read_u32(dev, "google,remote-bus", &remote_bus); > if (err) { > dev_err(dev, "Couldn't read remote-bus property\n"); > return err; > @@ -271,7 +271,7 @@ static int ec_i2c_probe(struct platform_device *pdev) > bus->adap.algo = &ec_i2c_algorithm; > bus->adap.algo_data = bus; > bus->adap.dev.parent = &pdev->dev; > - bus->adap.dev.of_node = np; > + bus->adap.dev.of_node = pdev->dev.of_node; > bus->adap.retries = I2C_MAX_RETRIES; > > err = i2c_add_adapter(&bus->adap); > @@ -291,19 +291,24 @@ static int ec_i2c_remove(struct platform_device *dev) > return 0; > } > > -#ifdef CONFIG_OF > static const struct of_device_id cros_ec_i2c_of_match[] = { > { .compatible = "google,cros-ec-i2c-tunnel" }, > {}, > }; > MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match); > -#endif > + > +static const struct acpi_device_id cros_ec_i2c_tunnel_acpi_id[] = { > + { "GOOG001A", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(acpi, cros_ec_i2c_tunnel_acpi_id); > > static struct platform_driver ec_i2c_tunnel_driver = { > .probe = ec_i2c_probe, > .remove = ec_i2c_remove, > .driver = { > .name = "cros-ec-i2c-tunnel", > + .acpi_match_table = ACPI_PTR(cros_ec_i2c_tunnel_acpi_id), > .of_match_table = of_match_ptr(cros_ec_i2c_of_match), > }, > }; > -- > 2.17.1 > Acked-by: Raul E Rangel <rrangel@chromium.org>
Hi Akshu, Thanks for sending this upstream and improve CrOS EC On 11/11/19 17:14, Akshu Agrawal wrote: > Add ACPI entry and use device_property_read to get fw value > which is common to both dtsi and acpi. > > Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> > --- > drivers/i2c/busses/i2c-cros-ec-tunnel.c | 15 ++++++++++----- > 1 file changed, 10 insertions(+), 5 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c > index c551aa96a2e3..958161c71985 100644 > --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c > +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c > @@ -3,6 +3,7 @@ > // > // Copyright (C) 2013 Google, Inc. > > +#include <linux/acpi.h> > #include <linux/module.h> > #include <linux/i2c.h> > #include <linux/platform_data/cros_ec_commands.h> > @@ -240,7 +241,6 @@ static const struct i2c_algorithm ec_i2c_algorithm = { > > static int ec_i2c_probe(struct platform_device *pdev) > { > - struct device_node *np = pdev->dev.of_node; > struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent); > struct device *dev = &pdev->dev; > struct ec_i2c_device *bus = NULL; > @@ -256,7 +256,7 @@ static int ec_i2c_probe(struct platform_device *pdev) > if (bus == NULL) > return -ENOMEM; > > - err = of_property_read_u32(np, "google,remote-bus", &remote_bus); > + err = device_property_read_u32(dev, "google,remote-bus", &remote_bus); > if (err) { > dev_err(dev, "Couldn't read remote-bus property\n"); > return err; > @@ -271,7 +271,7 @@ static int ec_i2c_probe(struct platform_device *pdev) > bus->adap.algo = &ec_i2c_algorithm; > bus->adap.algo_data = bus; > bus->adap.dev.parent = &pdev->dev; > - bus->adap.dev.of_node = np; > + bus->adap.dev.of_node = pdev->dev.of_node; That change is not really needed/(related) but as np was only used here I'm fine with it. > bus->adap.retries = I2C_MAX_RETRIES; > > err = i2c_add_adapter(&bus->adap); > @@ -291,19 +291,24 @@ static int ec_i2c_remove(struct platform_device *dev) > return 0; > } > > -#ifdef CONFIG_OF > static const struct of_device_id cros_ec_i2c_of_match[] = { > { .compatible = "google,cros-ec-i2c-tunnel" }, > {}, > }; > MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match); > -#endif > + > +static const struct acpi_device_id cros_ec_i2c_tunnel_acpi_id[] = { > + { "GOOG001A", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(acpi, cros_ec_i2c_tunnel_acpi_id); > > static struct platform_driver ec_i2c_tunnel_driver = { > .probe = ec_i2c_probe, > .remove = ec_i2c_remove, > .driver = { > .name = "cros-ec-i2c-tunnel", > + .acpi_match_table = ACPI_PTR(cros_ec_i2c_tunnel_acpi_id), > .of_match_table = of_match_ptr(cros_ec_i2c_of_match), > }, > }; > Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Question: Is this supported on older firmwares or is only expected to work on newer ACPI-based devices? Thanks, Enric
On Mon, Nov 11, 2019 at 09:44:28PM +0530, Akshu Agrawal wrote: > Add ACPI entry and use device_property_read to get fw value > which is common to both dtsi and acpi. > > Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Applied to for-next, thanks!
> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > > Question: Is this supported on older firmwares or is only expected to work on > newer ACPI-based devices? This is for new devices and we are yet to push Coreboot patch populating the entry. Thanks, Akshu
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c index c551aa96a2e3..958161c71985 100644 --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c @@ -3,6 +3,7 @@ // // Copyright (C) 2013 Google, Inc. +#include <linux/acpi.h> #include <linux/module.h> #include <linux/i2c.h> #include <linux/platform_data/cros_ec_commands.h> @@ -240,7 +241,6 @@ static const struct i2c_algorithm ec_i2c_algorithm = { static int ec_i2c_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent); struct device *dev = &pdev->dev; struct ec_i2c_device *bus = NULL; @@ -256,7 +256,7 @@ static int ec_i2c_probe(struct platform_device *pdev) if (bus == NULL) return -ENOMEM; - err = of_property_read_u32(np, "google,remote-bus", &remote_bus); + err = device_property_read_u32(dev, "google,remote-bus", &remote_bus); if (err) { dev_err(dev, "Couldn't read remote-bus property\n"); return err; @@ -271,7 +271,7 @@ static int ec_i2c_probe(struct platform_device *pdev) bus->adap.algo = &ec_i2c_algorithm; bus->adap.algo_data = bus; bus->adap.dev.parent = &pdev->dev; - bus->adap.dev.of_node = np; + bus->adap.dev.of_node = pdev->dev.of_node; bus->adap.retries = I2C_MAX_RETRIES; err = i2c_add_adapter(&bus->adap); @@ -291,19 +291,24 @@ static int ec_i2c_remove(struct platform_device *dev) return 0; } -#ifdef CONFIG_OF static const struct of_device_id cros_ec_i2c_of_match[] = { { .compatible = "google,cros-ec-i2c-tunnel" }, {}, }; MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match); -#endif + +static const struct acpi_device_id cros_ec_i2c_tunnel_acpi_id[] = { + { "GOOG001A", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, cros_ec_i2c_tunnel_acpi_id); static struct platform_driver ec_i2c_tunnel_driver = { .probe = ec_i2c_probe, .remove = ec_i2c_remove, .driver = { .name = "cros-ec-i2c-tunnel", + .acpi_match_table = ACPI_PTR(cros_ec_i2c_tunnel_acpi_id), .of_match_table = of_match_ptr(cros_ec_i2c_of_match), }, };
Add ACPI entry and use device_property_read to get fw value which is common to both dtsi and acpi. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> --- drivers/i2c/busses/i2c-cros-ec-tunnel.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)