From patchwork Mon Nov 11 13:53:23 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Peter Ujfalusi X-Patchwork-Id: 1192938 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.b="SoIm6noN"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 47BXQG4zNgz9sRH for ; Tue, 12 Nov 2019 00:53:10 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727295AbfKKNxF (ORCPT ); Mon, 11 Nov 2019 08:53:05 -0500 Received: from fllv0016.ext.ti.com ([198.47.19.142]:54262 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727237AbfKKNxD (ORCPT ); Mon, 11 Nov 2019 08:53:03 -0500 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id xABDqmhb059710; Mon, 11 Nov 2019 07:52:48 -0600 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1573480368; bh=g+Bs8AcPiZkKkiuy1LdtDXfdFl5qi/DFw6rzLivui2Y=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=SoIm6noNi9HhBa/aVBdFqh9kTSzbDPwQiUIEYptKmF2LocpiEHM0RQ+7fwTx+jtIh 7oPrMkmseUDFhvm1XR1x4vOeJbES4+oEohgH8BoMRq3XRwlabkICzns8SLC1v0M8GQ D4xK2R1ayxq6a0/8KKNn0NqApaBk7VetviaBsuEo= Received: from DFLE102.ent.ti.com (dfle102.ent.ti.com [10.64.6.23]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id xABDqmVV111569 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Mon, 11 Nov 2019 07:52:48 -0600 Received: from DFLE107.ent.ti.com (10.64.6.28) by DFLE102.ent.ti.com (10.64.6.23) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1847.3; Mon, 11 Nov 2019 07:52:31 -0600 Received: from fllv0040.itg.ti.com (10.64.41.20) by DFLE107.ent.ti.com (10.64.6.28) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1847.3 via Frontend Transport; Mon, 11 Nov 2019 07:52:31 -0600 Received: from feketebors.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0040.itg.ti.com (8.15.2/8.15.2) with ESMTP id xABDqE8t097668; Mon, 11 Nov 2019 07:52:44 -0600 From: Peter Ujfalusi To: , , , CC: , , , , , , , , , Subject: [PATCH v5 08/15] dt-bindings: dma: ti: Add document for K3 UDMA Date: Mon, 11 Nov 2019 15:53:23 +0200 Message-ID: <20191111135330.8235-9-peter.ujfalusi@ti.com> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191111135330.8235-1-peter.ujfalusi@ti.com> References: <20191111135330.8235-1-peter.ujfalusi@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org New binding document for Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P). UDMA-P is introduced as part of the K3 architecture and can be found in AM654 and j721e. Signed-off-by: Peter Ujfalusi Reviewed-by: Rob Herring --- .../devicetree/bindings/dma/ti/k3-udma.yaml | 192 ++++++++++++++++++ 1 file changed, 192 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.yaml diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml new file mode 100644 index 000000000000..5a60c3fc6f5c --- /dev/null +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -0,0 +1,192 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings + +maintainers: + - Peter Ujfalusi + +description: | + The UDMA-P is intended to perform similar (but significantly upgraded) + functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P + module supports the transmission and reception of various packet types. + The UDMA-P is architected to facilitate the segmentation and reassembly of + SoC DMA data structure compliant packets to/from smaller data blocks that are + natively compatible with the specific requirements of each connected + peripheral. + Multiple Tx and Rx channels are provided within the DMA which allow multiple + segmentation or reassembly operations to be ongoing. The DMA controller + maintains state information for each of the channels which allows packet + segmentation and reassembly operations to be time division multiplexed between + channels in order to share the underlying DMA hardware. An external DMA + scheduler is used to control the ordering and rate at which this multiplexing + occurs for Transmit operations. The ordering and rate of Receive operations + is indirectly controlled by the order in which blocks are pushed into the DMA + on the Rx PSI-L interface. + + The UDMA-P also supports acting as both a UTC and UDMA-C for its internal + channels. Channels in the UDMA-P can be configured to be either Packet-Based + or Third-Party channels on a channel by channel basis. + + All transfers within NAVSS is done between PSI-L source and destination + threads. + The peripherals serviced by UDMA can be PSI-L native (sa2ul, cpsw, etc) or + legacy, non PSI-L native peripherals. In the later case a special, small PDMA + is tasked to act as a bridge between the PSI-L fabric and the legacy + peripheral. + + PDMAs can be configured via UDMAP peer registers to match with the + configuration of the legacy peripheral. + +allOf: + - $ref: "../dma-controller.yaml#" + +properties: + "#dma-cells": + const: 1 + description: | + The cell is the PSI-L thread ID of the remote (to UDMAP) end. + Valid ranges for thread ID depends on the data movement direction: + for source thread IDs (rx): 0 - 0x7fff + for destination thread IDs (tx): 0x8000 - 0xffff + + PLease refer to the device documentation for the PSI-L thread map and also + the PSI-L peripheral chapter for the correct thread ID. + + compatible: + oneOf: + - description: for AM654 + items: + - enum: + - ti,am654-navss-main-udmap + - ti,am654-navss-mcu-udmap + + - description: for J721E + items: + - enum: + - ti,j721e-navss-main-udmap + - ti,j721e-navss-mcu-udmap + + reg: + maxItems: 3 + + reg-names: + items: + - const: gcfg + - const: rchanrt + - const: tchanrt + + msi-parent: true + + ti,sci: + description: phandle to TI-SCI compatible System controller node + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + + ti,sci-dev-id: + description: TI-SCI device id of UDMAP + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + ti,ringacc: + description: phandle to the ring accelerator node + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + + ti,sci-rm-range-tchan: + description: | + Array of UDMA tchan resource subtypes for resource allocation for this + host + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + # Should be enough + maxItems: 255 + + ti,sci-rm-range-rchan: + description: | + Array of UDMA rchan resource subtypes for resource allocation for this + host + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + # Should be enough + maxItems: 255 + + ti,sci-rm-range-rflow: + description: | + Array of UDMA rflow resource subtypes for resource allocation for this + host + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + # Should be enough + maxItems: 255 + +required: + - compatible + - "#dma-cells" + - reg + - reg-names + - msi-parent + - ti,sci + - ti,sci-dev-id + - ti,ringacc + - ti,sci-rm-range-tchan + - ti,sci-rm-range-rchan + - ti,sci-rm-range-rflow + +examples: + - |+ + cbass_main { + #address-cells = <2>; + #size-cells = <2>; + + cbass_main_navss: navss@30800000 { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + dma-coherent; + dma-ranges; + ranges = <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>; + + ti,sci-dev-id = <118>; + + main_udmap: dma-controller@31150000 { + compatible = "ti,am654-navss-main-udmap"; + reg = <0x0 0x31150000 0x0 0x100>, + <0x0 0x34000000 0x0 0x100000>, + <0x0 0x35000000 0x0 0x100000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + #dma-cells = <1>; + + ti,ringacc = <&ringacc>; + + msi-parent = <&inta_main_udmass>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <188>; + + ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */ + <0x2>; /* TX_CHAN */ + ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */ + <0x5>; /* RX_CHAN */ + ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */ + }; + }; + + mcasp0: mcasp@02B00000 { + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + }; + + crypto: crypto@4E00000 { + compatible = "ti,sa2ul-crypto"; + + dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>; + dma-names = "tx", "rx1", "rx2"; + }; + };