[1/2] mtd: mtk-quadspi: add support for DMA reading
diff mbox series

Message ID 20191110052104.5502-1-gch981213@gmail.com
State New
Headers show
Series
  • [1/2] mtd: mtk-quadspi: add support for DMA reading
Related show

Commit Message

Chuanhong Guo Nov. 10, 2019, 5:21 a.m. UTC
PIO reading mode on this controller is pretty inefficient
(one cmd+addr+dummy sequence reads only one byte)
This patch adds support for reading using DMA mode which increases
reading speed from 1MB/s to 4MB/s

DMA busy checking is implemented with readl_poll_timeout because
I don't have access to IRQ-related docs. The speed increment comes
from those saved cmd+addr+dummy clocks.

This controller requires that DMA source/destination address and
reading length should be 16-byte aligned. We use a bounce buffer if
one of them is not aligned, read more than what we need, and copy
data from corresponding buffer offset.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
---

 drivers/mtd/spi-nor/mtk-quadspi.c | 99 +++++++++++++++++++++++++++++--
 1 file changed, 95 insertions(+), 4 deletions(-)

Comments

Chuanhong Guo Nov. 14, 2019, 8:19 a.m. UTC | #1
Hi all!

On Tue, Nov 12, 2019 at 3:29 PM kbuild test robot <lkp@intel.com> wrote:
> [...]
> All warnings (new ones prefixed by >>):
>
>    drivers/mtd/spi-nor/mtk-quadspi.c: In function 'mtk_nor_read_dma_bounce':
> >> drivers/mtd/spi-nor/mtk-quadspi.c:349:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
>      mem_unaligned_len = (u32)buf % MTK_NOR_DMA_ALIGN;
>                          ^
>    drivers/mtd/spi-nor/mtk-quadspi.c: In function 'mtk_nor_read':
>    drivers/mtd/spi-nor/mtk-quadspi.c:369:6: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
>          (u32)buffer % MTK_NOR_DMA_ALIGN || from % MTK_NOR_DMA_ALIGN)
>          ^
>

DMA mode on this controller requires that source address, destination
address and reading
length should all be 16-byte aligned. And because of this, I didn't
use the bounce buffer
provided by spi-nor framework and allocate its own one.
Should I just cast all these pointers to ulong or are there better
ways to check for address
alignments and/or obtain an aligned buffer?

Regards,
Chuanhong Guo

Patch
diff mbox series

diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c
index b1691680d174..ac0e531ce80c 100644
--- a/drivers/mtd/spi-nor/mtk-quadspi.c
+++ b/drivers/mtd/spi-nor/mtk-quadspi.c
@@ -7,6 +7,7 @@ 
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
@@ -17,6 +18,7 @@ 
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/sched/task_stack.h>
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -70,6 +72,10 @@ 
 #define MTK_NOR_DELSEL2_REG		0xd0
 #define MTK_NOR_DELSEL3_REG		0xd4
 #define MTK_NOR_DELSEL4_REG		0xd8
+#define MTK_NOR_FDMA_CTL_REG		0x718
+#define MTK_NOR_FDMA_FADR_REG		0x71c
+#define MTK_NOR_FDMA_DADR_REG		0x720
+#define MTK_NOR_FDMA_END_DADR_REG	0x724
 
 /* commands for mtk nor controller */
 #define MTK_NOR_READ_CMD		0x0
@@ -88,6 +94,7 @@ 
 #define MTK_NOR_DUAL_READ_EN		0x1
 #define MTK_NOR_DUAL_DISABLE		0x0
 #define MTK_NOR_FAST_READ		0x1
+#define MTK_NOR_DMA_TRIG		0x1
 
 #define SFLASH_WRBUF_SIZE		128
 
@@ -97,7 +104,10 @@ 
 #define MTK_NOR_MAX_SHIFT		7
 /* nor controller 4-byte address mode enable bit */
 #define MTK_NOR_4B_ADDR_EN		BIT(4)
-
+/* DMA address has to be 16-byte aligned */
+#define MTK_NOR_DMA_ALIGN		16
+/* Limit bounce buffer size to 32KB */
+#define MTK_NOR_MAX_BBUF_READ		(32 * 1024)
 /* Helpers for accessing the program data / shift data registers */
 #define MTK_NOR_PRG_REG(n)		(MTK_NOR_PRGDATA0_REG + 4 * (n))
 #define MTK_NOR_SHREG(n)		(MTK_NOR_SHREG0_REG + 4 * (n))
@@ -260,13 +270,12 @@  static void mtk_nor_set_addr(struct mtk_nor *mtk_nor, u32 addr)
 	writeb(addr & 0xff, mtk_nor->base + MTK_NOR_RADR3_REG);
 }
 
-static ssize_t mtk_nor_read(struct spi_nor *nor, loff_t from, size_t length,
-			    u_char *buffer)
+static ssize_t mtk_nor_read_pio(struct mtk_nor *mtk_nor, loff_t from,
+				size_t length, u_char *buffer)
 {
 	int i, ret;
 	int addr = (int)from;
 	u8 *buf = (u8 *)buffer;
-	struct mtk_nor *mtk_nor = nor->priv;
 
 	/* set mode for fast read mode ,dual mode or quad mode */
 	mtk_nor_set_read_mode(mtk_nor);
@@ -281,6 +290,88 @@  static ssize_t mtk_nor_read(struct spi_nor *nor, loff_t from, size_t length,
 	return length;
 }
 
+static int mtk_nor_dma_exec(struct mtk_nor *mtk_nor)
+{
+	int reg;
+
+	reg = readl(mtk_nor->base + MTK_NOR_FDMA_CTL_REG);
+	writel(reg | MTK_NOR_DMA_TRIG, mtk_nor->base + MTK_NOR_FDMA_CTL_REG);
+	return readl_poll_timeout(mtk_nor->base + MTK_NOR_FDMA_CTL_REG, reg,
+				  !(reg & MTK_NOR_DMA_TRIG), 20, 10000);
+}
+
+static ssize_t mtk_nor_read_dma(struct mtk_nor *mtk_nor, loff_t from,
+				size_t length, u_char *buffer)
+{
+	ssize_t ret;
+	ssize_t read_length = length & ~(MTK_NOR_DMA_ALIGN - 1);
+	dma_addr_t dma_addr;
+
+	mtk_nor_set_read_mode(mtk_nor);
+	mtk_nor_set_addr_width(mtk_nor);
+
+	dma_addr = dma_map_single(mtk_nor->dev, buffer, read_length,
+				  DMA_FROM_DEVICE);
+	if (dma_mapping_error(mtk_nor->dev, dma_addr)) {
+		dev_err(mtk_nor->dev, "failed to map dma buffer.");
+		return -EINVAL;
+	}
+
+	writel(from, mtk_nor->base + MTK_NOR_FDMA_FADR_REG);
+	writel(dma_addr, mtk_nor->base + MTK_NOR_FDMA_DADR_REG);
+	writel((u32)dma_addr + read_length,
+	       mtk_nor->base + MTK_NOR_FDMA_END_DADR_REG);
+	ret = mtk_nor_dma_exec(mtk_nor);
+	dma_unmap_single(mtk_nor->dev, dma_addr, read_length, DMA_FROM_DEVICE);
+	if (!ret)
+		ret = read_length;
+	return ret;
+}
+
+static ssize_t mtk_nor_read_dma_bounce(struct mtk_nor *mtk_nor, loff_t from,
+				       size_t length, u_char *buffer)
+{
+	ssize_t nor_unaligned_len = from % MTK_NOR_DMA_ALIGN;
+	loff_t read_from = from & ~(MTK_NOR_DMA_ALIGN - 1);
+	ssize_t read_len;
+	u_char *buf;
+	u_char *bouncebuf;
+	size_t mem_unaligned_len;
+
+	if (length > MTK_NOR_MAX_BBUF_READ)
+		length = MTK_NOR_MAX_BBUF_READ;
+	read_len = length + nor_unaligned_len + MTK_NOR_DMA_ALIGN;
+
+	buf = kmalloc(read_len + MTK_NOR_DMA_ALIGN, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	mem_unaligned_len = (u32)buf % MTK_NOR_DMA_ALIGN;
+	bouncebuf = (buf + MTK_NOR_DMA_ALIGN) - mem_unaligned_len;
+
+	read_len = mtk_nor_read_dma(mtk_nor, read_from, read_len, bouncebuf);
+	if (read_len > 0)
+		memcpy(buffer, bouncebuf + nor_unaligned_len, length);
+
+	kfree(buf);
+	return length;
+}
+
+static ssize_t mtk_nor_read(struct spi_nor *nor, loff_t from, size_t length,
+			    u_char *buffer)
+{
+	struct mtk_nor *mtk_nor = nor->priv;
+
+	if (length < MTK_NOR_DMA_ALIGN)
+		return mtk_nor_read_pio(mtk_nor, from, length, buffer);
+
+	if (object_is_on_stack(buffer) || !virt_addr_valid(buffer) ||
+	    (u32)buffer % MTK_NOR_DMA_ALIGN || from % MTK_NOR_DMA_ALIGN)
+		return mtk_nor_read_dma_bounce(mtk_nor, from, length, buffer);
+
+	return mtk_nor_read_dma(mtk_nor, from, length, buffer);
+}
+
 static int mtk_nor_write_single_byte(struct mtk_nor *mtk_nor,
 				     int addr, int length, u8 *data)
 {