diff --git a/cpus.c b/cpus.c
index 8978779..986c900 100644
--- a/cpus.c
+++ b/cpus.c
@@ -65,6 +65,281 @@
 static CPUState *next_cpu;
 
 /***********************************************************/
+/* guest cycle counter */
+
+/* Conversion factor from emulated instructions to virtual clock ticks.  */
+static int icount_time_shift;
+/* Arbitrarily pick 1MIPS as the minimum allowable speed.  */
+#define MAX_ICOUNT_SHIFT 10
+/* Compensate for varying guest execution speed.  */
+static int64_t qemu_icount_bias;
+static QEMUTimer *icount_rt_timer;
+static QEMUTimer *icount_vm_timer;
+static QEMUTimer *icount_warp_timer;
+static int64_t vm_clock_warp_start;
+static int64_t qemu_icount;
+
+typedef struct TimersState {
+    int64_t cpu_ticks_prev;
+    int64_t cpu_ticks_offset;
+    int64_t cpu_clock_offset;
+    int32_t cpu_ticks_enabled;
+    int64_t dummy;
+} TimersState;
+
+TimersState timers_state;
+
+/* Return the virtual CPU time, based on the instruction counter.  */
+int64_t cpu_get_icount(void)
+{
+    int64_t icount;
+    CPUState *env = cpu_single_env;;
+
+    icount = qemu_icount;
+    if (env) {
+        if (!can_do_io(env)) {
+            fprintf(stderr, "Bad clock read\n");
+        }
+        icount -= (env->icount_decr.u16.low + env->icount_extra);
+    }
+    return qemu_icount_bias + (icount << icount_time_shift);
+}
+
+/* return the host CPU cycle counter and handle stop/restart */
+int64_t cpu_get_ticks(void)
+{
+    if (use_icount) {
+        return cpu_get_icount();
+    }
+    if (!timers_state.cpu_ticks_enabled) {
+        return timers_state.cpu_ticks_offset;
+    } else {
+        int64_t ticks;
+        ticks = cpu_get_real_ticks();
+        if (timers_state.cpu_ticks_prev > ticks) {
+            /* Note: non increasing ticks may happen if the host uses
+               software suspend */
+            timers_state.cpu_ticks_offset += timers_state.cpu_ticks_prev - ticks;
+        }
+        timers_state.cpu_ticks_prev = ticks;
+        return ticks + timers_state.cpu_ticks_offset;
+    }
+}
+
+/* return the host CPU monotonic timer and handle stop/restart */
+int64_t cpu_get_clock(void)
+{
+    int64_t ti;
+    if (!timers_state.cpu_ticks_enabled) {
+        return timers_state.cpu_clock_offset;
+    } else {
+        ti = get_clock();
+        return ti + timers_state.cpu_clock_offset;
+    }
+}
+
+/* enable cpu_get_ticks() */
+void cpu_enable_ticks(void)
+{
+    if (!timers_state.cpu_ticks_enabled) {
+        timers_state.cpu_ticks_offset -= cpu_get_real_ticks();
+        timers_state.cpu_clock_offset -= get_clock();
+        timers_state.cpu_ticks_enabled = 1;
+    }
+}
+
+/* disable cpu_get_ticks() : the clock is stopped. You must not call
+   cpu_get_ticks() after that.  */
+void cpu_disable_ticks(void)
+{
+    if (timers_state.cpu_ticks_enabled) {
+        timers_state.cpu_ticks_offset = cpu_get_ticks();
+        timers_state.cpu_clock_offset = cpu_get_clock();
+        timers_state.cpu_ticks_enabled = 0;
+    }
+}
+
+/* Correlation between real and virtual time is always going to be
+   fairly approximate, so ignore small variation.
+   When the guest is idle real and virtual time will be aligned in
+   the IO wait loop.  */
+#define ICOUNT_WOBBLE (get_ticks_per_sec() / 10)
+
+static void icount_adjust(void)
+{
+    int64_t cur_time;
+    int64_t cur_icount;
+    int64_t delta;
+    static int64_t last_delta;
+    /* If the VM is not running, then do nothing.  */
+    if (!runstate_is_running()) {
+        return;
+    }
+    cur_time = cpu_get_clock();
+    cur_icount = qemu_get_clock_ns(vm_clock);
+    delta = cur_icount - cur_time;
+    /* FIXME: This is a very crude algorithm, somewhat prone to oscillation.  */
+    if (delta > 0
+        && last_delta + ICOUNT_WOBBLE < delta * 2
+        && icount_time_shift > 0) {
+        /* The guest is getting too far ahead.  Slow time down.  */
+        icount_time_shift--;
+    }
+    if (delta < 0
+        && last_delta - ICOUNT_WOBBLE > delta * 2
+        && icount_time_shift < MAX_ICOUNT_SHIFT) {
+        /* The guest is getting too far behind.  Speed time up.  */
+        icount_time_shift++;
+    }
+    last_delta = delta;
+    qemu_icount_bias = cur_icount - (qemu_icount << icount_time_shift);
+}
+
+static void icount_adjust_rt(void *opaque)
+{
+    qemu_mod_timer(icount_rt_timer,
+                   qemu_get_clock_ms(rt_clock) + 1000);
+    icount_adjust();
+}
+
+static void icount_adjust_vm(void *opaque)
+{
+    qemu_mod_timer(icount_vm_timer,
+                   qemu_get_clock_ns(vm_clock) + get_ticks_per_sec() / 10);
+    icount_adjust();
+}
+
+static int64_t qemu_icount_round(int64_t count)
+{
+    return (count + (1 << icount_time_shift) - 1) >> icount_time_shift;
+}
+
+static void icount_warp_rt(void *opaque)
+{
+    if (vm_clock_warp_start == -1) {
+        return;
+    }
+
+    if (runstate_is_running()) {
+        int64_t clock = qemu_get_clock_ns(rt_clock);
+        int64_t warp_delta = clock - vm_clock_warp_start;
+        if (use_icount == 1) {
+            qemu_icount_bias += warp_delta;
+        } else {
+            /*
+             * In adaptive mode, do not let the vm_clock run too
+             * far ahead of real time.
+             */
+            int64_t cur_time = cpu_get_clock();
+            int64_t cur_icount = qemu_get_clock_ns(vm_clock);
+            int64_t delta = cur_time - cur_icount;
+            qemu_icount_bias += MIN(warp_delta, delta);
+        }
+        if (qemu_clock_expired(vm_clock)) {
+            qemu_notify_event();
+        }
+    }
+    vm_clock_warp_start = -1;
+}
+
+void qemu_clock_warp(QEMUClock *clock)
+{
+    int64_t deadline;
+
+    /*
+     * There are too many global variables to make the "warp" behavior
+     * applicable to other clocks.  But a clock argument removes the
+     * need for if statements all over the place.
+     */
+    if (clock != vm_clock || !use_icount) {
+        return;
+    }
+
+    /*
+     * If the CPUs have been sleeping, advance the vm_clock timer now.  This
+     * ensures that the deadline for the timer is computed correctly below.
+     * This also makes sure that the insn counter is synchronized before the
+     * CPU starts running, in case the CPU is woken by an event other than
+     * the earliest vm_clock timer.
+     */
+    icount_warp_rt(NULL);
+    if (!all_cpu_threads_idle() || !qemu_clock_has_timers(vm_clock)) {
+        qemu_del_timer(icount_warp_timer);
+        return;
+    }
+
+    vm_clock_warp_start = qemu_get_clock_ns(rt_clock);
+    deadline = qemu_clock_deadline(vm_clock);
+    if (deadline > 0) {
+        /*
+         * Ensure the vm_clock proceeds even when the virtual CPU goes to
+         * sleep.  Otherwise, the CPU might be waiting for a future timer
+         * interrupt to wake it up, but the interrupt never comes because
+         * the vCPU isn't running any insns and thus doesn't advance the
+         * vm_clock.
+         *
+         * An extreme solution for this problem would be to never let VCPUs
+         * sleep in icount mode if there is a pending vm_clock timer; rather
+         * time could just advance to the next vm_clock event.  Instead, we
+         * do stop VCPUs and only advance vm_clock after some "real" time,
+         * (related to the time left until the next event) has passed.  This
+         * rt_clock timer will do this.  This avoids that the warps are too
+         * visible externally---for example, you will not be sending network
+         * packets continously instead of every 100ms.
+         */
+        qemu_mod_timer(icount_warp_timer, vm_clock_warp_start + deadline);
+    } else {
+        qemu_notify_event();
+    }
+}
+
+static const VMStateDescription vmstate_timers = {
+    .name = "timer",
+    .version_id = 2,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields      = (VMStateField[]) {
+        VMSTATE_INT64(cpu_ticks_offset, TimersState),
+        VMSTATE_INT64(dummy, TimersState),
+        VMSTATE_INT64_V(cpu_clock_offset, TimersState, 2),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+void configure_icount(const char *option)
+{
+    vmstate_register(NULL, 0, &vmstate_timers, &timers_state);
+    if (!option) {
+        return;
+    }
+
+    icount_warp_timer = qemu_new_timer_ns(rt_clock, icount_warp_rt, NULL);
+    if (strcmp(option, "auto") != 0) {
+        icount_time_shift = strtol(option, NULL, 0);
+        use_icount = 1;
+        return;
+    }
+
+    use_icount = 2;
+
+    /* 125MIPS seems a reasonable initial guess at the guest speed.
+       It will be corrected fairly quickly anyway.  */
+    icount_time_shift = 3;
+
+    /* Have both realtime and virtual time triggers for speed adjustment.
+       The realtime trigger catches emulated time passing too slowly,
+       the virtual time trigger catches emulated time passing too fast.
+       Realtime triggers occur even when idle, so use them less frequently
+       than VM triggers.  */
+    icount_rt_timer = qemu_new_timer_ms(rt_clock, icount_adjust_rt, NULL);
+    qemu_mod_timer(icount_rt_timer,
+                   qemu_get_clock_ms(rt_clock) + 1000);
+    icount_vm_timer = qemu_new_timer_ns(vm_clock, icount_adjust_vm, NULL);
+    qemu_mod_timer(icount_vm_timer,
+                   qemu_get_clock_ns(vm_clock) + get_ticks_per_sec() / 10);
+}
+
+/***********************************************************/
 void hw_error(const char *fmt, ...)
 {
     va_list ap;
@@ -686,7 +961,7 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
 
     while (1) {
         cpu_exec_all();
-        if (use_icount && qemu_next_icount_deadline() <= 0) {
+        if (use_icount && qemu_clock_deadline(vm_clock) <= 0) {
             qemu_notify_event();
         }
         qemu_tcg_wait_io_event();
@@ -903,7 +1178,7 @@ static int tcg_cpu_exec(CPUState *env)
         qemu_icount -= (env->icount_decr.u16.low + env->icount_extra);
         env->icount_decr.u16.low = 0;
         env->icount_extra = 0;
-        count = qemu_icount_round(qemu_next_icount_deadline());
+        count = qemu_icount_round(qemu_clock_deadline(vm_clock));
         qemu_icount += count;
         decr = (count > 0xffff) ? 0xffff : count;
         count -= decr;
@@ -995,22 +1270,6 @@ void set_cpu_log_filename(const char *optarg)
     cpu_set_log_filename(optarg);
 }
 
-/* Return the virtual CPU time, based on the instruction counter.  */
-int64_t cpu_get_icount(void)
-{
-    int64_t icount;
-    CPUState *env = cpu_single_env;;
-
-    icount = qemu_icount;
-    if (env) {
-        if (!can_do_io(env)) {
-            fprintf(stderr, "Bad clock read\n");
-        }
-        icount -= (env->icount_decr.u16.low + env->icount_extra);
-    }
-    return qemu_icount_bias + (icount << icount_time_shift);
-}
-
 void list_cpus(FILE *f, fprintf_function cpu_fprintf, const char *optarg)
 {
     /* XXX: implement xxx_cpu_list for targets that still miss it */
diff --git a/exec-all.h b/exec-all.h
index 1120f84..72ef246 100644
--- a/exec-all.h
+++ b/exec-all.h
@@ -356,4 +356,18 @@ extern int singlestep;
 /* cpu-exec.c */
 extern volatile sig_atomic_t exit_request;
 
+/* Deterministic execution requires that IO only be performed on the last
+   instruction of a TB so that interrupts take effect immediately.  */
+static inline int can_do_io(CPUState *env)
+{
+    if (!use_icount) {
+        return 1;
+    }
+    /* If not executing code then assume we are ok.  */
+    if (!env->current_tb) {
+        return 1;
+    }
+    return env->can_do_io != 0;
+}
+
 #endif
diff --git a/exec.c b/exec.c
index d0cbf15..9dc4edb 100644
--- a/exec.c
+++ b/exec.c
@@ -125,9 +125,6 @@ CPUState *cpu_single_env;
    1 = Precise instruction counting.
    2 = Adaptive rate instruction counting.  */
 int use_icount = 0;
-/* Current instruction counter.  While executing translated code this may
-   include some instructions that have not yet been executed.  */
-int64_t qemu_icount;
 
 typedef struct PageDesc {
     /* list of TBs intersecting this ram page */
diff --git a/qemu-common.h b/qemu-common.h
index b1b8053..b1d2f0f 100644
--- a/qemu-common.h
+++ b/qemu-common.h
@@ -96,6 +96,10 @@ static inline char *realpath(const char *path, char *resolved_path)
 }
 #endif
 
+/* icount */
+void configure_icount(const char *option);
+extern int use_icount;
+
 /* FIXME: Remove NEED_CPU_H.  */
 #ifndef NEED_CPU_H
 
diff --git a/qemu-timer.c b/qemu-timer.c
index ebb5089..8129af6 100644
--- a/qemu-timer.c
+++ b/qemu-timer.c
@@ -46,82 +46,6 @@
 
 #include "qemu-timer.h"
 
-/* Conversion factor from emulated instructions to virtual clock ticks.  */
-int icount_time_shift;
-/* Arbitrarily pick 1MIPS as the minimum allowable speed.  */
-#define MAX_ICOUNT_SHIFT 10
-/* Compensate for varying guest execution speed.  */
-int64_t qemu_icount_bias;
-static QEMUTimer *icount_rt_timer;
-static QEMUTimer *icount_vm_timer;
-
-/***********************************************************/
-/* guest cycle counter */
-
-typedef struct TimersState {
-    int64_t cpu_ticks_prev;
-    int64_t cpu_ticks_offset;
-    int64_t cpu_clock_offset;
-    int32_t cpu_ticks_enabled;
-    int64_t dummy;
-} TimersState;
-
-TimersState timers_state;
-
-/* return the host CPU cycle counter and handle stop/restart */
-int64_t cpu_get_ticks(void)
-{
-    if (use_icount) {
-        return cpu_get_icount();
-    }
-    if (!timers_state.cpu_ticks_enabled) {
-        return timers_state.cpu_ticks_offset;
-    } else {
-        int64_t ticks;
-        ticks = cpu_get_real_ticks();
-        if (timers_state.cpu_ticks_prev > ticks) {
-            /* Note: non increasing ticks may happen if the host uses
-               software suspend */
-            timers_state.cpu_ticks_offset += timers_state.cpu_ticks_prev - ticks;
-        }
-        timers_state.cpu_ticks_prev = ticks;
-        return ticks + timers_state.cpu_ticks_offset;
-    }
-}
-
-/* return the host CPU monotonic timer and handle stop/restart */
-static int64_t cpu_get_clock(void)
-{
-    int64_t ti;
-    if (!timers_state.cpu_ticks_enabled) {
-        return timers_state.cpu_clock_offset;
-    } else {
-        ti = get_clock();
-        return ti + timers_state.cpu_clock_offset;
-    }
-}
-
-/* enable cpu_get_ticks() */
-void cpu_enable_ticks(void)
-{
-    if (!timers_state.cpu_ticks_enabled) {
-        timers_state.cpu_ticks_offset -= cpu_get_real_ticks();
-        timers_state.cpu_clock_offset -= get_clock();
-        timers_state.cpu_ticks_enabled = 1;
-    }
-}
-
-/* disable cpu_get_ticks() : the clock is stopped. You must not call
-   cpu_get_ticks() after that.  */
-void cpu_disable_ticks(void)
-{
-    if (timers_state.cpu_ticks_enabled) {
-        timers_state.cpu_ticks_offset = cpu_get_ticks();
-        timers_state.cpu_clock_offset = cpu_get_clock();
-        timers_state.cpu_ticks_enabled = 0;
-    }
-}
-
 /***********************************************************/
 /* timers */
 
@@ -133,7 +57,6 @@ struct QEMUClock {
     int type;
     int enabled;
 
-    QEMUTimer *warp_timer;
     QEMUTimer *active_timers;
 
     NotifierList reset_notifiers;
@@ -252,61 +175,6 @@ static void dynticks_rearm_timer(struct qemu_alarm_timer *t, int64_t delta);
 
 #endif /* _WIN32 */
 
-/* Correlation between real and virtual time is always going to be
-   fairly approximate, so ignore small variation.
-   When the guest is idle real and virtual time will be aligned in
-   the IO wait loop.  */
-#define ICOUNT_WOBBLE (get_ticks_per_sec() / 10)
-
-static void icount_adjust(void)
-{
-    int64_t cur_time;
-    int64_t cur_icount;
-    int64_t delta;
-    static int64_t last_delta;
-    /* If the VM is not running, then do nothing.  */
-    if (!runstate_is_running())
-        return;
-
-    cur_time = cpu_get_clock();
-    cur_icount = qemu_get_clock_ns(vm_clock);
-    delta = cur_icount - cur_time;
-    /* FIXME: This is a very crude algorithm, somewhat prone to oscillation.  */
-    if (delta > 0
-        && last_delta + ICOUNT_WOBBLE < delta * 2
-        && icount_time_shift > 0) {
-        /* The guest is getting too far ahead.  Slow time down.  */
-        icount_time_shift--;
-    }
-    if (delta < 0
-        && last_delta - ICOUNT_WOBBLE > delta * 2
-        && icount_time_shift < MAX_ICOUNT_SHIFT) {
-        /* The guest is getting too far behind.  Speed time up.  */
-        icount_time_shift++;
-    }
-    last_delta = delta;
-    qemu_icount_bias = cur_icount - (qemu_icount << icount_time_shift);
-}
-
-static void icount_adjust_rt(void * opaque)
-{
-    qemu_mod_timer(icount_rt_timer,
-                   qemu_get_clock_ms(rt_clock) + 1000);
-    icount_adjust();
-}
-
-static void icount_adjust_vm(void * opaque)
-{
-    qemu_mod_timer(icount_vm_timer,
-                   qemu_get_clock_ns(vm_clock) + get_ticks_per_sec() / 10);
-    icount_adjust();
-}
-
-int64_t qemu_icount_round(int64_t count)
-{
-    return (count + (1 << icount_time_shift) - 1) >> icount_time_shift;
-}
-
 static struct qemu_alarm_timer alarm_timers[] = {
 #ifndef _WIN32
 #ifdef __linux__
@@ -411,90 +279,6 @@ void qemu_clock_enable(QEMUClock *clock, int enabled)
     clock->enabled = enabled;
 }
 
-static int64_t vm_clock_warp_start;
-
-static void icount_warp_rt(void *opaque)
-{
-    if (vm_clock_warp_start == -1) {
-        return;
-    }
-
-    if (runstate_is_running()) {
-        int64_t clock = qemu_get_clock_ns(rt_clock);
-        int64_t warp_delta = clock - vm_clock_warp_start;
-        if (use_icount == 1) {
-            qemu_icount_bias += warp_delta;
-        } else {
-            /*
-             * In adaptive mode, do not let the vm_clock run too
-             * far ahead of real time.
-             */
-            int64_t cur_time = cpu_get_clock();
-            int64_t cur_icount = qemu_get_clock_ns(vm_clock);
-            int64_t delta = cur_time - cur_icount;
-            qemu_icount_bias += MIN(warp_delta, delta);
-        }
-        if (qemu_timer_expired(vm_clock->active_timers,
-                               qemu_get_clock_ns(vm_clock))) {
-            qemu_notify_event();
-        }
-    }
-    vm_clock_warp_start = -1;
-}
-
-void qemu_clock_warp(QEMUClock *clock)
-{
-    int64_t deadline;
-
-    if (!clock->warp_timer) {
-        return;
-    }
-
-    /*
-     * There are too many global variables to make the "warp" behavior
-     * applicable to other clocks.  But a clock argument removes the
-     * need for if statements all over the place.
-     */
-    assert(clock == vm_clock);
-
-    /*
-     * If the CPUs have been sleeping, advance the vm_clock timer now.  This
-     * ensures that the deadline for the timer is computed correctly below.
-     * This also makes sure that the insn counter is synchronized before the
-     * CPU starts running, in case the CPU is woken by an event other than
-     * the earliest vm_clock timer.
-     */
-    icount_warp_rt(NULL);
-    if (!all_cpu_threads_idle() || !clock->active_timers) {
-        qemu_del_timer(clock->warp_timer);
-        return;
-    }
-
-    vm_clock_warp_start = qemu_get_clock_ns(rt_clock);
-    deadline = qemu_next_icount_deadline();
-    if (deadline > 0) {
-        /*
-         * Ensure the vm_clock proceeds even when the virtual CPU goes to
-         * sleep.  Otherwise, the CPU might be waiting for a future timer
-         * interrupt to wake it up, but the interrupt never comes because
-         * the vCPU isn't running any insns and thus doesn't advance the
-         * vm_clock.
-         *
-         * An extreme solution for this problem would be to never let VCPUs
-         * sleep in icount mode if there is a pending vm_clock timer; rather
-         * time could just advance to the next vm_clock event.  Instead, we
-         * do stop VCPUs and only advance vm_clock after some "real" time,
-         * (related to the time left until the next event) has passed.  This
-         * rt_clock timer will do this.  This avoids that the warps are too
-         * visible externally---for example, you will not be sending network
-         * packets continously instead of every 100ms.
-         */
-        qemu_mod_timer(clock->warp_timer, vm_clock_warp_start + deadline);
-    } else {
-        qemu_notify_event();
-    }
-}
-
 int64_t qemu_clock_has_timers(QEMUClock *clock)
 {
     return !!clock->active_timers;
@@ -709,52 +493,6 @@ void qemu_get_timer(QEMUFile *f, QEMUTimer *ts)
     }
 }
 
-static const VMStateDescription vmstate_timers = {
-    .name = "timer",
-    .version_id = 2,
-    .minimum_version_id = 1,
-    .minimum_version_id_old = 1,
-    .fields      = (VMStateField []) {
-        VMSTATE_INT64(cpu_ticks_offset, TimersState),
-        VMSTATE_INT64(dummy, TimersState),
-        VMSTATE_INT64_V(cpu_clock_offset, TimersState, 2),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
-void configure_icount(const char *option)
-{
-    vmstate_register(NULL, 0, &vmstate_timers, &timers_state);
-    if (!option)
-        return;
-
-    vm_clock->warp_timer = qemu_new_timer_ns(rt_clock, icount_warp_rt, NULL);
-
-    if (strcmp(option, "auto") != 0) {
-        icount_time_shift = strtol(option, NULL, 0);
-        use_icount = 1;
-        return;
-    }
-
-    use_icount = 2;
-
-    /* 125MIPS seems a reasonable initial guess at the guest speed.
-       It will be corrected fairly quickly anyway.  */
-    icount_time_shift = 3;
-
-    /* Have both realtime and virtual time triggers for speed adjustment.
-       The realtime trigger catches emulated time passing too slowly,
-       the virtual time trigger catches emulated time passing too fast.
-       Realtime triggers occur even when idle, so use them less frequently
-       than VM triggers.  */
-    icount_rt_timer = qemu_new_timer_ms(rt_clock, icount_adjust_rt, NULL);
-    qemu_mod_timer(icount_rt_timer,
-                   qemu_get_clock_ms(rt_clock) + 1000);
-    icount_vm_timer = qemu_new_timer_ns(vm_clock, icount_adjust_vm, NULL);
-    qemu_mod_timer(icount_vm_timer,
-                   qemu_get_clock_ns(vm_clock) + get_ticks_per_sec() / 10);
-}
-
 void qemu_run_all_timers(void)
 {
     alarm_timer->pending = 0;
@@ -821,23 +559,6 @@ static void host_alarm_handler(int host_signum)
     }
 }
 
-int64_t qemu_next_icount_deadline(void)
-{
-    /* To avoid problems with overflow limit this to 2^32.  */
-    int64_t delta = INT32_MAX;
-
-    assert(use_icount);
-    if (vm_clock->active_timers) {
-        delta = vm_clock->active_timers->expire_time -
-                     qemu_get_clock_ns(vm_clock);
-    }
-
-    if (delta < 0)
-        delta = 0;
-
-    return delta;
-}
-
 #if defined(__linux__)
 
 #include "compatfd.h"
diff --git a/qemu-timer.h b/qemu-timer.h
index 4578075..ce576b9 100644
--- a/qemu-timer.h
+++ b/qemu-timer.h
@@ -58,9 +58,7 @@ int qemu_timer_expired(QEMUTimer *timer_head, int64_t current_time);
 
 void qemu_run_all_timers(void);
 int qemu_alarm_pending(void);
-int64_t qemu_next_icount_deadline(void);
 void configure_alarms(char const *opt);
-void configure_icount(const char *option);
 int qemu_calculate_timeout(void);
 void init_clocks(void);
 int init_timer_alarm(void);
@@ -153,12 +151,8 @@ void ptimer_run(ptimer_state *s, int oneshot);
 void ptimer_stop(ptimer_state *s);
 
 /* icount */
-int64_t qemu_icount_round(int64_t count);
-extern int64_t qemu_icount;
-extern int use_icount;
-extern int icount_time_shift;
-extern int64_t qemu_icount_bias;
 int64_t cpu_get_icount(void);
+int64_t cpu_get_clock(void);
 
 /*******************************************/
 /* host CPU ticks (if available) */
@@ -314,22 +308,6 @@ static inline int64_t cpu_get_real_ticks (void)
 }
 #endif
 
-#ifdef NEED_CPU_H
-/* Deterministic execution requires that IO only be performed on the last
-   instruction of a TB so that interrupts take effect immediately.  */
-static inline int can_do_io(CPUState *env)
-{
-    if (!use_icount)
-        return 1;
-
-    /* If not executing code then assume we are ok.  */
-    if (!env->current_tb)
-        return 1;
-
-    return env->can_do_io != 0;
-}
-#endif
-
 #ifdef CONFIG_PROFILER
 static inline int64_t profile_getclock(void)
 {
