[v6,5/7] gpio: mockup: add set_config to support pull up/down
diff mbox series

Message ID 20191105020429.18942-6-warthog618@gmail.com
State New
Headers show
Series
  • gpio: expose line bias flags to userspace
Related show

Commit Message

Kent Gibson Nov. 5, 2019, 2:04 a.m. UTC
Add support for the pull up/down state set via gpiolib line requests to
be reflected in the state of the mockup.
Use case is for testing of the GPIO uAPI, specifically the pull up/down
flags.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 drivers/gpio/gpio-mockup.c | 94 ++++++++++++++++++++++++--------------
 1 file changed, 60 insertions(+), 34 deletions(-)

Patch
diff mbox series

diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c
index 213aedc97dc2..c28219962ae2 100644
--- a/drivers/gpio/gpio-mockup.c
+++ b/drivers/gpio/gpio-mockup.c
@@ -146,6 +146,61 @@  static void gpio_mockup_set_multiple(struct gpio_chip *gc,
 	mutex_unlock(&chip->lock);
 }
 
+static int gpio_mockup_apply_pull(struct gpio_mockup_chip *chip,
+				  unsigned int offset, int value)
+{
+	struct gpio_desc *desc;
+	struct gpio_chip *gc;
+	struct irq_sim *sim;
+	int curr, irq, irq_type;
+
+	gc = &chip->gc;
+	desc = &gc->gpiodev->descs[offset];
+	sim = &chip->irqsim;
+
+	mutex_lock(&chip->lock);
+
+	if (test_bit(FLAG_REQUESTED, &desc->flags) &&
+		!test_bit(FLAG_IS_OUT, &desc->flags)) {
+		curr = __gpio_mockup_get(chip, offset);
+		if (curr == value)
+			goto out;
+
+		irq = irq_sim_irqnum(sim, offset);
+		irq_type = irq_get_trigger_type(irq);
+
+		if ((value == 1 && (irq_type & IRQ_TYPE_EDGE_RISING)) ||
+			(value == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING)))
+			irq_sim_fire(sim, offset);
+	}
+
+	/* Change the value unless we're actively driving the line. */
+	if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
+		!test_bit(FLAG_IS_OUT, &desc->flags))
+		__gpio_mockup_set(chip, offset, value);
+
+out:
+	chip->lines[offset].pull = value;
+	mutex_unlock(&chip->lock);
+	return 0;
+}
+
+static int gpio_mockup_set_config(struct gpio_chip *gc,
+				  unsigned int offset, unsigned long config)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_BIAS_PULL_UP:
+		return gpio_mockup_apply_pull(chip, offset, 1);
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		return gpio_mockup_apply_pull(chip, offset, 0);
+	default:
+		break;
+	}
+	return -ENOTSUPP;
+}
+
 static int gpio_mockup_dirout(struct gpio_chip *gc,
 			      unsigned int offset, int value)
 {
@@ -226,12 +281,8 @@  static ssize_t gpio_mockup_debugfs_write(struct file *file,
 					 size_t size, loff_t *ppos)
 {
 	struct gpio_mockup_dbgfs_private *priv;
-	int rv, val, curr, irq, irq_type;
-	struct gpio_mockup_chip *chip;
+	int rv, val;
 	struct seq_file *sfile;
-	struct gpio_desc *desc;
-	struct gpio_chip *gc;
-	struct irq_sim *sim;
 
 	if (*ppos != 0)
 		return -EINVAL;
@@ -244,35 +295,9 @@  static ssize_t gpio_mockup_debugfs_write(struct file *file,
 
 	sfile = file->private_data;
 	priv = sfile->private;
-	chip = priv->chip;
-	gc = &chip->gc;
-	desc = &gc->gpiodev->descs[priv->offset];
-	sim = &chip->irqsim;
-
-	mutex_lock(&chip->lock);
-
-	if (test_bit(FLAG_REQUESTED, &desc->flags) &&
-	    !test_bit(FLAG_IS_OUT, &desc->flags)) {
-		curr = __gpio_mockup_get(chip, priv->offset);
-		if (curr == val)
-			goto out;
-
-		irq = irq_sim_irqnum(sim, priv->offset);
-		irq_type = irq_get_trigger_type(irq);
-
-		if ((val == 1 && (irq_type & IRQ_TYPE_EDGE_RISING)) ||
-		    (val == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING)))
-			irq_sim_fire(sim, priv->offset);
-	}
-
-	/* Change the value unless we're actively driving the line. */
-	if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
-	    !test_bit(FLAG_IS_OUT, &desc->flags))
-		__gpio_mockup_set(chip, priv->offset, val);
-
-out:
-	chip->lines[priv->offset].pull = val;
-	mutex_unlock(&chip->lock);
+	rv = gpio_mockup_apply_pull(priv->chip, priv->offset, val);
+	if (rv)
+		return rv;
 
 	return size;
 }
@@ -418,6 +443,7 @@  static int gpio_mockup_probe(struct platform_device *pdev)
 	gc->direction_output = gpio_mockup_dirout;
 	gc->direction_input = gpio_mockup_dirin;
 	gc->get_direction = gpio_mockup_get_direction;
+	gc->set_config = gpio_mockup_set_config;
 	gc->to_irq = gpio_mockup_to_irq;
 	gc->free = gpio_mockup_free;