[v5,7/7] gpio: add new SET_CONFIG ioctl() to gpio chardev
diff mbox series

Message ID 20191104153841.16911-8-warthog618@gmail.com
State New
Headers show
Series
  • gpio: expose line bias flags to userspace
Related show

Commit Message

Kent Gibson Nov. 4, 2019, 3:38 p.m. UTC
Add the GPIOHANDLE_SET_CONFIG_IOCTL to the gpio chardev.
The ioctl allows some of the configuration of a requested handle to be
changed without having to release the line.
The primary use case is the changing of direction for bi-directional
lines.

Based on initial work by Bartosz Golaszewski <bgolaszewski@baylibre.com>

Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 drivers/gpio/gpiolib.c    | 69 +++++++++++++++++++++++++++++++++++++++
 include/uapi/linux/gpio.h | 18 ++++++++++
 2 files changed, 87 insertions(+)

Patch
diff mbox series

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index dac1914155cc..969c0eb878df 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -475,6 +475,73 @@  static int linehandle_validate_flags(u32 flags)
 	return 0;
 }
 
+static void linehandle_configure_flag(unsigned long *flagsp,
+				      u32 bit, bool active)
+{
+	if (active)
+		set_bit(bit, flagsp);
+	else
+		clear_bit(bit, flagsp);
+}
+
+static long linehandle_set_config(struct linehandle_state *lh,
+				  void __user *ip)
+{
+	struct gpiohandle_config gcnf;
+	struct gpio_desc *desc;
+	int i, ret;
+	u32 lflags;
+	unsigned long *flagsp;
+
+	if (copy_from_user(&gcnf, ip, sizeof(gcnf)))
+		return -EFAULT;
+
+	lflags = gcnf.flags;
+	ret = linehandle_validate_flags(lflags);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < lh->numdescs; i++) {
+		desc = lh->descs[i];
+		flagsp = &desc->flags;
+
+		linehandle_configure_flag(flagsp, FLAG_ACTIVE_LOW,
+			lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW);
+
+		linehandle_configure_flag(flagsp, FLAG_OPEN_DRAIN,
+			lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN);
+
+		linehandle_configure_flag(flagsp, FLAG_OPEN_SOURCE,
+			lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE);
+
+		linehandle_configure_flag(flagsp, FLAG_PULL_UP,
+			lflags & GPIOHANDLE_REQUEST_BIAS_PULL_UP);
+
+		linehandle_configure_flag(flagsp, FLAG_PULL_DOWN,
+			lflags & GPIOHANDLE_REQUEST_BIAS_PULL_DOWN);
+
+		linehandle_configure_flag(flagsp, FLAG_BIAS_DISABLE,
+			lflags & GPIOHANDLE_REQUEST_BIAS_DISABLE);
+
+		/*
+		 * Lines have to be requested explicitly for input
+		 * or output, else the line will be treated "as is".
+		 */
+		if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
+			int val = !!gcnf.default_values[i];
+
+			ret = gpiod_direction_output(desc, val);
+			if (ret)
+				return ret;
+		} else if (lflags & GPIOHANDLE_REQUEST_INPUT) {
+			ret = gpiod_direction_input(desc);
+			if (ret)
+				return ret;
+		}
+	}
+	return 0;
+}
+
 static long linehandle_ioctl(struct file *filep, unsigned int cmd,
 			     unsigned long arg)
 {
@@ -525,6 +592,8 @@  static long linehandle_ioctl(struct file *filep, unsigned int cmd,
 					      lh->descs,
 					      NULL,
 					      vals);
+	} else if (cmd == GPIOHANDLE_SET_CONFIG_IOCTL) {
+		return linehandle_set_config(lh, ip);
 	}
 	return -EINVAL;
 }
diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h
index 7cc21c3b0839..799cf823d493 100644
--- a/include/uapi/linux/gpio.h
+++ b/include/uapi/linux/gpio.h
@@ -100,6 +100,24 @@  struct gpiohandle_request {
 	int fd;
 };
 
+/**
+ * struct gpiohandle_config - Configuration for a GPIO handle request
+ * @flags: updated flags for the requested GPIO lines, such as
+ * GPIOHANDLE_REQUEST_OUTPUT, GPIOHANDLE_REQUEST_ACTIVE_LOW etc, OR:ed
+ * together
+ * @default_values: if the GPIOHANDLE_REQUEST_OUTPUT is set in flags,
+ * this specifies the default output value, should be 0 (low) or
+ * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high)
+ * @padding: reserved for future use and should be zero filled
+ */
+struct gpiohandle_config {
+	__u32 flags;
+	__u8 default_values[GPIOHANDLES_MAX];
+	__u32 padding[4]; /* padding for future use */
+};
+
+#define GPIOHANDLE_SET_CONFIG_IOCTL _IOWR(0xB4, 0x0a, struct gpiohandle_config)
+
 /**
  * struct gpiohandle_data - Information of values on a GPIO handle
  * @values: when getting the state of lines this contains the current