| Message ID | 20191101032858.19013-4-gch981213@gmail.com |
|---|---|
| State | Accepted, archived |
| Delegated to: | Chuanhong Guo |
| Headers | show |
| Series | mediatek: add mt7629 subtarget | expand |
Hi, > @@ -75,6 +76,7 @@ > gmac0: mac@0 { > compatible = "mediatek,eth-mac"; > reg = <0>; > + mtd-mac-address = <&factory 0x2a>; Strange indent here ... > phy-mode = "sgmii"; > fixed-link { > speed = <1000>; @@ -86,6 +88,7 @@ > gmac1: mac@1 { > compatible = "mediatek,eth-mac"; > reg = <1>; > + mtd-mac-address = <&factory 0x24>; ... and here. Best Adrian
On Fri, Nov 1, 2019 at 3:10 PM <mail@adrianschmutzler.de> wrote: > > Hi, > > > @@ -75,6 +76,7 @@ > > gmac0: mac@0 { > > compatible = "mediatek,eth-mac"; > > reg = <0>; > > + mtd-mac-address = <&factory 0x2a>; > > Strange indent here ... Ouch...This entire eth node uses spaces for indentation, and the tab width in my editor is 4 spaces... Fixed in my staging tree: https://git.openwrt.org/?p=openwrt/staging/981213.git;a=shortlog;h=refs/heads/mt7629_target Regards, Chuanhong Guo
diff --git a/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts b/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts index f3fadd301a..17ce6046da 100644 --- a/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts +++ b/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts @@ -10,7 +10,7 @@ / { model = "MediaTek MT7629 reference board"; - compatible = "mediatek,mt7629-rfb", "mediatek,mt7629"; + compatible = "mediatek,mt7629-lynx-rfb", "mediatek,mt7629"; aliases { serial0 = &uart0; @@ -18,6 +18,7 @@ chosen { stdout-path = "serial0:115200n8"; + bootargs = "earlycon=uart8250,mmio32,0x11002000"; }; gpio-keys { @@ -75,6 +76,7 @@ gmac0: mac@0 { compatible = "mediatek,eth-mac"; reg = <0>; + mtd-mac-address = <&factory 0x2a>; phy-mode = "sgmii"; fixed-link { speed = <1000>; @@ -86,6 +88,7 @@ gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; + mtd-mac-address = <&factory 0x24>; phy-handle = <&phy0>; }; @@ -153,13 +156,13 @@ }; factory: partition@70000 { - label = "Factory"; + label = "factory"; reg = <0x70000 0x40000>; read-only; }; partition@b0000 { - label = "Kernel"; + label = "firmware"; reg = <0xb0000 0xb50000>; }; };
This patch did the following things: 1. rename device compatible string 2. add earlycon into cmdline 3. add mac address location according to mt7629 eeprom layout 4. rename mtd partitions Signed-off-by: Chuanhong Guo <gch981213@gmail.com> --- .../files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)