@@ -177,6 +177,7 @@ freescale_imx6qsabreauto_defconfig: { extends: .defconfig }
freescale_imx6qsabresd_defconfig: { extends: .defconfig }
freescale_imx6sxsabresd_defconfig: { extends: .defconfig }
freescale_imx7dsabresd_defconfig: { extends: .defconfig }
+freescale_imx7ulpevk_defconfig: { extends: .defconfig }
freescale_imx8mmevk_defconfig: { extends: .defconfig }
freescale_imx8mqevk_defconfig: { extends: .defconfig }
freescale_imx8qxpmek_defconfig: { extends: .defconfig }
@@ -879,6 +879,8 @@ F: package/tinymembench/
F: package/whois/
N: Fabrice Goucem <fabrice.goucem@nxp.com>
+F: board/freescale/imx7ulpevk/
+F: configs/freescale_imx7ulpevk_defconfig
F: package/freescale-imx/imx-m4-firmware/
N: Falco Hyfing <hyfinglists@gmail.com>
new file mode 100644
@@ -0,0 +1,60 @@
+****************************
+Freescale i.MX7ULP EVK board
+****************************
+
+This file documents the Buildroot support for the Freescale i.MX7ULP EVK board.
+
+Build
+=====
+
+First, configure Buildroot for your i.MX7ULP EVK board:
+
+ make freescale_imx7ulpevk_defconfig
+
+Build all components:
+
+ make
+
+You will find in output/images/ the following files:
+ - boot.vfat
+ - imx7ulp-evkb.dtb
+ - rootfs.ext2
+ - rootfs.ext4
+ - rootfs.tar
+ - sdcard.img
+ - u-boot.imx
+ - zImage
+
+Create a bootable SD card
+=========================
+
+To determine the device associated to the SD card have a look in the
+/proc/partitions file:
+
+ cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on a SD card. Launch the following
+command as root:
+
+ dd if=./output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/freescale/common/imx/genimage.cfg.template.
+
+Boot the i.MX7ULP EVK board
+===========================
+
+To boot your newly created system (refer to the i.MX 7ULP EVK Quick Start Guide [1] for guidance):
+- insert the SD card in the micro SD slot of the board;
+- put a micro USB cable into the Debug USB Port and connect using a terminal
+ emulator at 115200 bps, 8n1;
+- power on the board.
+
+Enjoy!
+
+References
+==========
+[1] https://www.nxp.com/docs/en/user-guide/IMX7ULPQSG.pdf
new file mode 100644
@@ -0,0 +1,27 @@
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyLP0"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/linux-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.19.35_1.0.0"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx7ulp-evkb"
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7ULP=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx7ulp_evk"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/uboot-imx.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.19.35_1.0.0"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
Add basic support for NXP's i.MX7 ULP EVK board: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/evaluation-kit-for-the-i.mx-7ulp-applications-processor:MCIMX7ULP-EVK Signed-off-by: Fabrice Goucem <fabrice.goucem@nxp.com> --- .gitlab-ci.yml | 1 + DEVELOPERS | 2 + board/freescale/imx7ulpevk/readme.txt | 60 ++++++++++++++++++++++++++ configs/freescale_imx7ulpevk_defconfig | 27 ++++++++++++ 4 files changed, 90 insertions(+) create mode 100644 board/freescale/imx7ulpevk/readme.txt create mode 100644 configs/freescale_imx7ulpevk_defconfig