[OpenWrt-Devel] ath79: fix base-files for zyxel, nbg6716 after split
diff mbox series

Message ID 20191027134037.5476-1-freifunk@adrianschmutzler.de
State Accepted
Delegated to: David Bauer
Headers show
Series
  • [OpenWrt-Devel] ath79: fix base-files for zyxel, nbg6716 after split
Related show

Commit Message

Adrian Schmutzler Oct. 27, 2019, 1:40 p.m. UTC
Due to rebase of the base-files split patch after adding support
for zyxel,nbg6716, its base-files were added to the generic
subtarget, although the device belongs to nand.

This moves the definitions to their proper locations.

Fixes: 0130022baec0 ("ath79: split base-files into subtargets")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

---

This is a quick fix. Expect less care than usual.
---
 .../generic/base-files/etc/board.d/02_network |  8 -------
 .../etc/hotplug.d/firmware/10-ath9k-eeprom    |  4 ----
 .../etc/hotplug.d/firmware/11-ath10k-caldata  |  4 ----
 .../base-files/lib/upgrade/platform.sh        |  3 ---
 .../nand/base-files/etc/board.d/02_network    |  8 +++++++
 .../etc/hotplug.d/firmware/10-ath9k-eeprom    | 21 ++++++++++++++++++
 .../etc/hotplug.d/firmware/11-ath10k-caldata  | 22 +++++++++++++++++++
 .../nand/base-files/lib/upgrade/platform.sh   |  3 +++
 8 files changed, 54 insertions(+), 19 deletions(-)
 create mode 100644 target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
 create mode 100644 target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

Patch
diff mbox series

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 7507c6584c..90f622b262 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -261,10 +261,6 @@  ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "3:lan:1" "4:lan:2"
 		;;
-	zyxel,nbg6716)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
-		;;
 	*)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
@@ -399,10 +395,6 @@  ath79_setup_macs()
 	wd,mynet-wifi-rangeextender)
 		lan_mac=$(nvram get et0macaddr)
 		;;
-	zyxel,nbg6716)
-		lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
-		wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
-		;;
 	esac
 
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index f1bc6c3c22..4b07660f02 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -47,10 +47,6 @@  case "$FIRMWARE" in
 		caldata_extract "radiocfg" 0x1000 0x440
 		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
 		;;
-	zyxel,nbg6716)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
-		;;
 	*)
 		caldata_die "board $board is not supported yet"
 		;;
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 91e813f121..b2ec803a72 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -113,10 +113,6 @@  case "$FIRMWARE" in
 	ubnt,unifiac-pro)
 		caldata_extract "EEPROM" 0x5000 0x844
 		;;
-	zyxel,nbg6716)
-		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
-		;;
 	esac
 	;;
 "ath10k/pre-cal-pci-0000:00:00.0.bin")
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
index 83c4e78d25..10756abbaf 100644
--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
@@ -51,9 +51,6 @@  platform_do_upgrade() {
 	ubnt,routerstation-pro)
 		echo "Sysupgrade disabled due bug FS#2428"
 		;;
-	zyxel,nbg6716)
-		nand_do_upgrade "$1"
-		;;
 	*)
 		default_do_upgrade "$1"
 		;;
diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network b/target/linux/ath79/nand/base-files/etc/board.d/02_network
index 65ce439545..1e013f40d1 100755
--- a/target/linux/ath79/nand/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network
@@ -8,6 +8,10 @@  ath79_setup_interfaces()
 	local board="$1"
 
 	case "$board" in
+	zyxel,nbg6716)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
+		;;
 	*)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
@@ -19,6 +23,10 @@  ath79_setup_macs()
 	local board="$1"
 
 	case "$board" in
+	zyxel,nbg6716)
+		lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
+		wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
+		;;
 	esac
 
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
new file mode 100644
index 0000000000..88a40b5d41
--- /dev/null
+++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -0,0 +1,21 @@ 
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath9k-eeprom-ahb-18100000.wmac.bin")
+	case $board in
+	zyxel,nbg6716)
+		caldata_extract "art" 0x1000 0x440
+		ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
+		;;
+	*)
+		caldata_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+esac
diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
new file mode 100644
index 0000000000..75fdd42cdd
--- /dev/null
+++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -0,0 +1,22 @@ 
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+. /lib/functions/k2t.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath10k/cal-pci-0000:00:00.0.bin")
+	case $board in
+	zyxel,nbg6716)
+		caldata_extract "art" 0x5000 0x844
+		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac
diff --git a/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh b/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh
index b02ab9a080..6abd7dd0f1 100644
--- a/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh
@@ -13,6 +13,9 @@  platform_do_upgrade() {
 	local board=$(board_name)
 
 	case "$board" in
+	zyxel,nbg6716)
+		nand_do_upgrade "$1"
+		;;
 	*)
 		default_do_upgrade "$1"
 		;;