[OpenWrt-Devel,1/2] ramips: remove redundant mtd-mac-address for WiFi
diff mbox series

Message ID 20191025120645.3359-1-freifunk@adrianschmutzler.de
State Accepted
Delegated to: John Crispin
Headers show
Series
  • [OpenWrt-Devel,1/2] ramips: remove redundant mtd-mac-address for WiFi
Related show

Commit Message

Adrian Schmutzler Oct. 25, 2019, 12:06 p.m. UTC
When caldata locations are defined with mediatek,mtd-eeprom the
MAC address is automatically read from offset +4. Thus, specifying
that location explicitly is redundant.

This patch removes those redundant definitions.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

---

Not tested on device.
---
 target/linux/ramips/dts/mt7628an_netgear_r6120.dts           | 1 -
 target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts | 1 -
 target/linux/ramips/dts/rt3883_loewe_wmdr-143n.dts           | 3 +--
 3 files changed, 1 insertion(+), 4 deletions(-)

Patch
diff mbox series

diff --git a/target/linux/ramips/dts/mt7628an_netgear_r6120.dts b/target/linux/ramips/dts/mt7628an_netgear_r6120.dts
index e27406aed4..7fd8924145 100644
--- a/target/linux/ramips/dts/mt7628an_netgear_r6120.dts
+++ b/target/linux/ramips/dts/mt7628an_netgear_r6120.dts
@@ -133,7 +133,6 @@ 
 
 &wmac {
 	status = "okay";
-	mtd-mac-address = <&factory 0x4>;
 	mediatek,mtd-eeprom = <&factory 0x0>;
 };
 
diff --git a/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts b/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts
index 644882c6a2..538827b03f 100644
--- a/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts
+++ b/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts
@@ -196,7 +196,6 @@ 
 		reg = <0x0000 0 0 0 0>;
 		mediatek,mtd-eeprom = <&factory 0x8000>;
 		ieee80211-freq-limit = <5000000 6000000>;
-		mtd-mac-address = <&factory 0x8004>;
 	};
 };
 
diff --git a/target/linux/ramips/dts/rt3883_loewe_wmdr-143n.dts b/target/linux/ramips/dts/rt3883_loewe_wmdr-143n.dts
index 66711420ac..8cce0d5f38 100644
--- a/target/linux/ramips/dts/rt3883_loewe_wmdr-143n.dts
+++ b/target/linux/ramips/dts/rt3883_loewe_wmdr-143n.dts
@@ -64,6 +64,5 @@ 
 
 &wmac {
 	status = "okay";
-	ralink,mtd-eeprom = <&factory 0>;
-	mtd-mac-address = <&factory 0x4>;
+	ralink,mtd-eeprom = <&factory 0x0>;
 };