Patchwork [v14,08/10] USB ppc4xx: Add Synopsys DWC OTG PCD interrupt function

login
register
mail settings
Submitter Tirumala Marri
Date Oct. 7, 2011, 2:31 a.m.
Message ID <1317954666-11968-1-git-send-email-tmarri@apm.com>
Download mbox | patch
Permalink /patch/118197/
State Superseded
Headers show

Comments

Tirumala Marri - Oct. 7, 2011, 2:31 a.m.
From: Tirumala Marri <tmarri@apm.com>

Implements the DWC OTG PCD Interrupt Service routine.

Signed-off-by: Tirumala R Marri <tmarri@apm.com>
Signed-off-by: Fushen Chen <fchen@apm.com>
Signed-off-by: Mark Miesfeld <mmiesfeld@apm.com>
---
 drivers/usb/dwc/pcd_intr.c | 2311 ++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 2311 insertions(+), 0 deletions(-)
 create mode 100644 drivers/usb/dwc/pcd_intr.c

Patch

diff --git a/drivers/usb/dwc/pcd_intr.c b/drivers/usb/dwc/pcd_intr.c
new file mode 100644
index 0000000..c9a257a
--- /dev/null
+++ b/drivers/usb/dwc/pcd_intr.c
@@ -0,0 +1,2311 @@ 
+/*
+ * DesignWare HS OTG controller driver
+ * Copyright (C) 2006 Synopsys, Inc.
+ * Portions Copyright (C) 2010 Applied Micro Circuits Corporation.
+ *
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see http://www.gnu.org/licenses
+ * or write to the Free Software Foundation, Inc., 51 Franklin Street,
+ * Suite 500, Boston, MA 02110-1335 USA.
+ *
+ * Based on Synopsys driver version 2.60a
+ * Modified by Mark Miesfeld <mmiesfeld@apm.com>
+ * Modified by Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include "driver.h"
+#include "pcd.h"
+
+/**
+ * This function returns pointer to in ep struct with number num
+ */
+static struct pcd_ep *get_in_ep(struct dwc_pcd *pcd, u32 num)
+{
+	if (num == 0) {
+		return &pcd->ep0;
+	} else {
+		u32 i;
+		int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
+
+		for (i = 0; i < num_in_eps; ++i) {
+			if (pcd->in_ep[i].dwc_ep.num == num)
+				return &pcd->in_ep[i];
+		}
+	}
+	return NULL;
+}
+
+/**
+ * This function returns pointer to out ep struct with number num
+ */
+static struct pcd_ep *get_out_ep(struct dwc_pcd *pcd, u32 num)
+{
+	if (num == 0) {
+		return &pcd->ep0;
+	} else {
+		u32 i;
+		int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
+
+		for (i = 0; i < num_out_eps; ++i) {
+			if (pcd->out_ep[i].dwc_ep.num == num)
+				return &pcd->out_ep[i];
+		}
+	}
+	return NULL;
+}
+
+/**
+ * This functions gets a pointer to an EP from the wIndex address
+ * value of the control request.
+ */
+static struct pcd_ep *get_ep_by_addr(struct dwc_pcd *pcd, u16 index)
+{
+	struct pcd_ep *ep;
+
+	if (!(index & USB_ENDPOINT_NUMBER_MASK))
+		return &pcd->ep0;
+
+	list_for_each_entry(ep, &pcd->gadget.ep_list, ep.ep_list) {
+		u8 bEndpointAddress;
+
+		if (!ep->desc)
+			continue;
+
+		bEndpointAddress = ep->desc->bEndpointAddress;
+		if ((index ^ bEndpointAddress) & USB_DIR_IN)
+			continue;
+
+		if ((index & 0x0f) == (bEndpointAddress & 0x0f))
+			return ep;
+	}
+	return NULL;
+}
+
+/**
+ * This function checks the EP request queue, if the queue is not
+ * empty the next request is started.
+ */
+void dwc_start_next_request(struct pcd_ep *ep)
+{
+	if (!list_empty(&ep->queue)) {
+		struct pcd_request *req;
+
+		req = list_entry(ep->queue.next, struct pcd_request, queue);
+
+		/* Setup and start the Transfer */
+		ep->dwc_ep.start_xfer_buff = req->req.buf;
+		ep->dwc_ep.xfer_buff = req->req.buf;
+		ep->dwc_ep.xfer_len = req->req.length;
+		ep->dwc_ep.xfer_count = 0;
+		ep->dwc_ep.dma_addr = req->req.dma;
+		ep->dwc_ep.sent_zlp = 0;
+		ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
+
+		/*
+		 * Added-sr: 2007-07-26
+		 *
+		 * When a new transfer will be started, mark this
+		 * endpoint as active. This way it will be blocked
+		 * for further transfers, until the current transfer
+		 * is finished.
+		 */
+		if (dwc_has_feature(GET_CORE_IF(ep->pcd), DWC_LIMITED_XFER))
+			ep->dwc_ep.active = 1;
+
+		dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
+	}
+}
+
+/**
+ * This function handles the SOF Interrupts. At this time the SOF
+ * Interrupt is disabled.
+ */
+static int dwc_otg_pcd_handle_sof_intr(struct dwc_pcd *pcd)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	u32 gintsts;
+
+	/* Clear interrupt */
+	gintsts = 0;
+	gintsts |= DWC_INTMSK_STRT_OF_FRM;
+	dwc_reg_write((core_if->core_global_regs), DWC_GINTSTS, gintsts);
+	return 1;
+}
+
+/**
+ * This function reads the 8 bytes of the setup packet from the Rx FIFO into the
+ * destination buffer.  It is called from the Rx Status Queue Level (RxStsQLvl)
+ * interrupt routine when a SETUP packet has been received in Slave mode.
+ */
+static void dwc_otg_read_setup_packet(struct core_if *core_if, u32 * dest)
+{
+	dest[0] = dwc_read_fifo32(core_if->data_fifo[0]);
+	dest[1] = dwc_read_fifo32(core_if->data_fifo[0]);
+}
+
+/**
+ * This function handles the Rx Status Queue Level Interrupt, which
+ * indicates that there is a least one packet in the Rx FIFO.  The
+ * packets are moved from the FIFO to memory, where they will be
+ * processed when the Endpoint Interrupt Register indicates Transfer
+ * Complete or SETUP Phase Done.
+ *
+ * Repeat the following until the Rx Status Queue is empty:
+ *	 -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
+ *		info
+ *	 -# If Receive FIFO is empty then skip to step Clear the interrupt
+ *		and exit
+ *	 -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
+ *		SETUP data to the buffer
+ *	 -# If OUT Data Packet call dwc_otg_read_packet to copy the data
+ *		to the destination buffer
+ */
+static int dwc_otg_pcd_handle_rx_status_q_level_intr(struct dwc_pcd *pcd)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	ulong global_regs = core_if->core_global_regs;
+	u32 gintmask = 0;
+	u32 grxsts;
+	struct pcd_ep *ep;
+	u32 gintsts;
+
+	/* Disable the Rx Status Queue Level interrupt */
+	gintmask |= DWC_INTMSK_RXFIFO_NOT_EMPT;
+	dwc_reg_modify(global_regs, DWC_GINTMSK, gintmask, 0);
+
+	/* Get the Status from the top of the FIFO */
+	grxsts = dwc_reg_read(global_regs, DWC_GRXSTSP);
+
+	/* Get pointer to EP structure */
+	ep = get_out_ep(pcd, DWC_DM_RXSTS_CHAN_NUM_RD(grxsts));
+
+	switch (DWC_DM_RXSTS_PKT_STS_RD(grxsts)) {
+	case DWC_DSTS_GOUT_NAK:
+		break;
+	case DWC_STS_DATA_UPDT:
+		if ((grxsts & DWC_DM_RXSTS_BYTE_CNT) && ep->dwc_ep.xfer_buff) {
+			dwc_otg_read_packet(core_if, ep->dwc_ep.xfer_buff,
+					    DWC_DM_RXSTS_BYTE_CNT_RD(grxsts));
+			ep->dwc_ep.xfer_count +=
+			    DWC_DM_RXSTS_BYTE_CNT_RD(grxsts);
+			ep->dwc_ep.xfer_buff +=
+			    DWC_DM_RXSTS_BYTE_CNT_RD(grxsts);
+		}
+		break;
+	case DWC_STS_XFER_COMP:
+		break;
+	case DWC_DSTS_SETUP_COMP:
+		break;
+	case DWC_DSTS_SETUP_UPDT:
+		dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
+		ep->dwc_ep.xfer_count += DWC_DM_RXSTS_BYTE_CNT_RD(grxsts);
+		break;
+	default:
+		pr_err("RX_STS_Q Interrupt: Unknown status %d\n",
+		       DWC_HM_RXSTS_PKT_STS_RD(grxsts));
+		break;
+	}
+
+	/* Enable the Rx Status Queue Level interrupt */
+	dwc_reg_modify(global_regs, DWC_GINTMSK, 0, gintmask);
+
+	/* Clear interrupt */
+	gintsts = 0;
+	gintsts |= DWC_INTSTS_RXFIFO_NOT_EMPT;
+	dwc_reg_write(global_regs, DWC_GINTSTS, gintsts);
+
+	return 1;
+}
+
+/**
+ * This function examines the Device IN Token Learning Queue to
+ * determine the EP number of the last IN token received.  This
+ * implementation is for the Mass Storage device where there are only
+ * 2 IN EPs (Control-IN and BULK-IN).
+ *
+ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
+ * are 8 EP Numbers in each of the other possible DTKNQ Registers.
+ */
+static int get_ep_of_last_in_token(struct core_if *core_if)
+{
+	ulong regs = core_if->dev_if->dev_global_regs;
+	const u32 TOKEN_Q_DEPTH =
+	    DWC_HWCFG2_DEV_TKN_Q_DEPTH_RD(core_if->hwcfg2);
+	/* Number of Token Queue Registers */
+	const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
+	u32 dtknqr1 = 0;
+	u32 in_tkn_epnums[4];
+	int ndx;
+	u32 i;
+	u32 addr = regs + DWC_DTKNQR1;
+	int epnum = 0;
+
+	/* Read the DTKNQ Registers */
+	for (i = 0; i <= DTKNQ_REG_CNT; i++) {
+		in_tkn_epnums[i] = dwc_reg_read(addr, 0);
+
+		if (addr == (regs + DWC_DVBUSDIS))
+			addr = regs + DWC_DTKNQR3_DTHRCTL;
+		else
+			++addr;
+	}
+
+	/* Copy the DTKNQR1 data to the bit field. */
+	dtknqr1 = in_tkn_epnums[0];
+
+	/* Get the EP numbers */
+	in_tkn_epnums[0] = DWC_DTKNQR1_EP_TKN_NO_RD(dtknqr1);
+	ndx = DWC_DTKNQR1_INT_TKN_Q_WR_PTR_RD(dtknqr1) - 1;
+
+	if (ndx == -1) {
+		/*
+		 * Calculate the max queue position.
+		 */
+		int cnt = TOKEN_Q_DEPTH;
+
+		if (TOKEN_Q_DEPTH <= 6)
+			cnt = TOKEN_Q_DEPTH - 1;
+		else if (TOKEN_Q_DEPTH <= 14)
+			cnt = TOKEN_Q_DEPTH - 7;
+		else if (TOKEN_Q_DEPTH <= 22)
+			cnt = TOKEN_Q_DEPTH - 15;
+		else
+			cnt = TOKEN_Q_DEPTH - 23;
+
+		epnum = (in_tkn_epnums[DTKNQ_REG_CNT - 1] >> (cnt * 4)) & 0xF;
+	} else {
+		if (ndx <= 5) {
+			epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
+		} else if (ndx <= 13) {
+			ndx -= 6;
+			epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
+		} else if (ndx <= 21) {
+			ndx -= 14;
+			epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
+		} else if (ndx <= 29) {
+			ndx -= 22;
+			epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
+		}
+	}
+
+	return epnum;
+}
+
+static inline int count_dwords(struct pcd_ep *ep, u32 len)
+{
+	if (len > ep->dwc_ep.maxpacket)
+		len = ep->dwc_ep.maxpacket;
+	return (len + 3) / 4;
+}
+
+/**
+ * This function writes a packet into the Tx FIFO associated with the EP.  For
+ * non-periodic EPs the non-periodic Tx FIFO is written.  For periodic EPs the
+ * periodic Tx FIFO associated with the EP is written with all packets for the
+ * next micro-frame.
+ *
+ * The buffer is padded to DWORD on a per packet basis in
+ * slave/dma mode if the MPS is not DWORD aligned.  The last packet, if
+ * short, is also padded to a multiple of DWORD.
+ *
+ * ep->xfer_buff always starts DWORD aligned in memory and is a
+ * multiple of DWORD in length
+ *
+ * ep->xfer_len can be any number of bytes
+ *
+ * ep->xfer_count is a multiple of ep->maxpacket until the last packet
+ *
+ * FIFO access is DWORD
+ */
+static void dwc_otg_ep_write_packet(struct core_if *core_if, struct dwc_ep *ep,
+				    int dma)
+{
+	u32 i;
+	u32 byte_count;
+	u32 dword_count;
+	u32 fifo;
+	u32 *data_buff = (u32 *) ep->xfer_buff;
+
+	if (ep->xfer_count >= ep->xfer_len)
+		return;
+
+	/* Find the byte length of the packet either short packet or MPS */
+	if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket)
+		byte_count = ep->xfer_len - ep->xfer_count;
+	else
+		byte_count = ep->maxpacket;
+
+	/*
+	 * Find the DWORD length, padded by extra bytes as neccessary if MPS
+	 * is not a multiple of DWORD
+	 */
+	dword_count = (byte_count + 3) / 4;
+
+	fifo = core_if->data_fifo[ep->num];
+
+	if (!dma)
+		for (i = 0; i < dword_count; i++, data_buff++)
+			dwc_write_fifo32(fifo, *data_buff);
+
+	ep->xfer_count += byte_count;
+	ep->xfer_buff += byte_count;
+	ep->dma_addr += byte_count;
+}
+
+/**
+ * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
+ * The active request is checked for the next packet to be loaded into
+ * the non-periodic Tx FIFO.
+ */
+static int dwc_otg_pcd_handle_np_tx_fifo_empty_intr(struct dwc_pcd *pcd)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	ulong global_regs = core_if->core_global_regs;
+	u32 txstatus = 0;
+	u32 gintsts = 0;
+	int epnum;
+	struct pcd_ep *ep;
+	u32 len;
+	int dwords;
+
+	/* Get the epnum from the IN Token Learning Queue. */
+	epnum = get_ep_of_last_in_token(core_if);
+	ep = get_in_ep(pcd, epnum);
+
+	txstatus = dwc_reg_read(global_regs, DWC_GNPTXSTS);
+
+	/*
+	 * While there is space in the queue, space in the FIFO, and data to
+	 * tranfer, write packets to the Tx FIFO
+	 */
+	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
+	dwords = count_dwords(ep, len);
+	while ((DWC_GNPTXSTS_NPTXQSPCAVAIL_RD(txstatus) > 0) &&
+	       (DWC_GNPTXSTS_NPTXFSPCAVAIL_RD(txstatus) > dwords) &&
+	       ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
+		/*
+		 * Added-sr: 2007-07-26
+		 *
+		 * When a new transfer will be started, mark this
+		 * endpoint as active. This way it will be blocked
+		 * for further transfers, until the current transfer
+		 * is finished.
+		 */
+		if (dwc_has_feature(core_if, DWC_LIMITED_XFER))
+			ep->dwc_ep.active = 1;
+
+		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
+		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
+		dwords = count_dwords(ep, len);
+		txstatus = dwc_reg_read(global_regs, DWC_GNPTXSTS);
+	}
+
+	/* Clear nptxfempty interrupt */
+	gintsts |= DWC_INTMSK_RXFIFO_NOT_EMPT;
+	dwc_reg_write(global_regs, DWC_GINTSTS, gintsts);
+
+	/* Re-enable tx-fifo empty interrupt, if packets are stil pending */
+	if (len)
+		dwc_reg_modify(global_regs, DWC_GINTSTS, 0, gintsts);
+	return 1;
+}
+
+/**
+ * This function is called when dedicated Tx FIFO Empty interrupt occurs.
+ * The active request is checked for the next packet to be loaded into
+ * apropriate Tx FIFO.
+ */
+static int write_empty_tx_fifo(struct dwc_pcd *pcd, u32 epnum)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	ulong regs;
+	u32 txstatus = 0;
+	struct pcd_ep *ep;
+	u32 len;
+	int dwords;
+	u32 diepint = 0;
+
+	ep = get_in_ep(pcd, epnum);
+	regs = core_if->dev_if->in_ep_regs[epnum];
+	txstatus = dwc_reg_read(regs, DWC_DTXFSTS);
+
+	/*
+	 * While there is space in the queue, space in the FIFO and data to
+	 * tranfer, write packets to the Tx FIFO
+	 */
+	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
+	dwords = count_dwords(ep, len);
+	while (DWC_DTXFSTS_TXFSSPC_AVAI_RD(txstatus) > dwords
+	       && ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len
+	       && ep->dwc_ep.xfer_len != 0) {
+		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
+		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
+		dwords = count_dwords(ep, len);
+		txstatus = dwc_reg_read(regs, DWC_DTXFSTS);
+	}
+	/* Clear emptyintr */
+	diepint = DWC_DIEPINT_TXFIFO_EMPTY_RW(diepint, 1);
+	dwc_reg_write(in_ep_int_reg(pcd, epnum), 0, diepint);
+	return 1;
+}
+
+/**
+ * This function is called when the Device is disconnected.  It stops any active
+ * requests and informs the Gadget driver of the disconnect.
+ */
+void dwc_otg_pcd_stop(struct dwc_pcd *pcd)
+{
+	int i, num_in_eps, num_out_eps;
+	struct pcd_ep *ep;
+	u32 intr_mask = 0;
+	ulong global_regs = GET_CORE_IF(pcd)->core_global_regs;
+
+	num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
+	num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
+
+	/* Don't disconnect drivers more than once */
+	if (pcd->ep0state == EP0_DISCONNECT)
+		return;
+	pcd->ep0state = EP0_DISCONNECT;
+
+	/* Reset the OTG state. */
+	dwc_otg_pcd_update_otg(pcd, 1);
+
+	/* Disable the NP Tx Fifo Empty Interrupt. */
+	intr_mask |= DWC_INTMSK_NP_TXFIFO_EMPT;
+	dwc_reg_modify(global_regs, DWC_GINTMSK, intr_mask, 0);
+
+	/* Flush the FIFOs */
+	dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0);
+	dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
+
+	/* Prevent new request submissions, kill any outstanding requests  */
+	ep = &pcd->ep0;
+	request_nuke(ep);
+
+	/* Prevent new request submissions, kill any outstanding requests  */
+	for (i = 0; i < num_in_eps; i++)
+		request_nuke((struct pcd_ep *)&pcd->in_ep[i]);
+
+	/* Prevent new request submissions, kill any outstanding requests  */
+	for (i = 0; i < num_out_eps; i++)
+		request_nuke((struct pcd_ep *)&pcd->out_ep[i]);
+
+	/* Report disconnect; the driver is already quiesced */
+	if (pcd->driver && pcd->driver->disconnect) {
+		spin_unlock(&pcd->lock);
+		pcd->driver->disconnect(&pcd->gadget);
+		spin_lock(&pcd->lock);
+	}
+}
+
+/**
+ * This interrupt indicates that ...
+ */
+static int dwc_otg_pcd_handle_i2c_intr(struct dwc_pcd *pcd)
+{
+	u32 intr_mask = 0;
+	u32 gintsts;
+
+	pr_info("Interrupt handler not implemented for i2cintr\n");
+
+	/* Turn off and clean the interrupt */
+	intr_mask |= DWC_INTMSK_I2C_INTR;
+	dwc_reg_modify((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTMSK,
+		     intr_mask, 0);
+
+	gintsts = 0;
+	gintsts |= DWC_INTSTS_I2C_INTR;
+	dwc_reg_write((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTSTS,
+		    gintsts);
+
+	return 1;
+}
+
+/**
+ * This interrupt indicates that ...
+ */
+static int dwc_otg_pcd_handle_early_suspend_intr(struct dwc_pcd *pcd)
+{
+	u32 intr_mask = 0;
+	u32 gintsts;
+
+	pr_info("Early Suspend Detected\n");
+
+	/* Turn off and clean the interrupt */
+	intr_mask |= DWC_INTMSK_EARLY_SUSP;
+	dwc_reg_modify((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTMSK,
+		     intr_mask, 0);
+
+	gintsts = 0;
+	gintsts |= DWC_INTSTS_EARLY_SUSP;
+	dwc_reg_write((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTSTS,
+		    gintsts);
+
+	return 1;
+}
+
+/**
+ * This function configures EPO to receive SETUP packets.
+ *
+ * Program the following fields in the endpoint specific registers for Control
+ * OUT EP 0, in order to receive a setup packet:
+ *
+ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back setup packets)
+ *
+ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back to back setup
+ *   packets)
+ *
+ * In DMA mode, DOEPDMA0 Register with a memory address to store any setup
+ * packets received
+ */
+static void ep0_out_start(struct core_if *core_if, struct dwc_pcd *pcd)
+{
+	struct device_if *dev_if = core_if->dev_if;
+	u32 doeptsize0 = 0;
+
+	doeptsize0 = DWC_DEPTSIZ0_SUPCNT_RW(doeptsize0, 3);
+	doeptsize0 = DWC_DEPTSIZ0_PKT_CNT_RW(doeptsize0, 1);
+	doeptsize0 = DWC_DEPTSIZ0_XFER_SIZ_RW(doeptsize0, 8 * 3);
+	dwc_reg_write(dev_if->out_ep_regs[0], DWC_DOEPTSIZ, doeptsize0);
+
+	if (core_if->dma_enable) {
+		u32 doepctl = 0;
+
+		dwc_reg_write(dev_if->out_ep_regs[0], DWC_DOEPDMA,
+			    pcd->setup_pkt_dma_handle);
+		doepctl = DWC_DEPCTL_EPENA_RW(doepctl, 1);
+		doepctl = DWC_DEPCTL_ACT_EP_RW(doepctl, 1);
+		dwc_reg_write(out_ep_ctl_reg(pcd, 0), 0, doepctl);
+	}
+}
+
+/**
+ * This interrupt occurs when a USB Reset is detected.  When the USB Reset
+ * Interrupt occurs the device state is set to DEFAULT and the EP0 state is set
+ * to IDLE.
+ *
+ * Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
+ *
+ * Unmask the following interrupt bits:
+ *  - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
+ *  - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
+ *  - DOEPMSK.SETUP = 1
+ *  - DOEPMSK.XferCompl = 1
+ *  - DIEPMSK.XferCompl = 1
+ *  - DIEPMSK.TimeOut = 1
+ *
+ * Program the following fields in the endpoint specific registers for Control
+ * OUT EP 0, in order to receive a setup packet
+ *  - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back setup packets)
+ *  - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back to back setup
+ *    packets)
+ *
+ *  - In DMA mode, DOEPDMA0 Register with a memory address to store any setup
+ *    packets received
+ *
+ * At this point, all the required initialization, except for enabling
+ * the control 0 OUT endpoint is done, for receiving SETUP packets.
+ *
+ * Note that the bits in the Device IN endpoint mask register (diepmsk) are laid
+ * out exactly the same as the Device IN endpoint interrupt register (diepint.)
+ * Likewise for Device OUT endpoint mask / interrupt registers (doepmsk /
+ * doepint.)
+ */
+static int dwc_otg_pcd_handle_usb_reset_intr(struct dwc_pcd *pcd)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	struct device_if *dev_if = core_if->dev_if;
+	u32 doepctl = 0;
+	u32 daintmsk = 0;
+	u32 doepmsk = 0;
+	u32 diepmsk = 0;
+	u32 dcfg = 0;
+	u32 resetctl = 0;
+	u32 dctl = 0;
+	u32 i;
+	u32 gintsts = 0;
+
+	pr_info("USB RESET\n");
+
+	/* reset the HNP settings */
+	dwc_otg_pcd_update_otg(pcd, 1);
+
+	/* Clear the Remote Wakeup Signalling */
+	dctl = DEC_DCTL_REMOTE_WAKEUP_SIG(dctl, 1);
+	dwc_reg_modify(dev_ctl_reg(pcd), 0, dctl, 0);
+
+	/* Set NAK for all OUT EPs */
+	doepctl = DWC_DEPCTL_SET_NAK_RW(doepctl, 1);
+	for (i = 0; i <= dev_if->num_out_eps; i++)
+		dwc_reg_write(out_ep_ctl_reg(pcd, i), 0, doepctl);
+
+	/* Flush the NP Tx FIFO */
+	dwc_otg_flush_tx_fifo(core_if, 0);
+
+	/* Flush the Learning Queue */
+	resetctl |= DWC_RSTCTL_TKN_QUE_FLUSH;
+	dwc_reg_write(core_if->core_global_regs, DWC_GRSTCTL, resetctl);
+
+	daintmsk |= DWC_DAINT_INEP00;
+	daintmsk |= DWC_DAINT_OUTEP00;
+	dwc_reg_write(dev_if->dev_global_regs, DWC_DAINTMSK, daintmsk);
+
+	doepmsk = DWC_DOEPMSK_SETUP_DONE_RW(doepmsk, 1);
+	doepmsk = DWC_DOEPMSK_AHB_ERROR_RW(doepmsk, 1);
+	doepmsk = DWC_DOEPMSK_EP_DISA_RW(doepmsk, 1);
+	doepmsk = DWC_DOEPMSK_TX_COMPL_RW(doepmsk, 1);
+	dwc_reg_write(dev_if->dev_global_regs, DWC_DOEPMSK, doepmsk);
+
+	diepmsk = DWC_DIEPMSK_TX_CMPL_RW(diepmsk, 1);
+	diepmsk = DWC_DIEPMSK_TOUT_COND_RW(diepmsk, 1);
+	diepmsk = DWC_DIEPMSK_EP_DISA_RW(diepmsk, 1);
+	diepmsk = DWC_DIEPMSK_AHB_ERROR_RW(diepmsk, 1);
+	diepmsk = DWC_DIEPMSK_IN_TKN_TX_EMPTY_RW(diepmsk, 1);
+	dwc_reg_write(dev_if->dev_global_regs, DWC_DIEPMSK, diepmsk);
+
+	/* Reset Device Address */
+	dcfg = dwc_reg_read(dev_if->dev_global_regs, DWC_DCFG);
+	dcfg = DWC_DCFG_DEV_ADDR_WR(dcfg, 0);
+	dwc_reg_write(dev_if->dev_global_regs, DWC_DCFG, dcfg);
+
+	/* setup EP0 to receive SETUP packets */
+	ep0_out_start(core_if, pcd);
+
+	/* Clear interrupt */
+	gintsts = 0;
+	gintsts |= DWC_INTSTS_USB_RST;
+	dwc_reg_write((core_if->core_global_regs), DWC_GINTSTS, gintsts);
+
+	return 1;
+}
+
+/**
+ * Get the device speed from the device status register and convert it
+ * to USB speed constant.
+ */
+static int get_device_speed(struct dwc_pcd *pcd)
+{
+	u32 dsts = 0;
+	enum usb_device_speed speed = USB_SPEED_UNKNOWN;
+
+	dsts = dwc_reg_read(dev_sts_reg(pcd), 0);
+
+	switch (DWC_DSTS_ENUM_SPEED_RD(dsts)) {
+	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
+		speed = USB_SPEED_HIGH;
+		break;
+	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
+	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
+		speed = USB_SPEED_FULL;
+		break;
+	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
+		speed = USB_SPEED_LOW;
+		break;
+	}
+	return speed;
+}
+
+/**
+ * This function enables EP0 OUT to receive SETUP packets and configures EP0
+ * IN for transmitting packets.  It is normally called when the "Enumeration
+ * Done" interrupt occurs.
+ */
+static void dwc_otg_ep0_activate(struct core_if *core_if, struct dwc_ep *ep)
+{
+	struct device_if *dev_if = core_if->dev_if;
+	u32 dsts;
+	u32 diepctl = 0;
+	u32 doepctl = 0;
+	u32 dctl = 0;
+
+	/* Read the Device Status and Endpoint 0 Control registers */
+	dsts = dwc_reg_read(dev_if->dev_global_regs, DWC_DSTS);
+	diepctl = dwc_reg_read(dev_if->in_ep_regs[0], DWC_DIEPCTL);
+	doepctl = dwc_reg_read(dev_if->out_ep_regs[0], DWC_DOEPCTL);
+
+	/* Set the MPS of the IN EP based on the enumeration speed */
+	switch (DWC_DSTS_ENUM_SPEED_RD(dsts)) {
+	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
+	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
+	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
+		diepctl = DWC_DEPCTL_MPS_RW(diepctl, DWC_DEP0CTL_MPS_64);
+		break;
+	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
+		diepctl = DWC_DEPCTL_MPS_RW(diepctl, DWC_DEP0CTL_MPS_8);
+		break;
+	}
+	dwc_reg_write(dev_if->in_ep_regs[0], DWC_DIEPCTL, diepctl);
+
+	/* Enable OUT EP for receive */
+	doepctl = DWC_DEPCTL_EPENA_RW(doepctl, 1);
+	dwc_reg_write(dev_if->out_ep_regs[0], DWC_DOEPCTL, doepctl);
+
+	dctl = DWC_DCTL_CLR_CLBL_NP_IN_NAK(dctl, 1);
+	dwc_reg_modify(dev_if->dev_global_regs, DWC_DCTL, dctl, dctl);
+}
+
+/**
+ * Read the device status register and set the device speed in the
+ * data structure.
+ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
+ */
+static int dwc_otg_pcd_handle_enum_done_intr(struct dwc_pcd *pcd)
+{
+	struct pcd_ep *ep0 = &pcd->ep0;
+	u32 gintsts;
+	u32 gusbcfg;
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	ulong global_regs = core_if->core_global_regs;
+	u32 gsnpsid = global_regs + DWC_GSNPSID;
+	u8 utmi16b, utmi8b;
+
+	if (gsnpsid >= (u32) 0x4f54260a) {
+		utmi16b = 5;
+		utmi8b = 9;
+	} else {
+		utmi16b = 4;
+		utmi8b = 8;
+	}
+	dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
+
+	pcd->ep0state = EP0_IDLE;
+	ep0->stopped = 0;
+	pcd->gadget.speed = get_device_speed(pcd);
+
+	gusbcfg = dwc_reg_read(global_regs, DWC_GUSBCFG);
+
+	/* Set USB turnaround time based on device speed and PHY interface. */
+	if (pcd->gadget.speed == USB_SPEED_HIGH) {
+		switch (DWC_HWCFG2_HS_PHY_TYPE_RD(core_if->hwcfg2)) {
+		case DWC_HWCFG2_HS_PHY_TYPE_ULPI:
+			gusbcfg =
+			    (gusbcfg & (~((u32) DWC_USBCFG_TRN_TIME(0xf)))) |
+			    DWC_USBCFG_TRN_TIME(9);
+			break;
+		case DWC_HWCFG2_HS_PHY_TYPE_UTMI:
+			if (DWC_HWCFG4_UTMI_PHY_DATA_WIDTH_RD(core_if->hwcfg4)
+			    == 0)
+				gusbcfg =
+				    (gusbcfg &
+				     (~((u32) DWC_USBCFG_TRN_TIME(0xf)))) |
+				    DWC_USBCFG_TRN_TIME(utmi8b);
+			else if (DWC_HWCFG4_UTMI_PHY_DATA_WIDTH_RD
+				 (core_if->hwcfg4) == 1)
+				gusbcfg =
+				    (gusbcfg &
+				     (~((u32) DWC_USBCFG_TRN_TIME(0xf)))) |
+				    DWC_USBCFG_TRN_TIME(utmi16b);
+			else if (core_if->core_params->phy_utmi_width == 8)
+				gusbcfg =
+				    (gusbcfg &
+				     (~((u32) DWC_USBCFG_TRN_TIME(0xf)))) |
+				    DWC_USBCFG_TRN_TIME(utmi8b);
+			else
+				gusbcfg =
+				    (gusbcfg &
+				     (~((u32) DWC_USBCFG_TRN_TIME(0xf)))) |
+				    DWC_USBCFG_TRN_TIME(utmi16b);
+			break;
+		case DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI:
+			if (gusbcfg & DWC_USBCFG_ULPI_UTMI_SEL) {
+				gusbcfg =
+				    (gusbcfg &
+				     (~((u32) DWC_USBCFG_TRN_TIME(0xf)))) |
+				    DWC_USBCFG_TRN_TIME(9);
+			} else {
+				if (core_if->core_params->phy_utmi_width == 16)
+					gusbcfg =
+					    (gusbcfg &
+					     (~
+					      ((u32) DWC_USBCFG_TRN_TIME(0xf))))
+					    | DWC_USBCFG_TRN_TIME(utmi16b);
+				else
+					gusbcfg =
+					    (gusbcfg &
+					     (~
+					      ((u32) DWC_USBCFG_TRN_TIME(0xf))))
+					    | DWC_USBCFG_TRN_TIME(utmi8b);
+			}
+			break;
+		}
+	} else {
+		/* Full or low speed */
+		gusbcfg = (gusbcfg & (~((u32) DWC_USBCFG_TRN_TIME(0xf)))) |
+		    DWC_USBCFG_TRN_TIME(9);
+	}
+	dwc_reg_write(global_regs, DWC_GUSBCFG, gusbcfg);
+
+	/* Clear interrupt */
+	gintsts = 0;
+	gintsts |= DWC_INTSTS_ENUM_DONE;
+	dwc_reg_write((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTSTS,
+		    gintsts);
+
+	return 1;
+}
+
+/**
+ * This interrupt indicates that the ISO OUT Packet was dropped due to
+ * Rx FIFO full or Rx Status Queue Full.  If this interrupt occurs
+ * read all the data from the Rx FIFO.
+ */
+static int dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(struct dwc_pcd *pcd)
+{
+	u32 intr_mask = 0;
+	u32 gintsts;
+
+	pr_info("Interrupt Handler not implemented for ISOC Out " "Dropped\n");
+
+	/* Turn off and clear the interrupt */
+	intr_mask |= DWC_INTMSK_ISYNC_OUTPKT_DRP;
+	dwc_reg_modify((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTMSK,
+		     intr_mask, 0);
+
+	gintsts = 0;
+	gintsts |= DWC_INTSTS_ISYNC_OUTPKT_DRP;
+	dwc_reg_write((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTSTS,
+		    gintsts);
+
+	return 1;
+}
+
+/**
+ * This interrupt indicates the end of the portion of the micro-frame
+ * for periodic transactions.  If there is a periodic transaction for
+ * the next frame, load the packets into the EP periodic Tx FIFO.
+ */
+static int dwc_otg_pcd_handle_end_periodic_frame_intr(struct dwc_pcd *pcd)
+{
+	u32 intr_mask = 0;
+	u32 gintsts;
+
+	pr_info("Interrupt handler not implemented for End of "
+		"Periodic Portion of Micro-Frame Interrupt");
+
+	/* Turn off and clear the interrupt */
+	intr_mask |= DWC_INTMSK_END_OF_PFRM;
+	dwc_reg_modify((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTMSK,
+		     intr_mask, 0);
+
+	gintsts = 0;
+	gintsts |= DWC_INTSTS_END_OF_PFRM;
+	dwc_reg_write((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTSTS,
+		    gintsts);
+
+	return 1;
+}
+
+/**
+ * This interrupt indicates that EP of the packet on the top of the
+ * non-periodic Tx FIFO does not match EP of the IN Token received.
+ *
+ * The "Device IN Token Queue" Registers are read to determine the
+ * order the IN Tokens have been received.  The non-periodic Tx FIFO is flushed,
+ * so it can be reloaded in the order seen in the IN Token Queue.
+ */
+static int dwc_otg_pcd_handle_ep_mismatch_intr(struct core_if *core_if)
+{
+	u32 intr_mask = 0;
+	u32 gintsts;
+
+	pr_info("Interrupt handler not implemented for End Point "
+		"Mismatch\n");
+
+	/* Turn off and clear the interrupt */
+	intr_mask |= DWC_INTMSK_ENDP_MIS_MTCH;
+	dwc_reg_modify((core_if->core_global_regs), DWC_GINTMSK,
+		     intr_mask, 0);
+
+	gintsts = 0;
+	gintsts |= DWC_INTSTS_ENDP_MIS_MTCH;
+	dwc_reg_write((core_if->core_global_regs), DWC_GINTSTS, gintsts);
+	return 1;
+}
+
+/**
+ * This funcion stalls EP0.
+ */
+static void ep0_do_stall(struct dwc_pcd *pcd, const int val)
+{
+	struct pcd_ep *ep0 = &pcd->ep0;
+	struct usb_ctrlrequest *ctrl = &pcd->setup_pkt->req;
+
+	pr_warning("req %02x.%02x protocol STALL; err %d\n",
+		   ctrl->bRequestType, ctrl->bRequest, val);
+
+	ep0->dwc_ep.is_in = 1;
+	dwc_otg_ep_set_stall(pcd->otg_dev->core_if, &ep0->dwc_ep);
+
+	pcd->ep0.stopped = 1;
+	pcd->ep0state = EP0_IDLE;
+	ep0_out_start(GET_CORE_IF(pcd), pcd);
+}
+
+/**
+ * This functions delegates the setup command to the gadget driver.
+ */
+static void do_gadget_setup(struct dwc_pcd *pcd, struct usb_ctrlrequest *ctrl)
+{
+	if (pcd->driver && pcd->driver->setup) {
+		int ret;
+
+		spin_unlock(&pcd->lock);
+		ret = pcd->driver->setup(&pcd->gadget, ctrl);
+		spin_lock(&pcd->lock);
+
+		if (ret < 0)
+			ep0_do_stall(pcd, ret);
+
+		/** This is a g_file_storage gadget driver specific
+		 * workaround: a DELAYED_STATUS result from the fsg_setup
+		 * routine will result in the gadget queueing a EP0 IN status
+		 * phase for a two-stage control transfer.
+		 *
+		 * Exactly the same as a SET_CONFIGURATION/SET_INTERFACE except
+		 * that this is a class specific request.  Need a generic way to
+		 * know when the gadget driver will queue the status phase.
+		 *
+		 * Can we assume when we call the gadget driver setup() function
+		 * that it will always queue and require the following flag?
+		 * Need to look into this.
+		 */
+		if (ret == 256 + 999)
+			pcd->request_config = 1;
+	}
+}
+
+/**
+ * This function starts the Zero-Length Packet for the IN status phase
+ * of a 2 stage control transfer.
+ */
+static void do_setup_in_status_phase(struct dwc_pcd *pcd)
+{
+	struct pcd_ep *ep0 = &pcd->ep0;
+
+	if (pcd->ep0state == EP0_STALL)
+		return;
+
+	pcd->ep0state = EP0_STATUS;
+
+	ep0->dwc_ep.xfer_len = 0;
+	ep0->dwc_ep.xfer_count = 0;
+	ep0->dwc_ep.is_in = 1;
+	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
+	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
+
+	/* Prepare for more SETUP Packets */
+	ep0_out_start(GET_CORE_IF(pcd), pcd);
+}
+
+/**
+ * This function starts the Zero-Length Packet for the OUT status phase
+ * of a 2 stage control transfer.
+ */
+static void do_setup_out_status_phase(struct dwc_pcd *pcd)
+{
+	struct pcd_ep *ep0 = &pcd->ep0;
+
+	if (pcd->ep0state == EP0_STALL)
+		return;
+	pcd->ep0state = EP0_STATUS;
+
+	ep0->dwc_ep.xfer_len = 0;
+	ep0->dwc_ep.xfer_count = 0;
+	ep0->dwc_ep.is_in = 0;
+	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
+	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
+
+	/* Prepare for more SETUP Packets */
+	ep0_out_start(GET_CORE_IF(pcd), pcd);
+}
+
+/**
+ * Clear the EP halt (STALL) and if pending requests start the
+ * transfer.
+ */
+static void pcd_clear_halt(struct dwc_pcd *pcd, struct pcd_ep *ep)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+
+	if (!ep->dwc_ep.stall_clear_flag)
+		dwc_otg_ep_clear_stall(core_if, &ep->dwc_ep);
+
+	/* Reactive the EP */
+	dwc_otg_ep_activate(core_if, &ep->dwc_ep);
+
+	if (ep->stopped) {
+		ep->stopped = 0;
+		/* If there is a request in the EP queue start it */
+
+		/*
+		 * dwc_start_next_request(), outside of interrupt context at some
+		 * time after the current time, after a clear-halt setup packet.
+		 * Still need to implement ep mismatch in the future if a gadget
+		 * ever uses more than one endpoint at once
+		 */
+		if (core_if->dma_enable) {
+			ep->queue_sof = 1;
+			tasklet_schedule(pcd->start_xfer_tasklet);
+		} else {
+			/*
+			 * Added-sr: 2007-07-26
+			 *
+			 * To re-enable this endpoint it's important to
+			 * set this next_ep number. Otherwise the endpoint
+			 * will not get active again after stalling.
+			 */
+			if (dwc_has_feature(core_if, DWC_LIMITED_XFER))
+				dwc_start_next_request(ep);
+		}
+	}
+
+	/* Start Control Status Phase */
+	do_setup_in_status_phase(pcd);
+}
+
+/**
+ * This function is called when the SET_FEATURE TEST_MODE Setup packet is sent
+ * from the host.  The Device Control register is written with the Test Mode
+ * bits set to the specified Test Mode.  This is done as a tasklet so that the
+ * "Status" phase of the control transfer completes before transmitting the TEST
+ * packets.
+ *
+ */
+static void do_test_mode(unsigned long data)
+{
+	u32 dctl = 0;
+	struct dwc_pcd *pcd = (struct dwc_pcd *)data;
+	int test_mode = pcd->test_mode;
+
+	dctl = dwc_reg_read(dev_ctl_reg(pcd), 0);
+	switch (test_mode) {
+	case 1:		/* TEST_J */
+		dctl = DWC_DCTL_TST_CTL(dctl, 1);
+		break;
+	case 2:		/* TEST_K */
+		dctl = DWC_DCTL_TST_CTL(dctl, 2);
+		break;
+	case 3:		/* TEST_SE0_NAK */
+		dctl = DWC_DCTL_TST_CTL(dctl, 3);
+		break;
+	case 4:		/* TEST_PACKET */
+		dctl = DWC_DCTL_TST_CTL(dctl, 4);
+		break;
+	case 5:		/* TEST_FORCE_ENABLE */
+		dctl = DWC_DCTL_TST_CTL(dctl, 5);
+		break;
+	}
+	dwc_reg_write(dev_ctl_reg(pcd), 0, dctl);
+}
+
+/**
+ * This function process the SET_FEATURE Setup Commands.
+ */
+static void do_set_feature(struct dwc_pcd *pcd)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	ulong regs = core_if->core_global_regs;
+	struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
+	int otg_cap = core_if->core_params->otg_cap;
+	u32 gotgctl = 0;
+
+	switch (ctrl.bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		switch (__le16_to_cpu(ctrl.wValue)) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			pcd->remote_wakeup_enable = 1;
+			break;
+		case USB_DEVICE_TEST_MODE:
+			/*
+			 * Setup the Test Mode tasklet to do the Test
+			 * Packet generation after the SETUP Status
+			 * phase has completed.
+			 */
+
+			pcd->test_mode_tasklet.next = NULL;
+			pcd->test_mode_tasklet.state = 0;
+			atomic_set(&pcd->test_mode_tasklet.count, 0);
+
+			pcd->test_mode_tasklet.func = do_test_mode;
+			pcd->test_mode_tasklet.data = (unsigned long)pcd;
+			pcd->test_mode = __le16_to_cpu(ctrl.wIndex) >> 8;
+			tasklet_schedule(&pcd->test_mode_tasklet);
+
+			break;
+		case USB_DEVICE_B_HNP_ENABLE:
+			/* dev may initiate HNP */
+			if (otg_cap == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
+				pcd->b_hnp_enable = 1;
+				dwc_otg_pcd_update_otg(pcd, 0);
+				/*
+				 * gotgctl.devhnpen cleared by a
+				 * USB Reset?
+				 */
+				gotgctl |= DWC_GCTL_DEV_HNP_ENA;
+				gotgctl |= DWC_GCTL_HNP_REQ;
+				dwc_reg_write(regs, DWC_GOTGCTL, gotgctl);
+			} else {
+				ep0_do_stall(pcd, -EOPNOTSUPP);
+			}
+			break;
+		case USB_DEVICE_A_HNP_SUPPORT:
+			/* RH port supports HNP */
+			if (otg_cap == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
+				pcd->a_hnp_support = 1;
+				dwc_otg_pcd_update_otg(pcd, 0);
+			} else {
+				ep0_do_stall(pcd, -EOPNOTSUPP);
+			}
+			break;
+		case USB_DEVICE_A_ALT_HNP_SUPPORT:
+			/* other RH port does */
+			if (otg_cap == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
+				pcd->a_alt_hnp_support = 1;
+				dwc_otg_pcd_update_otg(pcd, 0);
+			} else {
+				ep0_do_stall(pcd, -EOPNOTSUPP);
+			}
+			break;
+		}
+		do_setup_in_status_phase(pcd);
+		break;
+	case USB_RECIP_INTERFACE:
+		do_gadget_setup(pcd, &ctrl);
+		break;
+	case USB_RECIP_ENDPOINT:
+		if (__le16_to_cpu(ctrl.wValue) == USB_ENDPOINT_HALT) {
+			struct pcd_ep *ep;
+
+			ep = get_ep_by_addr(pcd, __le16_to_cpu(ctrl.wIndex));
+
+			if (ep == NULL) {
+				ep0_do_stall(pcd, -EOPNOTSUPP);
+				return;
+			}
+
+			ep->stopped = 1;
+			dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
+		}
+		do_setup_in_status_phase(pcd);
+		break;
+	}
+}
+
+/**
+ * This function process the CLEAR_FEATURE Setup Commands.
+ */
+static void do_clear_feature(struct dwc_pcd *pcd)
+{
+	struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
+	struct pcd_ep *ep;
+
+	switch (ctrl.bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		switch (__le16_to_cpu(ctrl.wValue)) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			pcd->remote_wakeup_enable = 0;
+			break;
+		case USB_DEVICE_TEST_MODE:
+			/* Add CLEAR_FEATURE for TEST modes. */
+			break;
+		}
+		do_setup_in_status_phase(pcd);
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = get_ep_by_addr(pcd, __le16_to_cpu(ctrl.wIndex));
+		if (ep == NULL) {
+			ep0_do_stall(pcd, -EOPNOTSUPP);
+			return;
+		}
+
+		pcd_clear_halt(pcd, ep);
+		break;
+	}
+}
+
+/**
+ * This function processes SETUP commands.  In Linux, the USB Command processing
+ * is done in two places - the first being the PCD and the second in the Gadget
+ * Driver (for example, the File-Backed Storage Gadget Driver).
+ *
+ * GET_STATUS: Command is processed as defined in chapter 9 of the USB 2.0
+ * Specification chapter 9
+ *
+ * CLEAR_FEATURE: The Device and Endpoint requests are the ENDPOINT_HALT feature
+ * is procesed, all others the interface requests are ignored.
+ *
+ * SET_FEATURE: The Device and Endpoint requests are processed by the PCD.
+ * Interface requests are passed to the Gadget Driver.
+ *
+ * SET_ADDRESS: PCD, Program the DCFG reg, with device address received
+ *
+ * GET_DESCRIPTOR: Gadget Driver, Return the requested descriptor
+ *
+ * SET_DESCRIPTOR: Gadget Driver, Optional - not implemented by any of the
+ * existing Gadget Drivers.
+ *
+ * SET_CONFIGURATION: Gadget Driver, Disable all EPs and enable EPs for new
+ * configuration.
+ *
+ * GET_CONFIGURATION: Gadget Driver, Return the current configuration
+ *
+ * SET_INTERFACE: Gadget Driver, Disable all EPs and enable EPs for new
+ * configuration.
+ *
+ * GET_INTERFACE: Gadget Driver, Return the current interface.
+ *
+ * SYNC_FRAME:  Display debug message.
+ *
+ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
+ * processed by pcd_setup. Calling the Function Driver's setup function from
+ * pcd_setup processes the gadget SETUP commands.
+ */
+static void pcd_setup(struct dwc_pcd *pcd)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	struct device_if *dev_if = core_if->dev_if;
+	struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
+	struct pcd_ep *ep;
+	struct pcd_ep *ep0 = &pcd->ep0;
+	u16 *status = pcd->status_buf;
+	u32 doeptsize0 = 0;
+
+	doeptsize0 = dwc_reg_read(dev_if->out_ep_regs[0], DWC_DOEPTSIZ);
+
+	/* handle > 1 setup packet , assert error for now */
+	if (core_if->dma_enable && (DWC_DEPTSIZ0_SUPCNT_RD(doeptsize0) < 2))
+		pr_err("\n\n	 CANNOT handle > 1 setup packet in "
+		       "DMA mode\n\n");
+
+	/* Clean up the request queue */
+	request_nuke(ep0);
+	ep0->stopped = 0;
+
+	if (ctrl.bRequestType & USB_DIR_IN) {
+		ep0->dwc_ep.is_in = 1;
+		pcd->ep0state = EP0_IN_DATA_PHASE;
+	} else {
+		ep0->dwc_ep.is_in = 0;
+		pcd->ep0state = EP0_OUT_DATA_PHASE;
+	}
+
+	if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) {
+		/*
+		 * Handle non-standard (class/vendor) requests in the gadget
+		 * driver
+		 */
+		do_gadget_setup(pcd, &ctrl);
+		return;
+	}
+
+	switch (ctrl.bRequest) {
+	case USB_REQ_GET_STATUS:
+		switch (ctrl.bRequestType & USB_RECIP_MASK) {
+		case USB_RECIP_DEVICE:
+			*status = 0x1;	/* Self powered */
+			*status |= pcd->remote_wakeup_enable << 1;
+			break;
+		case USB_RECIP_INTERFACE:
+			*status = 0;
+			break;
+		case USB_RECIP_ENDPOINT:
+			ep = get_ep_by_addr(pcd, __le16_to_cpu(ctrl.wIndex));
+			if (ep == NULL || __le16_to_cpu(ctrl.wLength) > 2) {
+				ep0_do_stall(pcd, -EOPNOTSUPP);
+				return;
+			}
+			*status = ep->stopped;
+			break;
+		}
+
+		*status = __cpu_to_le16(*status);
+
+		pcd->ep0_pending = 1;
+		ep0->dwc_ep.start_xfer_buff = (u8 *) status;
+		ep0->dwc_ep.xfer_buff = (u8 *) status;
+		ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
+		ep0->dwc_ep.xfer_len = 2;
+		ep0->dwc_ep.xfer_count = 0;
+		ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
+		dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		do_clear_feature(pcd);
+		break;
+	case USB_REQ_SET_FEATURE:
+		do_set_feature(pcd);
+		break;
+	case USB_REQ_SET_ADDRESS:
+		if (ctrl.bRequestType == USB_RECIP_DEVICE) {
+			u32 dcfg = 0;
+
+			dcfg = DWC_DCFG_DEV_ADDR_WR(dcfg,
+						    __le16_to_cpu(ctrl.wValue));
+			dwc_reg_modify(dev_if->dev_global_regs, DWC_DCFG,
+				     0, dcfg);
+			do_setup_in_status_phase(pcd);
+			return;
+		}
+		break;
+	case USB_REQ_SET_INTERFACE:
+	case USB_REQ_SET_CONFIGURATION:
+		pcd->request_config = 1;	/* Configuration changed */
+		do_gadget_setup(pcd, &ctrl);
+		break;
+	case USB_REQ_SYNCH_FRAME:
+		do_gadget_setup(pcd, &ctrl);
+		break;
+	default:
+		/* Call the Gadget Driver's setup functions */
+		do_gadget_setup(pcd, &ctrl);
+		break;
+	}
+}
+
+/**
+ * This function completes the ep0 control transfer.
+ */
+static int ep0_complete_request(struct pcd_ep *ep)
+{
+	struct core_if *core_if = GET_CORE_IF(ep->pcd);
+	struct device_if *dev_if = core_if->dev_if;
+	ulong in_regs = dev_if->in_ep_regs[ep->dwc_ep.num];
+	u32 deptsiz = 0;
+	struct pcd_request *req;
+	int is_last = 0;
+	struct dwc_pcd *pcd = ep->pcd;
+
+	if (pcd->ep0_pending && list_empty(&ep->queue)) {
+		if (ep->dwc_ep.is_in)
+			do_setup_out_status_phase(pcd);
+		else
+			do_setup_in_status_phase(pcd);
+
+		pcd->ep0_pending = 0;
+		pcd->ep0state = EP0_STATUS;
+		return 1;
+	}
+
+	if (list_empty(&ep->queue))
+		return 0;
+
+	req = list_entry(ep->queue.next, struct pcd_request, queue);
+
+	if (pcd->ep0state == EP0_STATUS) {
+		is_last = 1;
+	} else if (ep->dwc_ep.is_in) {
+		deptsiz = dwc_reg_read(in_regs, DWC_DIEPTSIZ);
+
+		if (DWC_DEPTSIZ0_XFER_SIZ_RD(deptsiz) == 0) {
+			req->req.actual = ep->dwc_ep.xfer_count;
+			do_setup_out_status_phase(pcd);
+		}
+	} else {
+		/* This is ep0-OUT */
+		req->req.actual = ep->dwc_ep.xfer_count;
+		do_setup_in_status_phase(pcd);
+	}
+
+	/* Complete the request */
+	if (is_last) {
+		request_done(ep, req, 0);
+		ep->dwc_ep.start_xfer_buff = NULL;
+		ep->dwc_ep.xfer_buff = NULL;
+		ep->dwc_ep.xfer_len = 0;
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ * This function completes the request for the EP.  If there are additional
+ * requests for the EP in the queue they will be started.
+ */
+static void complete_ep(struct pcd_ep *ep)
+{
+	struct core_if *core_if = GET_CORE_IF(ep->pcd);
+	struct device_if *dev_if = core_if->dev_if;
+	ulong in_ep_regs = dev_if->in_ep_regs[ep->dwc_ep.num];
+	u32 deptsiz = 0;
+	struct pcd_request *req = NULL;
+	int is_last = 0;
+
+	/* Get any pending requests */
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next, struct pcd_request, queue);
+
+	if (ep->dwc_ep.is_in) {
+		deptsiz = dwc_reg_read(in_ep_regs, DWC_DIEPTSIZ);
+
+		if (core_if->dma_enable && !DWC_DEPTSIZ_XFER_SIZ_RD(deptsiz))
+			ep->dwc_ep.xfer_count = ep->dwc_ep.xfer_len;
+
+		if (DWC_DEPTSIZ_XFER_SIZ_RD(deptsiz) == 0 &&
+		    DWC_DEPTSIZ_PKT_CNT_RD(deptsiz) == 0 &&
+		    ep->dwc_ep.xfer_count == ep->dwc_ep.xfer_len)
+			is_last = 1;
+		else
+			pr_warning("Incomplete transfer (%s-%s "
+				   "[siz=%d pkt=%d])\n", ep->ep.name,
+				   ep->dwc_ep.is_in ? "IN" : "OUT",
+				   DWC_DEPTSIZ_XFER_SIZ_RD(deptsiz),
+				   DWC_DEPTSIZ_PKT_CNT_RD(deptsiz));
+	} else {
+		ulong out_ep_regs = dev_if->out_ep_regs[ep->dwc_ep.num];
+
+		deptsiz = dwc_reg_read(out_ep_regs, DWC_DOEPTSIZ);
+		is_last = 1;
+	}
+
+	/* Complete the request */
+	if (is_last) {
+		/*
+		 * Added-sr: 2007-07-26
+		 *
+		 * Since the 405EZ (Ultra) only support 2047 bytes as
+		 * max transfer size, we have to split up bigger transfers
+		 * into multiple transfers of 1024 bytes sized messages.
+		 * I happens often, that transfers of 4096 bytes are
+		 * required (zero-gadget, file_storage-gadget).
+		 */
+		if ((dwc_has_feature(core_if, DWC_LIMITED_XFER)) &&
+		    ep->dwc_ep.bytes_pending) {
+			ulong in_regs =
+			    core_if->dev_if->in_ep_regs[ep->dwc_ep.num];
+			u32 intr_mask = 0;
+
+			ep->dwc_ep.xfer_len = ep->dwc_ep.bytes_pending;
+			if (ep->dwc_ep.xfer_len > MAX_XFER_LEN) {
+				ep->dwc_ep.bytes_pending = ep->dwc_ep.xfer_len -
+				    MAX_XFER_LEN;
+				ep->dwc_ep.xfer_len = MAX_XFER_LEN;
+			} else {
+				ep->dwc_ep.bytes_pending = 0;
+			}
+
+			/*
+			 * Restart the current transfer with the next "chunk"
+			 * of data.
+			 */
+			ep->dwc_ep.xfer_count = 0;
+
+			deptsiz = dwc_reg_read(in_regs, DWC_DIEPTSIZ);
+			deptsiz =
+			    DWC_DEPTSIZ_XFER_SIZ_RW(deptsiz,
+						    ep->dwc_ep.xfer_len);
+			deptsiz =
+			    DWC_DEPTSIZ_PKT_CNT_RW(deptsiz,
+						   ((ep->dwc_ep.xfer_len - 1 +
+						     ep->dwc_ep.maxpacket) /
+						    ep->dwc_ep.maxpacket));
+			dwc_reg_write(in_regs, DWC_DIEPTSIZ, deptsiz);
+
+			intr_mask |= DWC_INTSTS_NP_TXFIFO_EMPT;
+			dwc_reg_modify((core_if->core_global_regs),
+				     DWC_GINTSTS, intr_mask, 0);
+			dwc_reg_modify((core_if->core_global_regs),
+				     DWC_GINTMSK, intr_mask, intr_mask);
+
+			/*
+			 * Just return here if message was not completely
+			 * transferred.
+			 */
+			return;
+		}
+		if (core_if->dma_enable)
+			req->req.actual = ep->dwc_ep.xfer_len -
+			    DWC_DEPTSIZ_XFER_SIZ_RD(deptsiz);
+		else
+			req->req.actual = ep->dwc_ep.xfer_count;
+
+		request_done(ep, req, 0);
+		ep->dwc_ep.start_xfer_buff = NULL;
+		ep->dwc_ep.xfer_buff = NULL;
+		ep->dwc_ep.xfer_len = 0;
+
+		/* If there is a request in the queue start it. */
+		dwc_start_next_request(ep);
+	}
+}
+
+/**
+ * This function continues control IN transfers started by
+ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
+ * single packet.  NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
+ * bit for the packet count.
+ */
+static void dwc_otg_ep0_continue_transfer(struct core_if *c_if,
+					  struct dwc_ep *ep)
+{
+	if (ep->is_in) {
+		u32 depctl = 0;
+		u32 deptsiz = 0;
+		struct device_if *d_if = c_if->dev_if;
+		ulong in_regs = d_if->in_ep_regs[0];
+		u32 tx_status = 0;
+		ulong glbl_regs = c_if->core_global_regs;
+
+		tx_status = dwc_reg_read(glbl_regs, DWC_GNPTXSTS);
+
+		depctl = dwc_reg_read(in_regs, DWC_DIEPCTL);
+		deptsiz = dwc_reg_read(in_regs, DWC_DIEPTSIZ);
+
+		/*
+		 * Program the transfer size and packet count as follows:
+		 *   xfersize = N * maxpacket + short_packet
+		 *   pktcnt = N + (short_packet exist ? 1 : 0)
+		 */
+		if (ep->total_len - ep->xfer_count > ep->maxpacket)
+			deptsiz = DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz,
+							   ep->maxpacket);
+		else
+			deptsiz = DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz,
+							   (ep->total_len -
+							    ep->xfer_count));
+
+		deptsiz = DWC_DEPTSIZ0_PKT_CNT_RW(deptsiz, 1);
+		ep->xfer_len += DWC_DEPTSIZ0_XFER_SIZ_RD(deptsiz);
+		dwc_reg_write(in_regs, DWC_DIEPTSIZ, deptsiz);
+
+		/* Write the DMA register */
+		if (DWC_HWCFG2_ARCH_RD(c_if->hwcfg2) == DWC_INT_DMA_ARCH)
+			dwc_reg_write(in_regs, DWC_DIEPDMA, ep->dma_addr);
+
+		/* EP enable, IN data in FIFO */
+		depctl = DWC_DEPCTL_CLR_NAK_RW(depctl, 1);
+		depctl = DWC_DEPCTL_EPENA_RW(depctl, 1);
+		dwc_reg_write(in_regs, DWC_DIEPCTL, depctl);
+
+		/*
+		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
+		 * data will be written into the fifo by the ISR.
+		 */
+		if (!c_if->dma_enable) {
+			u32 intr_mask = 0;
+
+			/* First clear it from GINTSTS */
+			intr_mask |= DWC_INTMSK_NP_TXFIFO_EMPT;
+			dwc_reg_write(glbl_regs, DWC_GINTSTS, intr_mask);
+
+			/* To avoid spurious NPTxFEmp intr */
+			dwc_reg_modify(glbl_regs, DWC_GINTMSK, intr_mask,
+				     intr_mask);
+		}
+	}
+}
+
+/**
+ * This function handles EP0 Control transfers.
+ *
+ * The state of the control tranfers are tracked in ep0state
+ */
+static void handle_ep0(struct dwc_pcd *pcd)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	struct pcd_ep *ep0 = &pcd->ep0;
+
+	switch (pcd->ep0state) {
+	case EP0_DISCONNECT:
+		break;
+	case EP0_IDLE:
+		pcd->request_config = 0;
+		pcd_setup(pcd);
+		break;
+	case EP0_IN_DATA_PHASE:
+		if (core_if->dma_enable)
+			/*
+			 * For EP0 we can only program 1 packet at a time so we
+			 * need to do the calculations after each complete.
+			 * Call write_packet to make the calculations, as in
+			 * slave mode, and use those values to determine if we
+			 * can complete.
+			 */
+			dwc_otg_ep_write_packet(core_if, &ep0->dwc_ep, 1);
+		else
+			dwc_otg_ep_write_packet(core_if, &ep0->dwc_ep, 0);
+
+		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len)
+			dwc_otg_ep0_continue_transfer(core_if, &ep0->dwc_ep);
+		else
+			ep0_complete_request(ep0);
+		break;
+	case EP0_OUT_DATA_PHASE:
+		ep0_complete_request(ep0);
+		break;
+	case EP0_STATUS:
+		ep0_complete_request(ep0);
+		pcd->ep0state = EP0_IDLE;
+		ep0->stopped = 1;
+		ep0->dwc_ep.is_in = 0;	/* OUT for next SETUP */
+
+		/* Prepare for more SETUP Packets */
+		if (core_if->dma_enable) {
+			ep0_out_start(core_if, pcd);
+		} else {
+			int i;
+			u32 diepctl = 0;
+
+			diepctl = dwc_reg_read(in_ep_ctl_reg(pcd, 0), 0);
+			if (pcd->ep0.queue_sof) {
+				pcd->ep0.queue_sof = 0;
+				dwc_start_next_request(&pcd->ep0);
+			}
+
+			diepctl = dwc_reg_read(in_ep_ctl_reg(pcd, 0), 0);
+			if (pcd->ep0.queue_sof) {
+				pcd->ep0.queue_sof = 0;
+				dwc_start_next_request(&pcd->ep0);
+			}
+
+			for (i = 0; i < core_if->dev_if->num_in_eps; i++) {
+				diepctl = dwc_reg_read(in_ep_ctl_reg(pcd, i), 0);
+
+				if (pcd->in_ep[i].queue_sof) {
+					pcd->in_ep[i].queue_sof = 0;
+					dwc_start_next_request(&pcd->in_ep[i]);
+				}
+			}
+		}
+		break;
+	case EP0_STALL:
+		pr_err("EP0 STALLed, should not get here handle_ep0()\n");
+		break;
+	}
+}
+
+/**
+ * Restart transfer
+ */
+static void restart_transfer(struct dwc_pcd *pcd, const u32 ep_num)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	struct device_if *dev_if = core_if->dev_if;
+	u32 dieptsiz = 0;
+	struct pcd_ep *ep;
+
+	dieptsiz = dwc_reg_read(dev_if->in_ep_regs[ep_num], DWC_DIEPTSIZ);
+	ep = get_in_ep(pcd, ep_num);
+
+	/*
+	 * If pktcnt is not 0, and xfersize is 0, and there is a buffer,
+	 * resend the last packet.
+	 */
+	if (DWC_DEPTSIZ_PKT_CNT_RD(dieptsiz) &&
+	    !DWC_DEPTSIZ_XFER_SIZ_RD(dieptsiz) && ep->dwc_ep.start_xfer_buff) {
+		if (ep->dwc_ep.xfer_len <= ep->dwc_ep.maxpacket) {
+			ep->dwc_ep.xfer_count = 0;
+			ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
+		} else {
+			ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
+
+			/* convert packet size to dwords. */
+			ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
+		}
+		ep->stopped = 0;
+
+		if (!ep_num)
+			dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
+		else
+			dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
+	}
+}
+
+/**
+ * Handle the IN EP Transfer Complete interrupt.
+ *
+ * If dedicated fifos are enabled, then the Tx FIFO empty interrupt for the EP
+ * is disabled.  Otherwise the NP Tx FIFO empty interrupt is  disabled.
+ */
+static void handle_in_ep_xfr_complete_intr(struct dwc_pcd *pcd,
+					   struct pcd_ep *ep, u32 num)
+{
+	struct core_if *c_if = GET_CORE_IF(pcd);
+	struct device_if *d_if = c_if->dev_if;
+	struct dwc_ep *dwc_ep = &ep->dwc_ep;
+	u32 diepint = 0;
+
+	if (c_if->en_multiple_tx_fifo) {
+		u32 fifoemptymsk = 0x1 << dwc_ep->num;
+		dwc_reg_modify(d_if->dev_global_regs,
+			     DWC_DTKNQR4FIFOEMPTYMSK, fifoemptymsk, 0);
+	} else {
+		u32 intr_mask = 0;
+
+		intr_mask |= DWC_INTMSK_NP_TXFIFO_EMPT;
+		dwc_reg_modify((c_if->core_global_regs), DWC_GINTMSK,
+			     intr_mask, 0);
+	}
+
+	/* Clear the interrupt, then complete the transfer */
+	diepint = DWC_DIEPINT_TX_CMPL_RW(diepint, 1);
+	dwc_reg_write(d_if->in_ep_regs[num], DWC_DIEPINT, diepint);
+
+	if (!num)
+		handle_ep0(pcd);
+	else
+		complete_ep(ep);
+}
+
+/**
+ * Handle the IN EP disable interrupt.
+ */
+static void handle_in_ep_disable_intr(struct dwc_pcd *pcd, const u32 ep_num)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	struct device_if *dev_if = core_if->dev_if;
+	u32 dieptsiz = 0;
+	u32 dctl = 0;
+	struct pcd_ep *ep;
+	struct dwc_ep *dwc_ep;
+	u32 diepint = 0;
+
+	ep = get_in_ep(pcd, ep_num);
+	dwc_ep = &ep->dwc_ep;
+
+	dieptsiz = dwc_reg_read(dev_if->in_ep_regs[ep_num], DWC_DIEPTSIZ);
+
+	if (ep->stopped) {
+		/* Flush the Tx FIFO */
+		dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
+
+		/* Clear the Global IN NP NAK */
+		dctl = 0;
+		dctl = DWC_DCTL_CLR_CLBL_NP_IN_NAK(dctl, 1);
+		dwc_reg_modify(dev_ctl_reg(pcd), 0, dctl, 0);
+
+		if (DWC_DEPTSIZ_PKT_CNT_RD(dieptsiz) ||
+		    DWC_DEPTSIZ_XFER_SIZ_RD(dieptsiz))
+			restart_transfer(pcd, ep_num);
+	} else {
+		if (DWC_DEPTSIZ_PKT_CNT_RD(dieptsiz) ||
+		    DWC_DEPTSIZ_XFER_SIZ_RD(dieptsiz))
+			restart_transfer(pcd, ep_num);
+	}
+	/* Clear epdisabled */
+	diepint = DWC_DIEPINT_EP_DISA_RW(diepint, 1);
+	dwc_reg_write(in_ep_int_reg(pcd, ep_num), 0, diepint);
+
+}
+
+/**
+ * Handler for the IN EP timeout handshake interrupt.
+ */
+static void handle_in_ep_timeout_intr(struct dwc_pcd *pcd, const u32 ep_num)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	struct pcd_ep *ep;
+	u32 dctl = 0;
+	u32 intr_mask = 0;
+	u32 diepint = 0;
+
+	ep = get_in_ep(pcd, ep_num);
+
+	/* Disable the NP Tx Fifo Empty Interrrupt */
+	if (!core_if->dma_enable) {
+		intr_mask |= DWC_INTMSK_NP_TXFIFO_EMPT;
+		dwc_reg_modify((core_if->core_global_regs), DWC_GINTMSK,
+			     intr_mask, 0);
+	}
+
+	/* Non-periodic EP */
+	/* Enable the Global IN NAK Effective Interrupt */
+	intr_mask |= DWC_INTMSK_GLBL_IN_NAK;
+	dwc_reg_modify((core_if->core_global_regs), DWC_GINTMSK, 0,
+		     intr_mask);
+
+	/* Set Global IN NAK */
+	dctl = DWC_DCTL_CLR_CLBL_NP_IN_NAK(dctl, 1);
+	dwc_reg_modify(dev_ctl_reg(pcd), 0, dctl, dctl);
+	ep->stopped = 1;
+
+	/* Clear timeout */
+	diepint = DWC_DIEPINT_TOUT_COND_RW(diepint, 1);
+	dwc_reg_write(in_ep_int_reg(pcd, ep_num), 0, diepint);
+}
+
+/**
+ * Handles the IN Token received with TxF Empty interrupt.
+ *
+ * For the 405EZ, only start the next transfer, when currently no other transfer
+ * is active on this endpoint.
+ *
+ * Note that the bits in the Device IN endpoint mask register are laid out
+ * exactly the same as the Device IN endpoint interrupt register.
+ */
+static void handle_in_ep_tx_fifo_empty_intr(struct dwc_pcd *pcd,
+					    struct pcd_ep *ep, u32 num)
+{
+	u32 diepint = 0;
+
+	if (!ep->stopped && num) {
+		u32 diepmsk = 0;
+
+		diepmsk = DWC_DIEPMSK_IN_TKN_TX_EMPTY_RW(diepmsk, 1);
+		dwc_reg_modify(dev_diepmsk_reg(pcd), 0, diepmsk, 0);
+
+		if (dwc_has_feature(GET_CORE_IF(pcd), DWC_LIMITED_XFER)) {
+			if (!ep->dwc_ep.active)
+				dwc_start_next_request(ep);
+		} else {
+			dwc_start_next_request(ep);
+		}
+	}
+	/* Clear intktxfemp */
+	diepint = DWC_DIEPMSK_IN_TKN_TX_EMPTY_RW(diepint, 1);
+	dwc_reg_write(in_ep_int_reg(pcd, num), 0, diepint);
+}
+
+static void handle_in_ep_nak_effective_intr(struct dwc_pcd *pcd,
+					    struct pcd_ep *ep, u32 num)
+{
+	u32 diepctl = 0;
+	u32 diepint = 0;
+
+	/* Periodic EP */
+	if (ep->disabling) {
+		diepctl = 0;
+		diepctl = DWC_DEPCTL_SET_NAK_RW(diepctl, 1);
+		diepctl = DWC_DEPCTL_DPID_RW(diepctl, 1);
+		dwc_reg_modify(in_ep_ctl_reg(pcd, num), 0, diepctl, diepctl);
+	}
+	/* Clear inepnakeff */
+	diepint = DWC_DIEPINT_IN_EP_NAK_RW(diepint, 1);
+	dwc_reg_write(in_ep_int_reg(pcd, num), 0, diepint);
+
+}
+
+/**
+ * This function returns the Device IN EP Interrupt register
+ */
+static inline u32 dwc_otg_read_diep_intr(struct core_if *core_if,
+					 struct dwc_ep *ep)
+{
+	struct device_if *dev_if = core_if->dev_if;
+	u32 v, msk, emp;
+
+	msk = dwc_reg_read(dev_if->dev_global_regs, DWC_DIEPMSK);
+	emp =
+	    dwc_reg_read(dev_if->dev_global_regs, DWC_DTKNQR4FIFOEMPTYMSK);
+	msk |= ((emp >> ep->num) & 0x1) << 7;
+	v = dwc_reg_read(dev_if->in_ep_regs[ep->num], DWC_DIEPINT) & msk;
+	return v;
+}
+
+/**
+ * This function reads the Device All Endpoints Interrupt register and
+ * returns the IN endpoint interrupt bits.
+ */
+static inline u32 dwc_otg_read_dev_all_in_ep_intr(struct core_if *_if)
+{
+	u32 v;
+
+	v = dwc_reg_read(_if->dev_if->dev_global_regs, DWC_DAINT) &
+	    dwc_reg_read(_if->dev_if->dev_global_regs, DWC_DAINTMSK);
+	return v & 0xffff;
+}
+
+/**
+ * This interrupt indicates that an IN EP has a pending Interrupt.
+ * The sequence for handling the IN EP interrupt is shown below:
+ *
+ * - Read the Device All Endpoint Interrupt register
+ * - Repeat the following for each IN EP interrupt bit set (from LSB to MSB).
+ *
+ * - Read the Device Endpoint Interrupt (DIEPINTn) register
+ * - If "Transfer Complete" call the request complete function
+ * - If "Endpoint Disabled" complete the EP disable procedure.
+ * - If "AHB Error Interrupt" log error
+ * - If "Time-out Handshake" log error
+ * - If "IN Token Received when TxFIFO Empty" write packet to Tx FIFO.
+ * - If "IN Token EP Mismatch" (disable, this is handled by EP Mismatch
+ *   Interrupt)
+ */
+static int dwc_otg_pcd_handle_in_ep_intr(struct dwc_pcd *pcd)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	u32 diepint = 0;
+	u32 ep_intr;
+	u32 epnum = 0;
+	struct pcd_ep *ep;
+	struct dwc_ep *dwc_ep;
+
+	/* Read in the device interrupt bits */
+	ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
+
+	/* Service the Device IN interrupts for each endpoint */
+	while (ep_intr) {
+		if (ep_intr & 0x1) {
+			u32 c_diepint;
+
+			/* Get EP pointer */
+			ep = get_in_ep(pcd, epnum);
+			dwc_ep = &ep->dwc_ep;
+
+			diepint = dwc_otg_read_diep_intr(core_if, dwc_ep);
+
+			/* Transfer complete */
+			if (DWC_DIEPINT_TX_CMPL_RD(diepint))
+				handle_in_ep_xfr_complete_intr(pcd, ep, epnum);
+
+			/* Endpoint disable */
+			if (DWC_DIEPINT_EP_DISA_RD(diepint))
+				handle_in_ep_disable_intr(pcd, epnum);
+
+			/* AHB Error */
+			if (DWC_DIEPINT_AHB_ERROR_RD(diepint)) {
+				/* Clear ahberr */
+				c_diepint = 0;
+				c_diepint =
+				    DWC_DIEPINT_AHB_ERROR_RW(c_diepint, 1);
+				dwc_reg_write(in_ep_int_reg(pcd, epnum), 0,
+					    c_diepint);
+			}
+
+			/* TimeOUT Handshake (non-ISOC IN EPs) */
+			if (DWC_DIEPINT_TOUT_COND_RD(diepint))
+				handle_in_ep_timeout_intr(pcd, epnum);
+
+			/* IN Token received with TxF Empty */
+			if (DWC_DIEPINT_IN_TKN_TX_EMPTY_RD(diepint))
+				handle_in_ep_tx_fifo_empty_intr(pcd, ep, epnum);
+
+			/* IN Token Received with EP mismatch */
+			if (DWC_DIEPINT_IN_TKN_EP_MISS_RD(diepint)) {
+				/* Clear intknepmis */
+				c_diepint = 0;
+				c_diepint =
+				    DWC_DIEPINT_IN_TKN_EP_MISS_RW(c_diepint, 1);
+				dwc_reg_write(in_ep_int_reg(pcd, epnum), 0,
+					    c_diepint);
+			}
+
+			/* IN Endpoint NAK Effective */
+			if (DWC_DIEPINT_IN_EP_NAK_RD(diepint))
+				handle_in_ep_nak_effective_intr(pcd, ep, epnum);
+
+			/* IN EP Tx FIFO Empty Intr */
+			if (DWC_DIEPINT_TXFIFO_EMPTY_RD(diepint))
+				write_empty_tx_fifo(pcd, epnum);
+		}
+		epnum++;
+		ep_intr >>= 1;
+	}
+	return 1;
+}
+
+/**
+ * This function reads the Device All Endpoints Interrupt register and
+ * returns the OUT endpoint interrupt bits.
+ */
+static inline u32 dwc_otg_read_dev_all_out_ep_intr(struct core_if *_if)
+{
+	u32 v;
+
+	v = dwc_reg_read(_if->dev_if->dev_global_regs, DWC_DAINT) &
+	    dwc_reg_read(_if->dev_if->dev_global_regs, DWC_DAINTMSK);
+	return (v & 0xffff0000) >> 16;
+}
+
+/**
+ * This function returns the Device OUT EP Interrupt register
+ */
+static inline u32 dwc_otg_read_doep_intr(struct core_if *core_if,
+					 struct dwc_ep *ep)
+{
+	struct device_if *dev_if = core_if->dev_if;
+	u32 v;
+
+	v = dwc_reg_read(dev_if->out_ep_regs[ep->num], DWC_DOEPINT) &
+	    dwc_reg_read(dev_if->dev_global_regs, DWC_DOEPMSK);
+	return v;
+}
+
+/**
+ * This interrupt indicates that an OUT EP has a pending Interrupt.
+ * The sequence for handling the OUT EP interrupt is shown below:
+ *
+ * - Read the Device All Endpoint Interrupt register.
+ * - Repeat the following for each OUT EP interrupt bit set (from LSB to MSB).
+ *
+ * - Read the Device Endpoint Interrupt (DOEPINTn) register
+ * - If "Transfer Complete" call the request complete function
+ * - If "Endpoint Disabled" complete the EP disable procedure.
+ * - If "AHB Error Interrupt" log error
+ * - If "Setup Phase Done" process Setup Packet (See Standard USB Command
+ *   Processing)
+ */
+static int dwc_otg_pcd_handle_out_ep_intr(struct dwc_pcd *pcd)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	u32 ep_intr;
+	u32 doepint = 0;
+	u32 epnum = 0;
+	struct dwc_ep *dwc_ep;
+
+	/* Read in the device interrupt bits */
+	ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
+	while (ep_intr) {
+		if (ep_intr & 0x1) {
+			u32 c_doepint = 0;
+
+			dwc_ep = &((get_out_ep(pcd, epnum))->dwc_ep);
+			doepint = dwc_otg_read_doep_intr(core_if, dwc_ep);
+
+			/* Transfer complete */
+			if (DWC_DOEPINT_TX_COMPL_RD(doepint)) {
+				/* Clear xfercompl */
+				c_doepint = 0;
+				c_doepint =
+				    DWC_DOEPMSK_TX_COMPL_RW(c_doepint, 1);
+				dwc_reg_write(out_ep_int_reg(pcd, epnum), 0,
+					    c_doepint);
+				if (epnum == 0)
+					handle_ep0(pcd);
+				else
+					complete_ep(get_out_ep(pcd, epnum));
+			}
+
+			/* Endpoint disable */
+			if (DWC_DOEPINT_EP_DISA_RD(doepint)) {
+				/* Clear epdisabled */
+				c_doepint = 0;
+				c_doepint =
+				    DWC_DOEPMSK_EP_DISA_RW(c_doepint, 1);
+				dwc_reg_write(out_ep_int_reg(pcd, epnum), 0,
+					    c_doepint);
+			}
+
+			/* AHB Error */
+			if (DWC_DOEPINT_AHB_ERROR_RD(doepint)) {
+				c_doepint = 0;
+				c_doepint =
+				    DWC_DOEPMSK_AHB_ERROR_RW(c_doepint, 1);
+				dwc_reg_write(out_ep_int_reg(pcd, epnum), 0,
+					    c_doepint);
+			}
+
+			/* Setup Phase Done (control EPs) */
+			if (DWC_DOEPINT_SETUP_DONE_RD(doepint)) {
+				c_doepint = 0;
+				c_doepint =
+				    DWC_DOEPMSK_SETUP_DONE_RW(c_doepint, 1);
+				dwc_reg_write(out_ep_int_reg(pcd, epnum), 0,
+					    c_doepint);
+				handle_ep0(pcd);
+			}
+		}
+		epnum++;
+		ep_intr >>= 1;
+	}
+	return 1;
+}
+
+/**
+ * Incomplete ISO IN Transfer Interrupt.  This interrupt indicates one of the
+ * following conditions occurred while transmitting an ISOC transaction.
+ *
+ * - Corrupted IN Token for ISOC EP.
+ * - Packet not complete in FIFO.
+ *
+ * The follow actions should be taken:
+ * - Determine the EP
+ * - Set incomplete flag in dwc_ep structure
+ *  - Disable EP.  When "Endpoint Disabled" interrupt is received Flush FIFO
+ */
+static int dwc_otg_pcd_handle_incomplete_isoc_in_intr(struct dwc_pcd *pcd)
+{
+	u32 intr_mask = 0;
+	u32 gintsts = 0;
+
+	pr_info("Interrupt handler not implemented for IN ISOC "
+		"Incomplete\n");
+
+	/* Turn off and clear the interrupt */
+	intr_mask |= DWC_INTMSK_INCMP_IN_ATX;
+	dwc_reg_modify((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTMSK,
+		     intr_mask, 0);
+
+	gintsts |= DWC_INTSTS_INCMP_IN_ATX;
+	dwc_reg_write((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTSTS,
+		    gintsts);
+	return 1;
+}
+
+/**
+ * Incomplete ISO OUT Transfer Interrupt.  This interrupt indicates that the
+ * core has dropped an ISO OUT packet.  The following conditions can be the
+ * cause:
+ *
+ * - FIFO Full, the entire packet would not fit in the FIFO.
+ * - CRC Error
+ * - Corrupted Token
+ *
+ * The follow actions should be taken:
+ * - Determine the EP
+ * - Set incomplete flag in dwc_ep structure
+ * - Read any data from the FIFO
+ * - Disable EP.  When "Endpoint Disabled" interrupt is received re-enable EP.
+ */
+static int dwc_otg_pcd_handle_incomplete_isoc_out_intr(struct dwc_pcd *pcd)
+{
+	u32 intr_mask = 0;
+	u32 gintsts = 0;
+
+	pr_info("Interrupt handler not implemented for OUT ISOC "
+		"Incomplete\n");
+
+	/* Turn off and clear the interrupt */
+	intr_mask |= DWC_INTMSK_INCMP_OUT_PTX;
+	dwc_reg_modify((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTMSK,
+		     intr_mask, 0);
+
+	gintsts |= DWC_INTSTS_INCMP_OUT_PTX;
+	dwc_reg_write((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTSTS,
+		    gintsts);
+	return 1;
+}
+
+/**
+ * This function handles the Global IN NAK Effective interrupt.
+ */
+static int dwc_otg_pcd_handle_in_nak_effective(struct dwc_pcd *pcd)
+{
+	struct device_if *dev_if = GET_CORE_IF(pcd)->dev_if;
+	u32 diepctl = 0;
+	u32 diepctl_rd = 0;
+	u32 intr_mask = 0;
+	u32 gintsts = 0;
+	u32 i;
+
+	/* Disable all active IN EPs */
+	diepctl = DWC_DEPCTL_DPID_RW(diepctl, 1);
+	diepctl = DWC_DEPCTL_SET_NAK_RW(diepctl, 1);
+	for (i = 0; i <= dev_if->num_in_eps; i++) {
+		diepctl_rd = dwc_reg_read(in_ep_ctl_reg(pcd, i), 0);
+		if (DWC_DEPCTL_EPENA_RD(diepctl_rd))
+			dwc_reg_write(in_ep_ctl_reg(pcd, i), 0, diepctl);
+	}
+
+	/* Disable the Global IN NAK Effective Interrupt */
+	intr_mask |= DWC_INTMSK_GLBL_IN_NAK;
+	dwc_reg_modify((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTMSK,
+		     intr_mask, 0);
+
+	/* Clear interrupt */
+	gintsts |= DWC_INTSTS_GLBL_IN_NAK;
+	dwc_reg_write((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTSTS,
+		    gintsts);
+	return 1;
+}
+
+/**
+ * This function handles the Global OUT NAK Effective interrupt.
+ */
+static int dwc_otg_pcd_handle_out_nak_effective(struct dwc_pcd *pcd)
+{
+	u32 intr_mask = 0;
+	u32 gintsts = 0;
+
+	pr_info("Interrupt handler not implemented for Global IN "
+		"NAK Effective\n");
+
+	/* Turn off and clear the interrupt */
+	intr_mask |= DWC_INTMSK_GLBL_OUT_NAK;
+	dwc_reg_modify((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTMSK,
+		     intr_mask, 0);
+
+	/* Clear goutnakeff */
+	gintsts |= DWC_INTSTS_GLBL_OUT_NAK;
+	dwc_reg_write((GET_CORE_IF(pcd)->core_global_regs), DWC_GINTSTS,
+		    gintsts);
+	return 1;
+}
+
+/**
+ * PCD interrupt handler.
+ *
+ * The PCD handles the device interrupts.  Many conditions can cause a
+ * device interrupt. When an interrupt occurs, the device interrupt
+ * service routine determines the cause of the interrupt and
+ * dispatches handling to the appropriate function. These interrupt
+ * handling functions are described below.
+ *
+ * All interrupt registers are processed from LSB to MSB.
+ *
+ */
+int dwc_otg_pcd_handle_intr(struct dwc_pcd *pcd)
+{
+	struct core_if *core_if = GET_CORE_IF(pcd);
+	u32 gintr_status;
+	int ret = 0;
+
+	if (dwc_otg_is_device_mode(core_if)) {
+		spin_lock(&pcd->lock);
+
+		gintr_status = dwc_otg_read_core_intr(core_if);
+		if (!gintr_status) {
+			spin_unlock(&pcd->lock);
+			return 0;
+		}
+
+		if (gintr_status & DWC_INTSTS_STRT_OF_FRM)
+			ret |= dwc_otg_pcd_handle_sof_intr(pcd);
+		if (gintr_status & DWC_INTSTS_RXFIFO_NOT_EMPT)
+			ret |= dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
+		if (gintr_status & DWC_INTSTS_NP_TXFIFO_EMPT)
+			ret |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
+		if (gintr_status & DWC_INTSTS_GLBL_IN_NAK)
+			ret |= dwc_otg_pcd_handle_in_nak_effective(pcd);
+		if (gintr_status & DWC_INTSTS_GLBL_OUT_NAK)
+			ret |= dwc_otg_pcd_handle_out_nak_effective(pcd);
+		if (gintr_status & DWC_INTSTS_I2C_INTR)
+			ret |= dwc_otg_pcd_handle_i2c_intr(pcd);
+		if (gintr_status & DWC_INTSTS_EARLY_SUSP)
+			ret |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
+		if (gintr_status & DWC_INTSTS_USB_RST)
+			ret |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
+		if (gintr_status & DWC_INTSTS_ENUM_DONE)
+			ret |= dwc_otg_pcd_handle_enum_done_intr(pcd);
+		if (gintr_status & DWC_INTSTS_ISYNC_OUTPKT_DRP)
+			ret |=
+			    dwc_otg_pcd_handle_isoc_out_packet_dropped_intr
+			    (pcd);
+		if (gintr_status & DWC_INTSTS_END_OF_PFRM)
+			ret |= dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
+		if (gintr_status & DWC_INTSTS_ENDP_MIS_MTCH)
+			ret |= dwc_otg_pcd_handle_ep_mismatch_intr(core_if);
+		if (gintr_status & DWC_INTSTS_IN_ENDP)
+			ret |= dwc_otg_pcd_handle_in_ep_intr(pcd);
+		if (gintr_status & DWC_INTSTS_OUT_ENDP)
+			ret |= dwc_otg_pcd_handle_out_ep_intr(pcd);
+		if (gintr_status & DWC_INTSTS_INCMP_IN_ATX)
+			ret |= dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
+		if (gintr_status & DWC_INTSTS_INCMP_OUT_PTX)
+			ret |= dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
+
+		spin_unlock(&pcd->lock);
+	}
+	return ret;
+}