[U-Boot,v3,103/108] x86: apollolake: Add SPL/TPL init
diff mbox series

Message ID 20191021033913.220758-98-sjg@chromium.org
State New
Delegated to: Bin Meng
Headers show
Series
  • x86: Add initial support for apollolake
Related show

Commit Message

Simon Glass Oct. 21, 2019, 3:39 a.m. UTC
Add code to init the system both in TPL and SPL. Each phase has its own
procedure.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v3:
- Adjust fast_spi_cache_bios_region() to avoid using SPI driver
- Drop calls to x86_cpu_init_f(), x86_cpu_reinit_f()
- Fix build error when debug UART is disabled
- Init the p2sb before the northbridge since the latter so it can use GPIOs
- Move location of fast_spi.h header file
- Shorten log_msg_ret() calls since the function name is always printed
- Support TPL without CONFIG_TPL_SPI_SUPPORT (reduces code size)

Changes in v2: None

 arch/x86/cpu/apollolake/Makefile  |   1 +
 arch/x86/cpu/apollolake/cpu_spl.c | 278 ++++++++++++++++++++++++++++++
 2 files changed, 279 insertions(+)
 create mode 100644 arch/x86/cpu/apollolake/cpu_spl.c

Patch
diff mbox series

diff --git a/arch/x86/cpu/apollolake/Makefile b/arch/x86/cpu/apollolake/Makefile
index ee7114b40c9..65c17d4b779 100644
--- a/arch/x86/cpu/apollolake/Makefile
+++ b/arch/x86/cpu/apollolake/Makefile
@@ -2,6 +2,7 @@ 
 #
 # Copyright (c) 2016 Google, Inc
 
+obj-$(CONFIG_SPL_BUILD) += cpu_spl.o
 obj-$(CONFIG_SPL_BUILD) += spl.o
 obj-$(CONFIG_SPL_BUILD) += systemagent.o
 
diff --git a/arch/x86/cpu/apollolake/cpu_spl.c b/arch/x86/cpu/apollolake/cpu_spl.c
new file mode 100644
index 00000000000..fc9b5eb4f64
--- /dev/null
+++ b/arch/x86/cpu/apollolake/cpu_spl.c
@@ -0,0 +1,278 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Portions taken from coreboot
+ */
+
+#include <common.h>
+#include <acpi_s3.h>
+#include <dm.h>
+#include <ec_commands.h>
+#include <log.h>
+#include <spi_flash.h>
+#include <spl.h>
+#include <syscon.h>
+#include <asm/cpu.h>
+#include <asm/cpu_common.h>
+#include <asm/cpu_x86.h>
+#include <asm/fast_spi.h>
+#include <asm/intel_regs.h>
+#include <asm/io.h>
+#include <asm/msr.h>
+#include <asm/mtrr.h>
+#include <asm/pci.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/gpio_apl.h>
+#include <asm/arch/gpio_defs.h>
+#include <asm/arch/iomap.h>
+#include <asm/arch/lpc.h>
+#include <asm/arch/pch.h>
+#include <asm/arch/systemagent.h>
+#include <asm/arch/uart.h>
+#include <asm/fsp2/fsp_api.h>
+#include <power/acpi_pmc.h>
+
+/* Define this here to avoid referencing any drivers for the debug UART 1 */
+#define PCH_DEV_P2SB	PCI_BDF(0, 0x0d, 0)
+
+static void pch_uart_init(void)
+{
+	/*
+	 * Set up the pinmux so that the UART rx/tx signals are connected
+	 * outside the SoC.
+	 *
+	 * There are about 500 lines of code required to program the GPIO
+	 * configuration for the UARTs. But it boils down to four writes, and
+	 * for the debug UART we want the minimum possible amount of code before
+	 * the UART is running. So just add the magic writes here. See
+	 * apl_gpio_early_init() for the full horror.
+	 */
+	if (PCI_FUNC(PCH_DEV_UART) == 1) {
+		writel(0x40000402, 0xd0c50650);
+		writel(0x3c47, 0xd0c50654);
+		writel(0x40000400, 0xd0c50658);
+		writel(0x3c48, 0xd0c5065c);
+	} else { /* UART2 */
+		writel(0x40000402, 0xd0c50670);
+		writel(0x3c4b, 0xd0c50674);
+		writel(0x40000400, 0xd0c50678);
+		writel(0x3c4c, 0xd0c5067c);
+	}
+
+#ifdef CONFIG_DEBUG_UART
+	apl_uart_init(PCH_DEV_UART, CONFIG_DEBUG_UART_BASE);
+#endif
+}
+
+static void p2sb_enable_bar(ulong bar)
+{
+	/* Enable PCR Base address in PCH */
+	pci_x86_write_config(PCH_DEV_P2SB, PCI_BASE_ADDRESS_0, bar,
+			     PCI_SIZE_32);
+	pci_x86_write_config(PCH_DEV_P2SB, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32);
+
+	/* Enable P2SB MSE */
+	pci_x86_write_config(PCH_DEV_P2SB, PCI_COMMAND,
+			     PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY,
+			     PCI_SIZE_8);
+}
+
+/*
+ * init_for_uart() - Init the debug UART ready for use
+ *
+ * This is the minimum init needed to get the UART running. It avoids any
+ * drivers or complex code, so that the UART is running as soon as possible.
+ */
+static void init_for_uart(void)
+{
+	p2sb_enable_bar(IOMAP_P2SB_BAR);
+	pch_uart_init();
+}
+
+static int fast_spi_cache_bios_region(void)
+{
+	uint map_size, offset;
+	ulong map_base, base;
+	int ret;
+
+	ret = fast_spi_early_init(PCH_DEV_SPI, IOMAP_SPI_BASE);
+	if (ret)
+		return log_msg_ret("early_init", ret);
+
+	ret = fast_spi_get_bios_mmap(PCH_DEV_SPI, &map_base, &map_size,
+				     &offset);
+	if (ret)
+		return log_msg_ret("get_mmap", ret);
+
+	base = (4ULL << 30) - map_size;
+	mtrr_set_next_var(MTRR_TYPE_WRPROT, base, map_size);
+	log_debug("BIOS cache base=%lx, size=%x\n", base, (uint)map_size);
+
+	return 0;
+}
+
+static void enable_pm_timer_emulation(struct udevice *pmc)
+{
+	struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(pmc);
+	msr_t msr;
+
+	/*
+	 * The derived frequency is calculated as follows:
+	 *    (CTC_FREQ * msr[63:32]) >> 32 = target frequency.
+	 *
+	 * Back-solve the multiplier so the 3.579545MHz ACPI timer frequency is
+	 * used.
+	 */
+	msr.hi = (3579545ULL << 32) / CTC_FREQ;
+
+	/* Set PM1 timer IO port and enable */
+	msr.lo = EMULATE_PM_TMR_EN | (upriv->acpi_base + R_ACPI_PM1_TMR);
+	debug("PM timer %x %x\n", msr.hi, msr.lo);
+	msr_write(MSR_EMULATE_PM_TIMER, msr);
+}
+
+static void google_chromeec_ioport_range(uint *out_basep, uint *out_sizep)
+{
+	uint base;
+	uint size;
+
+	if (IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC_MEC)) {
+		base = MEC_EMI_BASE;
+		size = MEC_EMI_SIZE;
+	} else {
+		base = EC_HOST_CMD_REGION0;
+		size = 2 * EC_HOST_CMD_REGION_SIZE;
+		/* Make sure MEMMAP region follows host cmd region */
+		assert(base + size == EC_LPC_ADDR_MEMMAP);
+		size += EC_MEMMAP_SIZE;
+	}
+
+	*out_basep = base;
+	*out_sizep = size;
+}
+
+static void early_ec_init(void)
+{
+	uint base, size;
+
+	/*
+	 * Set up LPC decoding for the Chrome OS EC I/O port ranges:
+	 * - Ports 62/66, 60/64, and 200->208
+	 * - Chrome OS EC communication I/O ports
+	 */
+	lpc_enable_fixed_io_ranges(LPC_IOE_EC_62_66 | LPC_IOE_KBC_60_64 |
+				   LPC_IOE_LGE_200);
+	google_chromeec_ioport_range(&base, &size);
+	lpc_open_pmio_window(base, size);
+}
+
+static int arch_cpu_init_tpl(void)
+{
+	struct udevice *pmc, *sa, *p2sb, *gpio, *serial, *spi, *lpc;
+	int ret;
+
+	ret = uclass_first_device_err(UCLASS_ACPI_PMC, &pmc);
+	if (ret)
+		return log_msg_ret("PMC", ret);
+
+	/* Clear global reset promotion bit */
+	ret = pmc_global_reset_set_enable(pmc, false);
+	if (ret)
+		return log_msg_ret("disable global reset", ret);
+
+	enable_pm_timer_emulation(pmc);
+
+	ret = uclass_first_device_err(UCLASS_P2SB, &p2sb);
+	if (ret)
+		return log_msg_ret("p2sb", ret);
+	ret = uclass_first_device_err(UCLASS_NORTHBRIDGE, &sa);
+	if (ret)
+		return log_msg_ret("northbridge", ret);
+	ret = uclass_first_device_err(UCLASS_GPIO, &gpio);
+	if (ret)
+		return log_msg_ret("gpio", ret);
+	gd->baudrate = CONFIG_BAUDRATE;
+	ret = uclass_first_device_err(UCLASS_SERIAL, &serial);
+	if (ret)
+		return log_msg_ret("serial", ret);
+	if (CONFIG_IS_ENABLED(SPI_FLASH_SUPPORT)) {
+		ret = uclass_first_device_err(UCLASS_SPI, &spi);
+		if (ret)
+			return log_msg_ret("SPI", ret);
+	} else {
+		/* Alternative code if we don't have SPI in TPL */
+		if (BOOT_FROM_FAST_SPI_FLASH)
+			printf("Warning: Enable APL_SPI_FLASHBOOT to use SPI-flash driver in TPL");
+		ret = fast_spi_cache_bios_region();
+		if (ret)
+			return log_msg_ret("BIOS cache", ret);
+	}
+	ret = pmc_disable_tco(pmc);
+	if (ret)
+		return log_msg_ret("disable TCO", ret);
+	ret = pmc_gpe_init(gpio);
+	if (ret)
+		return log_msg_ret("pmc_gpe", ret);
+	ret = uclass_first_device_err(UCLASS_LPC, &lpc);
+	if (ret)
+		return log_msg_ret("lpc", ret);
+
+	early_ec_init();
+
+	return 0;
+}
+
+/*
+ * Enables several BARs and devices which are needed for memory init
+ * - MCH_BASE_ADDR is needed in order to talk to the memory controller
+ * - HPET is enabled because FSP wants to store a pointer to global data in the
+ *   HPET comparator register
+ */
+static int arch_cpu_init_spl(void)
+{
+	struct udevice *pmc, *p2sb;
+	int ret;
+
+	ret = uclass_first_device_err(UCLASS_ACPI_PMC, &pmc);
+	if (ret)
+		return log_msg_ret("Could not probe PMC", ret);
+	ret = uclass_first_device_err(UCLASS_P2SB, &p2sb);
+	if (ret)
+		return log_msg_ret("Cannot set up p2sb", ret);
+
+	lpc_io_setup_comm_a_b();
+	/* enable_rtc_upper_bank(); */
+
+	ret = pmc_init(pmc);
+	if (ret < 0)
+		return log_msg_ret("Could not init PMC", ret);
+#ifdef CONFIG_HAVE_ACPI_RESUME
+	ret = pmc_prev_sleep_state(pmc);
+	if (ret < 0)
+		return log_msg_ret("Could not get PMC sleep state", ret);
+	gd->arch.prev_sleep_state = ret;
+#endif
+
+	return 0;
+}
+
+int arch_cpu_init(void)
+{
+	int ret = 0;
+
+	if (spl_phase() == PHASE_TPL)
+		ret = arch_cpu_init_tpl();
+	else if (spl_phase() == PHASE_SPL)
+		ret = arch_cpu_init_spl();
+	if (ret)
+		printf("%s: Error %d\n", __func__, ret);
+
+	return ret;
+}
+
+void board_debug_uart_init(void)
+{
+	init_for_uart();
+}