diff --git a/arch/x86/cpu/apollolake/Makefile b/arch/x86/cpu/apollolake/Makefile
index ff42d0fd619..fa53ea10b79 100644
--- a/arch/x86/cpu/apollolake/Makefile
+++ b/arch/x86/cpu/apollolake/Makefile
@@ -2,6 +2,7 @@
 #
 # Copyright (c) 2016 Google, Inc
 
+obj-y += gpio.o
 obj-y += lpss.o
 obj-y += pmc.o
 obj-y += uart.o
diff --git a/arch/x86/cpu/apollolake/gpio.c b/arch/x86/cpu/apollolake/gpio.c
new file mode 100644
index 00000000000..80364006ef0
--- /dev/null
+++ b/arch/x86/cpu/apollolake/gpio.c
@@ -0,0 +1,735 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Intel Corp.
+ * Copyright 2019 Google LLC
+ *
+ * Taken partly from coreboot gpio.c
+ */
+
+#define LOG_CATEGORY UCLASS_GPIO
+
+#include <common.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <irq.h>
+#include <p2sb.h>
+#include <spl.h>
+#include <asm-generic/gpio.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/gpio_defs.h>
+#include <asm/arch/itss.h>
+
+/**
+ * struct apl_gpio_platdata - platform data for each device
+ *
+ * @dtplat: of-platdata data from C struct
+ * @num_cfgs: Number of configuration words for each pad
+ * @comm: Pad community for this device
+ */
+struct apl_gpio_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	/* Put this first since driver model will copy the data here */
+	struct dtd_intel_apl_gpio dtplat;
+#endif
+	int num_cfgs;
+	const struct pad_community *comm;
+};
+
+/** struct apl_gpio_priv - private data for each device
+ *
+ * @itss: ITSS device (for interrupt handling)
+ * @itss_pol_cfg: Use to program Interrupt Polarity Control (IPCx) register
+ *	Each bit represents IRQx Active High Polarity Disable configuration:
+ *	when set to 1, the interrupt polarity associated with IRQx is inverted
+ *	to appear as Active Low to IOAPIC and vice versa
+ */
+struct apl_gpio_priv {
+	struct udevice *itss;
+	bool itss_pol_cfg;
+};
+
+#define GPIO_DWx_SIZE(x)	(sizeof(u32) * (x))
+#define PAD_CFG_OFFSET(x, dw_num)	((x) + GPIO_DWx_SIZE(dw_num))
+#define PAD_CFG0_OFFSET(x)	PAD_CFG_OFFSET(x, 0)
+#define PAD_CFG1_OFFSET(x)	PAD_CFG_OFFSET(x, 1)
+
+#define MISCCFG_GPE0_DW0_SHIFT 8
+#define MISCCFG_GPE0_DW0_MASK (0xf << MISCCFG_GPE0_DW0_SHIFT)
+#define MISCCFG_GPE0_DW1_SHIFT 12
+#define MISCCFG_GPE0_DW1_MASK (0xf << MISCCFG_GPE0_DW1_SHIFT)
+#define MISCCFG_GPE0_DW2_SHIFT 16
+#define MISCCFG_GPE0_DW2_MASK (0xf << MISCCFG_GPE0_DW2_SHIFT)
+
+#define GPI_SMI_STS_OFFSET(comm, group) ((comm)->gpi_smi_sts_reg_0 +	\
+				((group) * sizeof(u32)))
+#define GPI_SMI_EN_OFFSET(comm, group) ((comm)->gpi_smi_en_reg_0 +	\
+				((group) * sizeof(u32)))
+#define GPI_IS_OFFSET(comm, group) ((comm)->gpi_int_sts_reg_0 +	\
+				((group) * sizeof(uint32_t)))
+#define GPI_IE_OFFSET(comm, group) ((comm)->gpi_int_en_reg_0 +	\
+				((group) * sizeof(uint32_t)))
+
+static const struct reset_mapping rst_map[] = {
+	{ .logical = PAD_CFG0_LOGICAL_RESET_PWROK, .chipset = 0U << 30 },
+	{ .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 },
+	{ .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 },
+};
+
+static const struct pad_group apl_community_n_groups[] = {
+	INTEL_GPP(N_OFFSET, N_OFFSET, GPIO_31),	/* NORTH 0 */
+	INTEL_GPP(N_OFFSET, GPIO_32, JTAG_TRST_B),	/* NORTH 1 */
+	INTEL_GPP(N_OFFSET, JTAG_TMS, SVID0_CLK),	/* NORTH 2 */
+};
+
+static const struct pad_group apl_community_w_groups[] = {
+	INTEL_GPP(W_OFFSET, W_OFFSET, OSC_CLK_OUT_1),/* WEST 0 */
+	INTEL_GPP(W_OFFSET, OSC_CLK_OUT_2, SUSPWRDNACK),/* WEST 1 */
+};
+
+static const struct pad_group apl_community_sw_groups[] = {
+	INTEL_GPP(SW_OFFSET, SW_OFFSET, SMB_ALERTB),	/* SOUTHWEST 0 */
+	INTEL_GPP(SW_OFFSET, SMB_CLK, LPC_FRAMEB),	/* SOUTHWEST 1 */
+};
+
+static const struct pad_group apl_community_nw_groups[] = {
+	INTEL_GPP(NW_OFFSET, NW_OFFSET, PROCHOT_B),	/* NORTHWEST 0 */
+	INTEL_GPP(NW_OFFSET, PMIC_I2C_SCL, GPIO_106),/* NORTHWEST 1 */
+	INTEL_GPP(NW_OFFSET, GPIO_109, GPIO_123),	/* NORTHWEST 2 */
+};
+
+/* TODO(sjg@chromium.org): Consider moving this to device tree */
+static const struct pad_community apl_gpio_communities[] = {
+	{
+		.port = PID_GPIO_N,
+		.first_pad = N_OFFSET,
+		.last_pad = SVID0_CLK,
+		.num_gpi_regs = NUM_N_GPI_REGS,
+		.gpi_status_offset = NUM_NW_GPI_REGS + NUM_W_GPI_REGS
+			+ NUM_SW_GPI_REGS,
+		.pad_cfg_base = PAD_CFG_BASE,
+		.host_own_reg_0 = HOSTSW_OWN_REG_0,
+		.gpi_int_sts_reg_0 = GPI_INT_STS_0,
+		.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+		.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+		.max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+		.name = "GPIO_GPE_N",
+		.acpi_path = "\\_SB.GPO0",
+		.reset_map = rst_map,
+		.num_reset_vals = ARRAY_SIZE(rst_map),
+		.groups = apl_community_n_groups,
+		.num_groups = ARRAY_SIZE(apl_community_n_groups),
+	}, {
+		.port = PID_GPIO_NW,
+		.first_pad = NW_OFFSET,
+		.last_pad = GPIO_123,
+		.num_gpi_regs = NUM_NW_GPI_REGS,
+		.gpi_status_offset = NUM_W_GPI_REGS + NUM_SW_GPI_REGS,
+		.pad_cfg_base = PAD_CFG_BASE,
+		.host_own_reg_0 = HOSTSW_OWN_REG_0,
+		.gpi_int_sts_reg_0 = GPI_INT_STS_0,
+		.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+		.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+		.max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+		.name = "GPIO_GPE_NW",
+		.acpi_path = "\\_SB.GPO1",
+		.reset_map = rst_map,
+		.num_reset_vals = ARRAY_SIZE(rst_map),
+		.groups = apl_community_nw_groups,
+		.num_groups = ARRAY_SIZE(apl_community_nw_groups),
+	}, {
+		.port = PID_GPIO_W,
+		.first_pad = W_OFFSET,
+		.last_pad = SUSPWRDNACK,
+		.num_gpi_regs = NUM_W_GPI_REGS,
+		.gpi_status_offset = NUM_SW_GPI_REGS,
+		.pad_cfg_base = PAD_CFG_BASE,
+		.host_own_reg_0 = HOSTSW_OWN_REG_0,
+		.gpi_int_sts_reg_0 = GPI_INT_STS_0,
+		.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+		.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+		.max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+		.name = "GPIO_GPE_W",
+		.acpi_path = "\\_SB.GPO2",
+		.reset_map = rst_map,
+		.num_reset_vals = ARRAY_SIZE(rst_map),
+		.groups = apl_community_w_groups,
+		.num_groups = ARRAY_SIZE(apl_community_w_groups),
+	}, {
+		.port = PID_GPIO_SW,
+		.first_pad = SW_OFFSET,
+		.last_pad = LPC_FRAMEB,
+		.num_gpi_regs = NUM_SW_GPI_REGS,
+		.gpi_status_offset = 0,
+		.pad_cfg_base = PAD_CFG_BASE,
+		.host_own_reg_0 = HOSTSW_OWN_REG_0,
+		.gpi_int_sts_reg_0 = GPI_INT_STS_0,
+		.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+		.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+		.max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+		.name = "GPIO_GPE_SW",
+		.acpi_path = "\\_SB.GPO3",
+		.reset_map = rst_map,
+		.num_reset_vals = ARRAY_SIZE(rst_map),
+		.groups = apl_community_sw_groups,
+		.num_groups = ARRAY_SIZE(apl_community_sw_groups),
+	},
+};
+
+static size_t relative_pad_in_comm(const struct pad_community *comm,
+				   uint gpio)
+{
+	return gpio - comm->first_pad;
+}
+
+/* find the group within the community that the pad is a part of */
+static int gpio_group_index(const struct pad_community *comm, uint relative_pad)
+{
+	int i;
+
+	if (!comm->groups)
+		return -ESPIPE;
+
+	/* find the base pad number for this pad's group */
+	for (i = 0; i < comm->num_groups; i++) {
+		if (relative_pad >= comm->groups[i].first_pad &&
+		    relative_pad < comm->groups[i].first_pad +
+		    comm->groups[i].size)
+			return i;
+	}
+
+	return -ENOENT;
+}
+
+static int gpio_group_index_scaled(const struct pad_community *comm,
+				   uint relative_pad, size_t scale)
+{
+	int ret;
+
+	ret = gpio_group_index(comm, relative_pad);
+	if (ret < 0)
+		return ret;
+
+	return ret * scale;
+}
+
+static int gpio_within_group(const struct pad_community *comm,
+			     uint relative_pad)
+{
+	int ret;
+
+	ret = gpio_group_index(comm, relative_pad);
+	if (ret < 0)
+		return ret;
+
+	return relative_pad - comm->groups[ret].first_pad;
+}
+
+static u32 gpio_bitmask_within_group(const struct pad_community *comm,
+				     uint relative_pad)
+{
+	return 1U << gpio_within_group(comm, relative_pad);
+}
+
+/**
+ * gpio_get_device() - Find the device for a particular pad
+ *
+ * Each GPIO device is attached to one community and this supports a number of
+ * GPIO pins. This function finds the device which controls a particular pad.
+ *
+ * @pad: Pad to check
+ * @devp: Returns the device for that pad
+ * @return 0 if OK, -ENOTBLK if no device was found for the given pin
+ */
+static int gpio_get_device(uint pad, struct udevice **devp)
+{
+	struct udevice *dev;
+
+	/*
+	 * We have to probe each one of these since the community link is only
+	 * attached in apl_gpio_ofdata_to_platdata().
+	 */
+	uclass_foreach_dev_probe(UCLASS_GPIO, dev) {
+		struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+		const struct pad_community *comm = plat->comm;
+
+		if (pad >= comm->first_pad && pad <= comm->last_pad) {
+			*devp = dev;
+			return 0;
+		}
+	}
+	printf("pad %d not found\n", pad);
+
+	return -ENOTBLK;
+}
+
+static int gpio_configure_owner(struct udevice *dev,
+				const struct pad_config *cfg,
+				const struct pad_community *comm)
+{
+	u32 hostsw_own;
+	u16 hostsw_own_offset;
+	int pin;
+	int ret;
+
+	pin = relative_pad_in_comm(comm, cfg->pad);
+
+	/* Based on the gpio pin number configure the corresponding bit in
+	 * HOSTSW_OWN register. Value of 0x1 indicates GPIO Driver onwership.
+	 */
+	hostsw_own_offset = comm->host_own_reg_0;
+	ret = gpio_group_index_scaled(comm, pin, sizeof(u32));
+	if (ret < 0)
+		return ret;
+	hostsw_own_offset += ret;
+
+	hostsw_own = pcr_read32(dev, hostsw_own_offset);
+
+	/* The 4th bit in pad_config 1 (RO) is used to indicate if the pad
+	 * needs GPIO driver ownership.  Set the bit if GPIO driver ownership
+	 * requested, otherwise clear the bit.
+	 */
+	if (cfg->pad_config[1] & PAD_CFG1_GPIO_DRIVER)
+		hostsw_own |= gpio_bitmask_within_group(comm, pin);
+	else
+		hostsw_own &= ~gpio_bitmask_within_group(comm, pin);
+
+	pcr_write32(dev, hostsw_own_offset, hostsw_own);
+
+	return 0;
+}
+
+static int gpi_enable_smi(struct udevice *dev, const struct pad_config *cfg,
+			  const struct pad_community *comm)
+{
+	u32 value;
+	u16 sts_reg;
+	u16 en_reg;
+	int group;
+	int pin;
+	int ret;
+
+	if ((cfg->pad_config[0] & PAD_CFG0_ROUTE_SMI) != PAD_CFG0_ROUTE_SMI)
+		return 0;
+
+	pin = relative_pad_in_comm(comm, cfg->pad);
+	ret = gpio_group_index(comm, pin);
+	if (ret < 0)
+		return ret;
+	group = ret;
+
+	sts_reg = GPI_SMI_STS_OFFSET(comm, group);
+	value = pcr_read32(dev, sts_reg);
+	/* Write back 1 to reset the sts bits */
+	pcr_write32(dev, sts_reg, value);
+
+	/* Set enable bits */
+	en_reg = GPI_SMI_EN_OFFSET(comm, group);
+	pcr_setbits32(dev, en_reg, gpio_bitmask_within_group(comm, pin));
+
+	return 0;
+}
+
+static int gpio_configure_itss(struct udevice *dev,
+			       const struct pad_config *cfg,
+			       uint pad_cfg_offset)
+{
+	struct apl_gpio_priv *priv = dev_get_priv(dev);
+
+	if (!priv->itss_pol_cfg)
+		return -ENOSYS;
+
+	int irq;
+
+	/* Set up ITSS polarity if pad is routed to APIC.
+	 *
+	 * The ITSS takes only active high interrupt signals. Therefore,
+	 * if the pad configuration indicates an inversion assume the
+	 * intent is for the ITSS polarity. Before forwarding on the
+	 * request to the APIC there's an inversion setting for how the
+	 * signal is forwarded to the APIC. Honor the inversion setting
+	 * in the GPIO pad configuration so that a hardware active low
+	 * signal looks that way to the APIC (double inversion).
+	 */
+	if (!(cfg->pad_config[0] & PAD_CFG0_ROUTE_IOAPIC))
+		return 0;
+
+	irq = pcr_read32(dev, PAD_CFG1_OFFSET(pad_cfg_offset));
+	irq &= PAD_CFG1_IRQ_MASK;
+	if (!irq) {
+		log_err("GPIO %u doesn't support APIC routing\n", cfg->pad);
+
+		return -EPROTONOSUPPORT;
+	}
+	irq_set_polarity(priv->itss, irq,
+			 cfg->pad_config[0] & PAD_CFG0_RX_POL_INVERT);
+
+	return 0;
+}
+
+/* Number of DWx config registers can be different for different SOCs */
+static uint pad_config_offset(const struct pad_community *comm, uint pad)
+{
+	size_t offset;
+
+	offset = relative_pad_in_comm(comm, pad);
+	offset *= GPIO_DWx_SIZE(GPIO_NUM_PAD_CFG_REGS);
+
+	return offset + comm->pad_cfg_base;
+}
+
+static int gpio_pad_reset_config_override(const struct pad_community *comm,
+					  u32 config_value)
+{
+	const struct reset_mapping *rst_map = comm->reset_map;
+	int i;
+
+	/* Logical reset values equal chipset values */
+	if (!rst_map || !comm->num_reset_vals)
+		return config_value;
+
+	for (i = 0; i < comm->num_reset_vals; i++, rst_map++) {
+		if ((config_value & PAD_CFG0_RESET_MASK) == rst_map->logical) {
+			config_value &= ~PAD_CFG0_RESET_MASK;
+			config_value |= rst_map->chipset;
+
+			return config_value;
+		}
+	}
+	log_err("Logical-to-Chipset mapping not found\n");
+
+	return -ENOENT;
+}
+
+static const int mask[4] = {
+	PAD_CFG0_TX_STATE |
+	PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE | PAD_CFG0_MODE_MASK |
+	PAD_CFG0_ROUTE_MASK | PAD_CFG0_RXTENCFG_MASK |
+	PAD_CFG0_RXINV_MASK | PAD_CFG0_PREGFRXSEL |
+	PAD_CFG0_TRIG_MASK | PAD_CFG0_RXRAW1_MASK |
+	PAD_CFG0_RXPADSTSEL_MASK | PAD_CFG0_RESET_MASK,
+
+#ifdef CONFIG_INTEL_GPIO_IOSTANDBY
+	PAD_CFG1_IOSTERM_MASK | PAD_CFG1_PULL_MASK | PAD_CFG1_IOSSTATE_MASK,
+#else
+	PAD_CFG1_IOSTERM_MASK | PAD_CFG1_PULL_MASK,
+#endif
+
+	PAD_CFG2_DEBOUNCE_MASK,
+
+	0,
+};
+
+/**
+ * gpio_configure_pad() - Configure a pad
+ *
+ * @dev: GPIO device containing the pad (see gpio_get_device())
+ * @cfg: Configuration to apply
+ * @return 0 if OK, -ve on error
+ */
+static int gpio_configure_pad(struct udevice *dev, const struct pad_config *cfg)
+{
+	struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+	const struct pad_community *comm = plat->comm;
+	uint config_offset;
+	u32 pad_conf, soc_pad_conf;
+	int ret;
+	int i;
+
+	if (IS_ERR(comm))
+		return PTR_ERR(comm);
+	config_offset = pad_config_offset(comm, cfg->pad);
+	for (i = 0; i < GPIO_NUM_PAD_CFG_REGS; i++) {
+		pad_conf = pcr_read32(dev, PAD_CFG_OFFSET(config_offset, i));
+
+		soc_pad_conf = cfg->pad_config[i];
+		if (i == 0) {
+			ret = gpio_pad_reset_config_override(comm,
+							     soc_pad_conf);
+			if (ret < 0)
+				return ret;
+			soc_pad_conf = ret;
+		}
+		soc_pad_conf &= mask[i];
+		soc_pad_conf |= pad_conf & ~mask[i];
+
+		log_debug("gpio_padcfg [0x%02x, %02zd] DW%d [0x%08x : 0x%08x : 0x%08x]\n",
+			  comm->port, relative_pad_in_comm(comm, cfg->pad), i,
+			  pad_conf,/* old value */
+			  cfg->pad_config[i], /* value passed from gpio table */
+			  soc_pad_conf); /*new value*/
+		pcr_write32(dev, PAD_CFG_OFFSET(config_offset, i),
+			    soc_pad_conf);
+	}
+	ret = gpio_configure_itss(dev, cfg, config_offset);
+	if (ret && ret != -ENOSYS)
+		return log_msg_ret("itss config failed", ret);
+	ret = gpio_configure_owner(dev, cfg, comm);
+	if (ret)
+		return ret;
+	ret = gpi_enable_smi(dev, cfg, comm);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static u32 get_config_reg_addr(struct udevice *dev, uint offset)
+{
+	struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+	const struct pad_community *comm = plat->comm;
+	uint config_offset;
+
+	config_offset = comm->pad_cfg_base + offset *
+		 GPIO_DWx_SIZE(GPIO_NUM_PAD_CFG_REGS);
+
+	return config_offset;
+}
+
+static u32 get_config_reg(struct udevice *dev, uint offset)
+{
+	uint config_offset = get_config_reg_addr(dev, offset);
+
+	return pcr_read32(dev, config_offset);
+}
+
+static int apl_gpio_direction_input(struct udevice *dev, uint offset)
+{
+	uint config_offset = get_config_reg_addr(dev, offset);
+
+	pcr_clrsetbits32(dev, config_offset,
+			 PAD_CFG0_MODE_MASK | PAD_CFG0_TX_STATE |
+				  PAD_CFG0_RX_DISABLE,
+			 PAD_CFG0_MODE_GPIO | PAD_CFG0_TX_DISABLE);
+
+	return 0;
+}
+
+static int apl_gpio_direction_output(struct udevice *dev, uint offset,
+				     int value)
+{
+	uint config_offset = get_config_reg_addr(dev, offset);
+
+	pcr_clrsetbits32(dev, config_offset,
+			 PAD_CFG0_MODE_MASK | PAD_CFG0_RX_STATE |
+				  PAD_CFG0_TX_DISABLE,
+			 PAD_CFG0_MODE_GPIO | PAD_CFG0_RX_DISABLE |
+				  (value ? PAD_CFG0_TX_STATE : 0));
+
+	return 0;
+}
+
+static int apl_gpio_get_function(struct udevice *dev, uint offset)
+{
+	uint mode, rx_tx;
+	u32 reg;
+
+	reg = get_config_reg(dev, offset);
+	mode = (reg & PAD_CFG0_MODE_MASK) >> PAD_CFG0_MODE_SHIFT;
+	if (!mode) {
+		rx_tx = reg & (PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE);
+		if (rx_tx == PAD_CFG0_TX_DISABLE)
+			return GPIOF_INPUT;
+		else if (rx_tx == PAD_CFG0_RX_DISABLE)
+			return GPIOF_OUTPUT;
+	}
+
+	return GPIOF_FUNC;
+}
+
+static int apl_gpio_get_value(struct udevice *dev, uint offset)
+{
+	uint mode, rx_tx;
+	u32 reg;
+
+	reg = get_config_reg(dev, offset);
+	mode = (reg & PAD_CFG0_MODE_MASK) >> PAD_CFG0_MODE_SHIFT;
+	if (!mode) {
+		rx_tx = reg & (PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE);
+		if (rx_tx == PAD_CFG0_TX_DISABLE)
+			return mode & PAD_CFG0_RX_STATE_BIT ? 1 : 0;
+		else if (rx_tx == PAD_CFG0_RX_DISABLE)
+			return mode & PAD_CFG0_TX_STATE_BIT ? 1 : 0;
+	}
+
+	return 0;
+}
+
+int gpio_route_gpe(struct udevice *itss, uint gpe0b, uint gpe0c, uint gpe0d)
+{
+	struct udevice *gpio_dev;
+	u32 misccfg_value;
+	u32 misccfg_clr;
+	int ret;
+
+	/* Get the group here for community specific MISCCFG register.
+	 * If any of these returns -1 then there is some error in devicetree
+	 * where the group is probably hardcoded and does not comply with the
+	 * PMC group defines. So we return from here and MISCFG is set to
+	 * default.
+	 */
+	ret = irq_route_pmc_gpio_gpe(itss, gpe0b);
+	if (ret)
+		return ret;
+	gpe0b = ret;
+
+	ret = irq_route_pmc_gpio_gpe(itss, gpe0c);
+	if (ret)
+		return ret;
+	gpe0c = ret;
+
+	ret = irq_route_pmc_gpio_gpe(itss, gpe0d);
+	if (ret)
+		return ret;
+	gpe0d = ret;
+
+	misccfg_value = gpe0b << MISCCFG_GPE0_DW0_SHIFT;
+	misccfg_value |= gpe0c << MISCCFG_GPE0_DW1_SHIFT;
+	misccfg_value |= gpe0d << MISCCFG_GPE0_DW2_SHIFT;
+
+	/* Program GPIO_MISCCFG */
+	misccfg_clr = MISCCFG_GPE0_DW2_MASK | MISCCFG_GPE0_DW1_MASK |
+		MISCCFG_GPE0_DW0_MASK;
+
+	log_debug("misccfg_clr:%x misccfg_value:%x\n", misccfg_clr,
+		  misccfg_value);
+	uclass_foreach_dev_probe(UCLASS_GPIO, gpio_dev) {
+		pcr_clrsetbits32(gpio_dev, GPIO_MISCCFG, misccfg_clr,
+				 misccfg_value);
+	}
+
+	return 0;
+}
+
+int gpio_gpi_clear_int_cfg(void)
+{
+	struct udevice *dev;
+	struct uclass *uc;
+	int ret;
+
+	ret = uclass_get(UCLASS_GPIO, &uc);
+	if (ret)
+		return log_msg_ret("gpio uc", ret);
+	uclass_foreach_dev(dev, uc) {
+		struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+		const struct pad_community *comm = plat->comm;
+		uint sts_value;
+		int group;
+
+		for (group = 0; group < comm->num_gpi_regs; group++) {
+			/* Clear the enable register */
+			pcr_write32(dev, GPI_IE_OFFSET(comm, group), 0);
+
+			/* Read and clear the set status register bits*/
+			sts_value = pcr_read32(dev,
+					       GPI_IS_OFFSET(comm, group));
+			pcr_write32(dev, GPI_IS_OFFSET(comm, group), sts_value);
+		}
+	}
+
+	return 0;
+}
+
+int gpio_config_pads(struct udevice *dev, int num_cfgs, u32 *pads,
+		     int pads_count)
+{
+	const u32 *ptr;
+	int i;
+
+	log_debug("%s: pads_count=%d\n", __func__, pads_count);
+	for (ptr = pads, i = 0; i < pads_count; ptr += 1 + num_cfgs, i++) {
+		struct udevice *pad_dev = NULL;
+		struct pad_config *cfg;
+		int ret;
+
+		cfg = (struct pad_config *)ptr;
+		ret = gpio_get_device(cfg->pad, &pad_dev);
+		if (ret)
+			return ret;
+		ret = gpio_configure_pad(pad_dev, cfg);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int apl_gpio_ofdata_to_platdata(struct udevice *dev)
+{
+	struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+	struct apl_gpio_priv *priv = dev_get_priv(dev);
+	struct p2sb_child_platdata *pplat;
+	int ret;
+	int i;
+
+	plat->num_cfgs = 2;
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	/*
+	 * It would be nice to do this in the bind() method, but with
+	 * of-platdata binding happens in the order that DM finds things in the
+	 * linker list (i.e. alphabetical order by driver name). So the GPIO
+	 * device may well be bound before its parent (p2sb), and this call
+	 * will fail if p2sb is not bound yet.
+	 *
+	 * TODO(sjg@chromium.org): Add a parent pointer to child devices in dtoc
+	 */
+	ret = p2sb_set_port_id(dev, plat->dtplat.intel_p2sb_port_id);
+	if (ret)
+		return log_msg_ret("Could not set port id", ret);
+#endif
+	/* Attach this device to its community structure */
+	pplat = dev_get_parent_platdata(dev);
+	for (i = 0; i < ARRAY_SIZE(apl_gpio_communities); i++) {
+		if (apl_gpio_communities[i].port == pplat->pid)
+			plat->comm = &apl_gpio_communities[i];
+	}
+	if (!plat->comm) {
+		log_err("Cannot find community for pid %d\n", pplat->pid);
+		return -EDOM;
+	}
+	ret = uclass_first_device_err(UCLASS_IRQ, &priv->itss);
+	if (ret)
+		return log_msg_ret("Cannot find ITSS", ret);
+
+	return 0;
+}
+
+static int apl_gpio_probe(struct udevice *dev)
+{
+	struct gpio_dev_priv *upriv = dev_get_uclass_priv(dev);
+	struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+	struct apl_gpio_priv *priv = dev_get_priv(dev);
+	const struct pad_community *comm = plat->comm;
+
+	upriv->gpio_count = comm->last_pad - comm->first_pad + 1;
+	upriv->bank_name = dev->name;
+	priv->itss_pol_cfg = true;
+
+	return 0;
+}
+
+static const struct dm_gpio_ops apl_gpio_ops = {
+	.get_function	= apl_gpio_get_function,
+	.get_value	= apl_gpio_get_value,
+	.direction_input = apl_gpio_direction_input,
+	.direction_output = apl_gpio_direction_output,
+};
+
+static const struct udevice_id apl_gpio_ids[] = {
+	{ .compatible = "intel,apl-gpio"},
+	{ }
+};
+
+U_BOOT_DRIVER(apl_gpio_drv) = {
+	.name		= "intel_apl_gpio",
+	.id		= UCLASS_GPIO,
+	.of_match	= apl_gpio_ids,
+	.probe		= apl_gpio_probe,
+	.ops		= &apl_gpio_ops,
+	.ofdata_to_platdata = apl_gpio_ofdata_to_platdata,
+	.priv_auto_alloc_size = sizeof(struct apl_gpio_priv),
+	.platdata_auto_alloc_size = sizeof(struct apl_gpio_platdata),
+};
diff --git a/arch/x86/include/asm/arch-apollolake/gpio.h b/arch/x86/include/asm/arch-apollolake/gpio.h
new file mode 100644
index 00000000000..19421950e61
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/gpio.h
@@ -0,0 +1,180 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Intel Corporation.
+ * Copyright 2019 Google LLC
+ *
+ * Modified from coreboot gpio.h
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+/**
+ * struct pad_config - config for a pad
+ * @pad: offset of pad within community
+ * @pad_config: Pad config data corresponding to DW0, DW1, etc.
+ */
+struct pad_config {
+	int pad;
+	u32 pad_config[4];
+};
+
+#include <asm/arch/gpio_apl.h>
+
+/* GPIO community IOSF sideband clock gating */
+#define MISCCFG_GPSIDEDPCGEN	BIT(5)
+/* GPIO community RCOMP clock gating */
+#define MISCCFG_GPRCOMPCDLCGEN	BIT(4)
+/* GPIO community RTC clock gating */
+#define MISCCFG_GPRTCDLCGEN	BIT(3)
+/* GFX controller clock gating */
+#define MISCCFG_GSXSLCGEN	BIT(2)
+/* GPIO community partition clock gating */
+#define MISCCFG_GPDPCGEN	BIT(1)
+/* GPIO community local clock gating */
+#define MISCCFG_GPDLCGEN	BIT(0)
+/* Enable GPIO community power management configuration */
+#define MISCCFG_ENABLE_GPIO_PM_CONFIG (MISCCFG_GPSIDEDPCGEN | \
+	MISCCFG_GPRCOMPCDLCGEN | MISCCFG_GPRTCDLCGEN | MISCCFG_GSXSLCGEN \
+	| MISCCFG_GPDPCGEN | MISCCFG_GPDLCGEN)
+
+/*
+ * GPIO numbers may not be contiguous and instead will have a different
+ * starting pin number for each pad group.
+ */
+#define INTEL_GPP_BASE(first_of_community, start_of_group, end_of_group,\
+			group_pad_base)					\
+	{								\
+		.first_pad = (start_of_group) - (first_of_community),	\
+		.size = (end_of_group) - (start_of_group) + 1,		\
+		.acpi_pad_base = (group_pad_base),			\
+	}
+
+/*
+ * A pad base of -1 indicates that this group uses contiguous numbering
+ * and a pad base should not be used for this group.
+ */
+#define PAD_BASE_NONE	-1
+
+/* The common/default group numbering is contiguous */
+#define INTEL_GPP(first_of_community, start_of_group, end_of_group)	\
+	INTEL_GPP_BASE(first_of_community, start_of_group, end_of_group,\
+		       PAD_BASE_NONE)
+
+/**
+ * struct reset_mapping - logical to actual value for PADRSTCFG in DW0
+ *
+ * Note that the values are expected to be within the field placement of the
+ * register itself. i.e. if the reset field is at 31:30 then the values within
+ * logical and chipset should occupy 31:30.
+ */
+struct reset_mapping {
+	u32 logical;
+	u32 chipset;
+};
+
+/**
+ * struct pad_group - describes the groups within each community
+ *
+ * @first_pad: offset of first pad of the group relative to the community
+ * @size: size of the group
+ * @acpi_pad_base: starting pin number for the pads in this group when they are
+ *	used in ACPI.  This is only needed if the pins are not contiguous across
+ *	groups. Most groups will have this set to PAD_BASE_NONE and use
+ *	contiguous numbering for ACPI.
+ */
+struct pad_group {
+	int first_pad;
+	uint size;
+	int acpi_pad_base;
+};
+
+/**
+ * struct pad_community - GPIO community
+ *
+ * This describes a community, or each group within a community when multiple
+ * groups exist inside a community
+ *
+ * @name: Community name
+ * @acpi_path: ACPI path
+ * @num_gpi_regs: number of gpi registers in community
+ * @max_pads_per_group: number of pads in each group; number of pads bit-mapped
+ *	in each GPI status/en and Host Own Reg
+ * @first_pad: first pad in community
+ * @last_pad: last pad in community
+ * @host_own_reg_0: offset to Host Ownership Reg 0
+ * @gpi_int_sts_reg_0: offset to GPI Int STS Reg 0
+ * @gpi_int_en_reg_0: offset to GPI Int Enable Reg 0
+ * @gpi_smi_sts_reg_0: offset to GPI SMI STS Reg 0
+ * @gpi_smi_en_reg_0: offset to GPI SMI EN Reg 0
+ * @pad_cfg_base: offset to first PAD_GFG_DW0 Reg
+ * @gpi_status_offset: specifies offset in struct gpi_status
+ * @port: PCR Port ID
+ * @reset_map: PADRSTCFG logical to chipset mapping
+ * @num_reset_vals: number of values in @reset_map
+ * @groups; list of groups for this community
+ * @num_groups: number of groups
+ */
+struct pad_community {
+	const char *name;
+	const char *acpi_path;
+	size_t num_gpi_regs;
+	size_t max_pads_per_group;
+	uint first_pad;
+	uint last_pad;
+	u16 host_own_reg_0;
+	u16 gpi_int_sts_reg_0;
+	u16 gpi_int_en_reg_0;
+	u16 gpi_smi_sts_reg_0;
+	u16 gpi_smi_en_reg_0;
+	u16 pad_cfg_base;
+	u8 gpi_status_offset;
+	u8 port;
+	const struct reset_mapping *reset_map;
+	size_t num_reset_vals;
+	const struct pad_group *groups;
+	size_t num_groups;
+};
+
+/**
+ * gpio_route_gpe() - set the GPIO groups for the general-purpose-event blocks
+ *
+ * The values from PMC register GPE_CFG are passed which is then mapped to
+ * proper groups for MISCCFG. This basically sets the MISCCFG register bits:
+ *  dw0 = gpe0_route[11:8]. This is ACPI GPE0b.
+ *  dw1 = gpe0_route[15:12]. This is ACPI GPE0c.
+ *  dw2 = gpe0_route[19:16]. This is ACPI GPE0d.
+ *
+ * @dev: ITSS device
+ * @gpe0b: Value for GPE0B
+ * @gpe0c: Value for GPE0C
+ * @gpe0d: Value for GPE0D
+ * @return 0 if OK, -ve on error
+ */
+int gpio_route_gpe(struct udevice *dev, uint gpe0b, uint gpe0c, uint gpe0d);
+
+/**
+ * gpio_config_pads() - Configure a list of pads
+ *
+ * Configures multiple pads using the provided data from the device tree.
+ *
+ * @dev: GPIO device (any will do)
+ * @num_cfgs: Number of configuration words for each pad (e.g. 2)
+ * @pads: Pad data, consisting of a pad number followed by @num_cfgs entries
+ *	containing the data for that pad
+ * @pads_count: Number of pads to configure
+ * @return 0 if OK, -ve on error
+ */
+int gpio_config_pads(struct udevice *dev, int num_cfgs, u32 *pads,
+		     int pads_count);
+
+/**
+ * gpio_gpi_clear_int_cfg() - Set up the interrupts for use
+ *
+ * This enables the interrupt inputs and clears the status register bits
+ *
+ * @return 0 if OK, -ve on error
+ */
+int gpio_gpi_clear_int_cfg(void);
+
+#endif
diff --git a/arch/x86/include/asm/arch-apollolake/gpio_apl.h b/arch/x86/include/asm/arch-apollolake/gpio_apl.h
new file mode 100644
index 00000000000..0706a5a34a9
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/gpio_apl.h
@@ -0,0 +1,491 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Definitions for the GPIO subsystem on Apollolake
+ *
+ * Placed in a separate file since some of these definitions can be used from
+ * assembly code
+ *
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 - 2017 Intel Corp.
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_APOLLOLAKE_GPIO_H_
+#define _SOC_APOLLOLAKE_GPIO_H_
+
+/*
+ * Miscellaneous Configuration register(MISCCFG).These are community-specific
+ * registers and are meant to house miscellaneous configuration fields per
+ * community. There are 8 GPIO groups: GPP_0 -> GPP_8 (Group 3 is absent)
+ */
+#define GPIO_MISCCFG		0x10 /* Miscellaneous Configuration offset */
+#define  GPIO_GPE_SW_31_0	0 /* SOUTHWEST GPIO#  0 ~ 31 belong to GROUP0 */
+#define  GPIO_GPE_SW_63_32	1 /* SOUTHWEST GPIO# 32 ~ 42 belong to GROUP1 */
+#define  GPIO_GPE_W_31_0	2 /* WEST      GPIO#  0 ~ 25 belong to GROUP2 */
+#define  GPIO_GPE_NW_31_0	4 /* NORTHWEST GPIO#  0 ~ 17 belong to GROUP4 */
+#define  GPIO_GPE_NW_63_32	5 /* NORTHWEST GPIO# 32 ~ 63 belong to GROUP5 */
+#define  GPIO_GPE_NW_95_64	6 /* NORTHWEST GPIO# 64 ~ 76 belong to GROUP6 */
+#define  GPIO_GPE_N_31_0	7 /* NORTH     GPIO#  0 ~ 31 belong to GROUP7 */
+#define  GPIO_GPE_N_63_32	8 /* NORTH     GPIO# 32 ~ 61 belong to GROUP8 */
+
+#define GPIO_MAX_NUM_PER_GROUP	32
+
+/* Host Software Pad Ownership Register.
+ * The pins in the community are divided into 3 groups :
+ * GPIO 0 ~ 31, GPIO 32 ~ 63, GPIO 64 ~ 95
+ */
+#define HOSTSW_OWN_REG_0		0x80
+
+#define PAD_CFG_BASE			0x500
+
+#define GPI_INT_STS_0			0x100
+#define GPI_INT_EN_0			0x110
+
+#define GPI_SMI_STS_0			0x140
+#define GPI_SMI_EN_0			0x150
+
+#define NUM_N_PADS			(PAD_N(SVID0_CLK) + 1)
+#define NUM_NW_PADS			(PAD_NW(GPIO_123) + 1)
+#define NUM_W_PADS			(PAD_W(SUSPWRDNACK) + 1)
+#define NUM_SW_PADS			(PAD_SW(LPC_FRAMEB) + 1)
+
+#define NUM_N_GPI_REGS	\
+	(ALIGN(NUM_N_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+#define NUM_NW_GPI_REGS	\
+	(ALIGN(NUM_NW_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+#define NUM_W_GPI_REGS	\
+	(ALIGN(NUM_W_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+#define NUM_SW_GPI_REGS	\
+	(ALIGN(NUM_SW_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+/*
+ * Total number of GPI status registers across all GPIO communities in the SOC
+ */
+#define NUM_GPI_STATUS_REGS		(NUM_N_GPI_REGS + NUM_NW_GPI_REGS \
+					+ NUM_W_GPI_REGS + NUM_SW_GPI_REGS)
+
+/* North community pads */
+#define GPIO_0				0
+#define GPIO_1				1
+#define GPIO_2				2
+#define GPIO_3				3
+#define GPIO_4				4
+#define GPIO_5				5
+#define GPIO_6				6
+#define GPIO_7				7
+#define GPIO_8				8
+#define GPIO_9				9
+#define GPIO_10				10
+#define GPIO_11				11
+#define GPIO_12				12
+#define GPIO_13				13
+#define GPIO_14				14
+#define GPIO_15				15
+#define GPIO_16				16
+#define GPIO_17				17
+#define GPIO_18				18
+#define GPIO_19				19
+#define GPIO_20				20
+#define GPIO_21				21
+#define GPIO_22				22
+#define GPIO_23				23
+#define GPIO_24				24
+#define GPIO_25				25
+#define GPIO_26				26
+#define GPIO_27				27
+#define GPIO_28				28
+#define GPIO_29				29
+#define GPIO_30				30
+#define GPIO_31				31
+#define GPIO_32				32
+#define GPIO_33				33
+#define GPIO_34				34
+#define GPIO_35				35
+#define GPIO_36				36
+#define GPIO_37				37
+#define GPIO_38				38
+#define GPIO_39				39
+#define GPIO_40				40
+#define GPIO_41				41
+#define GPIO_42				42
+#define GPIO_43				43
+#define GPIO_44				44
+#define GPIO_45				45
+#define GPIO_46				46
+#define GPIO_47				47
+#define GPIO_48				48
+#define GPIO_49				49
+#define GPIO_62				50
+#define GPIO_63				51
+#define GPIO_64				52
+#define GPIO_65				53
+#define GPIO_66				54
+#define GPIO_67				55
+#define GPIO_68				56
+#define GPIO_69				57
+#define GPIO_70				58
+#define GPIO_71				59
+#define GPIO_72				60
+#define GPIO_73				61
+#define JTAG_TCK			62
+#define JTAG_TRST_B			63
+#define JTAG_TMS			64
+#define JTAG_TDI			65
+#define JTAG_CX_PMODE			66
+#define JTAG_CX_PREQ_B			67
+#define JTAGX				68
+#define JTAG_CX_PRDY_B			69
+#define JTAG_TDO			70
+#define CNV_BRI_DT			71
+#define CNV_BRI_RSP			72
+#define CNV_RGI_DT			73
+#define CNV_RGI_RSP			74
+#define SVID0_ALERT_B			75
+#define SVID0_DATA			76
+#define SVID0_CLK			77
+
+/* Northwest community pads */
+#define GPIO_187			78
+#define GPIO_188			79
+#define GPIO_189			80
+#define GPIO_190			81
+#define GPIO_191			82
+#define GPIO_192			83
+#define GPIO_193			84
+#define GPIO_194			85
+#define GPIO_195			86
+#define GPIO_196			87
+#define GPIO_197			88
+#define GPIO_198			89
+#define GPIO_199			90
+#define GPIO_200			91
+#define GPIO_201			92
+#define GPIO_202			93
+#define GPIO_203			94
+#define GPIO_204			95
+#define PMC_SPI_FS0			96
+#define PMC_SPI_FS1			97
+#define PMC_SPI_FS2			98
+#define PMC_SPI_RXD			99
+#define PMC_SPI_TXD			100
+#define PMC_SPI_CLK			101
+#define PMIC_PWRGOOD			102
+#define PMIC_RESET_B			103
+#define GPIO_213			104
+#define GPIO_214			105
+#define GPIO_215			106
+#define PMIC_THERMTRIP_B		107
+#define PMIC_STDBY			108
+#define PROCHOT_B			109
+#define PMIC_I2C_SCL			110
+#define PMIC_I2C_SDA			111
+#define GPIO_74				112
+#define GPIO_75				113
+#define GPIO_76				114
+#define GPIO_77				115
+#define GPIO_78				116
+#define GPIO_79				117
+#define GPIO_80				118
+#define GPIO_81				119
+#define GPIO_82				120
+#define GPIO_83				121
+#define GPIO_84				122
+#define GPIO_85				123
+#define GPIO_86				124
+#define GPIO_87				125
+#define GPIO_88				126
+#define GPIO_89				127
+#define GPIO_90				128
+#define GPIO_91				129
+#define GPIO_92				130
+#define GPIO_97				131
+#define GPIO_98				132
+#define GPIO_99				133
+#define GPIO_100			134
+#define GPIO_101			135
+#define GPIO_102			136
+#define GPIO_103			137
+#define FST_SPI_CLK_FB			138
+#define GPIO_104			139
+#define GPIO_105			140
+#define GPIO_106			141
+#define GPIO_109			142
+#define GPIO_110			143
+#define GPIO_111			144
+#define GPIO_112			145
+#define GPIO_113			146
+#define GPIO_116			147
+#define GPIO_117			148
+#define GPIO_118			149
+#define GPIO_119			150
+#define GPIO_120			151
+#define GPIO_121			152
+#define GPIO_122			153
+#define GPIO_123			154
+
+/* West community pads */
+#define GPIO_124			155
+#define GPIO_125			156
+#define GPIO_126			157
+#define GPIO_127			158
+#define GPIO_128			159
+#define GPIO_129			160
+#define GPIO_130			161
+#define GPIO_131			162
+#define GPIO_132			163
+#define GPIO_133			164
+#define GPIO_134			165
+#define GPIO_135			166
+#define GPIO_136			167
+#define GPIO_137			168
+#define GPIO_138			169
+#define GPIO_139			170
+#define GPIO_146			171
+#define GPIO_147			172
+#define GPIO_148			173
+#define GPIO_149			174
+#define GPIO_150			175
+#define GPIO_151			176
+#define GPIO_152			177
+#define GPIO_153			178
+#define GPIO_154			179
+#define GPIO_155			180
+#define GPIO_209			181
+#define GPIO_210			182
+#define GPIO_211			183
+#define GPIO_212			184
+#define OSC_CLK_OUT_0			185
+#define OSC_CLK_OUT_1			186
+#define OSC_CLK_OUT_2			187
+#define OSC_CLK_OUT_3			188
+#define OSC_CLK_OUT_4			189
+#define PMU_AC_PRESENT			190
+#define PMU_BATLOW_B			191
+#define PMU_PLTRST_B			192
+#define PMU_PWRBTN_B			193
+#define PMU_RESETBUTTON_B		194
+#define PMU_SLP_S0_B			195
+#define PMU_SLP_S3_B			196
+#define PMU_SLP_S4_B			197
+#define PMU_SUSCLK			198
+#define PMU_WAKE_B			199
+#define SUS_STAT_B			200
+#define SUSPWRDNACK			201
+
+/* Southwest community pads */
+#define GPIO_205			202
+#define GPIO_206			203
+#define GPIO_207			204
+#define GPIO_208			205
+#define GPIO_156			206
+#define GPIO_157			207
+#define GPIO_158			208
+#define GPIO_159			209
+#define GPIO_160			210
+#define GPIO_161			211
+#define GPIO_162			212
+#define GPIO_163			213
+#define GPIO_164			214
+#define GPIO_165			215
+#define GPIO_166			216
+#define GPIO_167			217
+#define GPIO_168			218
+#define GPIO_169			219
+#define GPIO_170			220
+#define GPIO_171			221
+#define GPIO_172			222
+#define GPIO_179			223
+#define GPIO_173			224
+#define GPIO_174			225
+#define GPIO_175			226
+#define GPIO_176			227
+#define GPIO_177			228
+#define GPIO_178			229
+#define GPIO_186			230
+#define GPIO_182			231
+#define GPIO_183			232
+#define SMB_ALERTB			233
+#define SMB_CLK				234
+#define SMB_DATA			235
+#define LPC_ILB_SERIRQ			236
+#define LPC_CLKOUT0			237
+#define LPC_CLKOUT1			238
+#define LPC_AD0				239
+#define LPC_AD1				240
+#define LPC_AD2				241
+#define LPC_AD3				242
+#define LPC_CLKRUNB			243
+#define LPC_FRAMEB			244
+
+/* PERST_0 not defined */
+#define GPIO_PRT0_UDEF			0xFF
+
+#define TOTAL_PADS			245
+#define N_OFFSET			GPIO_0
+#define NW_OFFSET			GPIO_187
+#define W_OFFSET			GPIO_124
+#define SW_OFFSET			GPIO_205
+
+/* Macros for translating a global pad offset to a local offset */
+#define PAD_N(pad)			(pad - N_OFFSET)
+#define PAD_NW(pad)			(pad - NW_OFFSET)
+#define PAD_W(pad)			(pad - W_OFFSET)
+#define PAD_SW(pad)			(pad - SW_OFFSET)
+
+/* Linux names of the GPIO devices */
+#define GPIO_COMM_N_NAME		"INT3452:00"
+#define GPIO_COMM_NW_NAME		"INT3452:01"
+#define GPIO_COMM_W_NAME		"INT3452:02"
+#define GPIO_COMM_SW_NAME		"INT3452:03"
+
+/* Following is used in gpio asl */
+#define GPIO_COMM_NAME			"INT3452"
+#define GPIO_COMM_0_DESC	\
+	"General Purpose Input/Output (GPIO) Controller - North"
+#define GPIO_COMM_1_DESC	\
+	"General Purpose Input/Output (GPIO) Controller - Northwest"
+#define GPIO_COMM_2_DESC	\
+	"General Purpose Input/Output (GPIO) Controller - West"
+#define GPIO_COMM_3_DESC	\
+	"General Purpose Input/Output (GPIO) Controller - Southwest"
+
+#define GPIO_COMM0_PID			PID_GPIO_N
+#define GPIO_COMM1_PID			PID_GPIO_NW
+#define GPIO_COMM2_PID			PID_GPIO_W
+#define GPIO_COMM3_PID			PID_GPIO_SW
+
+/*
+ * IOxAPIC IRQs for the GPIOs, overlap is expected as we encourage to use
+ * shared IRQ instead of direct IRQ, in case of overlapping, we can easily
+ * program one of the overlap to shared IRQ to avoid the conflict.
+ */
+
+/* NorthWest community pads */
+#define PMIC_I2C_SDA_IRQ		0x32
+#define GPIO_74_IRQ			0x33
+#define GPIO_75_IRQ			0x34
+#define GPIO_76_IRQ			0x35
+#define GPIO_77_IRQ			0x36
+#define GPIO_78_IRQ			0x37
+#define GPIO_79_IRQ			0x38
+#define GPIO_80_IRQ			0x39
+#define GPIO_81_IRQ			0x3A
+#define GPIO_82_IRQ			0x3B
+#define GPIO_83_IRQ			0x3C
+#define GPIO_84_IRQ			0x3D
+#define GPIO_85_IRQ			0x3E
+#define GPIO_86_IRQ			0x3F
+#define GPIO_87_IRQ			0x40
+#define GPIO_88_IRQ			0x41
+#define GPIO_89_IRQ			0x42
+#define GPIO_90_IRQ			0x43
+#define GPIO_91_IRQ			0x44
+#define GPIO_97_IRQ			0x49
+#define GPIO_98_IRQ			0x4A
+#define GPIO_99_IRQ			0x4B
+#define GPIO_100_IRQ			0x4C
+#define GPIO_101_IRQ			0x4D
+#define GPIO_102_IRQ			0x4E
+#define GPIO_103_IRQ			0x4F
+#define GPIO_104_IRQ			0x50
+#define GPIO_105_IRQ			0x51
+#define GPIO_106_IRQ			0x52
+#define GPIO_109_IRQ			0x54
+#define GPIO_110_IRQ			0x55
+#define GPIO_111_IRQ			0x56
+#define GPIO_112_IRQ			0x57
+#define GPIO_113_IRQ			0x58
+#define GPIO_116_IRQ			0x5B
+#define GPIO_117_IRQ			0x5C
+#define GPIO_118_IRQ			0x5D
+#define GPIO_119_IRQ			0x5E
+#define GPIO_120_IRQ			0x5F
+#define GPIO_121_IRQ			0x60
+#define GPIO_122_IRQ			0x61
+#define GPIO_123_IRQ			0x62
+
+/* North community pads */
+#define GPIO_0_IRQ			0x63
+#define GPIO_1_IRQ			0x64
+#define GPIO_2_IRQ			0x65
+#define GPIO_3_IRQ			0x66
+#define GPIO_4_IRQ			0x67
+#define GPIO_5_IRQ			0x68
+#define GPIO_6_IRQ			0x69
+#define GPIO_7_IRQ			0x6A
+#define GPIO_8_IRQ			0x6B
+#define GPIO_9_IRQ			0x6C
+#define GPIO_10_IRQ			0x6D
+#define GPIO_11_IRQ			0x6E
+#define GPIO_12_IRQ			0x6F
+#define GPIO_13_IRQ			0x70
+#define GPIO_14_IRQ			0x71
+#define GPIO_15_IRQ			0x72
+#define GPIO_16_IRQ			0x73
+#define GPIO_17_IRQ			0x74
+#define GPIO_18_IRQ			0x75
+#define GPIO_19_IRQ			0x76
+#define GPIO_20_IRQ			0x77
+#define GPIO_21_IRQ			0x32
+#define GPIO_22_IRQ			0x33
+#define GPIO_23_IRQ			0x34
+#define GPIO_24_IRQ			0x35
+#define GPIO_25_IRQ			0x36
+#define GPIO_26_IRQ			0x37
+#define GPIO_27_IRQ			0x38
+#define GPIO_28_IRQ			num_reset_vals0x39
+#define GPIO_29_IRQ			0x3A
+#define GPIO_30_IRQ			0x3B
+#define GPIO_31_IRQ			0x3C
+#define GPIO_32_IRQ			0x3D
+#define GPIO_33_IRQ			0x3E
+#define GPIO_34_IRQ			0x3F
+#define GPIO_35_IRQ			0x40
+#define GPIO_36_IRQ			0x41
+#define GPIO_37_IRQ			0x42
+#define GPIO_38_IRQ			0x43
+#define GPIO_39_IRQ			0x44
+#define GPIO_40_IRQ			0x45
+#define GPIO_41_IRQ			0x46
+#define GPIO_42_IRQ			0x47
+#define GPIO_43_IRQ			0x48
+#define GPIO_44_IRQ			0x49
+#define GPIO_45_IRQ			0x4A
+#define GPIO_46_IRQ			0x4B
+#define GPIO_47_IRQ			0x4C
+#define GPIO_48_IRQ			0x4D
+#define GPIO_49_IRQ			0x4E
+#define GPIO_62_IRQ			0x5B
+#define GPIO_63_IRQ			0x5C
+#define GPIO_64_IRQ			0x5D
+#define GPIO_65_IRQ			0x5E
+#define GPIO_66_IRQ			0x5F
+#define GPIO_67_IRQ			0x60
+#define GPIO_68_IRQ			0x61
+#define GPIO_69_IRQ			0x62
+#define GPIO_70_IRQ			0x63
+#define GPIO_71_IRQ			0x64
+#define GPIO_72_IRQ			0x65
+#define GPIO_73_IRQ			0x66
+
+/*
+ * Number of PAD config registers in the Soc that have DW0 and DW1. It should
+ * be 2.
+ */
+#define GPIO_NUM_PAD_CFG_REGS   2 /* DW0, DW1 */
+
+#endif /* _SOC_APOLLOLAKE_GPIO_H_ */
diff --git a/arch/x86/include/asm/arch-apollolake/gpio_defs.h b/arch/x86/include/asm/arch-apollolake/gpio_defs.h
new file mode 100644
index 00000000000..5f8ab71ab47
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/gpio_defs.h
@@ -0,0 +1,398 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015-2016 Intel Corp.
+ * Copyright 2019 Google LLC
+ *
+ * Modified from coreboot gpio_defs.h
+ */
+
+#ifndef _ASM_ARCH_GPIO_DEFS_H_
+#define _ASM_ARCH_GPIO_DEFS_H_
+
+/* Port ids */
+#if IS_ENABLED(CONFIG_SOC_INTEL_GLK)
+#define PID_GPIO_AUDIO	0xC9
+#define PID_GPIO_SCC	0xC8
+#else
+#define PID_GPIO_SW	0xC0
+#define PID_GPIO_S	0xC2
+#define PID_GPIO_W	0xC7
+#endif
+#define PID_GPIO_NW	0xC4
+#define PID_GPIO_N	0xC5
+#define PID_ITSS	0xD0
+#define PID_RTC		0xD1
+
+#define PAD_CFG0_TX_STATE_BIT		0
+#define PAD_CFG0_TX_STATE		(1 << PAD_CFG0_TX_STATE_BIT)
+#define PAD_CFG0_RX_STATE_BIT		1
+#define PAD_CFG0_RX_STATE		(1 << PAD_CFG0_RX_STATE_BIT)
+#define PAD_CFG0_TX_DISABLE		(1 << 8)
+#define PAD_CFG0_RX_DISABLE		(1 << 9)
+
+#define PAD_CFG0_MODE_SHIFT		10
+#define PAD_CFG0_MODE_MASK		(7 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_GPIO		(0 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF1		(1 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF2		(2 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF3		(3 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF4		(4 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF5		(5 << PAD_CFG0_MODE_SHIFT)
+#define  PAD_CFG0_MODE_NF6		(6 << PAD_CFG0_MODE_SHIFT)
+
+#define PAD_CFG0_ROUTE_MASK		(0xf << 17)
+#define  PAD_CFG0_ROUTE_NMI		(1 << 17)
+#define  PAD_CFG0_ROUTE_SMI		(1 << 18)
+#define  PAD_CFG0_ROUTE_SCI		(1 << 19)
+#define  PAD_CFG0_ROUTE_IOAPIC		(1 << 20)
+#define PAD_CFG0_RXTENCFG_MASK		(3 << 21)
+#define PAD_CFG0_RXINV_MASK		(1 << 23)
+#define  PAD_CFG0_RX_POL_INVERT		(1 << 23)
+#define  PAD_CFG0_RX_POL_NONE		(0 << 23)
+#define  PAD_CFG0_PREGFRXSEL		(1 << 24)
+#define PAD_CFG0_TRIG_MASK		(3 << 25)
+#define  PAD_CFG0_TRIG_LEVEL		(0 << 25)
+#define  PAD_CFG0_TRIG_EDGE_SINGLE	(1 << 25) /* controlled by RX_INVERT*/
+#define  PAD_CFG0_TRIG_OFF		(2 << 25)
+#define  PAD_CFG0_TRIG_EDGE_BOTH	(3 << 25)
+#define PAD_CFG0_RXRAW1_MASK		(1 << 28)
+#define PAD_CFG0_RXPADSTSEL_MASK	(1 << 29)
+#define PAD_CFG0_RESET_MASK		(3 << 30)
+#define  PAD_CFG0_LOGICAL_RESET_PWROK	(0U << 30)
+#define  PAD_CFG0_LOGICAL_RESET_DEEP	(1U << 30)
+#define  PAD_CFG0_LOGICAL_RESET_PLTRST	(2U << 30)
+#define  PAD_CFG0_LOGICAL_RESET_RSMRST	(3U << 30)
+
+/*
+ * Use the fourth bit in IntSel field to indicate gpio ownership. This field is
+ * RO and hence not used during gpio configuration.
+ */
+#define PAD_CFG1_GPIO_DRIVER		(0x1 << 4)
+#define PAD_CFG1_IRQ_MASK		(0xff << 0)
+#define PAD_CFG1_IOSTERM_MASK		(0x3 << 8)
+#define PAD_CFG1_IOSTERM_SAME		(0x0 << 8)
+#define PAD_CFG1_IOSTERM_DISPUPD	(0x1 << 8)
+#define PAD_CFG1_IOSTERM_ENPD		(0x2 << 8)
+#define PAD_CFG1_IOSTERM_ENPU		(0x3 << 8)
+#define PAD_CFG1_PULL_MASK		(0xf << 10)
+#define  PAD_CFG1_PULL_NONE		(0x0 << 10)
+#define  PAD_CFG1_PULL_DN_5K		(0x2 << 10)
+#define  PAD_CFG1_PULL_DN_20K		(0x4 << 10)
+#define  PAD_CFG1_PULL_UP_1K		(0x9 << 10)
+#define  PAD_CFG1_PULL_UP_5K		(0xa << 10)
+#define  PAD_CFG1_PULL_UP_2K		(0xb << 10)
+#define  PAD_CFG1_PULL_UP_20K		(0xc << 10)
+#define  PAD_CFG1_PULL_UP_667		(0xd << 10)
+#define  PAD_CFG1_PULL_NATIVE		(0xf << 10)
+
+/* Tx enabled driving last value driven, Rx enabled */
+#define PAD_CFG1_IOSSTATE_TX_LAST_RXE	(0x0 << 14)
+/*
+ * Tx enabled driving 0, Rx disabled and Rx driving 0 back to its controller
+ * internally
+ */
+#define PAD_CFG1_IOSSTATE_TX0_RX_DCR_X0	(0x1 << 14)
+/*
+ * Tx enabled driving 0, Rx disabled and Rx driving 1 back to its controller
+ * internally
+ */
+#define PAD_CFG1_IOSSTATE_TX0_RX_DCR_X1	(0x2 << 14)
+/*
+ * Tx enabled driving 1, Rx disabled and Rx driving 0 back to its controller
+ * internally
+ */
+#define PAD_CFG1_IOSSTATE_TX1_RX_DCR_X0	(0x3 << 14)
+/*
+ * Tx enabled driving 1, Rx disabled and Rx driving 1 back to its controller
+ * internally
+ */
+#define PAD_CFG1_IOSSTATE_TX1_RX_DCR_X1	(0x4 << 14)
+/* Tx enabled driving 0, Rx enabled */
+#define PAD_CFG1_IOSSTATE_TX0_RXE	(0x5 << 14)
+/* Tx enabled driving 1, Rx enabled */
+#define PAD_CFG1_IOSSTATE_TX1_RXE	(0x6 << 14)
+/* Hi-Z, Rx driving 0 back to its controller internally */
+#define PAD_CFG1_IOSSTATE_HIZCRX0	(0x7 << 14)
+/* Hi-Z, Rx driving 1 back to its controller internally */
+#define PAD_CFG1_IOSSTATE_HIZCRX1	(0x8 << 14)
+/* Tx disabled, Rx enabled */
+#define PAD_CFG1_IOSSTATE_TXD_RXE	(0x9 << 14)
+#define PAD_CFG1_IOSSTATE_IGNORE	(0xf << 14) /* Ignore Iostandby */
+/* mask to extract Iostandby bits */
+#define PAD_CFG1_IOSSTATE_MASK		(0xf << 14)
+#define PAD_CFG1_IOSSTATE_SHIFT		14 /* set Iostandby bits [17:14] */
+
+#define PAD_CFG2_DEBEN			1
+/* Debounce Duration = (2 ^ PAD_CFG2_DEBOUNCE_x_RTC) * RTC clock duration */
+#define PAD_CFG2_DEBOUNCE_8_RTC		(0x3 << 1)
+#define PAD_CFG2_DEBOUNCE_16_RTC	(0x4 << 1)
+#define PAD_CFG2_DEBOUNCE_32_RTC	(0x5 << 1)
+#define PAD_CFG2_DEBOUNCE_64_RTC	(0x6 << 1)
+#define PAD_CFG2_DEBOUNCE_128_RTC	(0x7 << 1)
+#define PAD_CFG2_DEBOUNCE_256_RTC	(0x8 << 1)
+#define PAD_CFG2_DEBOUNCE_512_RTC	(0x9 << 1)
+#define PAD_CFG2_DEBOUNCE_1K_RTC	(0xa << 1)
+#define PAD_CFG2_DEBOUNCE_2K_RTC	(0xb << 1)
+#define PAD_CFG2_DEBOUNCE_4K_RTC	(0xc << 1)
+#define PAD_CFG2_DEBOUNCE_8K_RTC	(0xd << 1)
+#define PAD_CFG2_DEBOUNCE_16K_RTC	(0xe << 1)
+#define PAD_CFG2_DEBOUNCE_32K_RTC	(0xf << 1)
+#define PAD_CFG2_DEBOUNCE_MASK		0x1f
+
+/* voltage tolerance  0=3.3V default 1=1.8V tolerant */
+#if IS_ENABLED(INTEL_COMMON_GPIO_IOSTANDBY)
+#define PAD_CFG1_TOL_MASK		(0x1 << 25)
+#define  PAD_CFG1_TOL_1V8		(0x1 << 25)
+#endif
+
+#define PAD_FUNC(value)		PAD_CFG0_MODE_##value
+#define PAD_RESET(value)	PAD_CFG0_LOGICAL_RESET_##value
+#define PAD_PULL(value)		PAD_CFG1_PULL_##value
+
+#define PAD_IOSSTATE(value)	PAD_CFG1_IOSSTATE_##value
+#define PAD_IOSTERM(value)	PAD_CFG1_IOSTERM_##value
+
+#define PAD_IRQ_CFG(route, trig, inv) \
+				(PAD_CFG0_ROUTE_##route | \
+				PAD_CFG0_TRIG_##trig | \
+				PAD_CFG0_RX_POL_##inv)
+
+#if IS_ENABLED(INTEL_GPIO_DUAL_ROUTE_SUPPORT)
+#define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv)  \
+				(PAD_CFG0_ROUTE_##route1 | \
+				PAD_CFG0_ROUTE_##route2 | \
+				PAD_CFG0_TRIG_##trig | \
+				PAD_CFG0_RX_POL_##inv)
+#endif /* CONFIG_INTEL_GPIO_DUAL_ROUTE_SUPPORT */
+
+#define _PAD_CFG_STRUCT(__pad, __config0, __config1)	\
+		__pad(__config0) (__config1)
+
+#if GPIO_NUM_PAD_CFG_REGS > 2
+#define _PAD_CFG_STRUCT_3(__pad, __config0, __config1, __config2)	\
+	{					\
+		.pad = __pad,			\
+		.pad_config[0] = __config0,	\
+		.pad_config[1] = __config1,	\
+		.pad_config[2] = __config2,	\
+	}
+#else
+#define _PAD_CFG_STRUCT_3(__pad, __config0, __config1, __config2)	\
+	_PAD_CFG_STRUCT(__pad, __config0, __config1)
+#endif
+
+/* Native function configuration */
+#define PAD_CFG_NF(pad, pull, rst, func) \
+	_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TX_LAST_RXE))
+
+#if IS_ENABLED(CONFIG_INTEL_GPIO_PADCFG_PADTOL)
+/*
+ * Native 1.8V tolerant pad, only applies to some pads like I2C/I2S. Not
+ * applicable to all SOCs. Refer EDS.
+ */
+#define PAD_CFG_NF_1V8(pad, pull, rst, func) \
+	_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) |\
+		PAD_IOSSTATE(TX_LAST_RXE) | PAD_CFG1_TOL_1V8)
+#endif
+
+/* Native function configuration for standby state */
+#define PAD_CFG_NF_IOSSTATE(pad, pull, rst, func, iosstate) \
+	_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+		PAD_IOSSTATE(iosstate))
+
+/*
+ * Native function configuration for standby state, also configuring iostandby
+ * as masked
+ */
+#define PAD_CFG_NF_IOSTANDBY_IGNORE(pad, pull, rst, func) \
+	_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+		PAD_IOSSTATE(IGNORE))
+
+/*
+ * Native function configuration for standby state, also configuring iosstate
+ * and iosterm
+ */
+#define PAD_CFG_NF_IOSSTATE_IOSTERM(pad, pull, rst, func, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+/* General purpose output, no pullup/down */
+#define PAD_CFG_GPO(pad, val, rst)	\
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+		PAD_PULL(NONE) | PAD_IOSSTATE(TX_LAST_RXE))
+
+/* General purpose output, with termination specified */
+#define PAD_CFG_TERM_GPO(pad, val, pull, rst)	\
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+		PAD_PULL(pull) | PAD_IOSSTATE(TX_LAST_RXE))
+
+/* General purpose output, no pullup/down */
+#define PAD_CFG_GPO_GPIO_DRIVER(pad, val, rst, pull)	\
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+		PAD_PULL(pull) | PAD_IOSSTATE(TX_LAST_RXE) | \
+			PAD_CFG1_GPIO_DRIVER)
+
+/* General purpose output */
+#define PAD_CFG_GPO_IOSSTATE_IOSTERM(pad, val, rst, pull, iosstate, ioterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+		PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(ioterm))
+
+/* General purpose input */
+#define PAD_CFG_GPI(pad, pull, rst) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
+		PAD_PULL(pull) | PAD_IOSSTATE(TXD_RXE))
+
+/* General purpose input. The following macro sets the
+ * Host Software Pad Ownership to GPIO Driver mode.
+ */
+#define PAD_CFG_GPI_GPIO_DRIVER(pad, pull, rst) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
+		PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TXD_RXE))
+
+#define PAD_CFG_GPIO_DRIVER_HI_Z(pad, pull, rst, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE |	\
+		PAD_CFG0_RX_DISABLE,					\
+		PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER |			\
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+#define PAD_CFG_GPIO_HI_Z(pad, pull, rst, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE |	\
+		PAD_CFG0_RX_DISABLE, PAD_PULL(pull) |			\
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+/* GPIO Interrupt */
+#define PAD_CFG_GPI_INT(pad, pull, rst, trig) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE |	\
+			PAD_CFG0_TRIG_##trig | PAD_CFG0_RX_POL_NONE,	\
+		PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TXD_RXE))
+
+/*
+ * No Connect configuration for unused pad.
+ * Both TX and RX are disabled. RX disabling is done to avoid unnecessary
+ * setting of GPI_STS.
+ */
+#define PAD_NC(pad, pull)			\
+	_PAD_CFG_STRUCT(pad,					\
+		PAD_FUNC(GPIO) | PAD_RESET(DEEP) |		\
+		PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE,	\
+		PAD_PULL(pull) | PAD_IOSSTATE(TXD_RXE))
+
+/* General purpose input, routed to APIC */
+#define PAD_CFG_GPI_APIC(pad, pull, rst, trig, inv) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TXD_RXE))
+
+/* General purpose input, routed to APIC - with IOStandby Config*/
+#define PAD_CFG_GPI_APIC_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+/*
+ * The following APIC macros assume the APIC will handle the filtering
+ * on its own end. One just needs to pass an active high message into the
+ * ITSS.
+ */
+#define PAD_CFG_GPI_APIC_LOW(pad, pull, rst) \
+	PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, INVERT)
+
+#define PAD_CFG_GPI_APIC_HIGH(pad, pull, rst) \
+	PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, NONE)
+
+#define PAD_CFG_GPI_APIC_EDGE_LOW(pad, pull, rst) \
+	PAD_CFG_GPI_APIC(pad, pull, rst, EDGE_SINGLE, INVERT)
+
+/* General purpose input, routed to SMI */
+#define PAD_CFG_GPI_SMI(pad, pull, rst, trig, inv) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TXD_RXE))
+
+/* General purpose input, routed to SMI */
+#define PAD_CFG_GPI_SMI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+#define PAD_CFG_GPI_SMI_LOW(pad, pull, rst, trig) \
+	PAD_CFG_GPI_SMI(pad, pull, rst, trig, INVERT)
+
+#define PAD_CFG_GPI_SMI_HIGH(pad, pull, rst, trig) \
+	PAD_CFG_GPI_SMI(pad, pull, rst, trig, NONE)
+
+/* General purpose input, routed to SCI */
+#define PAD_CFG_GPI_SCI(pad, pull, rst, trig, inv) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TXD_RXE))
+
+/* General purpose input, routed to SCI */
+#define PAD_CFG_GPI_SCI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+#define PAD_CFG_GPI_SCI_LOW(pad, pull, rst, trig) \
+	PAD_CFG_GPI_SCI(pad, pull, rst, trig, INVERT)
+
+#define PAD_CFG_GPI_SCI_HIGH(pad, pull, rst, trig) \
+	PAD_CFG_GPI_SCI(pad, pull, rst, trig, NONE)
+
+#define PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, inv, dur) \
+	_PAD_CFG_STRUCT_3(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TXD_RXE), PAD_CFG2_DEBEN | PAD_CFG2_##dur)
+
+#define PAD_CFG_GPI_SCI_LOW_DEBEN(pad, pull, rst, trig, dur) \
+	PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, INVERT, dur)
+
+#define PAD_CFG_GPI_SCI_HIGH_DEBEN(pad, pull, rst, trig, dur) \
+	PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, NONE, dur)
+
+/* General purpose input, routed to NMI */
+#define PAD_CFG_GPI_NMI(pad, pull, rst, trig, inv) \
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \
+		PAD_IOSSTATE(TXD_RXE))
+
+#if IS_ENABLED(INTEL_GPIO_DUAL_ROUTE_SUPPORT)
+/* GPI, GPIO Driver, SCI interrupt */
+#define PAD_CFG_GPI_GPIO_DRIVER_SCI(pad, pull, rst, trig, inv)	\
+	_PAD_CFG_STRUCT(pad,		\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+			PAD_IRQ_CFG(SCI, trig, inv),	\
+		PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TXD_RXE))
+
+#define PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, route1, route2) \
+	_PAD_CFG_STRUCT(pad,						\
+		PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+		PAD_IRQ_CFG_DUAL_ROUTE(route1, route2,  trig, inv), \
+		PAD_PULL(pull) | PAD_IOSSTATE(TXD_RXE))
+
+#define PAD_CFG_GPI_IRQ_WAKE(pad, pull, rst, trig, inv)	\
+	PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, IOAPIC, SCI)
+
+#endif /* CONFIG_INTEL_GPIO_DUAL_ROUTE_SUPPORT */
+
+#endif /* _ASM_ARCH_GPIO_DEFS_H_ */
