[v2,01/49] dt: bindings: net: add qcom,ath11k.yaml
diff mbox series

Message ID 1571565847-10338-2-git-send-email-kvalo@codeaurora.org
State Changes Requested
Headers show
Series
  • ath11k: driver for Qualcomm IEEE 802.11ax devices
Related show

Checks

Context Check Description
robh/dt-meta-schema fail build log
robh/checkpatch success

Commit Message

Kalle Valo Oct. 20, 2019, 10:03 a.m. UTC
ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a
bindings document for the driver, first documenting IPQ8074 which is the
only device ath11k currently supports.

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 .../bindings/net/wireless/qcom,ath11k.yaml         | 277 +++++++++++++++++++++
 1 file changed, 277 insertions(+)

Comments

Rob Herring Oct. 25, 2019, 9:30 p.m. UTC | #1
On Sun, Oct 20, 2019 at 01:03:19PM +0300, Kalle Valo wrote:
> ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a
> bindings document for the driver, first documenting IPQ8074 which is the
> only device ath11k currently supports.
> 
> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
> ---
>  .../bindings/net/wireless/qcom,ath11k.yaml         | 277 +++++++++++++++++++++
>  1 file changed, 277 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> new file mode 100644
> index 000000000000..5d25542f85f8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> @@ -0,0 +1,277 @@
> +# SPDX-License-Identifier: BSD-3-Clause-Clear

(GPL-2.0-only OR BSD-2-Clause) please.

> +# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies ath11k wireless devices Generic Binding
> +
> +maintainers:
> +  - Kalle Valo <kvalo@codeaurora.org>
> +
> +description: |
> +  These are dt entries used on ath11k driver. AHB based ipq8074 uses most of the properties defined in this doc.

Describe the h/w, not what the document is.

Wrap your lines.

> +
> +properties:
> +  compatible:
> +    const: "qcom,ipq8074-wifi"

Drop quotes.

> +
> +  reg:
> +    description: Address and length of the register set for the device

Don't need a description.

> +    maxItems: 1
> +
> +  interrupts:
> +    minItems: 53
> +    maxItems: 53

Assuming the list below has 53 entries min/maxItems is implied.

> +    items:
> +      - description: misc-pulse1 interrupt events
> +      - description: misc-latch interrupt events
> +      - description: sw exception interrupt events
> +      - description: watchdog interrupt events
> +      - description: interrupt event for ring CE0
> +      - description: interrupt event for ring CE1
> +      - description: interrupt event for ring CE2
> +      - description: interrupt event for ring CE3
> +      - description: interrupt event for ring CE4
> +      - description: interrupt event for ring CE5
> +      - description: interrupt event for ring CE6
> +      - description: interrupt event for ring CE7
> +      - description: interrupt event for ring CE8
> +      - description: interrupt event for ring CE9
> +      - description: interrupt event for ring CE10
> +      - description: interrupt event for ring CE11
> +      - description: interrupt event for ring host2wbm-desc-feed
> +      - description: interrupt event for ring host2reo-re-injection
> +      - description: interrupt event for ring host2reo-command
> +      - description: interrupt event for ring host2rxdma-monitor-ring3
> +      - description: interrupt event for ring host2rxdma-monitor-ring2
> +      - description: interrupt event for ring host2rxdma-monitor-ring1
> +      - description: interrupt event for ring reo2ost-exception
> +      - description: interrupt event for ring wbm2host-rx-release
> +      - description: interrupt event for ring reo2host-status
> +      - description: interrupt event for ring reo2host-destination-ring4
> +      - description: interrupt event for ring reo2host-destination-ring3
> +      - description: interrupt event for ring reo2host-destination-ring2
> +      - description: interrupt event for ring reo2host-destination-ring1
> +      - description: interrupt event for ring rxdma2host-monitor-destination-mac3
> +      - description: interrupt event for ring rxdma2host-monitor-destination-mac2
> +      - description: interrupt event for ring rxdma2host-monitor-destination-mac1
> +      - description: interrupt event for ring ppdu-end-interrupts-mac3
> +      - description: interrupt event for ring ppdu-end-interrupts-mac2
> +      - description: interrupt event for ring ppdu-end-interrupts-mac1
> +      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
> +      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
> +      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
> +      - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
> +      - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
> +      - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
> +      - description: interrupt event for ring rxdma2host-destination-ring-mac3
> +      - description: interrupt event for ring rxdma2host-destination-ring-mac2
> +      - description: interrupt event for ring rxdma2host-destination-ring-mac1
> +      - description: interrupt event for ring host2tcl-input-ring4
> +      - description: interrupt event for ring host2tcl-input-ring3
> +      - description: interrupt event for ring host2tcl-input-ring2
> +      - description: interrupt event for ring host2tcl-input-ring1
> +      - description: interrupt event for ring wbm2host-tx-completions-ring3
> +      - description: interrupt event for ring wbm2host-tx-completions-ring2
> +      - description: interrupt event for ring wbm2host-tx-completions-ring1
> +      - description: interrupt event for ring tcl2host-status-ring
> +
> +
> +  interrupt-names:
> +    minItems: 53
> +    maxItems: 53
> +    items:
> +      - const: misc-pulse1
> +      - const: misc-latch
> +      - const: sw-exception
> +      - const: watchdog
> +      - const: ce0
> +      - const: ce1
> +      - const: ce2
> +      - const: ce3
> +      - const: ce4
> +      - const: ce5
> +      - const: ce6
> +      - const: ce7
> +      - const: ce8
> +      - const: ce9
> +      - const: ce10
> +      - const: ce11
> +      - const: host2wbm-desc-feed
> +      - const: host2reo-re-injection
> +      - const: host2reo-command
> +      - const: host2rxdma-monitor-ring3
> +      - const: host2rxdma-monitor-ring2
> +      - const: host2rxdma-monitor-ring1
> +      - const: reo2ost-exception
> +      - const: wbm2host-rx-release
> +      - const: reo2host-status
> +      - const: reo2host-destination-ring4
> +      - const: reo2host-destination-ring3
> +      - const: reo2host-destination-ring2
> +      - const: reo2host-destination-ring1
> +      - const: rxdma2host-monitor-destination-mac3
> +      - const: rxdma2host-monitor-destination-mac2
> +      - const: rxdma2host-monitor-destination-mac1
> +      - const: ppdu-end-interrupts-mac3
> +      - const: ppdu-end-interrupts-mac2
> +      - const: ppdu-end-interrupts-mac1
> +      - const: rxdma2host-monitor-status-ring-mac3
> +      - const: rxdma2host-monitor-status-ring-mac2
> +      - const: rxdma2host-monitor-status-ring-mac1
> +      - const: host2rxdma-host-buf-ring-mac3
> +      - const: host2rxdma-host-buf-ring-mac2
> +      - const: host2rxdma-host-buf-ring-mac1
> +      - const: rxdma2host-destination-ring-mac3
> +      - const: rxdma2host-destination-ring-mac2
> +      - const: rxdma2host-destination-ring-mac1
> +      - const: host2tcl-input-ring4
> +      - const: host2tcl-input-ring3
> +      - const: host2tcl-input-ring2
> +      - const: host2tcl-input-ring1
> +      - const: wbm2host-tx-completions-ring3
> +      - const: wbm2host-tx-completions-ring2
> +      - const: wbm2host-tx-completions-ring1
> +      - const: tcl2host-status-ring
> +
> +  qcom,rproc:
> +    $ref: /schemas/types.yaml#definitions/phandle
> +    description:
> +      DT entry of q6v5-wcss remoteproc driver.
> +      Phandle to a node that can contain the following properties
> +        * compatible
> +        * reg
> +        * reg-names
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +  - qcom,rproc
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +
> +    q6v5_wcss: q6v5_wcss@CD00000 {
> +    	compatible = "qcom,ipq8074-wcss-pil";
> +    	reg = <0xCD00000 0x4040>,
> +    	      <0x4AB000 0x20>;
> +    	reg-names = "qdsp6",
> +    		    "rmb";

Mixed tabs and spaces. YAML needs spaces (at least at the beginning), so 
just use spaces. More below...

> +    };
> +
> +    wifi0: wifi@c000000 {
> +        	compatible = "qcom,ipq8074-wifi";
> +    	reg = <0xc000000 0x2000000>;
> +    	interrupts = <0 320 1>,
> +    		     <0 319 1>,
> +    		     <0 318 1>,
> +    		     <0 317 1>,
> +    		     <0 316 1>,
> +    		     <0 315 1>,
> +    		     <0 314 1>,
> +    		     <0 311 1>,
> +    		     <0 310 1>,
> +    		     <0 411 1>,
> +    		     <0 410 1>,
> +    		     <0 40 1>,
> +    		     <0 39 1>,
> +    		     <0 302 1>,
> +    		     <0 301 1>,
> +    		     <0 37 1>,
> +    		     <0 36 1>,
> +    		     <0 296 1>,
> +    		     <0 295 1>,
> +    		     <0 294 1>,
> +    		     <0 293 1>,
> +    		     <0 292 1>,
> +    		     <0 291 1>,
> +    		     <0 290 1>,
> +    		     <0 289 1>,
> +    		     <0 288 1>,
> +    		     <0 239 1>,
> +    		     <0 236 1>,
> +    		     <0 235 1>,
> +    		     <0 234 1>,
> +    		     <0 233 1>,
> +    		     <0 232 1>,
> +    		     <0 231 1>,
> +    		     <0 230 1>,
> +    		     <0 229 1>,
> +    		     <0 228 1>,
> +    		     <0 224 1>,
> +    		     <0 223 1>,
> +    		     <0 203 1>,
> +    		     <0 183 1>,
> +    		     <0 180 1>,
> +    		     <0 179 1>,
> +    		     <0 178 1>,
> +    		     <0 177 1>,
> +    		     <0 176 1>,
> +    		     <0 163 1>,
> +    		     <0 162 1>,
> +    		     <0 160 1>,
> +    		     <0 159 1>,
> +    		     <0 158 1>,
> +    		     <0 157 1>,
> +    		     <0 156 1>;
> +    	interrupt-names = "misc-pulse1",
> +    			  "misc-latch",
> +    			  "sw-exception",
> +    			  "watchdog",
> +    			  "ce0",
> +    			  "ce1",
> +    			  "ce2",
> +    			  "ce3",
> +    			  "ce4",
> +    			  "ce5",
> +    			  "ce6",
> +    			  "ce7",
> +    			  "ce8",
> +    			  "ce9",
> +    			  "ce10",
> +    			  "ce11",
> +    			  "host2wbm-desc-feed",
> +    			  "host2reo-re-injection",
> +    			  "host2reo-command",
> +    			  "host2rxdma-monitor-ring3",
> +    			  "host2rxdma-monitor-ring2",
> +    			  "host2rxdma-monitor-ring1",
> +    			  "reo2ost-exception",
> +    			  "wbm2host-rx-release",
> +    			  "reo2host-status",
> +    			  "reo2host-destination-ring4",
> +    			  "reo2host-destination-ring3",
> +    			  "reo2host-destination-ring2",
> +    			  "reo2host-destination-ring1",
> +    			  "rxdma2host-monitor-destination-mac3",
> +    			  "rxdma2host-monitor-destination-mac2",
> +    			  "rxdma2host-monitor-destination-mac1",
> +    			  "ppdu-end-interrupts-mac3",
> +    			  "ppdu-end-interrupts-mac2",
> +    			  "ppdu-end-interrupts-mac1",
> +    			  "rxdma2host-monitor-status-ring-mac3",
> +    			  "rxdma2host-monitor-status-ring-mac2",
> +    			  "rxdma2host-monitor-status-ring-mac1",
> +    			  "host2rxdma-host-buf-ring-mac3",
> +    			  "host2rxdma-host-buf-ring-mac2",
> +    			  "host2rxdma-host-buf-ring-mac1",
> +    			  "rxdma2host-destination-ring-mac3",
> +    			  "rxdma2host-destination-ring-mac2",
> +    			  "rxdma2host-destination-ring-mac1",
> +    			  "host2tcl-input-ring4",
> +    			  "host2tcl-input-ring3",
> +    			  "host2tcl-input-ring2",
> +    			  "host2tcl-input-ring1",
> +    			  "wbm2host-tx-completions-ring3",
> +    			  "wbm2host-tx-completions-ring2",
> +    			  "wbm2host-tx-completions-ring1",
> +    			  "tcl2host-status-ring";
> +    	qcom,rproc = <&q6v5_wcss>;
> +    };
>
Kalle Valo Oct. 27, 2019, 1:28 p.m. UTC | #2
Rob Herring <robh@kernel.org> writes:

> On Sun, Oct 20, 2019 at 01:03:19PM +0300, Kalle Valo wrote:
>> ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a
>> bindings document for the driver, first documenting IPQ8074 which is the
>> only device ath11k currently supports.
>> 
>> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
>> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
>> ---
>>  .../bindings/net/wireless/qcom,ath11k.yaml         | 277 +++++++++++++++++++++
>>  1 file changed, 277 insertions(+)
>> 
>> diff --git
>> a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
>> b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
>> new file mode 100644
>> index 000000000000..5d25542f85f8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
>> @@ -0,0 +1,277 @@
>> +# SPDX-License-Identifier: BSD-3-Clause-Clear
>
> (GPL-2.0-only OR BSD-2-Clause) please.

I chose BSD-3-Clause-Clear because ath11k uses that license and I would
prefer to use the same license throughout the driver. Also it's
categorised as a preferred license:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/LICENSES/preferred

Any specific reason why you want to change the license?

>> +# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
>> +
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Technologies ath11k wireless devices Generic Binding
>> +
>> +maintainers:
>> +  - Kalle Valo <kvalo@codeaurora.org>
>> +
>> +description: |
>> + These are dt entries used on ath11k driver. AHB based ipq8074 uses
>> most of the properties defined in this doc.
>
> Describe the h/w, not what the document is.
>
> Wrap your lines.
>
>> +
>> +properties:
>> +  compatible:
>> +    const: "qcom,ipq8074-wifi"
>
> Drop quotes.
>
>> +
>> +  reg:
>> +    description: Address and length of the register set for the device
>
> Don't need a description.
>
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    minItems: 53
>> +    maxItems: 53
>
> Assuming the list below has 53 entries min/maxItems is implied.

Will fix these.

>> +examples:
>> +  - |
>> +
>> +    q6v5_wcss: q6v5_wcss@CD00000 {
>> +    	compatible = "qcom,ipq8074-wcss-pil";
>> +    	reg = <0xCD00000 0x4040>,
>> +    	      <0x4AB000 0x20>;
>> +    	reg-names = "qdsp6",
>> +    		    "rmb";
>
> Mixed tabs and spaces. YAML needs spaces (at least at the beginning), so 
> just use spaces. More below...

Ok, I'll remove all the tabs from the doc. Thanks for the review!
Rob Herring Oct. 27, 2019, 8:56 p.m. UTC | #3
On Sun, Oct 27, 2019 at 8:28 AM Kalle Valo <kvalo@codeaurora.org> wrote:
>
> Rob Herring <robh@kernel.org> writes:
>
> > On Sun, Oct 20, 2019 at 01:03:19PM +0300, Kalle Valo wrote:
> >> ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a
> >> bindings document for the driver, first documenting IPQ8074 which is the
> >> only device ath11k currently supports.
> >>
> >> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
> >> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
> >> ---
> >>  .../bindings/net/wireless/qcom,ath11k.yaml         | 277 +++++++++++++++++++++
> >>  1 file changed, 277 insertions(+)
> >>
> >> diff --git
> >> a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> >> b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> >> new file mode 100644
> >> index 000000000000..5d25542f85f8
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> >> @@ -0,0 +1,277 @@
> >> +# SPDX-License-Identifier: BSD-3-Clause-Clear
> >
> > (GPL-2.0-only OR BSD-2-Clause) please.
>
> I chose BSD-3-Clause-Clear because ath11k uses that license and I would
> prefer to use the same license throughout the driver.

The schema is not the driver.

> Also it's
> categorised as a preferred license:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/LICENSES/preferred

So are the 2 I listed. (GPL-2.0 is the deprecated version of GPL-2.0-only).

> Any specific reason why you want to change the license?

So that we have some sort of consistency between schemas. It's been a
free-for-all for licensing dts files, headers and bindings til now,
and I'm trying to address some of that as we add schema.

Rob
Kalle Valo Nov. 5, 2019, 2:55 p.m. UTC | #4
Rob Herring <robh@kernel.org> writes:

> On Sun, Oct 27, 2019 at 8:28 AM Kalle Valo <kvalo@codeaurora.org> wrote:
>>
>> Rob Herring <robh@kernel.org> writes:
>>
>> > On Sun, Oct 20, 2019 at 01:03:19PM +0300, Kalle Valo wrote:
>> >> ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a
>> >> bindings document for the driver, first documenting IPQ8074 which is the
>> >> only device ath11k currently supports.
>> >>
>> >> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
>> >> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
>> >> ---
>> >>  .../bindings/net/wireless/qcom,ath11k.yaml         | 277 +++++++++++++++++++++
>> >>  1 file changed, 277 insertions(+)
>> >>
>> >> diff --git
>> >> a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
>> >> b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
>> >> new file mode 100644
>> >> index 000000000000..5d25542f85f8
>> >> --- /dev/null
>> >> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
>> >> @@ -0,0 +1,277 @@
>> >> +# SPDX-License-Identifier: BSD-3-Clause-Clear
>> >
>> > (GPL-2.0-only OR BSD-2-Clause) please.
>>
>> I chose BSD-3-Clause-Clear because ath11k uses that license and I would
>> prefer to use the same license throughout the driver.
>
> The schema is not the driver.
>
>> Also it's
>> categorised as a preferred license:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/LICENSES/preferred
>
> So are the 2 I listed. (GPL-2.0 is the deprecated version of GPL-2.0-only).
>
>> Any specific reason why you want to change the license?
>
> So that we have some sort of consistency between schemas. It's been a
> free-for-all for licensing dts files, headers and bindings til now,
> and I'm trying to address some of that as we add schema.

Yeah, makes sense. I'll change the license in the next version. Thanks
for the review.
Kalle Valo Nov. 7, 2019, 3:38 p.m. UTC | #5
Rob Herring <robh@kernel.org> writes:

> On Sun, Oct 20, 2019 at 01:03:19PM +0300, Kalle Valo wrote:
>> ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a
>> bindings document for the driver, first documenting IPQ8074 which is the
>> only device ath11k currently supports.
>> 
>> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
>> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

[...]

>> +  interrupts:
>> +    minItems: 53
>> +    maxItems: 53
>
> Assuming the list below has 53 entries min/maxItems is implied.

There's actually 52 entries in the items list below this, I need to
check if we are missing an entry or is this just a miscalculation.

>> +  interrupt-names:
>> +    minItems: 53
>> +    maxItems: 53

And I assume I can remove minItems and maxItems here as well.

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
new file mode 100644
index 000000000000..5d25542f85f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -0,0 +1,277 @@ 
+# SPDX-License-Identifier: BSD-3-Clause-Clear
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath11k wireless devices Generic Binding
+
+maintainers:
+  - Kalle Valo <kvalo@codeaurora.org>
+
+description: |
+  These are dt entries used on ath11k driver. AHB based ipq8074 uses most of the properties defined in this doc.
+
+properties:
+  compatible:
+    const: "qcom,ipq8074-wifi"
+
+  reg:
+    description: Address and length of the register set for the device
+    maxItems: 1
+
+  interrupts:
+    minItems: 53
+    maxItems: 53
+    items:
+      - description: misc-pulse1 interrupt events
+      - description: misc-latch interrupt events
+      - description: sw exception interrupt events
+      - description: watchdog interrupt events
+      - description: interrupt event for ring CE0
+      - description: interrupt event for ring CE1
+      - description: interrupt event for ring CE2
+      - description: interrupt event for ring CE3
+      - description: interrupt event for ring CE4
+      - description: interrupt event for ring CE5
+      - description: interrupt event for ring CE6
+      - description: interrupt event for ring CE7
+      - description: interrupt event for ring CE8
+      - description: interrupt event for ring CE9
+      - description: interrupt event for ring CE10
+      - description: interrupt event for ring CE11
+      - description: interrupt event for ring host2wbm-desc-feed
+      - description: interrupt event for ring host2reo-re-injection
+      - description: interrupt event for ring host2reo-command
+      - description: interrupt event for ring host2rxdma-monitor-ring3
+      - description: interrupt event for ring host2rxdma-monitor-ring2
+      - description: interrupt event for ring host2rxdma-monitor-ring1
+      - description: interrupt event for ring reo2ost-exception
+      - description: interrupt event for ring wbm2host-rx-release
+      - description: interrupt event for ring reo2host-status
+      - description: interrupt event for ring reo2host-destination-ring4
+      - description: interrupt event for ring reo2host-destination-ring3
+      - description: interrupt event for ring reo2host-destination-ring2
+      - description: interrupt event for ring reo2host-destination-ring1
+      - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+      - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+      - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+      - description: interrupt event for ring ppdu-end-interrupts-mac3
+      - description: interrupt event for ring ppdu-end-interrupts-mac2
+      - description: interrupt event for ring ppdu-end-interrupts-mac1
+      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
+      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
+      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
+      - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+      - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+      - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+      - description: interrupt event for ring rxdma2host-destination-ring-mac3
+      - description: interrupt event for ring rxdma2host-destination-ring-mac2
+      - description: interrupt event for ring rxdma2host-destination-ring-mac1
+      - description: interrupt event for ring host2tcl-input-ring4
+      - description: interrupt event for ring host2tcl-input-ring3
+      - description: interrupt event for ring host2tcl-input-ring2
+      - description: interrupt event for ring host2tcl-input-ring1
+      - description: interrupt event for ring wbm2host-tx-completions-ring3
+      - description: interrupt event for ring wbm2host-tx-completions-ring2
+      - description: interrupt event for ring wbm2host-tx-completions-ring1
+      - description: interrupt event for ring tcl2host-status-ring
+
+
+  interrupt-names:
+    minItems: 53
+    maxItems: 53
+    items:
+      - const: misc-pulse1
+      - const: misc-latch
+      - const: sw-exception
+      - const: watchdog
+      - const: ce0
+      - const: ce1
+      - const: ce2
+      - const: ce3
+      - const: ce4
+      - const: ce5
+      - const: ce6
+      - const: ce7
+      - const: ce8
+      - const: ce9
+      - const: ce10
+      - const: ce11
+      - const: host2wbm-desc-feed
+      - const: host2reo-re-injection
+      - const: host2reo-command
+      - const: host2rxdma-monitor-ring3
+      - const: host2rxdma-monitor-ring2
+      - const: host2rxdma-monitor-ring1
+      - const: reo2ost-exception
+      - const: wbm2host-rx-release
+      - const: reo2host-status
+      - const: reo2host-destination-ring4
+      - const: reo2host-destination-ring3
+      - const: reo2host-destination-ring2
+      - const: reo2host-destination-ring1
+      - const: rxdma2host-monitor-destination-mac3
+      - const: rxdma2host-monitor-destination-mac2
+      - const: rxdma2host-monitor-destination-mac1
+      - const: ppdu-end-interrupts-mac3
+      - const: ppdu-end-interrupts-mac2
+      - const: ppdu-end-interrupts-mac1
+      - const: rxdma2host-monitor-status-ring-mac3
+      - const: rxdma2host-monitor-status-ring-mac2
+      - const: rxdma2host-monitor-status-ring-mac1
+      - const: host2rxdma-host-buf-ring-mac3
+      - const: host2rxdma-host-buf-ring-mac2
+      - const: host2rxdma-host-buf-ring-mac1
+      - const: rxdma2host-destination-ring-mac3
+      - const: rxdma2host-destination-ring-mac2
+      - const: rxdma2host-destination-ring-mac1
+      - const: host2tcl-input-ring4
+      - const: host2tcl-input-ring3
+      - const: host2tcl-input-ring2
+      - const: host2tcl-input-ring1
+      - const: wbm2host-tx-completions-ring3
+      - const: wbm2host-tx-completions-ring2
+      - const: wbm2host-tx-completions-ring1
+      - const: tcl2host-status-ring
+
+  qcom,rproc:
+    $ref: /schemas/types.yaml#definitions/phandle
+    description:
+      DT entry of q6v5-wcss remoteproc driver.
+      Phandle to a node that can contain the following properties
+        * compatible
+        * reg
+        * reg-names
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - qcom,rproc
+
+additionalProperties: false
+
+examples:
+  - |
+
+    q6v5_wcss: q6v5_wcss@CD00000 {
+    	compatible = "qcom,ipq8074-wcss-pil";
+    	reg = <0xCD00000 0x4040>,
+    	      <0x4AB000 0x20>;
+    	reg-names = "qdsp6",
+    		    "rmb";
+    };
+
+    wifi0: wifi@c000000 {
+        	compatible = "qcom,ipq8074-wifi";
+    	reg = <0xc000000 0x2000000>;
+    	interrupts = <0 320 1>,
+    		     <0 319 1>,
+    		     <0 318 1>,
+    		     <0 317 1>,
+    		     <0 316 1>,
+    		     <0 315 1>,
+    		     <0 314 1>,
+    		     <0 311 1>,
+    		     <0 310 1>,
+    		     <0 411 1>,
+    		     <0 410 1>,
+    		     <0 40 1>,
+    		     <0 39 1>,
+    		     <0 302 1>,
+    		     <0 301 1>,
+    		     <0 37 1>,
+    		     <0 36 1>,
+    		     <0 296 1>,
+    		     <0 295 1>,
+    		     <0 294 1>,
+    		     <0 293 1>,
+    		     <0 292 1>,
+    		     <0 291 1>,
+    		     <0 290 1>,
+    		     <0 289 1>,
+    		     <0 288 1>,
+    		     <0 239 1>,
+    		     <0 236 1>,
+    		     <0 235 1>,
+    		     <0 234 1>,
+    		     <0 233 1>,
+    		     <0 232 1>,
+    		     <0 231 1>,
+    		     <0 230 1>,
+    		     <0 229 1>,
+    		     <0 228 1>,
+    		     <0 224 1>,
+    		     <0 223 1>,
+    		     <0 203 1>,
+    		     <0 183 1>,
+    		     <0 180 1>,
+    		     <0 179 1>,
+    		     <0 178 1>,
+    		     <0 177 1>,
+    		     <0 176 1>,
+    		     <0 163 1>,
+    		     <0 162 1>,
+    		     <0 160 1>,
+    		     <0 159 1>,
+    		     <0 158 1>,
+    		     <0 157 1>,
+    		     <0 156 1>;
+    	interrupt-names = "misc-pulse1",
+    			  "misc-latch",
+    			  "sw-exception",
+    			  "watchdog",
+    			  "ce0",
+    			  "ce1",
+    			  "ce2",
+    			  "ce3",
+    			  "ce4",
+    			  "ce5",
+    			  "ce6",
+    			  "ce7",
+    			  "ce8",
+    			  "ce9",
+    			  "ce10",
+    			  "ce11",
+    			  "host2wbm-desc-feed",
+    			  "host2reo-re-injection",
+    			  "host2reo-command",
+    			  "host2rxdma-monitor-ring3",
+    			  "host2rxdma-monitor-ring2",
+    			  "host2rxdma-monitor-ring1",
+    			  "reo2ost-exception",
+    			  "wbm2host-rx-release",
+    			  "reo2host-status",
+    			  "reo2host-destination-ring4",
+    			  "reo2host-destination-ring3",
+    			  "reo2host-destination-ring2",
+    			  "reo2host-destination-ring1",
+    			  "rxdma2host-monitor-destination-mac3",
+    			  "rxdma2host-monitor-destination-mac2",
+    			  "rxdma2host-monitor-destination-mac1",
+    			  "ppdu-end-interrupts-mac3",
+    			  "ppdu-end-interrupts-mac2",
+    			  "ppdu-end-interrupts-mac1",
+    			  "rxdma2host-monitor-status-ring-mac3",
+    			  "rxdma2host-monitor-status-ring-mac2",
+    			  "rxdma2host-monitor-status-ring-mac1",
+    			  "host2rxdma-host-buf-ring-mac3",
+    			  "host2rxdma-host-buf-ring-mac2",
+    			  "host2rxdma-host-buf-ring-mac1",
+    			  "rxdma2host-destination-ring-mac3",
+    			  "rxdma2host-destination-ring-mac2",
+    			  "rxdma2host-destination-ring-mac1",
+    			  "host2tcl-input-ring4",
+    			  "host2tcl-input-ring3",
+    			  "host2tcl-input-ring2",
+    			  "host2tcl-input-ring1",
+    			  "wbm2host-tx-completions-ring3",
+    			  "wbm2host-tx-completions-ring2",
+    			  "wbm2host-tx-completions-ring1",
+    			  "tcl2host-status-ring";
+    	qcom,rproc = <&q6v5_wcss>;
+    };