@@ -2342,10 +2342,13 @@ struct b53_device *b53_switch_alloc(struct device *base,
struct dsa_switch *ds;
struct b53_device *dev;
- ds = dsa_switch_alloc(base, DSA_MAX_PORTS);
+ ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
if (!ds)
return NULL;
+ ds->dev = base;
+ ds->num_ports = DSA_MAX_PORTS;
+
dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
@@ -286,10 +286,13 @@ static int dsa_loop_drv_probe(struct mdio_device *mdiodev)
dev_info(&mdiodev->dev, "%s: 0x%0x\n",
pdata->name, pdata->enabled_ports);
- ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS);
+ ds = devm_kzalloc(&mdiodev->dev, sizeof(*ds), GFP_KERNEL);
if (!ds)
return -ENOMEM;
+ ds->dev = &mdiodev->dev;
+ ds->num_ports = DSA_MAX_PORTS;
+
ps = devm_kzalloc(&mdiodev->dev, sizeof(*ps), GFP_KERNEL);
if (!ps)
return -ENOMEM;
@@ -1283,10 +1283,12 @@ static int lan9303_register_switch(struct lan9303 *chip)
{
int base;
- chip->ds = dsa_switch_alloc(chip->dev, LAN9303_NUM_PORTS);
+ chip->ds = devm_kzalloc(chip->dev, sizeof(*chip->ds), GFP_KERNEL);
if (!chip->ds)
return -ENOMEM;
+ chip->ds->dev = chip->dev;
+ chip->ds->num_ports = LAN9303_NUM_PORTS;
chip->ds->priv = chip;
chip->ds->ops = &lan9303_switch_ops;
base = chip->phy_addr_base;
@@ -1854,10 +1854,12 @@ static int gswip_probe(struct platform_device *pdev)
if (!priv->hw_info)
return -EINVAL;
- priv->ds = dsa_switch_alloc(dev, priv->hw_info->max_ports);
+ priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
if (!priv->ds)
return -ENOMEM;
+ priv->ds->dev = dev;
+ priv->ds->num_ports = priv->hw_info->max_ports;
priv->ds->priv = priv;
priv->ds->ops = &gswip_switch_ops;
priv->dev = dev;
@@ -398,10 +398,13 @@ struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
struct dsa_switch *ds;
struct ksz_device *swdev;
- ds = dsa_switch_alloc(base, DSA_MAX_PORTS);
+ ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
if (!ds)
return NULL;
+ ds->dev = base;
+ ds->num_ports = DSA_MAX_PORTS;
+
swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL);
if (!swdev)
return NULL;
@@ -1632,10 +1632,13 @@ mt7530_probe(struct mdio_device *mdiodev)
if (!priv)
return -ENOMEM;
- priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS);
+ priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
if (!priv->ds)
return -ENOMEM;
+ priv->ds->dev = &mdiodev->dev;
+ priv->ds->num_ports = DSA_MAX_PORTS;
+
/* Use medatek,mcm property to distinguish hardware type that would
* casues a little bit differences on power-on sequence.
*/
@@ -270,10 +270,12 @@ static int mv88e6060_probe(struct mdio_device *mdiodev)
dev_info(dev, "switch %s detected\n", name);
- ds = dsa_switch_alloc(dev, MV88E6060_PORTS);
+ ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
if (!ds)
return -ENOMEM;
+ ds->dev = dev;
+ ds->num_ports = MV88E6060_PORTS;
ds->priv = priv;
ds->dev = dev;
ds->ops = &mv88e6060_switch_ops;
@@ -4975,10 +4975,12 @@ static int mv88e6xxx_register_switch(struct mv88e6xxx_chip *chip)
struct device *dev = chip->dev;
struct dsa_switch *ds;
- ds = dsa_switch_alloc(dev, mv88e6xxx_num_ports(chip));
+ ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
if (!ds)
return -ENOMEM;
+ ds->dev = dev;
+ ds->num_ports = mv88e6xxx_num_ports(chip);
ds->priv = chip;
ds->dev = dev;
ds->ops = &mv88e6xxx_switch_ops;
@@ -1077,10 +1077,13 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
if (id != QCA8K_ID_QCA8337)
return -ENODEV;
- priv->ds = dsa_switch_alloc(&mdiodev->dev, QCA8K_NUM_PORTS);
+ priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds),
+ QCA8K_NUM_PORTS);
if (!priv->ds)
return -ENOMEM;
+ priv->ds->dev = &mdiodev->dev;
+ priv->ds->num_ports = DSA_MAX_PORTS;
priv->ds->priv = priv;
priv->ops = qca8k_switch_ops;
priv->ds->ops = &priv->ops;
@@ -444,9 +444,12 @@ static int realtek_smi_probe(struct platform_device *pdev)
return ret;
}
- smi->ds = dsa_switch_alloc(dev, smi->num_ports);
+ smi->ds = devm_kzalloc(dev, sizeof(*smi->ds), GFP_KERNEL);
if (!smi->ds)
return -ENOMEM;
+
+ smi->ds->dev = dev;
+ smi->ds->num_ports = smi->num_ports;
smi->ds->priv = smi;
smi->ds->ops = var->ds_ops;
@@ -2047,10 +2047,12 @@ static int sja1105_probe(struct spi_device *spi)
dev_info(dev, "Probed switch chip: %s\n", priv->info->name);
- ds = dsa_switch_alloc(dev, SJA1105_NUM_PORTS);
+ ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
if (!ds)
return -ENOMEM;
+ ds->dev = dev;
+ ds->num_ports = SJA1105_NUM_PORTS;
ds->ops = &sja1105_switch_ops;
ds->priv = priv;
priv->ds = ds;
@@ -1178,9 +1178,12 @@ int vsc73xx_probe(struct vsc73xx *vsc)
* We allocate 8 ports and avoid access to the nonexistant
* ports.
*/
- vsc->ds = dsa_switch_alloc(dev, 8);
+ vsc->ds = devm_kzalloc(dev, sizeof(*vsc->ds), GFP_KERNEL);
if (!vsc->ds)
return -ENOMEM;
+
+ vsc->ds->dev = dev;
+ vsc->ds->num_ports = 8;
vsc->ds->priv = vsc;
vsc->ds->ops = &vsc73xx_ds_ops;
@@ -577,7 +577,6 @@ static inline bool dsa_can_decode(const struct sk_buff *skb,
return false;
}
-struct dsa_switch *dsa_switch_alloc(struct device *dev, size_t n);
void dsa_unregister_switch(struct dsa_switch *ds);
int dsa_register_switch(struct dsa_switch *ds);
#ifdef CONFIG_PM_SLEEP
@@ -854,6 +854,12 @@ static int dsa_switch_probe(struct dsa_switch *ds)
struct device_node *np = ds->dev->of_node;
int err;
+ if (!ds->dev)
+ return -ENODEV;
+
+ if (!ds->num_ports)
+ return -EINVAL;
+
if (np)
err = dsa_switch_parse_of(ds, np);
else if (pdata)
@@ -867,21 +873,6 @@ static int dsa_switch_probe(struct dsa_switch *ds)
return dsa_switch_add(ds);
}
-struct dsa_switch *dsa_switch_alloc(struct device *dev, size_t n)
-{
- struct dsa_switch *ds;
-
- ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
- if (!ds)
- return NULL;
-
- ds->dev = dev;
- ds->num_ports = n;
-
- return ds;
-}
-EXPORT_SYMBOL_GPL(dsa_switch_alloc);
-
int dsa_register_switch(struct dsa_switch *ds)
{
int err;
Now that ports are dynamically listed in the fabric, there is no need to provide a special helper to allocate the dsa_switch structure. This will give more flexibility to drivers to embed this structure as they wish in their private structure. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> --- drivers/net/dsa/b53/b53_common.c | 5 ++++- drivers/net/dsa/dsa_loop.c | 5 ++++- drivers/net/dsa/lan9303-core.c | 4 +++- drivers/net/dsa/lantiq_gswip.c | 4 +++- drivers/net/dsa/microchip/ksz_common.c | 5 ++++- drivers/net/dsa/mt7530.c | 5 ++++- drivers/net/dsa/mv88e6060.c | 4 +++- drivers/net/dsa/mv88e6xxx/chip.c | 4 +++- drivers/net/dsa/qca8k.c | 5 ++++- drivers/net/dsa/realtek-smi-core.c | 5 ++++- drivers/net/dsa/sja1105/sja1105_main.c | 4 +++- drivers/net/dsa/vitesse-vsc73xx-core.c | 5 ++++- include/net/dsa.h | 1 - net/dsa/dsa2.c | 21 ++++++--------------- 14 files changed, 49 insertions(+), 28 deletions(-)