@@ -13,6 +13,7 @@
#include "qemu/osdep.h"
#include "qemu/units.h"
+#include "qemu/cutils.h"
#include "qapi/error.h"
#include "cpu.h"
#include "hw/arm/bcm2836.h"
@@ -29,8 +30,67 @@
#define FIRMWARE_ADDR_3 0x80000 /* Pi 3 loads kernel.img here by default */
#define SPINTABLE_ADDR 0xd8 /* Pi 3 bootloader spintable */
-/* Table of Linux board IDs for different Pi versions */
-static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44};
+enum BoardIdManufacturer {
+ M_SONY_UK = 0,
+ M_EMBEST = 2,
+};
+
+enum BoardIdChip {
+ C_BCM2835 = 0,
+ C_BCM2836 = 1,
+ C_BCM2837 = 2,
+};
+
+enum BoardIdType {
+ T_2B = 0x04,
+ T_3B = 0x08,
+};
+
+enum BoardIdRevision {
+ R_1_0 = 0,
+ R_1_1 = 1,
+ R_1_2 = 2,
+ R_1_3 = 3,
+};
+
+static const char *processor_typename[] = {
+ [C_BCM2836] = TYPE_BCM2836,
+ [C_BCM2837] = TYPE_BCM2837,
+};
+
+typedef struct BoardInfo BoardInfo;
+
+struct BoardInfo {
+ /* Table of Linux board IDs for different Pi versions */
+ int board_id;
+ /*
+ * Board revision codes:
+ * www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/
+ */
+ struct {
+ enum BoardIdType type;
+ enum BoardIdRevision revision;
+ enum BoardIdChip chip;
+ enum BoardIdManufacturer manufacturer;
+ } board_rev;
+ uint64_t ram_size_min;
+ uint64_t ram_size_max;
+};
+
+static const BoardInfo bcm283x_boards[] = {
+ [2] = {
+ .board_id = 0xc43,
+ .board_rev = { T_2B, R_1_1, C_BCM2836, M_EMBEST },
+ .ram_size_min = 1 * GiB,
+ .ram_size_max = 1 * GiB,
+ },
+ [3] = {
+ .board_id = 0xc44,
+ .board_rev = { T_3B, R_1_2, C_BCM2837, M_SONY_UK },
+ .ram_size_min = 1 * GiB,
+ .ram_size_max = 1 * GiB,
+ },
+};
typedef struct RasPiState {
BCM283XState soc;
@@ -116,7 +176,7 @@ static void setup_boot(MachineState *machine, int version, size_t ram_size)
static struct arm_boot_info binfo;
int r;
- binfo.board_id = raspi_boardid[version];
+ binfo.board_id = bcm283x_boards[version].board_id;
binfo.ram_size = ram_size;
binfo.nb_cpus = machine->smp.cpus;
@@ -148,7 +208,7 @@ static void setup_boot(MachineState *machine, int version, size_t ram_size)
* the normal Linux boot process
*/
if (machine->firmware) {
- hwaddr firmware_addr = version == 3 ? FIRMWARE_ADDR_3 : FIRMWARE_ADDR_2;
+ hwaddr firmware_addr = version >= 3 ? FIRMWARE_ADDR_3 : FIRMWARE_ADDR_2;
/* load the firmware image (typically kernel.img) */
r = load_image_targphys(machine->firmware, firmware_addr,
ram_size - firmware_addr);
@@ -172,16 +232,32 @@ static void raspi_init(MachineState *machine, int version)
BlockBackend *blk;
BusState *bus;
DeviceState *carddev;
+ char *size_str;
+ int board_rev;
+ const char *soc_type;
- if (machine->ram_size > 1 * GiB) {
+ if (machine->ram_size < bcm283x_boards[version].ram_size_min) {
+ size_str = size_to_str(bcm283x_boards[version].ram_size_min);
+ error_report("Requested ram size is too small for this machine: "
+ "minimum is %s", size_str);
+ g_free(size_str);
+ exit(1);
+ }
+ if (machine->ram_size > bcm283x_boards[version].ram_size_max) {
+ size_str = size_to_str(bcm283x_boards[version].ram_size_max);
error_report("Requested ram size is too large for this machine: "
- "maximum is 1GB");
+ "maximum is %s", size_str);
+ g_free(size_str);
+ exit(1);
+ }
+ if (!is_power_of_2(machine->ram_size)) {
+ error_report("Requested ram size is not a power of 2");
exit(1);
}
+ soc_type = processor_typename[bcm283x_boards[version].board_rev.chip];
object_initialize_child(OBJECT(machine), "soc", &s->soc, sizeof(s->soc),
- version == 3 ? TYPE_BCM2837 : TYPE_BCM2836,
- &error_abort, NULL);
+ soc_type, &error_abort, NULL);
/* Allocate and map RAM */
memory_region_allocate_system_memory(&s->ram, OBJECT(machine), "ram",
@@ -192,9 +268,14 @@ static void raspi_init(MachineState *machine, int version)
&error_abort);
object_property_set_int(OBJECT(&s->soc), machine->smp.cores,
"enabled-cores", &error_abort);
- int board_rev = version == 3 ? 0xa02082 : 0xa21041;
- object_property_set_int(OBJECT(&s->soc), board_rev, "board-rev",
- &error_abort);
+
+ board_rev = ((63 - clz64(machine->ram_size / MiB)) << 20)
+ | (bcm283x_boards[version].board_rev.manufacturer << 16)
+ | (bcm283x_boards[version].board_rev.chip << 12)
+ | (bcm283x_boards[version].board_rev.type << 4)
+ | (bcm283x_boards[version].board_rev.revision << 0);
+ object_property_set_int(OBJECT(&s->soc), board_rev,
+ "board-rev", &error_abort);
object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_abort);
/* Create and plug in the SD cards */
@@ -221,7 +302,7 @@ static void raspi2_init(MachineState *machine)
static void raspi2_machine_init(MachineClass *mc)
{
- mc->desc = "Raspberry Pi 2";
+ mc->desc = "Raspberry Pi 2B";
mc->init = raspi2_init;
mc->block_default_type = IF_SD;
mc->no_parallel = 1;
@@ -243,7 +324,7 @@ static void raspi3_init(MachineState *machine)
static void raspi3_machine_init(MachineClass *mc)
{
- mc->desc = "Raspberry Pi 3";
+ mc->desc = "Raspberry Pi 3B";
mc->init = raspi3_init;
mc->block_default_type = IF_SD;
mc->no_parallel = 1;
Our code currently create the raspi2 (based on the BCM2836) and the raspi3 (on the BCM2837). Similarly, the raspi4 is based on the BCM2838. To be able to add the new board, make the current code more modular: - Dynamically fills the 'board-rev' value - Allow DRAM sizes different than 1 GiB Rename the board model name as 'B' since this is the one encoded in the 'board-rev' tag. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/raspi.c | 107 +++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 94 insertions(+), 13 deletions(-)