diff mbox series

[v3,15/16] libqos: extract Legacy virtio-pci.c code

Message ID 20191019063810.6944-16-stefanha@redhat.com
State New
Headers show
Series libqos: add VIRTIO PCI 1.0 support | expand

Commit Message

Stefan Hajnoczi Oct. 19, 2019, 6:38 a.m. UTC
The current libqos virtio-pci.c code implements the VIRTIO Legacy
interface.  Extract existing code in preparation for VIRTIO 1.0 support.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
 tests/libqos/virtio-pci.h |  2 --
 tests/libqos/virtio-pci.c | 29 ++++++++++++-----------------
 2 files changed, 12 insertions(+), 19 deletions(-)

Comments

Philippe Mathieu-Daudé Oct. 21, 2019, 1:03 p.m. UTC | #1
On 10/19/19 8:38 AM, Stefan Hajnoczi wrote:
> The current libqos virtio-pci.c code implements the VIRTIO Legacy
> interface.  Extract existing code in preparation for VIRTIO 1.0 support.
> 
> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
> Reviewed-by: Sergio Lopez <slp@redhat.com>
> Reviewed-by: Thomas Huth <thuth@redhat.com>
> ---
>   tests/libqos/virtio-pci.h |  2 --
>   tests/libqos/virtio-pci.c | 29 ++++++++++++-----------------
>   2 files changed, 12 insertions(+), 19 deletions(-)
> 
> diff --git a/tests/libqos/virtio-pci.h b/tests/libqos/virtio-pci.h
> index 78a1c15c2a..6b3a385b06 100644
> --- a/tests/libqos/virtio-pci.h
> +++ b/tests/libqos/virtio-pci.h
> @@ -45,8 +45,6 @@ typedef struct QVirtQueuePCI {
>       uint32_t msix_data;
>   } QVirtQueuePCI;
>   
> -extern const QVirtioBus qvirtio_pci;
> -
>   void virtio_pci_init(QVirtioPCIDevice *dev, QPCIBus *bus, QPCIAddress * addr);
>   QVirtioPCIDevice *virtio_pci_new(QPCIBus *bus, QPCIAddress * addr);
>   
> diff --git a/tests/libqos/virtio-pci.c b/tests/libqos/virtio-pci.c
> index e9595603f5..11866f7772 100644
> --- a/tests/libqos/virtio-pci.c
> +++ b/tests/libqos/virtio-pci.c
> @@ -35,14 +35,6 @@
>    * original qvirtio_pci_destructor and qvirtio_pci_start_hw.
>    */
>   
> -static inline bool qvirtio_pci_is_big_endian(QVirtioPCIDevice *dev)
> -{
> -    QPCIBus *bus = dev->pdev->bus;
> -
> -    /* FIXME: virtio 1.0 is always little-endian */
> -    return qtest_big_endian(bus->qts);
> -}
> -
>   #define CONFIG_BASE(dev) (VIRTIO_PCI_CONFIG_OFF((dev)->pdev->msix_enabled))
>   
>   static uint8_t qvirtio_pci_config_readb(QVirtioDevice *d, uint64_t off)
> @@ -55,8 +47,7 @@ static uint8_t qvirtio_pci_config_readb(QVirtioDevice *d, uint64_t off)
>    * but virtio ( < 1.0) is in guest order
>    * so with a big-endian guest the order has been reversed,
>    * reverse it again
> - * virtio-1.0 is always little-endian, like PCI, but this
> - * case will be managed inside qvirtio_pci_is_big_endian()
> + * virtio-1.0 is always little-endian, like PCI
>    */
>   
>   static uint16_t qvirtio_pci_config_readw(QVirtioDevice *d, uint64_t off)
> @@ -262,7 +253,7 @@ static void qvirtio_pci_virtqueue_kick(QVirtioDevice *d, QVirtQueue *vq)
>       qpci_io_writew(dev->pdev, dev->bar, VIRTIO_PCI_QUEUE_NOTIFY, vq->index);
>   }
>   
> -const QVirtioBus qvirtio_pci = {
> +static const QVirtioBus qvirtio_pci_legacy = {
>       .config_readb = qvirtio_pci_config_readb,
>       .config_readw = qvirtio_pci_config_readw,
>       .config_readl = qvirtio_pci_config_readl,
> @@ -396,17 +387,21 @@ void qvirtio_pci_start_hw(QOSGraphObject *obj)
>       qvirtio_start_device(&dev->vdev);
>   }
>   
> +static void qvirtio_pci_init_legacy(QVirtioPCIDevice *dev)
> +{
> +    dev->vdev.device_type = qpci_config_readw(dev->pdev, PCI_SUBSYSTEM_ID);
> +    dev->bar_idx = 0;
> +    dev->vdev.bus = &qvirtio_pci_legacy;
> +    dev->msix_ops = &qvirtio_pci_msix_ops_legacy;
> +    dev->vdev.big_endian = qtest_big_endian(dev->pdev->bus->qts);
> +}
> +
>   static void qvirtio_pci_init_from_pcidev(QVirtioPCIDevice *dev, QPCIDevice *pci_dev)
>   {
>       dev->pdev = pci_dev;
> -    dev->vdev.device_type = qpci_config_readw(pci_dev, PCI_SUBSYSTEM_ID);
> -    dev->bar_idx = 0;
> -
>       dev->config_msix_entry = -1;
> -    dev->msix_ops = &qvirtio_pci_msix_ops_legacy;
>   
> -    dev->vdev.bus = &qvirtio_pci;
> -    dev->vdev.big_endian = qvirtio_pci_is_big_endian(dev);
> +    qvirtio_pci_init_legacy(dev);
>   
>       /* each virtio-xxx-pci device should override at least this function */
>       dev->obj.get_driver = NULL;
> 

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
diff mbox series

Patch

diff --git a/tests/libqos/virtio-pci.h b/tests/libqos/virtio-pci.h
index 78a1c15c2a..6b3a385b06 100644
--- a/tests/libqos/virtio-pci.h
+++ b/tests/libqos/virtio-pci.h
@@ -45,8 +45,6 @@  typedef struct QVirtQueuePCI {
     uint32_t msix_data;
 } QVirtQueuePCI;
 
-extern const QVirtioBus qvirtio_pci;
-
 void virtio_pci_init(QVirtioPCIDevice *dev, QPCIBus *bus, QPCIAddress * addr);
 QVirtioPCIDevice *virtio_pci_new(QPCIBus *bus, QPCIAddress * addr);
 
diff --git a/tests/libqos/virtio-pci.c b/tests/libqos/virtio-pci.c
index e9595603f5..11866f7772 100644
--- a/tests/libqos/virtio-pci.c
+++ b/tests/libqos/virtio-pci.c
@@ -35,14 +35,6 @@ 
  * original qvirtio_pci_destructor and qvirtio_pci_start_hw.
  */
 
-static inline bool qvirtio_pci_is_big_endian(QVirtioPCIDevice *dev)
-{
-    QPCIBus *bus = dev->pdev->bus;
-
-    /* FIXME: virtio 1.0 is always little-endian */
-    return qtest_big_endian(bus->qts);
-}
-
 #define CONFIG_BASE(dev) (VIRTIO_PCI_CONFIG_OFF((dev)->pdev->msix_enabled))
 
 static uint8_t qvirtio_pci_config_readb(QVirtioDevice *d, uint64_t off)
@@ -55,8 +47,7 @@  static uint8_t qvirtio_pci_config_readb(QVirtioDevice *d, uint64_t off)
  * but virtio ( < 1.0) is in guest order
  * so with a big-endian guest the order has been reversed,
  * reverse it again
- * virtio-1.0 is always little-endian, like PCI, but this
- * case will be managed inside qvirtio_pci_is_big_endian()
+ * virtio-1.0 is always little-endian, like PCI
  */
 
 static uint16_t qvirtio_pci_config_readw(QVirtioDevice *d, uint64_t off)
@@ -262,7 +253,7 @@  static void qvirtio_pci_virtqueue_kick(QVirtioDevice *d, QVirtQueue *vq)
     qpci_io_writew(dev->pdev, dev->bar, VIRTIO_PCI_QUEUE_NOTIFY, vq->index);
 }
 
-const QVirtioBus qvirtio_pci = {
+static const QVirtioBus qvirtio_pci_legacy = {
     .config_readb = qvirtio_pci_config_readb,
     .config_readw = qvirtio_pci_config_readw,
     .config_readl = qvirtio_pci_config_readl,
@@ -396,17 +387,21 @@  void qvirtio_pci_start_hw(QOSGraphObject *obj)
     qvirtio_start_device(&dev->vdev);
 }
 
+static void qvirtio_pci_init_legacy(QVirtioPCIDevice *dev)
+{
+    dev->vdev.device_type = qpci_config_readw(dev->pdev, PCI_SUBSYSTEM_ID);
+    dev->bar_idx = 0;
+    dev->vdev.bus = &qvirtio_pci_legacy;
+    dev->msix_ops = &qvirtio_pci_msix_ops_legacy;
+    dev->vdev.big_endian = qtest_big_endian(dev->pdev->bus->qts);
+}
+
 static void qvirtio_pci_init_from_pcidev(QVirtioPCIDevice *dev, QPCIDevice *pci_dev)
 {
     dev->pdev = pci_dev;
-    dev->vdev.device_type = qpci_config_readw(pci_dev, PCI_SUBSYSTEM_ID);
-    dev->bar_idx = 0;
-
     dev->config_msix_entry = -1;
-    dev->msix_ops = &qvirtio_pci_msix_ops_legacy;
 
-    dev->vdev.bus = &qvirtio_pci;
-    dev->vdev.big_endian = qvirtio_pci_is_big_endian(dev);
+    qvirtio_pci_init_legacy(dev);
 
     /* each virtio-xxx-pci device should override at least this function */
     dev->obj.get_driver = NULL;